Federal Aviation Administration 2014 – Federal Register Recent Federal Regulation Documents

Results 201 - 250 of 1,506
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Aircraft Registration
Document Number: 2014-26395
Type: Notice
Date: 2014-11-06
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval for to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on September 3, 2014, vol. 79, no. 170, page 52404. The information collected is used by the FAA to register aircraft or hold an aircraft in trust. The information required to register and prove ownership of an aircraft is required by any person wishing to register an aircraft.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Rotorcraft External Load Operator Certificate Application
Document Number: 2014-26393
Type: Notice
Date: 2014-11-06
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on September 3, 2009, vol. 79, no. 170, page 52406. Information required from the public by 14 CFR part 133 is used by the FAA to process the operating certificate as a record of aircraft authorized for use, and to monitor Rotorcraft External-Load Operations.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: General Aviation Awards Program
Document Number: 2014-26387
Type: Notice
Date: 2014-11-06
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on September 3, 2014, vol. 79, no. 170, page 52405. The collection is used to nominate private citizens for recognition of their significant voluntary contribution to aviation education and flight safety.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Commercial Space Transportation Licensing Regulations
Document Number: 2014-26386
Type: Notice
Date: 2014-11-06
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on September 3, 2014, vol. 79, no. 170, pages 52405-52406. The information will determine if applicant proposals for conducting commercial space launches can be accomplished according to regulations issued by the Office of the Associate Administrator for Commercial Space Transportation.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Reduced Vertical Separation Minimum
Document Number: 2014-26385
Type: Notice
Date: 2014-11-06
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. Aircraft operators seeking operational approval to conduct RVSM operations within the 48 contiguous United States (U.S.), Alaska and a portion of the Gulf of Mexico must submit an application to the Certificate Holding District Office.
Petition for Exemption; Summary of Petition Received
Document Number: 2014-26358
Type: Notice
Date: 2014-11-06
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Airworthiness Directives; Airbus Airplanes
Document Number: 2014-26356
Type: Rule
Date: 2014-11-06
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2005-23-08 for certain Airbus Model A300 B4-605R and B4-622R airplanes; Model A300 F4- 605R airplanes; and Model A300 C4-605R Variant F airplanes. AD 2005-23- 08 required repetitive inspections to detect cracks of certain attachment holes, installation of new fasteners, follow-on inspections or repair if necessary, and modification of the angle fittings of fuselage frame FR47. This new AD adds new repetitive ultrasonic inspections for cracks of the center wing box lower panel; and repair if necessary. This new AD also removes certain airplanes from the applicability. This AD was prompted by reports of cracks found on the horizontal flange of the Frame 47 internal corner angle fitting while accomplishing the modification required by AD 2005-23-08. We are issuing this AD to detect and correct fatigue cracking of the forward fitting of fuselage frame FR47, which could result in reduced structural integrity of the frame.
Special Conditions: Airbus A350-900 Series Airplane; Interaction of Systems and Structures
Document Number: 2014-26341
Type: Rule
Date: 2014-11-06
Agency: Federal Aviation Administration, Department of Transportation
This document corrects errors that appeared in final special conditions docket no. FAA-2013-0894, which was published in the Federal Register on December 20, 2013 (78 FR 76980). The errors are in the document's special conditions stage (notice vs. final) and special conditions number.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2014-26331
Type: Rule
Date: 2014-11-06
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model DC-9-10, DC-9-20, DC-9-30, DC-9-40, and DC-9- 50 series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that the bulkhead dome tees, which connect the bulkhead web to the fuselage, are subject to widespread fatigue damage (WFD). This AD requires repetitive inspections of the improved ventral aft pressure bulkhead tees, and replacement if necessary. We are issuing this AD to detect and correct fatigue cracking of the bulkhead dome tees, which could result in reduced structural integrity and rapid decompression of the airplane.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2014-26330
Type: Rule
Date: 2014-11-06
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model DC-9-10, DC-9-20, and DC-9-30 series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that the improved (shot-peened) aft fuselage non-ventral pressure bulkhead tee is subject to widespread fatigue damage (WFD). This AD requires repetitive inspections for cracking of the improved (shot-peened) non-ventral aft pressure bulkhead tees, and replacement if necessary. We are issuing this AD to detect and correct fatigue cracking of the improved (shot-peened) non-ventral aft pressure bulkhead tees connecting the bulkhead web to the fuselage, which could result in reduced structural integrity and rapid decompression of the airplane.
