Federal Aviation Administration 2009 – Federal Register Recent Federal Regulation Documents
Results 401 - 450 of 1,434
Notice of Intent To Rule on Application 09-22-C-00-ORD To Impose and Use the Revenue From a Passenger Facility Charge (PFC) at Chicago O'Hare International Airport, Chicago, IL
The FAA proposes to rule and invites public comment on the application to impose and use the revenue from a PFC Chicago O'Hare International Airport under the provisions of the 49 U.S.C. 40117 and Part 158 of the Federal Aviation Regulations (14 CFR Part 158).
Notice of Approval of Noise Compatibility Program
The Federal Aviation Administration (FAA) announces its findings on the noise compatibility program (NCP) submitted by the Metropolitan Airport Authority of Peoria for General Wayne A. Downing Peoria International Airport under the provisions of 49 U.S.C. 47501 et seq. (the Aviation Safety and Noise Abatement Act, herein referred to as ``the Act'') and 14 CFR part 150. These findings are made in recognition of the description of Federal and nonfederal responsibilities in Senate Report No. 96-52 (1980). The General Wayne A. Downing Peoria International Airport noise exposure maps were determined by FAA to be in compliance with applicable requirements on June 26, 2009. Notice of this determination was published in the Federal Register on July 2, 2009, 74 FR 31791.
Fourth Meeting-Special Committee 222: Inmarsat Aeronautical Mobile Satellite (Route) Services
The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 222: Inmarsat Aeronautical Mobile Satellite (Route) Services.
Notice of Submission Deadline for Schedule Information for O'Hare International Airport, John F. Kennedy International Airport, and Newark Liberty International Airport for the Summer 2010 Scheduling Season
Under this notice, the FAA announces the submission deadline of October 15, 2009, for Summer 2010 flight schedules at Chicago's O'Hare International Airport (ORD), New York's John F. Kennedy International Airport (JFK), and Newark Liberty International Airport (EWR) in accordance with the International Air Transport Association (IATA) Worldwide Scheduling Guidelines. The deadline of October 15, 2009, coincides with the schedule submission deadline for the IATA Schedules Conference for the Summer 2010 scheduling season.
Proposed Revision of Colored Federal Airways; Alaska
This action proposes to revise two Colored Federal Airways, Green 16 (G-16) and Blue 26 (B-26), in Alaska. The FAA is proposing this action in preparation of the eventual decommissioning of the Barter Island (BTI) Non-directional Beacon (NDB) at the Village of Kaktovik, Alaska.
Establishment of Restricted Area R-2502A; Fort Irwin, CA
This action establishes a restricted area (R-2502A) at Fort Irwin, CA, as part of a Department of the Army initiative at the National Training Center (NTC). The NTC is being expanded to meet the critical need of the Army for additional training land and airspace suitable for maneuvering large numbers of military personnel and equipment. Additionally, the Silver military operation area (MOA) in the vicinity of the NTC Complex has been modified as part of this initiative. Unlike restricted areas, which are designated under Title 14 Code of Federal Regulations (14 CFR) part 73, MOAs are not rulemaking airspace actions. However, since the R-2502A will infringe on the Silver MOA, the FAA is including a description of the Silver MOA change in this rule. The MOA change described here was published in the National Flight Data Digest (NFDD). The Army requested these airspace changes to provide the additional special use airspace (SUA) above the expanded ground maneuver area to facilitate realistic combat training at the NTC.
Special Conditions: Boeing Model 747-8/-8F Airplanes, Systems and Data Networks Security-Protection of Airplane Systems and Data Networks From Unauthorized External Access
This action proposes special conditions for the Boeing Model 747-8/-8F airplane. This airplane will have novel or unusual design features associated with the architecture and connectivity capabilities of the airplane's computer systems and networks, which may allow access to external computer systems and networks. Connectivity to external systems and networks may result in security vulnerabilities to the airplane's systems. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
IFR Altitudes; Miscellaneous Amendments
This amendment adopts miscellaneous amendments to the required IFR (instrument flight rules) altitudes and changeover points for certain Federal airways, jet routes, or direct routes for which a minimum or maximum en route authorized IFR altitude is prescribed. This regulatory action is needed because of changes occurring in the National Airspace System. These changes are designed to provide for the safe and efficient use of the navigable airspace under instrument conditions in the affected areas.
Proposed Amendment to Class E Airspace; Riverton, WY
This action proposes to amend Class E airspace at Riverton Regional Airport, Riverton, WY. Additional controlled airspace is necessary to accommodate aircraft using the VHF Omni-Directional Radio Range (VOR), Area Navigation (RNAV) Global Positioning System (GPS) Standard Instrument Approach Procedure (SIAP) at Riverton Regional Airport, Riverton, WY. This will improve the safety of Instrument Flight Rules (IFR) aircraft executing the VOR (RNAV) GPS (SIAP) at Riverton Regional Airport, Riverton, WY.
