Federal Aviation Administration February 2018 – Federal Register Recent Federal Regulation Documents

Results 101 - 128 of 128
Airworthiness Directives; Bombardier, Inc., Airplanes
Document Number: 2018-02088
Type: Proposed Rule
Date: 2018-02-08
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-1A11 (CL-600), CL-600-2A12 (CL- 601 Variant), and CL-600-2B16 (CL-601-3A, CL-601-3R, and CL-604 Variants) airplanes. This proposed AD was prompted by a determination that the safe life limits of the horizontal stabilizer trim actuator (HSTA) attachment pins and trunnions were not listed in certain airworthiness limitations (AWLs) and that the HSTA attachment pins and trunnions were not serialized. This proposed AD would require revision of the maintenance or inspection program, as applicable, to include the latest revision of the AWLs, serialization of the HSTA attachment pins and trunnions, and repair or replacement of damaged HSTA attachment pins and trunnions. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2018-02085
Type: Proposed Rule
Date: 2018-02-08
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 727 airplanes. This proposed AD was prompted by significant changes made to the airworthiness limitations (AWLs) related to fuel tank ignition prevention. This proposed AD would require revising the maintenance or inspection program, as applicable, to incorporate the latest revision of the AWLs. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
Document Number: 2018-02084
Type: Proposed Rule
Date: 2018-02-08
Agency: Federal Aviation Administration, Department of Transportation
We propose to supersede Airworthiness Directive (AD) 2016-23- 01, which applies to all Airbus Model A310 series airplanes. AD 2016- 23-01 requires repetitive detailed inspections for cracking around the fastener holes in certain areas of the wing top skin panels, supplemental repetitive ultrasonic inspections for cracking around the fastener holes in certain other areas of the wing top skin panels, and repair if necessary. Since we issued AD 2016-23-01, an evaluation done by the design approval holder (DAH) indicates that the wing top skin panel attachment holes at a certain area are also subject to widespread fatigue damage (WFD). This proposed AD would add an inspection and modification of the attachment holes of the wing top skin panels at a certain area. This proposed AD also includes terminating action for certain inspections. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
Document Number: 2018-02018
Type: Proposed Rule
Date: 2018-02-08
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all Airbus Model A310-203, -221, -222, -304, -322, -324, and -325 airplanes. This proposed AD was prompted by a design approval holder (DAH) evaluation indicating that the outer wing lower junction is subject to widespread fatigue damage (WFD). This proposed AD would require modifying the fastener holes at certain locations, which includes related investigative actions and applicable corrective actions. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; 328 Support Services GmbH (Type Certificate Previously Held by AvCraft Aerospace GmbH; Fairchild Dornier GmbH; Dornier Luftfahrt GmbH) Airplanes
Document Number: 2018-02016
Type: Rule
Date: 2018-02-08
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain 328 Support Services GmbH Model 328-300 airplanes. This AD requires contacting the FAA to obtain instructions for addressing the unsafe condition on these products, and doing the actions specified in those instructions. This AD was prompted by a determination that incomplete inspection instructions exist for the skin under outer and inner doublers left installed after the removal of a certain data link system. We are issuing this AD to address the unsafe condition on these products.
Nineteenth Tactical Operations Committee (TOC) Meeting
Document Number: 2018-02385
Type: Notice
Date: 2018-02-07
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of the Nineteenth TOC Meeting.
