Federal Aviation Administration April 15, 2015 – Federal Register Recent Federal Regulation Documents
Results 1 - 4 of 4
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Type Certification Procedures for Changed Products
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on December 22, 2014. 14 CFR part 21 may require applicants to demonstrate compliance with the latest regulations in effect on the date of application for amended Type Certificates (TC) or a Supplemental TCs for aeronautical products.
Airworthiness Directives; Airbus Airplanes
We propose to adopt a new airworthiness directive (AD) for certain Airbus Model A318, A319, and A320 series airplanes modified by a particular supplemental type certificate (STC). This proposed AD was prompted by reports of cracks found during inspections of the in-flight entertainment system radome assembly. This proposed AD would require repetitive detailed inspections for cracks in the radome assembly, and replacement of the radome if necessary. We are proposing this AD to detect and correct cracks in the radome assembly, which could result in the radome (or pieces) separating from the airplane and striking the tail, consequently reducing the controllability of the airplane.
Airworthiness Directives; The Boeing Company Airplanes
We propose to supersede Airworthiness Directive (AD) 2013-23- 03, which applies to certain The Boeing Company Model 747-100, 747- 100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, and 747SR series airplanes. AD 2013-23-03 currently requires doing a detailed inspection of certain attach fittings for a cylindrical defect and replacing if necessary. Since we issued AD 2013- 23-03, we received a report that a machining defect was also found on some of the actuator assemblies inspected during manufacture. This defect could lead to fatigue cracking and subsequent fracture. For certain airplanes, this proposed AD would mandate new inspections of the inboard actuator attach fittings for machining defects, and overhaul or replacement, if necessary. This proposed AD would also limit the compliance time for doing the replacement for certain other airplanes. We are proposing this AD to detect and correct defective inboard actuator attach fittings which, combined with loss of the outboard actuator load path, could result in uncontrolled retraction of the outboard flap, damage to flight control systems, and consequent reduced controllability of the airplane.
Airworthiness Directives; Bombardier, Inc. Airplanes
We propose to supersede Airworthiness Directive (AD) 2011-07- 10, for certain Bombardier, Inc. Model BD-100-1A10 (Challenger 300) airplanes. AD 2011-07-10 currently requires revising the Airworthiness Limitations section of the Instructions for Continued Airworthiness; doing detailed visual inspections; removing discrepant material; cleaning the surfaces of the valves, the plug of the sensing port, and the cabin pressure-sensing port plug; securing the insulation; installing a new safety valve, and replacing certain cabin pressure-sensing port plugs. Since we issued AD 2011-07-10, we have received reports of in-flight loss of cabin pressurization that was attributed to partial blockage of a safety valve cabin pressure-sensing port in conjunction with a failed safety valve manometric capsule. This proposed AD would retain all requirements of AD 2011-07-10. This proposed AD would also require a detailed visual inspection of both safety valves and the surrounding area for foreign material, room temperature vulcanizing (RTV) silicone, contamination, foam on the bulkhead structure, tape or insulation, and loose material; and corrective actions if necessary. We are proposing this AD to detect and correct blockage of a safety valve cabin pressure-sensing port, which could result in loss of cabin pressure.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