Establishment and Amendment of Class D and E Airspace; Santa Rosa, CA
Document Number: 2014-26283
Type: Rule
Date: 2014-11-06
Agency: Federal Aviation Administration, Department of Transportation
This action establishes Class E airspace and modifies Class D and E airspace at Charles M. Schulz-Sonoma County Airport, Santa Rosa, CA. This action, initiated by the FAAs biennial review of the airspace area, enhances the safety and management of instrument flight rules (IFR) operations at the airport. Class D and E airspace is amended to reflect the airport's name change. Also, a minor adjustment is made to the geographic coordinates of the airport.
Airworthiness Directives; Airbus Airplanes
Document Number: 2014-24964
Type: Rule
Date: 2014-11-06
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2013-10-06, for all Airbus Model A330-200 Freighter, A330-200, A330-300, A340-200, A340-300, A340-500, and A340-600 series airplanes. AD 2013-10-06 required an inspection to identify the installed windshields, and replacement of any affected windshield. This new AD requires expanding the inspection area to 15 additional windshields' serial numbers. This AD was prompted by several reports of a burning smell and/or smoke in the cockpit during cruise phase, leading in some cases, to diversion to alternate airports. We are issuing this AD to prevent significantly increased workload for the flightcrew, which could, under some flight phases and/or circumstances, constitute an unsafe condition.
Seventh Meeting: RTCA Tactical Operations Committee (TOC)
Document Number: 2014-26303
Type: Notice
Date: 2014-11-05
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of the seventh meeting of the RTCA Tactical Operations Committee.
Special Conditions: Airbus Model A350-900 Series Airplane; Flight-Envelope Protection (Icing and Non-Icing Conditions); High-Incidence Protection and Alpha-Floor Systems
Document Number: 2014-26289
Type: Rule
Date: 2014-11-05
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued for Airbus Model A350-900 series airplanes. These airplanes will have novel or unusual design features, associated with flight-envelope protection in icing and non- icing conditions, that use low-speed incidence protection and an alpha- floor function that automatically advances throttles whenever the airplane angle of attack reaches a predetermined value. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Twelfth Meeting: RTCA Special Committee 227, Standards of Navigation Performance
Document Number: 2014-26269
Type: Notice
Date: 2014-11-04
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of the twelfth meeting of the RTCA Special Committee 227, Standards of Navigation Performance.
Advisory Circular for Aviation Safety Action Program (ASAP)
Document Number: 2014-26212
Type: Proposed Rule
Date: 2014-11-04
Agency: Federal Aviation Administration, Department of Transportation
This action extends the comment period for the Notice of availability of proposed revision to Advisory Circular for Aviation Safety Action Program (ASAP) that was published on September 5, 2014. In that document, the FAA proposed to clarify FAA policy, facilitate achievement of an ASAP's safety goals, and encourage wider participation in the program. Multiple industry groups have requested that the FAA extend the comment period closing date to allow time to prepare comments.
Airplane and Engine Certification Requirements in Supercooled Large Drop, Mixed Phase, and Ice Crystal Icing Conditions
Document Number: 2014-25789
Type: Rule
Date: 2014-11-04
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration is amending the airworthiness standards applicable to certain transport category airplanes certified for flight in icing conditions and the icing airworthiness standards applicable to certain aircraft engines. The regulations will improve safety by addressing supercooled large drop icing conditions for transport category airplanes most affected by these icing conditions; mixed phase and ice crystal conditions for all transport category airplanes; and supercooled large drop, mixed phase, and ice crystal icing conditions for all turbojet, turbofan, and turboprop engines.
Petition for Exemption; Summary of Petition Received
Document Number: 2014-26054
Type: Notice
Date: 2014-11-03
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received
Document Number: 2014-26053
Type: Notice
Date: 2014-11-03
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Departing IFR/VFR When Weather Reporting Is Not Available; Confirmation of Effective Date
Document Number: 2014-26052
Type: Rule
Date: 2014-11-03
Agency: Federal Aviation Administration, Department of Transportation
This action confirms the effective date of the direct final rule published on July 28, 2014, and responds to the comments received on that direct final rule. The rule permits the pilot in command of a helicopter air ambulance to assess the weather at a departure point where current weather observations are not available and allows the pilot to depart if the observed ceiling and visibility is greater than certain weather minimums. This action will allow a pilot to utilize the minimum takeoff visibilities depicted in a published obstacle departure procedure, or in the absence of such a procedure, when the pilot observed ceiling and visibility is greater than the minimum ceiling and visibility limitations required by specific helicopter air ambulance rules. This change to the current regulation will permit helicopter air ambulance flights to enter the National Airspace System (NAS) under Instrument Flight Rules (IFR) when visibilities and ceilings are below Visual Flight Rules (VFR), thus increasing the safety of the flight.
