Federal Aviation Administration 2009 – Federal Register Recent Federal Regulation Documents
Results 201 - 250 of 1,434
Noise Compatibility Program (NCP); 14 CFR Part 150; Notice of Record of Approval (ROA); the Louisville International Airport, Louisville, KY (SDF)
The Federal Aviation Administration (FAA) announces its findings on the noise compatibility program update submitted by the Louisville Regional Airport Authority (LRAA).
Modification of the New York, NY, Class B Airspace Area; and Establishment of the New York Class B Airspace Hudson River and East River Exclusion Special Flight Rules Area
This action makes a minor modification to the New York, NY, Class B airspace area by adjusting the floor of Class B airspace above a portion of the Hudson River to 1,300 feet above mean sea level (MSL). Additionally, this action establishes a Special Flight Rules Area (SFRA) over the Hudson River and East River to mandate certain pilot operating practices for flight within the Hudson River and East River Class B airspace Exclusions. The FAA is taking this action to enhance the safety of flight operations in the New York Class B airspace Exclusion areas.
Noise Compatibility Program (NCP); 14 CFR Part 150; Notice of Record of Approval (ROA) the Louisville International Airport, Louisville, KY (SDF)
The Federal Aviation Administration (FAA) announces its findings on the noise compatibility program update submitted by the Louisville Regional Airport Authority (LRAA).
Proposed Establishment of Class E Airspace; Bryce Canyon, UT
This action proposes to establish Class E airspace at Bryce Canyon Airport, Bryce Canyon, UT. Controlled airspace is necessary to accommodate aircraft using a new Area Navigation (RNAV) Global Positioning System (GPS) Standard Instrument Approach Procedure (SIAP) at Bryce Canyon Airport, Bryce Canyon, UT. The FAA is proposing this action to enhance the safety and management of Instrument Flight Rules (IFR) aircraft operations at Bryce Canyon Airport.
19th Meeting: RTCA Special Committee 206/EUROCAE WG 76 Plenary: AIS and MET Data Link Services
The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 206/EUROCAE WG 76 Plenary: AIS and MET Data Link Services.
Proposed Establishment of Class E Airspace; Monterey, CA
This action proposes to establish Class E airspace at Monterey Peninsula Airport, Monterey, CA. Additional controlled airspace is necessary to accommodate aircraft using a new Area Navigation (RNAV) Required Navigation Performance (RNP) Standard Instrument Approach Procedure (SIAP) at Monterey Peninsula Airport. The FAA is proposing this action to enhance the safety and management of aircraft operations at Monterey Peninsula Airport, Monterey, CA.
Airworthiness Directives; Boeing Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-300, 747SR, and 747SP Series Airplanes
The FAA proposes to supersede an existing airworthiness directive (AD) that applies to certain Boeing Model 747 series airplanes. The existing AD currently requires repetitive inspections to detect cracking in certain fuselage skin lap joints, and repair if necessary. This proposed AD would expand the inspection area in the existing AD, add a modification of certain lap joints, and add certain post-repair inspections of the lap joints. Accomplishing the modification would end the repetitive inspections required by the existing AD for the length of lap joint that is modified. This proposed AD results from a structural review of affected skin lap joints for widespread fatigue damage. We are proposing this AD to prevent fatigue cracking in certain lap joints, which could result in rapid depressurization of the airplane.
Airworthiness Directives; Airbus Model A300 B2 and A300 B4 Series Airplanes; A300 B4-600, B4-600R, and F4-600R Series Airplanes; and Model C4-605R Variant F Airplanes (Collectively Called A300-600 Series Airplanes)
We propose to adopt a new airworthiness directive (AD) for the products listed above that would supersede an existing AD. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above that would supersede an existing AD. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Amendment of Class D and Class E Airspace; New Orleans NAS, LA
This action corrects the geographic coordinates of a final rule that was published in the Federal Register October 16, 2009, amending Class D and Class E airspace at New Orleans NAS, Alvin Callender Field, LA.
Amendment of Class E Airspace; Mankato, MN
This action amends Class E airspace at Mankato, MN. Additional controlled airspace is necessary to accommodate Area Navigation (RNAV) Standard Instrument Approach Procedures (SIAP) at Mankato Regional Airport, Mankato, MN. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR) operations at Mankato Regional Airport.
