Federal Aviation Administration August 2019 – Federal Register Recent Federal Regulation Documents

The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 airplanes. This proposed AD was prompted by the results of a structural analysis, which identified that the upper frame fittings (UFF) of the forward cargo door surrounding structure have a low fatigue life. This proposed AD would require repetitive inspections of the forward cargo door UFF and brackets for discrepancies and, depending on the findings, doing applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.

The FAA proposes to adopt a new airworthiness directive (AD) for all Fokker Services B.V. Model F28 Mark 0070 and 0100 airplanes. This proposed AD was prompted by reports of lavatory waste bin fire extinguishers found depleted. This proposed AD would require a one-time inspection of the installation of the waste bins for interference (the inspection also includes a weight check of the waste bin fire extinguisher and an inspection of the discharge tubes for damage), modification of affected waste bins, and replacement of affected fire extinguishers, as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. This proposed AD would also require replacement of the fire extinguisher if any damaged discharge tube is found or the weight of the waste bin fire extinguisher is too low. The FAA is proposing this AD to address the unsafe condition on these products.

This action amends Title 14 Code of Federal Regulations (14 CFR) part 71 relating to airspace designations to reflect the approval by the Director of the Federal Register of the incorporation by reference of FAA Order 7400.11D, Airspace Designations and Reporting Points. This action also explains the procedures the FAA will use to amend the listings of Class A, B, C, D, and E airspace areas; air traffic service routes; and reporting points incorporated by reference.

This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

The FAA is superseding Airworthiness Directive (AD) 2016-07- 22, which applied to all Airbus SAS Model A300 B4-600, B4-600R, and F4- 600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes); and Model A310 series airplanes. AD 2016-07-22 required modifying the electrical routing installation at the right-hand (RH) and left-hand (LH) wings to achieve a minimum distance between wiring bundles and surrounding structures. This new AD retains the requirements of AD 2016-07-22 and, for certain airplanes, adds a requirement to further modify the electrical installations in both wings, as specified in a European Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD was prompted by reports of missing installation information for certain airplanes. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is superseding Airworthiness Directive (AD) 2018-20- 06, which applied to certain Airbus SAS Model A300 F4-600R series airplanes. AD 2018-20-06 required repetitive high frequency eddy current (HFEC) inspections of the aft lower deck cargo door (LDCD) frame forks; a one-time check of the LDCD clearances; a one-time detailed visual inspection of hooks, eccentric bushes, and x-stops; and corrective actions if necessary. This AD retains the actions of AD 2018-20-06 and requires new compliance times, depending on frame fork configuration. This AD was prompted by a report of two adjacent frame forks that were found cracked on the aft LDCD of two airplanes during scheduled maintenance, and a determination that certain compliance times need to be revised. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA proposes to rule and invites public comment on the release of the aeronautical use only provision for land at the Fairbanks International Airport, Fairbanks, Alaska.

The FAA is superseding airworthiness directive (AD) 2018-25-01 for all Rolls-Royce plc (RR) Trent 1000-A, Trent 1000-C, Trent 1000-D, Trent 1000-E, Trent 1000-G, and Trent 1000-H turbofan model engines. AD 2018-25-01 required initial and repetitive inspections of the intermediate-pressure compressor (IPC) stage 1 rotor (R1) blades, IPC stage 2 rotor (R2) blades, and IPC shaft stage 2 dovetail posts, and removing any cracked parts from service. This AD retains those inspections, revises certain reinspection intervals, and adds certain engine models to the applicability. This AD was prompted by a determination by the manufacturer of the need to revise inspection intervals for certain affected engines. In addition, the FAA added recently validated additional engine models to the applicability. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA proposes to rule and invites public comment on the release of the aeronautical use only provision for land at the Fairbanks International Airport, Fairbanks, Alaska.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request Office of Management and Budget (OMB) renewal approval for information collection 2120-0765. Aircraft registration is necessary to ensure personal accountability among all users of the national airspace system. Aircraft registration also allows the FAA and law enforcement agencies to address non-compliance by providing the means for identifying an aircraft's owner and operator. This collection also permits individuals to de-register or update their record in the registration database.

These amended special conditions are issued for the Airbus Model A380 airplane. By issuance of this amendment to the special condition, the FAA is correcting an error that appeared in the Federal Register on August 28, 2006, for Special Conditions No. 25-326-SC, Docket No. NM314. This airplane will have novel or unusual design features when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is associated with the complex systems and the configuration of the airplane, including its full-length double deck. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A321-251N, A321-252N, A321-253N, A321-271N, A321-272N, A321-251NX, A321-252NX, A321-253NX, A321-271NX, and A321-272NX airplanes. This AD was prompted by analysis of the behavior of the elevator aileron computer (ELAC) L102 that revealed that excessive pitch attitude can occur in certain conditions and during specific maneuvers. This AD requires revising the airplane flight manual (AFM) to incorporate updated procedures and operational limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The collection involves requesting that small on-demand operators voluntarily provide the number of revenue passengers that boarded their aircraft at each airport annually. This information is used in determining an airport's category and eligibility for federal funding on an annual basis. It is not available through any other federal data source.

The FAA proposes to supersede Airworthiness Directive (AD) 2016-02-06 for Bell Helicopter Textron Canada Limited (Bell) Model 429 helicopters. AD 2016-02-06 requires inspecting certain tail rotor (T/R) pitch link bearing bores for corrosion and pitting. AD 2016-02-06 also requires a repetitive inspection of the sealant and repeating the inspections for corrosion and pitting if any sealant is missing. Since the FAA issued AD 2016-02-06, the FAA determined additional part-numbered T/R pitch link assemblies (links) are affected by the same unsafe condition and an additional repetitive inspection is necessary to address the unsafe condition. This proposed AD would retain the requirements of AD 2016-02-06, expand the applicability, and add a repetitive inspection. The actions of this proposed AD are intended to address an unsafe condition on these products.