Airport Property Release Notice; Southbridge Municipal Airport, Southbridge, MA
Document Number: 2014-25885
Type: Notice
Date: 2014-10-31
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration is considering a proposal to release approximately 30.29 acres of airport property for conservation land at the Southbridge Municipal Airport, Southbridge, MA. The acres to be released are currently not used for aeronautical purposes and are vacant wetlands. The released acres would be considered reimbursement for general funds the Town of Southbridge expended to provide the Airport with necessary services within the last 6 years. In accordance with section 47107(h) of Title 49 of the United States Code, the FAA invites public comment on this proposal.
Special Conditions: SNECMA, Silvercrest-2 SC-2D; Rated 10-Minute One Engine Inoperative Takeoff Thrust at High Ambient Temperature
Document Number: 2014-25884
Type: Rule
Date: 2014-10-31
Agency: Federal Aviation Administration, Department of Transportation
These final special conditions are issued for the SNECMA, Silvercrest-2 SC-2D engine model. This engine will have a novel or unusual design featurean additional takeoff rating that increases the exhaust gas temperature (EGT) limit to maintain takeoff thrust in certain high ambient temperature conditions with one engine inoperative (OEI) for a maximum of 10 minutes. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These final special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Notice of Industry Meeting
Document Number: 2014-25827
Type: Notice
Date: 2014-10-30
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration (FAA) is hosting a public meeting for the Aircraft Access to System Wide Information Management (AAtS) Phase 2 Working Group. The Working Group Meeting will be a forum for discussions regarding the operational needs for a capability such as AAtS. This meeting is not a precursor to a request for proposal (RFP) or request for offer (RFO). The FAA is not seeking or accepting unsolicited proposals.
Airworthiness Directives; Rolls-Royce plc Turbofan Engines
Document Number: 2014-25739
Type: Rule
Date: 2014-10-30
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all Rolls-Royce plc (RR) Trent 1000-A, 1000-C, 1000-D, 1000-E, 1000-G, and 1000-H turbofan engines. This AD requires removing engine electronic controller (EEC) software earlier than standard MB6.15 and replacing with a software standard eligible for installation. This AD was prompted by a finding that an intermediate pressure (IP) shaft failure may not be detected by EEC software earlier than standard MB6.15. We are issuing this AD to detect IP shaft failure and prevent IP compressor turbine burst, uncontained engine failure, and damage to the airplane.
Airworthiness Directives; Costruzioni Aeronautiche Tecnam srl Airplanes
Document Number: 2014-25740
Type: Proposed Rule
Date: 2014-10-29
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for Costruzioni Aeronautiche Tecnam srl Model P2006T airplanes. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as cracking found in the engine exhaust pipe. We are issuing this proposed AD to require actions to address the unsafe condition on these products.
Twenty Second Meeting: RTCA Special Committee 217-Aeronautical Databases Joint With EUROCAE WG-44-Aeronautical Databases
Document Number: 2014-25665
Type: Notice
Date: 2014-10-29
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 217Aeronautical Databases being held jointly with EUROCAE WG-44Aeronautical Databases.
Seventh Meeting: RTCA Special Committee 228-Minimum Operational Performance Standards for Unmanned Aircraft Systems
Document Number: 2014-25664
Type: Notice
Date: 2014-10-29
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of the seventh meeting of RTCA Special Committee 228Minimum Operational Performance Standards for Unmanned Aircraft Systems.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2014-25419
Type: Rule
Date: 2014-10-29
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2005-14-07 for certain The Boeing Company Model 727, 727C, 727-100, 727-100C, 727-200, and 727-200F series airplanes. AD 2005-14-07 required repetitive inspections of the carriage attach fittings on the inboard and outboard foreflaps of each wing for cracking and other discrepancies, and corrective actions if necessary. This new AD requires reducing certain repetitive inspection intervals for the inboard and outboard carriage attach fittings for the outboard foreflaps, requires previously optional terminating actions which install improved outboard foreflap carriage attach fittings, and adds new initial and repetitive inspections of those fittings and corrective actions if necessary. This AD was prompted by a report of broken inboard and outboard carriage attach fittings of the outboard foreflaps found during an inspection. We are issuing this AD to detect and correct fatigue cracking of the attach fittings of the foreflap carriage of the wings, which could result in partial or complete loss of the foreflap and consequent loss of controllability of the airplane.