Airworthiness Directives; Mitsubishi Heavy Industries, Ltd. Various Model MU-2B Airplanes
We propose to supersede Airworthiness Directive (AD) 2006-17- 01, AD 2006-15-07, AD 2000-02-25, and AD 97-25-02, which apply to certain Mitsubishi Heavy Industries, Ltd. (MHI) various Model MU-2B airplanes. An FAA-led MU-2B safety evaluation resulted in the standardization of the MU-2B specific training and the FAA-accepted pilot operating checklists through a special federal aviation regulation (SFAR). MHI revised the airplane flight manuals (AFMs) to align them with the information in that training and the checklists. In addition, incorporating all AFM revisions up to and including this latest AFM revision will incorporate all AFM compliance actions required by the four above-mentioned ADs. This proposed AD would retain from AD 2006-17-01 the inspection of the engine torque indication system and possible recalibration of the torque pressure transducers and would require incorporating all revisions up to and including the latest revisions of the AFM. We are proposing this AD to correct inconsistencies in critical operating procedures between the MU-2B specific training, the FAA-accepted pilot operating checklists, and the AFMs. This condition, if not corrected, could result in operators using FAA-accepted pilot operating checklists that differ from the AFM in certain critical operating procedures, which could result in failure to properly operate the airplane. This failure could lead to loss of control.
Certification of Turbojets; Extension of Comment Period
This action extends the comment period for an NPRM that was published on August 17, 2009. In that document, the FAA proposed to amend applicable standards for part 23 turbojet-powered airplanes which are commonly referred to as ``turbojets''to reflect the current
Proposed Establishment of Low Altitude Area Navigation Route (T-284); Houston, TX
This action proposes to establish a low altitude area navigation (RNAV) route, designated T-284, in the Houston, TX, terminal area. T-routes are low altitude Air Traffic Service routes, based on RNAV, for use by aircraft that have instrument flight rules (IFR) approved Global Positioning System (GPS)/Global Navigation Satellite System (GNSS) equipment. This action would enhance safety and improve the efficient use of the navigable airspace in the Houston, TX terminal area.
Airworthiness Directives; SOCATA Model TBM 700 Airplanes
We are revising an existing airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Notice of Intent To Request Revision From the Office of Management and Budget of a Currently Approved Information Collection Activity, Request for Comments; Competition Plans, Passenger Facility Charges
The FAA invites public comments about our intention to request the Office of Management and Budget (OMB) to approve a current information collection. This information is needed to meet the requirements of Title 49, Section 40117(k), Competition Plans, and to carry out a passenger facility charge application.
Notice of Intent To Request Revision From the Office of Management and Budget of a Currently Approved Information Collection Activity, Request for Comments; Experimental Permits for Reusable Suborbital Rockets
The FAA invites public comments about our intention to request the Office of Management and Budget (OMB) to approve a current information collection. This rulemaking established requirements for the FAA's authority to issue Experimental Permits for reusable suborbital rockets to authorize launches for the purpose of research and development, crew training and showing compliance with the regulations.
Notice of Intent To Request Revision From the Office of Management and Budget of a Currently Approved Information Collection Activity, Request for Comments; Associate Administrator for Commercial Space Transportation (AST) Customer Service Survey
The FAA invites public comments about our intention to request the Office of Management and Budget (OMB) to approve a current information collection. The FAA Office of the Associate Administrator for Commercial Space Transportation (AST) conducts this survey in order to obtain industry input on customer service standards which have been developed and distributed to industry customers.
Proposed Establishment of Class E Airspace; Bonners Ferry, ID
This action proposes to establish Class E airspace at Boundary County Airport, Bonners Ferry, ID. Controlled airspace is necessary to accommodate aircraft using a new Area Navigation (RNAV) Global Positioning System (GPS) Standard Instrument Approach Procedure (SIAP) at Boundary County Airport, Bonners Ferry, ID. The FAA is proposing this action to enhance the safety and management of aircraft operations at Boundary County Airport, Bonners Ferry, ID.
Proposed Modification of Class E Airspace; Astoria, OR
This action proposes to modify Class E airspace at Astoria Regional Airport, Astoria, OR. Additional controlled airspace is necessary to accommodate aircraft using a new Area Navigation (RNAV) Global Positioning System (GPS) Standard Instrument Approach Procedure (SIAP) at Astoria Regional Airport, Astoria, OR. The FAA is proposing this action to enhance the safety and management of aircraft operations at Astoria Regional Airport, Astoria, OR. This will also correct the airport name from Port of Astoria Airport.
Proposed Establishment and Modification of Class E Airspace; Gunnison, CO
This action proposes to establish Class E surface airspace and modify existing Class E airspace at Gunnison-Crested Butte Regional Airport, Gunnison, CO. Additional controlled airspace is necessary to accommodate aircraft using a new Area Navigation (RNAV) Standard Instrument Approach Procedure (SIAP) at Gunnison-Crested Butte Regional Airport, Gunnison, CO. The FAA is proposing this action to enhance the safety and management of aircraft operations at Gunnison-Crested Butte Regional Airport, Gunnison, CO. This action also would update the airport name from Gunnison County Airport.