Airworthiness Directives; Airbus Airplanes
Document Number: 2018-02357
Type: Rule
Date: 2018-02-07
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Airbus Model A321-211 and -231 airplanes. This AD requires contacting the FAA to obtain instructions for addressing the unsafe condition on these products, and doing the actions specified in those instructions. This AD was prompted by a determination that the flat-headed pin at the upper attachment point of the overhead stowage compartments at a certain frame may not sustain the maximum weight load for each flight phase. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
Document Number: 2018-02354
Type: Rule
Date: 2018-02-07
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Airbus Model A330-202, -203, -223, and -243 airplanes; and Model A340- 211, -212, -311, and -313 airplanes. This AD requires contacting the FAA to obtain instructions for addressing the unsafe condition on these products, and doing the actions specified in those instructions. This AD was prompted by a report of a hard contact that was found between the constant speed motor/generator feeder line route 6G/6E and the optional cabin temperature control pipe on the upper shell between certain frames. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
Document Number: 2018-02352
Type: Rule
Date: 2018-02-07
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2005-19-28, which applied to certain Airbus Model A330-301, -321, -322, -341, and - 342 airplanes; and Model A340-200 and A340-300 series airplanes. AD 2005-19-28 required repetitive inspections for cracks in the aft face of the rear spar at the area adjacent to the bolt holes and the end of the build slot, and repair if necessary. AD 2005-19-28 also provided an optional terminating action for the repetitive inspections. This new AD was prompted by the results of a new fatigue and damage tolerance assessment, which determined that several compliance thresholds and intervals needed to be reduced. This AD requires contacting the FAA to obtain instructions for addressing the unsafe condition on these products, and doing the actions specified in those instructions. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
Document Number: 2018-02350
Type: Rule
Date: 2018-02-07
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2015-02-18, which applied to all Airbus Model A330-201, -202, -203, -301, -302, and -303 airplanes. AD 2015-02-18 required a one-time ultrasonic inspection for fractures of all aft mount-pylon bolts of each engine. This new AD was prompted by the failure of a bolt on the aft engine mount upper beam, which was found to be caused by inappropriate in-production upper beam installation. This AD requires contacting the FAA to obtain instructions for addressing the unsafe condition on these products, and doing the actions specified in those instructions. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
Document Number: 2018-02364
Type: Rule
Date: 2018-02-06
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Airbus Model A318, A319, and A320 series airplanes and Model A321-111, -112, -131, -211, -212, -213, -231, -232 airplanes. This AD requires revising the airplane flight manual (AFM) to provide guidance to the flight crew for emergency procedures when erroneous airspeed indications are displayed on the back-up speed scale (BUSS). This AD was prompted by a determination that, when two angle of attack (AoA) sensors are adversely affected by icing conditions at the same time, data displayed on the BUSS could be erroneous. We are issuing this AD to address the unsafe condition on these products.
Notice of Release From Federal Surplus Property and Grant Assurance Obligations at Charles M. Shulz-Sonoma County Airport (STS), California
Document Number: 2018-02334
Type: Notice
Date: 2018-02-06
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration (FAA) proposes to rule and invites public comment on the application for a land use change of approximately 14.5 acres of airport property at the Charles M. Shulz Sonoma County Airport (STS), Santa Rosa, California from the conditions for aviation use contained in the Surplus Property Deed and Grant Assurances because the parcel of land is needed for other than airport operational purposes. The parcel is located outside the airport's Active Operations Area (AOA) and separated from the AOA by the airport's perimeter fence. The 14.5 acres of airport land is presently being utilized by Sonoma County, the owner of STS, as a mitigation preserve and is identified as a suitable location for the United States Fish and Wildlife Service (USFWS) required 2.0 acres mitigation for the STS Runway Safety Area (RSA) Improvement Project. The County proposed non-aeronautical use will be compatible with the airport and will not interfere with the airport or its operation.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: General Aviation and Air Taxi Activity and Avionics Survey
Document Number: 2018-02311
Type: Notice
Date: 2018-02-06
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. This information will be used by FAA for safety assessment, planning, forecasting, cost/benefit analysis, and to target areas for research.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Advanced Qualification Program (AQP)
Document Number: 2018-02310
Type: Notice
Date: 2018-02-06
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Advanced Qualification Program uses data driven quality control processes for validating and maintaining the effectiveness of air carrier training program curriculum content.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Special Flight Rules in the Vicinity of Grand Canyon National Park
Document Number: 2018-02309
Type: Notice
Date: 2018-02-06
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The FAA will use the information it collects and reviews to monitor compliance with the regulations regarding air tours in the Grand Canyon National Park.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Reporting of Information Using Special Airworthiness Information Bulletin
Document Number: 2018-02308
Type: Notice
Date: 2018-02-06
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The FAA issues Special Airworthiness Information Bulletins (SAIBs) to alert, educate, and make recommendations to the aviation community and individual aircraft owners/operators on ways to improve products. They may include requests for reporting of results from requested actions/inspections.