Airworthiness Directives; Honeywell International Inc. Air Data Pressure Transducers
Document Number: 2014-24558
Type: Rule
Date: 2014-10-29
Agency: Federal Aviation Administration, Department of Transportation
We are removing Airworthiness Directive (AD) 2012-26-15, which applied to certain Honeywell International Inc. air data pressure transducers as installed on various aircraft. AD 2012-26-15 required doing various tests or checks of equipment having certain air data pressure transducers, removing equipment if necessary, and reporting the results of the tests or checks. As an option to the tests or checks, AD 2012-26-15 allowed removal of affected equipment having certain air data pressure transducers. We issued AD 2012-26-15 to detect and correct inaccuracies of the pressure sensors, which could result in altitude, computed airspeed, true airspeed, and Mach computation errors. AD 2012-26-15 reported that these errors could reduce the ability of the flightcrew to maintain the safe flight of the aircraft and could result in consequent loss of control of the aircraft. Since we issued AD 2012-26-15, we have received new data indicating that the safety risk is lower than originally estimated.
Petition for Exemption; Summary of Petition Received
Document Number: 2014-25621
Type: Notice
Date: 2014-10-28
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received
Document Number: 2014-25620
Type: Notice
Date: 2014-10-28
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received
Document Number: 2014-25619
Type: Notice
Date: 2014-10-28
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received
Document Number: 2014-25616
Type: Notice
Date: 2014-10-28
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received
Document Number: 2014-25612
Type: Notice
Date: 2014-10-28
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received
Document Number: 2014-25608
Type: Notice
Date: 2014-10-28
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received
Document Number: 2014-25598
Type: Notice
Date: 2014-10-28
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Proposed Establishment of Class E Airspace; Encinal, TX
Document Number: 2014-25528
Type: Proposed Rule
Date: 2014-10-28
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to establish Class E airspace at Encinal, TX. Controlled airspace is necessary to accommodate new Standard Instrument Approach Procedures (SIAPs) at El Jardin Ranch Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) operations for SIAPs at the airport.
Proposed Establishment of Class E Airspace; Cando, ND
Document Number: 2014-25521
Type: Proposed Rule
Date: 2014-10-28
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to establish Class E airspace at Cando, ND. Controlled airspace is necessary to accommodate new Standard Instrument Approach Procedures (SIAPs) at Cando Municipal Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) operations for SIAPs at the airport.
Proposed Establishment of Class E Airspace; Alma, NE
Document Number: 2014-25516
Type: Proposed Rule
Date: 2014-10-28
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to establish Class E airspace at Alma, NE. Controlled airspace is necessary to accommodate new Standard Instrument Approach Procedures (SIAPs) at Alma Municipal Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) operations for SIAPs at the airport.
Airworthiness Directives; Airbus Airplanes
Document Number: 2014-25413
Type: Rule
Date: 2014-10-28
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Airbus Model A330-200 and -300 series airplanes, and Model A340-200 and -300 series airplanes. This AD was prompted by a report of contact between certain electrical harnesses and the hatrack rod that could cause chafing between the harnesses and surrounding structure. This AD requires modifying the routing of certain electrical harnesses. We are issuing this AD to prevent chafing and possible short circuit of two oxygen chemical generator containers in different wiring routes, which could result in malfunction of the electrical opening of all the containers connected to these routes. Such conditions, during a sudden depressurization event, could result in lack of oxygen and consequent injuries to airplane occupants.
Airworthiness Directives; Bombardier, Inc. Airplanes
Document Number: 2014-25101
Type: Rule
Date: 2014-10-28
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model BD-700-1A11 airplanes. This AD was prompted by a report that certain lanyards for the passenger oxygen masks are longer than the specified length, possibly leading to inactive oxygen masks in an emergency. This AD requires replacement of certain oxygen mask lanyards. We are issuing this AD to detect and correct lanyards of incorrect length, which might not activate the flow of oxygen in an emergency, resulting in injury to passengers.
Airworthiness Directives; Bombardier, Inc. Airplanes
Document Number: 2014-25022
Type: Rule
Date: 2014-10-28
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2C10 (Regional Jet Series 700, 701, & 702) airplanes, Model CL-600-2D24 (Regional Jet Series 900) airplanes, and Model CL-600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by a report that certain parts of the aft baggage door did not conform to the design specifications and were of degraded strength. This AD requires repetitive inspections for cracking and deformations of certain stop fittings and striker plates of the aft baggage bay door; and replacement, which would terminate the repetitive inspections. We are issuing this AD to prevent cracking and deformations of certain stop fittings and striker plates, which could result in the opening of the aft baggage bay door and rapid decompression or reduced controllability of the airplane.