Petitions for Exemption; Summary of Petitions Received
This notice contains a summary of certain petitions seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of any petition or its final disposition.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Public Notice for Waiver of Aeronautical Land-Use Assurance Jefferson County Airpark Steubenville, OH
The Federal Aviation Administration (FAA) is considering a proposal to change a portion of the airport from aeronautical use to non-aeronautical use and to authorize the release of 1.8473 acres of airport property for non-aeronautical development. The land consists of a portion of a 3.728 acre parcel acquired under grant 3-390074-10. There are no impacts to the airport by allowing the Jefferson County to lease the property. The land is not needed for aeronautical use. Approval does not constitute a commitment by the FAA to financially assist in the lease of the subject airport property nor a determination of eligibility for grant-in-aid funding from the FAA. The disposition of proceeds from the lease of the airport property will be in accordance with FAA's Policy and Procedures Concerning the Use of Airport Revenue, published in the Federal Register on February 16, 1999.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-500 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Empresa Brasileira de Aeronáutica S.A. (EMBRAER) Model ERJ 170 and ERJ 190 Airplanes
We are superseding an existing airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
RTCA Program Management Committee
The FAA is issuing this notice to advise the public of a meeting of the RTCA Program Management Committee.
Proposed Amendment of Class D Airspace; North Bend, OR
This action proposes to modify Class D airspace at Southwest Oregon Regional Airport, North Bend, OR. A portion of the airspace would be modified to allow aircraft at Sunnyhill Airport to arrive and depart outside Class D airspace. This action is necessary for the safety and management of Instrument Flight Rules (IFR) aircraft utilizing both airports.
Proposed Amendment to Class E Airspace; Rawlins, WY
This action proposes to modify Class E airspace at Rawlins Municipal/Harvey Field, Rawlins, WY. Additional controlled airspace is necessary to accommodate aircraft using the Area Navigation (RNAV) Global Positioning System (GPS) Standard Instrument Approach Procedure (SIAP) at Rawlins Municipal/Harvey Field, Rawlins, WY. The FAA is proposing this action to enhance the safety and management of aircraft operations at Rawlins Municipal/Harvey Field, Rawlins, WY. This will also update the airport name from Rawlins Municipal Airport.
Proposed Amendment of Class E Airspace; Graford, TX
This action proposes to amend Class E airspace at Graford, TX. Additional controlled airspace is necessary to accommodate new Standard Instrument Approach Procedures (SIAPs) at Possum Kingdom Airport, Graford, TX. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) operations for SIAPs at Possum Kingdom Airport.
Proposed Amendment of Class E Airspace; Lima, OH
This action proposes to amend Class E airspace at Lima, OH. Additional controlled airspace is necessary to accommodate new Standard Instrument Approach Procedures (SIAPs) at Lima Allen County Airport, Lima, OH. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) operations for SIAPs at Lima Allen County Airport.
Proposed Amendment of Class E Airspace; Dallas-Fort Worth, TX
This action proposes to amend Class E airspace in the Dallas- Fort Worth, TX area. Additional controlled airspace is necessary to accommodate new Standard Instrument Approach Procedures (SIAPs) at Bridgeport Municipal Airport, Bridgeport, TX. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) operations for SIAPs at Bridgeport Municipal Airport.
Airworthiness Directives; Bombardier Model CL-600-1A11 (CL-600), CL-600-2A12 (CL-601), CL-600-2B16 (CL-601-3A) Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Saab AB, Saab Aerosystems Model SAAB 340A (SAAB/SF340A) and SAAB 340B Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Airbus Model A318-111, -112, A319, A320, and A321 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Boeing Model 767 Airplanes
We are adopting a new airworthiness directive (AD) for all Boeing Model 767 airplanes. This AD requires repetitive replacement of the internal electrical feed-through connectors of the boost pumps of the main fuel tank. This AD results from a report of cracking in the epoxy potting compound on the internal feed-through connector of the fuel boost pump in the area of the soldered wire connector lugs. We are issuing this AD to prevent a hazardous electrical path from the dry side to the wet side of the fuel boost pump through a cracked feed- through connector, or between pins or a pin and the shell on one side of the feed-through connector, which could create an ignition source on the wet side of the fuel boost pump or cause a fire in the fuel pump enclosure and lead to subsequent explosion of the fuel tank.