Airworthiness Directives; Boeing Model 747-100, -100B, -100B SUD, -200B, -200C, -200F, -300, -400, -400D, -400F, and 747SR Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Boeing Model 747 airplanes identified above. This AD requires replacing the inboard trailing edge (TE) flap transmission carbon disk no-back brakes with skewed roller no-back brakes at the TE flap transmission, positions 4 and 5. This AD results from reports of the inboard TE flaps blowing back due to the failure of a transmission carbon disk no-back brake. The no-back brake did not hold the TE flaps in the commanded position. We are issuing this AD to prevent a decrease of the aerodynamic controllability of the airplane, which could adversely affect the airplane's continued safe flight and landing.
Airworthiness Directives; Glaser-Dirks Flugzeugbau GmbH Model DG-100 Gliders
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Boeing Model 737-300, -400, and -500 Series Airplanes Equipped With a Digital Transient Suppression Device (DTSD) Installed in Accordance With Supplemental Type Certificate (STC) ST00127BO
We are adopting a new airworthiness directive (AD) for certain Boeing Model 737-300, -400, and -500 series airplanes. This AD requires revising the maintenance program to include new fuel system limitations for airplanes modified in accordance with STC ST00127BO. This AD also requires inspections and checks of the DTSDs and corrective actions, if necessary. This AD results from fuel system reviews conducted by the manufacturer. We are issuing this AD to prevent a potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in a fuel tank fire or explosion and consequent loss of the airplane.
Airworthiness Directives; Boeing Model 727 Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 727 airplanes. This AD requires performing an operational test of the engine fuel suction feed of the fuel system, and other related testing and corrective actions if necessary. This AD results from a report of in-service occurrences of loss of fuel system suction feed capability, followed by total loss of pressure of the fuel feed system. We are issuing this AD to detect and correct failure of the engine fuel suction feed capability of the fuel system, which could result in multi-engine flameout, inability to restart the engines, and consequent forced landing of the airplane.
Airworthiness Directives; Boeing Model 767-200, -300, and -300F Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Boeing Model 767-200, -300, and -300F series airplanes. This AD requires repetitive inspections for fatigue cracking and corrosion of the upper link fuse pin of the nacelle struts, and related investigative and corrective actions if necessary. This AD also provides terminating action for the repetitive inspections. This AD results from two reports of cracked upper link fuse pins. We are issuing this AD to prevent fatigue cracking or corrosion of the upper link fuse pin, which could result in failure of the fuse pin and consequent reduced structural integrity of the nacelle strut and possible separation of the strut and engine from the airplane during flight.
Approval of Noise Compatibility Program, Destin-Ft. Walton Beach Airport, Destin, FL
The Federal Aviation Administration (FAA) announces its findings on the Noise Compatibility Program submitted by the Oklaloosa County under the provisions of 49 U.S.C. (the Aviation Safety and Noise Abatement Act, hereinafter referred to as ``the Act'') and 14 CFR Part 150. These findings are made in recognition of the description of Federal and nonfederal responsibilities in Senate Report No. 96-52 (1980). On January 14, 2009, the FAA determined that the noise exposure maps submitted by Okaloosa County under Part 150 were in compliance with applicable requirements. On July 7, 209, the FAA approved the Destin-Ft. Walton Beach Airport noise compatibility program. All of the recommendations of the program were approved. No program elements relating to new or revised flight procedures for noise abatement were proposed by the airport operators.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
First Meeting, RTCA Special Committee 223: Airport Surface Wireless Communications
The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 223: Airport Surface Wireless Communications.
Sixth Meeting, Special Committee 213/EUROCAE WG 79: Enhanced Flight Vision Systems/Synthetic Vision Systems (EFVS/SVS)
The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 213/EUROCAE WG 79: Enhanced Flight Vision Systems/Synthetic Vision Systems (EFVS/SVS).
Fifth Meeting-RTCA Special Committee 217/EUROCAE WG 44 Plenary: Airport Mapping Databases
The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 217/EUROCAE WG 44.
Establishment of Class E Airspace; Ronan, MT
This action establishes Class E airspace at Ronan, MT. It also makes a minor revision to the legal description of that airspace.
Airworthiness Directives; Boeing Model 757 Airplanes
We propose to adopt a new airworthiness directive (AD) for certain Boeing Model 757 airplanes. This proposed AD would require inspecting to verify the part number of the low-pressure flex-hoses of the flightcrew and supernumerary oxygen system installed under the oxygen mask stowage box at a flightcrew and supernumerary oxygen mask location, and replacing with a new non-conductive low-pressure flex- hose of the oxygen system if necessary. This proposed AD results from reports of a low-pressure flex-hose of a flightcrew oxygen system that burned through due to inadvertent electrical current from a short circuit in an adjacent audio select panel. We are proposing this AD to prevent inadvertent electrical current which can cause the low-pressure flex-hose of a flightcrew or supernumerary oxygen system to melt or burn, resulting in oxygen system leakage and smoke or fire.