Airworthiness Directives; the Boeing Company Airplanes
Document Number: 2014-25019
Type: Rule
Date: 2014-10-28
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all The Boeing Company Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83), DC-9-87 (MD-87), and MD-88 airplanes. This AD was prompted by reports of cracks emanating from the aft-most barrel nut holes of the left and right upper rear spar caps of the horizontal stabilizer. This AD requires repetitive high frequency eddy current (ETHF) inspections for cracks in the areas around the two aft-most barrel nut holes of the upper rear spar caps, and corrective actions if necessary; and repetitive ETHF inspections for cracks in the areas around the two aft- most barrel nut holes of any repaired or replaced upper rear spar cap, and corrective actions if necessary. We are issuing this AD to detect and correct cracks in the horizontal stabilizer, which could propagate until an upper rear spar cap severs, and result in failure of the horizontal stabilizer upper center or aft skin panel and adversely affect the structural integrity of the airplane.
Airworthiness Directives; Bombardier, Inc. Airplanes
Document Number: 2014-25018
Type: Rule
Date: 2014-10-28
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2B16 airplanes. This emergency AD was sent previously to all known U.S. owners and operators of these airplanes. This AD requires inspecting the inboard flap fasteners of the hinge-box forward fitting at Wing Station (WS) 76.50 and WS 127.25 to determine the orientation and condition of the fasteners, as applicable, and replacement or repetitive inspections of the fasteners if necessary. This AD also provides for optional terminating action for the requirements of the AD. This AD was prompted by reports of fractured fastener heads on the inboard flap hinge-box forward fitting at WS 76.50 due to incorrect installation. We are issuing this AD to detect and correct incorrectly oriented or fractured fasteners, which could result in premature failure of the fasteners attaching the inboard flap hinge-box forward fitting. Failure of the fasteners could lead to the detachment of the flap hinge box and the flap surface, and consequent loss of control of the airplane.
Airworthiness Directives; the Boeing Company Airplanes
Document Number: 2014-25013
Type: Rule
Date: 2014-10-28
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model DC-10-10, DC-10-10F, DC-10-30, DC-10-30F (KC- 10A and KDC-10), DC-10-40, MD-10-10F, and MD-10-30F airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that the forward cargo compartment frames are subject to widespread fatigue damage (WFD). This AD requires an inspection of the attachment holes at the forward cargo compartment frames and the cargo liner for cracking, and repair if necessary. This AD would also require installing new oversized fasteners in the forward cargo compartment frames. We are issuing this AD to prevent fatigue cracking of the forward cargo compartment frames, which could result in loss of the fail-safe structural integrity of the airplane.
IFR Altitudes; Miscellaneous Amendments
Document Number: 2014-25330
Type: Rule
Date: 2014-10-24
Agency: Federal Aviation Administration, Department of Transportation
This amendment adopts miscellaneous amendments to the required IFR (instrument flight rules) altitudes and changeover points for certain Federal airways, jet routes, or direct routes for which a minimum or maximum en route authorized IFR altitude is prescribed. This regulatory action is needed because of changes occurring in the National Airspace System. These changes are designed to provide for the safe and efficient use of the navigable airspace under instrument conditions in the affected areas.
Airworthiness Directives; Fiberglas-Technik Rudolf Lindner GmbH & Co. KG Gliders
Document Number: 2014-25287
Type: Rule
Date: 2014-10-24
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for Fiberglas-Technik Rudolf Lindner GmbH & Co. KG (type certificates formerly held by GROB-WERKE GMBH & CO KG and BURKHART GROB LUFT- UND RAUMFAHRT GmbH & CO KG) Models G102 STANDARD ASTIR III, G102 CLUB ASTIR III, G102 CLUB ASTIR IIIb, G103 TWIN II, G103A TWIN II ACRO, G103C TWIN III ACRO, and G 103 C Twin III SL gliders. This AD revises AD 2014-15- 02, which required inspection of the rudder control unit for installation of plastic cable pulleys and replacement of plastic cable pulleys with aluminum cable pulleys. This AD retains the actions of AD 2014-15-02 but clarifies the suffixes of serial numbers (S/Ns) in paragraph (c) Applicability. This AD was prompted by reports of plastic control cable pulleys developing cracks due to aging, which could lead to breaking of the pulley and potentially jamming the rudder control unit, possibly resulting in loss of control. We are issuing this AD to require actions to address the unsafe condition on these products.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2014-25021
Type: Rule
Date: 2014-10-24
Agency: Federal Aviation Administration, Department of Transportation
This rule amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2014-25020
Type: Rule
Date: 2014-10-24
Agency: Federal Aviation Administration, Department of Transportation
This rule establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2014-25016
Type: Rule
Date: 2014-10-24
Agency: Federal Aviation Administration, Department of Transportation
This rule amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.