Federal Aviation Administration May 9, 2019 – Federal Register Recent Federal Regulation Documents

In accordance with the Paperwork Reduction Act of 1995, the FAA invites public comments on its proposed collection of information pursuant to changes to the FAA's commercial space transportation regulations proposed in the ``Streamlined Launch and Reentry Licensing Requirements'' notice of proposed rulemaking (NPRM). A copy of the NPRM is available in the docket for this notice. This information collection would consolidate two previously approved information collections under one, new OMB Control Number. This collection would allow the FAA to continue ensuring commercial space activities do not unduly jeopardize public health and safety, safety of property, or the national security and foreign policy interests of the United States. The FAA intends to request the Office of Management and Budget's approval of this information collection.

We are adopting a new airworthiness directive (AD) for certain Viking Air Limited Model CL-215-6B11 (CL-215T Variant) and CL-215-6B11 (CL-415 Variant) airplanes. This AD was prompted by a report that a supplier fabricated Teflon parts with a charge of 15 percent fiberglass content instead of the specified 5 percent fiberglass content. This AD requires repetitive detailed visual inspections of the aileron control system cables and flap interconnect system cables for damage or disconnected cables, corrective actions if necessary, and replacement of the Teflon parts in the aileron control systems, aileron/rudder interconnect, and aileron power unit beam. The replacement of these parts terminates the repetitive inspections. We are issuing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by reports of cracking in the frame web, frame integral inboard chord, and fail-safe chord on multiple airplanes in multiple locations between stringers S-10 and S- 17 above the passenger floor, in addition to an evaluation by the design approval holder (DAH) indicating that certain fuselage frame splices are subject to widespread fatigue damage (WFD). This AD requires repetitive inspections of certain fuselage upper frames, side frames, fail-safe chords, inboard chords, frame webs, and stringers; an inspection for open tooling holes and the presence of repairs in certain inspection zones; and applicable on-condition actions. We are issuing this AD to address the unsafe condition on these products.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request Office of Management and Budget (OMB) renewal approval for information collection 2120-0765. Aircraft registration is necessary to ensure personal accountability among all users of the national airspace system. Aircraft registration also allows the FAA and law enforcement agencies to address non-compliance by providing the means for identifying an aircraft's owner and operator. This collection also permits individuals to de-register or update their record in the registration database.

This action modifies the Class E airspace extending upward from 700 feet above the surface at Manitowoc County Airport, Manitowoc, WI, and Sheboygan County Memorial Airport, Sheboygan, WI. This action is due to an airspace review caused by the decommissioning of the Manitowoc VHF omnidirectional range (VOR), which provided navigation information to the instrument procedures at these airports, as part of the VOR Minimum Operational Network (MON) Program. The geographic coordinates of Sheboygan County Memorial Airport are also being updated to coincide with the FAA's aeronautic database. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at these airports.

This action proposes to remove Class E airspace extending upward from 700 feet above the surface at Sioux Center Municipal Airport, Sioux Center, IA. The FAA is proposing this action due to the closure of the airport and cancellation of the instrument procedures; and the airspace is longer required.

We propose to supersede Airworthiness Directive (AD) 2002-07- 05, which applies to all Airbus Model A300 B2, A300 B4, A300 B4-600, and A300 B4-600R series airplanes, and Model A300 F4-605R airplanes. AD 2002-07-05 requires repetitive inspections for cracking of certain fittings, corrective action if necessary, and, for certain airplanes, a modification. AD 2002-07-05 also provides an optional terminating action for the repetitive inspections. Since we issued AD 2002-07-05, we determined that, for certain airplanes, the existing inspection compliance times were not sufficient to address the unsafe condition and needed to be reduced. This proposed AD would require repetitive inspections for cracking of certain fittings, corrective actions if necessary, and, for certain airplanes, a modification, as specified in an European Aviation Safety Agency (EASA) AD, which will be incorporated by reference. We are proposing this AD to address the unsafe condition on these products.