Airworthiness Directives; DORNIER LUFTAHRT GmbH Models Dornier 228-100, Dornier 228-101, Dornier 228-200, Dornier 228-201, and Dornier 228-202 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Airbus Model A310-203 and -222 Airplanes and Model A300 B4-620 Airplanes
We are superseding an existing airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Airbus Model A318, A319, A320, and A321 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Glaser-Dirks Flugzeugbau GmbH Model DG-100 Gliders
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Boeing Model 727 Airplanes
We are adopting a new airworthiness directive (AD) for all Boeing Model 727 airplanes. This AD requires inspections for cracking of the left- and right-side shear ties and web posts of the kickload beam and the adjacent structure in the vertical stabilizer, and corrective actions if necessary. This AD results from a report of cracking of the left- and right-side web posts and shear ties of the kickload beam. We are issuing this AD to detect and correct cracking of the left- and right-side web posts and shear ties of the kickload beam, which, when coupled with failures in the adjacent structure, could result in structural failure of the vertical stabilizer, and loss of control of the airplane.
Airworthiness Directives; Boeing Model 767-200 and -300 Series Airplanes
This amendment adopts a new airworthiness directive (AD), applicable to certain Boeing Model 767-200 and -300 series airplanes, that requires replacing certain door-mounted escape slides and slide- raft assemblies with new slide-raft assemblies. This AD also requires the following actions, as applicable: replacing certain escape system latches with new latches; modifying or replacing certain counterbalance assemblies with new counterbalance assemblies; and adjusting the door counterbalance system. The actions specified by this AD are intended to prevent the escape slides and slide-rafts of the forward and mid-cabin entry and service doors from being too steep for evacuation in the event that the airplane rotates onto the aft fuselage into the extreme tip-back condition. In the extreme tip-back condition, the forward and mid-cabin exits could result in steeper sliding angles, which could cause injury to passengers and crewmembers during an emergency
Fifty-Fourth Meeting, RTCA Special Committee 135: Environmental Conditions and Test Procedures for Airborne Equipment
The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 135: Environmental Conditions and Test Procedures for Airborne Equipment.
Airworthiness Directives; Fokker Model F.28 Mark 0070 and 0100 Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Bombardier Model CL-600-2C10 (Regional Jet Series 700, 701, & 702), Model CL-600-2D15 (Regional Jet Series 705), and Model CL-600-2D24 (Regional Jet Series 900) Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Boeing Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, and 747SP Series Airplanes
We propose to adopt a new airworthiness directive (AD) for all Boeing Model 747 airplanes. This proposed AD would require a general visual inspection to identify any existing repairs of the upper main sill outer chord of the left and right side main entry door number 1, as applicable; repetitive detailed inspections for cracks in the upper main sill of the door(s); and related investigative and corrective actions, if necessary. This proposed AD would also require repetitive inspections for airplanes on which a certain repair is done, and corrective actions if necessary. This proposed AD results from reports of cracks in the main entry door number 1 upper main sill outer chord, along the bend radius of the chord on several airplanes. We are proposing this AD to detect and correct such cracks, which could result in loss of structural integrity of the airplane.
Airworthiness Directives; SOCATA Model TBM 700 Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
RTCA Government/Industry Air Traffic Management Advisory Committee
The FAA is issuing this notice to advise the public of a meeting of RTCA Government/Industry Air Traffic Management Advisory Committee.
Notice of Intent to Rule on Request To Release Airport Property at the Boise Air Terminal, Boise, ID
The FAA proposes to rule and invite public comment on the release of land at Boise Air Terminal under the provisions of section.
