Federal Aviation Administration March 6, 2013 – Federal Register Recent Federal Regulation Documents
Results 1 - 9 of 9
Airworthiness Directives; Slingsby Sailplanes Ltd. Sailplanes
We propose to adopt a new airworthiness directive (AD) for all Slingsby Sailplanes Ltd. Models Dart T.51, Dart T.51/17, and Dart T.51/ 17R sailplanes equipped with aluminum alloy spar booms that would supersede an existing AD. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as an incident of glue joint failure on a starboard wing caused by water entering the area of the airbrake box that resulted in delamination and corrosion in the area of the aluminum alloy spar booms and the wing attach fittings. We are issuing this proposed AD to require actions to address the unsafe condition on these products.
Proposed Establishment of Class E Airspace; Captiva, FL
This action proposes to establish Class E Airspace at Captiva, FL, to accommodate a new Area Navigation (RNAV) Global Positioning System (GPS) special Standard Instrument Approach Procedure (SIAP) serving Upper Captiva Island Heliport. This action would enhance the safety and airspace management of Instrument Flight Rules (IFR) operations within the National Airspace System.
Proposed Establishment of Class E Airspace; Boca Grande, FL
This action proposes to establish Class E Airspace at Boca Grande, FL, to accommodate a new Area Navigation (RNAV) Global Positioning System (GPS) special Standard Instrument Approach Procedure (SIAP) serving Boca Grande Heliport. This action would enhance the safety and airspace management of Instrument Flight Rules (IFR) operations within the National Airspace System.
Proposed Establishment of Class E Airspace; Cleveland, TN
This action proposes to establish Class E Airspace at Cleveland, TN, to accommodate the Area Navigation (RNAV) Global Positioning System (GPS) Standard Instrument Approach Procedures at Cleveland Regional Jetport. This action would enhance the safety and airspace management of Instrument Flight Rules (IFR) operations at the airport.
Proposed Establishment of Class E Airspace; Pine Island, FL
This action proposes to establish Class E Airspace at Pine Island, FL, to accommodate a new Area Navigation (RNAV) Global Positioning System (GPS) special Standard Instrument Approach Procedure (SIAP) serving Pine Island Heliport. This action would enhance the safety and airspace management of Instrument Flight Rules (IFR) operations within the National Airspace System.
Proposed Establishment of Class E Airspace; Linton, ND
This action proposes to establish Class E airspace at Linton, ND. Controlled airspace is necessary to accommodate new Standard Instrument Approach Procedures (SIAP) at Linton Municipal Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) operations for SIAPs at the airport.
Proposed Establishment of Class E Airspace; Sanibel, FL
This action proposes to establish Class E Airspace at Sanibel, FL, to accommodate a new Area Navigation (RNAV) Global Positioning System (GPS) special Standard Instrument Approach Procedure (SIAP) serving Sanibel Island Heliport. This action would enhance the safety and airspace management of Instrument Flight Rules (IFR) operations within the National Airspace System.
Airworthiness Directives; The Boeing Company Airplanes
We propose to supersede an existing airworthiness directive (AD) that applies to certain The Boeing Company Model 747-100, 747- 100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, and 747SR series airplanes. The existing AD currently requires repetitive inspections to find cracking of the web, strap, inner chords, inner chord angle of the forward edge frame of the number 5 main entry door cutouts, the frame segment between stringers 16 and 31, and repair if necessary; and repetitive inspections for cracking of repairs. Since we issued that AD, we have received multiple reports of cracking outside of the previous fuselage inspection areas and a report of a crack that initiated at the aft edge of the inner chord rather than initiating at a fastener location, which was the previous cracking location. This proposed AD would expand the previous fuselage areas that are inspected for cracking. We are proposing this AD to detect and correct such cracks, which could cause damage to the adjacent body structure and could result in depressurization of the airplane in flight.
Airworthiness Directives; Turbomeca S.A. Turboshaft Engines
We are superseding an existing airworthiness directive (AD) for all Turbomeca S.A. Makila 1A2 turboshaft engines. That AD currently requires replacement of certain serial number (S/N) N2 sensor harnesses. This AD requires replacement of the same S/N harnesses, and requires replacement of additional S/N N2 sensor harnesses. This AD was prompted by corrosion detected in affected N2 sensor harnesses. We are issuing this AD to prevent inadvertent activation of the 65% N1 back up mode, resulting in N2 speed fluctuation, significant power loss, and emergency landing of the helicopter.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