This action proposes to revoke the Class E airspace designated as an extension to a Class C surface area at Lafayette Regional Airport/Paul Fournet Field, Lafayette, LA, and amend the Class E airspace extending upward from 700 feet above the surface at Lafayette Regional Airport/Paul Fournet Field and Acadiana Regional Airport, New Iberia, LA, which is contained within the Lafayette, LA, airspace legal description. The FAA is proposing this action as the result of the decommissioning of the Acadi non-directional beacon (NDB), which provided navigation information for the instrument procedures at Acadiana Regional Airport, and the development of new instrument procedures at Lafayette Regional Airport/Paul Fournet Field. The geographic coordinates of Lafayette Regional Airport/Paul Fournet Field and the names of Lafayette Regional Airport/Paul Fournet Field, Acadiana Regional Airport, and Abbeville Chris Crusta Memorial Airport, Abbeville, LA, which is contained within the Lafayette, LA, airspace legal description, would also be updated to coincide with the FAA's aeronautical database.

The FAA proposes to adopt a new airworthiness directive (AD) for all The Boeing Company Model 757 airplanes and Model 767-200, -300, and -300F series airplanes. This proposed AD was prompted by reports of excessively high flight deck or cabin temperatures. This proposed AD would require revising certificate limitations and operating procedures of the existing airplane flight manual (AFM), to provide the flightcrew with procedures for hot flight deck or cabin temperatures to follow under certain conditions. The FAA is proposing this AD to address the unsafe condition on these products.

The Federal Aviation Administration (FAA) received the final application from Hendry County and Airglades Airport, LLC for the participation of Airglades Airport (2IS) in the Airport Investment Partnership Program (formerly the Airport Privatization Pilot Program) and has determined that the final application is substantially complete and accepted for review. The determination that the application is substantially complete results in the commencement of FAA's review and is not an approval or disapproval of the proposed privatization application. The FAA is seeking information and comments from interested parties on the final application. The FAA will review the application, public comments, and any other relevant additional submission by the applicant or the public, and issue a decision approving or disapproving the application. Title 49 U.S.C. Section 47134 establishes the Airport Investment Partnership Program and authorizes the Department of Transportation to grant exemptions from certain Federal statutory and regulatory requirement for airport privatization projects. The application procedures require the FAA to publish a notice of receipt of the final application in the Federal Register and accept public comment on the final application for a period of 60 days. However, the 60-day notice period is not a statutory or regulatory requirement. The applicants have requested the comment period be reduced to 30 days because they desire to obtain approval, assuming the application is sufficient, by September 30, 2019. Under Section 184 of the FAA Reauthorization Act of 2018, approval of an application by this date (and the project meets all other requirements), would permit the agency to issue a letter of intent for Airport Improvement Program grant funds. FAA has agreed to reduce the comment period based on the applicants' request.

These special conditions are issued for the Mitsubishi Aircraft Corporation (Mitsubishi) Model MRJ-200 airplane. This airplane will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is avionics that allow internal and external connection to previously isolated data networks, which are connected to systems that perform functions required for the safe operation of the airplane. This feature creates a potential for unauthorized persons to access the aircraft-control domain and airline information-services domain, and presents security vulnerabilities related to the introduction of computer viruses and worms, user errors, and intentional sabotage of airplane electronic assets (networks, systems, and databases). The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This action modifies Class E airspace areas extending upward from 700 feet or more above the surface of the earth at Lakeland/Nobel F. Lee Memorial Field Airport in Minocqua-Woodruff, WI. The FAA is taking this action as the result of an airspace review caused by the decommissioning of the Arbor Vitae non-directional radio beacon (NDB). The geographic coordinates for the airport in the associated airspace are updated to coincide with the FAA's aeronautical database. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at these airports.

This action proposes to amend Class E airspace extending upward from 700 feet above the surface at Pittsfield Municipal Airport, Pittsfield, MA, to accommodate airspace reconfiguration due to the redesign of the Localizer Runway 26 approach. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at this airport. This action also would update the geographic coordinates of this airport.

These special conditions are issued for the Pilatus Aircraft Ltd. Model PC-12/47E airplane. This airplane will have a novel or unusual design feature associated with the use of an autothrust system. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. This AD was prompted by a report that main landing gear (MLG) side stay actuators have been assembled using nonconforming split ball bearings. This AD requires verification of the serial numbers of the installed MLG side stay actuator assemblies, and replacement of the affected parts. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is considering a proposal to change 8.712 acres of airport land from aeronautical use to non-aeronautical use and to authorize the sale of airport property located at Indianapolis International Airport, Indianapolis, Indiana. The aforementioned land is not needed for aeronautical use. The land consists of 6 original airport acquired parcels. The parcels were acquired under grants 3-18-0038-032, 3-18-0038-067, 3-18- 0038-083, 3-18-0038-094, and 3-18-0038-098 and local funding. There are no impacts to the airport by allowing the Indianapolis Airport Authority to dispose of the property. The land is not needed for future aeronautical development.

This action establishes Class E airspace extending upward from 700 feet above the surface at Primrose Heliport, Minersville, PA, to accommodate new area navigation (RNAV) global positioning system (GPS) standard instrument approach procedures serving this heliport. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at this heliport.