Airworthiness Directives; Dowty Propellers R408/6-123-F/17 Model Propellers
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: Friction or contact between a propeller de-ice bus bar and the backplate assembly can cause failure of the bus bar and a consequent intermittent short circuit. Such a short circuit can cause a dual AC generator shutdown that, particularly in conjunction with an engine failure in icing conditions, could result in reduced controllability of the airplane.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135BJ, -135ER, -135KE, -135KL, -135LR, -145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP Airplanes
We are revising an earlier supplemental NPRM for the products listed above. This action revises the earlier supplemental NPRM by expanding the scope. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: It has been found the occurrence of engine anti-ice system valve failure, where the valve spring seat has broken and obstructed the anti-ice system venturi tube. Therefore, should the aircraft encounter icing conditions, ice may accrete in the engine inlet lip and be ingested through the air inlet, resulting in possible engine damage and flame-
Airworthiness Directives; Boeing Model 747-100, 747-200B, 747-300, and 747SR Series Airplanes
We are revising an earlier proposed airworthiness directive (AD) for certain Boeing Model 747-100, 747-200B, 747-300, and 747SR series airplanes. The original NPRM proposed to require installation of a closeout panel and moisture curtains for the main equipment center. The original NPRM also proposed to require changing the drain tubes for the power drive units (PDU) and the pitot static tubes and installing larger moisture shrouds. The original NPRM resulted from a report of water contamination in the electrical and electronic units in the main equipment center. This action revises the original NPRM by adding airplanes to the applicability and removing certain others, and removing certain requirements. We are proposing this supplemental NPRM to prevent the malfunction of one or more electrical and electronic units in the main equipment center, which could adversely affect the airplane's continued safe flight.
Airworthiness Directives; Airbus Model A330 and A340 Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above that would supersede an existing AD. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: Uncontained APU [auxiliary power unit] generator failures on ground have occurred on Airbus A330 aircraft in service. APU generator design is common to all A330 and A340 aircraft. Preliminary investigations confirmed that these failures have resulted in structural damage to the APU compartment and, in one case, to the stabiliser compartment. Loose APU generator parts can lead to damage to the APU firewall, reducing its fire extinguishing capability and potentially leading to a temporary uncontrolled fire.
Establishment of Class D Airspace and Amendment of Class E Airspace; North Bend, OR
This action corrects a final rule published in the Federal Register on August 26, 2009. In that rule, errors were made in the legal description and the airport name for North Bend, OR. This action corrects those errors.
Modification of Class E Airspace; Franklin, NC
This action confirms the effective date of an airspace action, which was previously published as a direct final rule in the Federal Register, for the Macon County Airport in Franklin, NC.
Establishment of Class D Airspace, Modification of Class E Airspace; Bunnell, FL
This action confirms the effective date of an airspace action, which was previously published as a direct final rule in the Federal Register, for the Flagler County Airport in Bunnell, FL.
Modification of Class D and E Airspace, Removal of Class E Airspace; Aguadilla, PR
This action confirms the effective date of an airspace action, which was previously published as a direct final rule in the Federal Register, for the Rafael Hernandez Airport in Aguadilla, PR.
Approval of the Noise Compatibility Program for the Kansas City International Airport, Kansas City, MO
The Federal Aviation Administration (FAA) announces its findings on the Noise Compatibility Program (NCP) submitted by the Kansas City Aviation Department for the Kansas City International Airport under the provisions of 49 U.S.C. 47501 et seq. (formerly the Aviation Safety and Noise Abatement Act, hereinafter referred to as ``the Act'') and 14 Code of Federal Regulations (CFR) Part 150 (hereinafter referred to as ``Part 150''). On March 20, 2009, the FAA determined that the Noise Exposure Maps (NEM) submitted by the Kansas City Aviation Department under Part 150 were in compliance with applicable requirements. On September 14, 2009, the FAA approved the Kansas City International Airport noise compatibility program. All but two of the recommendations of the program were approved. No program elements relating to new or revised flight procedures for noise abatement were proposed by the airport operator.
Proposed Establishment and Modification of Class E Airspace; Bishop, CA
This action proposes to establish Class E surface airspace and modify existing Class E airspace at Eastern Sierra Regional Airport, Bishop, CA. Additional controlled airspace is necessary to accommodate aircraft using a new Area Navigation (RNAV) Global Positioning System (GPS) Standard Instrument Approach Procedure (SIAP) at Eastern Sierra Regional Airport, Bishop, CA. The FAA is proposing this action to enhance the safety and management of aircraft operations at Eastern Sierra Regional Airport, Bishop, CA.
Airworthiness Directives; Dassault Model Falcon 2000 and Falcon 2000EX Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Air Traffic Procedures Advisory Committee
The FAA published a meeting notice on September 10, 2009 (74 FR 46655) advising the public that a meeting of the Federal Aviation Air Traffic Procedures Advisory Committee would be held on October 6, 2009. This notice adds an additional meeting date of Wednesday, October 7, 2009 from 8 a.m. to 5 p.m.
Proposed Amendment of Class E Airspace; Red Oak, IA
This action proposes to amend Class E airspace at Red Oak, IA. Additional controlled airspace is necessary to accommodate new Standard Instrument Approach Procedures (SIAPs) at Red Oak Municipal Airport, Red Oak, IA. This action would also update the geographic coordinates of Red Oak Municipal Airport and the Red Oak NDB to coincide with the FAA's National Aeronautical Charting Office. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) operations for SIAPs at Red Oak Municipal Airport.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.