Notice of Modification to Previously Published Notice of Intent To Prepare an Environmental Assessment
Document Number: 2018-02132
Type: Notice
Date: 2018-02-02
Agency: Federal Aviation Administration, Department of Transportation
The FAA is publishing this notice to advise the public of a modification to the Notice of Intent to Prepare an Environmental Assessment (EA) and notice of opportunity for public comment published in the Federal Register on April 21, 2014, at 79 FR 22177. Specifically, FAA is withdrawing Wildlife Fence Project from the scope of the EA, and the project will be subject instead to a discrete environmental review.
Proposed Establishment of Class E Airspace, Amendment of Class D Airspace, and Revocation of Class E Airspace; Tacoma, WA
Document Number: 2018-02021
Type: Proposed Rule
Date: 2018-02-02
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to establish Class E surface area airspace, and Class E airspace extending upward from 700 feet above the surface at Tacoma Narrows Airport, Tacoma, WA. This proposal also would remove Class E airspace designated as an extension at Tacoma Narrows Airport. Additionally, this action would update the geographic coordinates of the airport in Class D airspace, and make an editorial change to the Class D description replacing Airport/Facility Directory with the term Chart Supplement. These changes are necessary to accommodate airspace redesign for the safety and management of instrument flight rules (IFR) operations within the National Airspace System.
Amendment of Class E Airspace; for the Following Ohio Towns; Millersburg, OH and Coshocton, OH
Document Number: 2018-02017
Type: Rule
Date: 2018-02-02
Agency: Federal Aviation Administration, Department of Transportation
This action amends Class E airspace extending upward from 700 feet above the surface at Holmes County Airport, Millersburg, OH; and at Richard Downing Airport, Coshocton, OH due to the decommissioning of Tiverton VHF Omnidirectional Range (VOR) and Distance Measuring Equipment (DME), cancellation of the VOR approaches, and implementation of area navigation (RNAV) procedures have made this action necessary for the safety and management of instrument flight rules (IFR) operations at these airports. Additionally, the geographic coordinates at Richard Downing Airport and Holmes County Airport would be adjusted to coincide with the FAA's aeronautical database.
Proposed Amendment of Class D and E Airspace; Casper, WY
Document Number: 2018-02013
Type: Proposed Rule
Date: 2018-02-02
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to amend controlled airspace at Casper/ Natrona County International Airport, Casper WY. After a biennial review, the FAA proposes to enlarge Class D airspace; remove Class E airspace designated as an extension, reduce Class E airspace extending upward from 700 feet above the surface, and remove Class E airspace extending upward from 1,200 feet above the surface. Also, this action would update the airport's name and geographic coordinates for the associated Class D and E airspace areas to reflect the FAA's current aeronautical database. These proposed changes would enhance safety and management of instrument flight rules (IFR) operations at the airport.
Proposed Amendment of Class D and Class E Airspace; Atwater, CA
Document Number: 2018-02012
Type: Proposed Rule
Date: 2018-02-02
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to amend Class D airspace, and Class E airspace extending upward from 700 feet above the surface at Castle Airport, Atwater, CA, to accommodate airspace redesign due to the decommissioning of the El Nido VHF Omnidirectional Range/Distance Measuring Equipment (VOR/DME) as the FAA transitions from ground-based to satellite-based navigation. Also, this action would update the airport's geographic coordinates to match the FAA's aeronautical database. This action also would make an editorial change to the Class D airspace legal description replacing ``Airport/Facility Directory'' with the term ``Chart Supplement''. These actions are necessary for the safety and management of instrument flight rules (IFR) operations at the airport.
Public Notice for a Change in Use of Aeronautical Property at Los Angeles International Airport, Los Angeles, California
Document Number: 2018-02014
Type: Notice
Date: 2018-02-01
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration (FAA) is requesting public comment on Los Angeles World Airports' (LAWA) request to change approximately 5 acres of airport property from aeronautical use to non- aeronautical use. The property is located at the northeast intersection of Westchester Parkway and Falmouth Avenue. The property is currently vacant land with no structures onsite. LAWA requests to develop the land with the Argo Drain Sub-Basin Facility. The Sub-Basin Facility is primarily an underground storm water treatment facility designed to potentially allow open space uses on the surface. The Sub-Basin Facility also includes two above-ground elements: A pump facility and blower building. Documents reflecting the LAWA's request are available, by appointment only, at the FAA Los Angeles Airports District Office.
