Federal Aviation Administration March 3, 2017 – Federal Register Recent Federal Regulation Documents

We propose to adopt a new airworthiness directive (AD) for Airbus Helicopters Model AS332C, AS332C1, AS332L, AS332L1, AS332L2, and EC225LP helicopters. This proposed AD would require inspecting the sliding cabin doors. This proposed AD is prompted by the failure of the sliding door's jettison mechanism due to corrosion. The proposed actions are intended to address the unsafe condition in these products.

We are adopting a new airworthiness directive (AD) for certain Airbus Model A318-112 airplanes; Model A319-111, -112, -115, -132, and -133 airplanes; Model A320-214, -232, and -233 airplanes; and Model A321-211, -212, -213, -231, and -232 airplanes. This AD was prompted by a quality control review on the final assembly line, which determined that the wrong aluminum alloy was used to manufacture several structural parts. This AD requires a one-time eddy current conductivity measurement of certain cabin and cargo compartment structural parts to determine if an incorrect aluminum alloy was used, and replacement if necessary. We are issuing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 767-200 and -300 series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that the frame-to-floor-beam joints and frames common to shear ties at certain locations of fuselage structure are subject to widespread fatigue damage (WFD). This AD requires inspections for cracking of certain frame inner chords and webs common to the floor beam joint and at frames common to the shear ties at certain sections, and corrective action if necessary. We are issuing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for Pilatus Aircraft Ltd. Models PC-6, PC-6-H1, PC-6-H2, PC-6/350, PC-6/350-H1, PC- 6/350-H2, PC-6/A, PC-6/A-H1, PC-6/A-H2, PC-6/B-H2, PC-6/B1-H2, PC-6/B2- H2, PC-6/B2-H4, PC-6/C-H2, and PC-6/C1-H2 airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as certain combinations of the aileron counterweight and the attaching parts possibly resulting in reduced thread engagement and leading to disconnection of the aileron counterweight from the aileron. We are issuing this AD to require actions to address the unsafe condition on these products.