Federal Aviation Administration February 26, 2013 – Federal Register Recent Federal Regulation Documents
Results 1 - 3 of 3
Airworthiness Directives; Airbus Airplanes
We propose to adopt a new airworthiness directive (AD) for all Airbus Model A318, A319, A320, and A321 series airplanes. This proposed AD was prompted by reports that certain trimmable horizontal stabilizer actuators (THSA) were found with corrosion that affected the ballscrew lower splines between the tie-bar and screw-jack. This proposed AD would require repetitive inspections of the THSA; ballscrew integrity tests, if necessary; and replacement of affected THSAs. We are proposing this AD to detect and correct corrosion in the ballscrew lower splines, which, if the ballscrew ruptured, could lead to transmission of THSA torque loads from the ballscrew to the tie-bar, prompting THSA blowback, and possible loss of control of the airplane.
Airworthiness Directives; The Boeing Company Airplanes
We propose to supersede two existing airworthiness directives (AD) that apply to all The Boeing Company Model 767 airplanes. One AD currently requires a functional check of the shear rivets in all six elevator power control actuator (PCA) bellcrank assemblies to determine the condition of the shear rivets, and replacement or rework of the bellcrank assemblies if necessary. The other AD currently requires repetitive testing of the elevator control system to determine if an elevator PCA is rigged incorrectly, and follow-on actions if necessary. Since we issued those ADs, a terminating modification has been designed. This proposed AD would require an inspection to determine the part numbers and condition of the bellcrank assemblies; modification or replacement of the PCA bellcrank assembly, if necessary; and a repetitive functional test and mis-rig check, and corrective actions if necessary. We are proposing this AD to prevent continued operation with yielded or failed shear rivets in the elevator PCA bellcrank assemblies, and to prevent certain failures or jams in the elevator system from causing a hardover of the elevator surface, resulting in a significant pitch upset and possible loss of control of the airplane.
Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel Aircraft Industries, Ltd.) Airplanes
We propose to supersede an existing airworthiness directive (AD) that applies to all Gulfstream Aerospace LP (Type Certificate Previously Held by Israel Aircraft Industries, Ltd.) Model Gulfstream 100 airplanes, and Model Astra SPX and 1125 Westwind Astra airplanes. The existing AD currently requires amending the airplane flight manuals (AFMs) to include additional procedures for verifying complete closure and locking of the main entry door (MED). The existing AD also currently requires modifying the warning and caution lights panel (WACLP), changing the WACLP and MED wiring, changing the wiring harness connecting the MED to the WACLP, and revising the log of modification of the AFM if necessary. Since we issued that AD, we have determined that the compliance time must be revised to ensure the unsafe condition is addressed on low utilization airplanes. We have also removed one airplane from the applicability. We are proposing this AD to prevent incomplete closure of the MED, which may result in the door opening in flight and possible separation of the door, causing damage to the airplane structure and left engine by flying debris and objects.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