Special Conditions: Gulfstream Aerospace Corporation Model GVII-G500 Airplanes; Operation Without Normal Electrical Power
Document Number: 2018-01963
Type: Rule
Date: 2018-02-01
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued for the Gulfstream Aerospace Corporation (Gulfstream) Model GVII-G500 airplane. This airplane will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport-category airplanes. This design feature is an electronic flight-control system, the functions of which are dependent upon the airplane's electrical power generation and distribution systems. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Airworthiness Directives; Textron Aviation Inc. Airplanes
Document Number: 2018-01923
Type: Proposed Rule
Date: 2018-02-01
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Textron Aviation Inc. Models 172N, 172P, 172Q, 172RG, F172N, F172P, FR172K, R172K, 182E, 182F, 182G, 182H, 182J, 182K, 182L, 182M, 182N, 182P, 182Q, 182R, T182, F182P, F182Q, F182RG, R182, TR182, 206, P206/TP206, U206/TU206, 207/T207, 210-5 (205), 210-5A (205A), 210B, 210C, 210D, 210E, 210F, and T210F airplanes. This proposed AD was prompted by a report of cracks found in the lower area of the forward cabin doorpost bulkhead. This proposed AD would require repetitively inspecting the lower forward doorpost at the strut attach fitting for cracks and making all necessary repairs. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Rolls-Royce Corporation Turboshaft Engines
Document Number: 2018-01900
Type: Proposed Rule
Date: 2018-02-01
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Rolls-Royce Corporation (RRC) model 250-C turboshaft engines. This proposed AD was prompted by several reports of engine power loss, one of which resulted in a fatal helicopter accident. This proposed AD would require removal of the bearing assembly, part number (P/N) 2544198, in the power turbine governor (PTG) and its replacement with a bearing assembly eligible for installation. We are proposing this AD to address the unsafe condition on these products.
Proposed Establishment of Class D and E Airspace, and Amendment of Class E Airspace; Austin, TX
Document Number: 2018-01796
Type: Proposed Rule
Date: 2018-02-01
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to establish Class D airspace, Class E surface airspace, and amend Class E airspace extending upward from 700 feet above the surface at Austin Executive Airport, Austin, TX. The FAA conducted an airspace review and determined that airspace redesign is necessary due to the establishment of an air traffic control tower at the airport. This action would enhance the safety and management of instrument flight rules (IFR) operation at the airport. An editorial change also would be made removing the city associated with the airport name in the airspace designation.
Proposed Amendment of Class D and E Airspace; Kansas City, MO; and Revocation of Class E Airspace; Kansas City, MO
Document Number: 2018-01795
Type: Proposed Rule
Date: 2018-02-01
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to amend Class D airspace at Charles B. Wheeler Downtown Airport, Kansas City, MO; remove Class E airspace designated as an extension to Class D airspace at Charles B. Wheeler Downtown Airport; and amend Class E airspace extending upward from 700 feet above the surface at Kansas City International Airport, Kansas City, MO, and Charles B. Wheeler Downtown Airport. The FAA is proposing this action due to the decommissioning of the Riverside VHF omnidirectional range (VOR) facility, which provided navigation guidance for the instrument procedures to Charles B. Wheeler Downtown Airport. The VOR has been decommissioned as part of the VOR Minimum Operational Network (MON) Program. This action also would amend the airspace designations of Class D airspace and Class E airspace extending upward from 700 feet above the surface for these airports. Additionally, the geographic coordinates and airport name are being updated to coincide with the FAA's aeronautical database. This action is necessary for the safety and management of instrument flight rules (IFR) operations at these airports.
Amendment of Class E Airspace; Carrabassett, ME
Document Number: 2018-01679
Type: Rule
Date: 2018-02-01
Agency: Federal Aviation Administration, Department of Transportation
This action amends Class E airspace at Carrabassett, ME, due to the new arrival procedure established for Sugarloaf Regional Airport. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at the airport. This action also updates the geographic coordinates of the airport.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.