Airworthiness Directives; Boeing Model 737-300, -400, and -500 Series Airplanes
The FAA is superseding an existing airworthiness directive (AD) that applies to all Boeing Model 737-300, -400, and -500 series airplanes. The existing AD currently requires inspecting to determine if certain carriage spindles are installed, repetitive inspections for corrosion and indications of corrosion on affected carriage spindles, and if necessary, related investigative and corrective actions. The existing AD also provides optional terminating action. For certain airplanes, this new AD would reinstate the requirements of the existing AD. This AD results from the exclusion of certain carriage spindles from the requirements of the existing AD, and additional reports of corrosion found on carriage spindles that are located on the outboard trailing edge flaps. We are issuing this AD to detect and correct corrosion of the carriage spindle, which could result in fracture. Fracture of both the inboard and outboard carriage spindles, in the forward ends through the large diameters, on a flap, could adversely affect the airplane's continued safe flight and landing.
Airworthiness Directives; Hawker Beechcraft Corporation (Type Certificate Previously Held by Raytheon Aircraft Company) Models 1900, 1900C, and 1900D Airplanes
We are adopting a new airworthiness directive (AD) to supersede AD 2006-24-11, which applies to certain Hawker Beechcraft Corporation (HBC) (Type Certificate previously held by Raytheon Aircraft Company) Models 1900, 1900C, and 1900D airplanes. AD 2006-24- 11 currently requires you to repetitively inspect the forward, vertical, and aft flanges of both the left and right wing rear spar lower caps for cracks, repair any cracks found, and report the inspection results to the manufacturer. Since we issued AD 2006-24-11, the manufacturer has developed a modification kit to install on the wing rear spar lower caps that will terminate the 200-hour repetitive inspection required in AD 2006-24-11. Consequently, this AD requires installing the new modification kits on the wing rear spar lower caps and terminates the repetitive inspections required in AD 2006-24-11 when the kits are installed. We are issuing this AD to prevent fatigue cracks in the wing rear spar lower caps, which could result in fatigue failure of the wing rear spar lower caps. A rear spar failure could result in complete wing failure and the wing separating from the airplane.
Airworthiness Directives; Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; PIAGGIO AERO INDUSTRIES S.p.A Model PIAGGIO P-180 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Office of Commercial Space Transportation; Notice of Availability of a Record of Decision (ROD) for Streamlining the Processing of Experimental Permit Applications
In accordance with the National Environmental Policy Act of 1969, as amended (NEPA) (42 U.S.C. 4321 et seq.), Council on Environmental Quality NEPA implementing regulations (40 CFR parts 1500- 1508), and FAA Order 1050.1E, Change 1, the FAA is announcing the availability of the ROD for streamlining the environmental review of experimental permit applications for the launch and/or reentry of reusable suborbital rockets. The Federal action selected in the ROD is the FAA's issuance of experimental permits for the launch and reentry of reusable suborbital rockets from both FAA-licensed and non-licensed launch sites using the Final Programmatic Environmental Impact Statement for Streamlining the Processing of Experimental Permit Applications (PEIS), to the maximum extent feasible, as the basis for determining the environmental consequences of issuing the permits.
Airworthiness Directives; Cessna Aircraft Company 150 and 152 Series Airplanes
We are adopting a new airworthiness directive (AD) to revise AD 2009-10-09, which applies to Cessna Aircraft Company (Cessna) 150 and 152 series airplanes. AD 2009-10-09 requires either installing a placard prohibiting spins and other acrobatic maneuvers in the airplane or replacing the rudder stop, the rudder stop bumper, and the attachment hardware with a new rudder stop modification kit and replacing the safety wire with jamnuts. Since we issued AD 2009-10-09, we became aware of a need to clarify certain model and serial number designations, remove the duplicate requirement of replacing the safety wire with jamnuts, and clarify the conditional acceptability of using modification kit part number (P/N) SK152-25 as a terminating action to this AD. Consequently, this AD retains the actions currently required in AD 2009-10-09, corrects model designation for certain serial numbers, removes the duplicate requirement of replacing safety wire with jamnuts, and clarifies the conditional acceptability of using modification kit P/N SK152-25 as a terminating action to this AD. We are issuing this AD to prevent the rudder from traveling past the normal travel limit. Operation in this non-certificated control position is unacceptable and could cause undesirable consequences, such as contact between the rudder and the elevator.
Airworthiness Directives; Saab AB, Saab Aerosystems Model SAAB 340A (SAAB/SF340A) and SAAB 340B Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above that would revise an existing AD. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Fokker Model F.27 Mark 050, 200, 300, 400, 500, 600, and 700 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above that would revise an existing AD. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; 328 Support Services GmbH Dornier Model 328-300 Airplanes
The FAA is revising an existing airworthiness directive (AD), which applies to certain 328 Support Services GmbH Dornier Model 328- 300 airplanes. That AD currently requires modifying the electrical wiring of the fuel pumps; installing insulation at the flow control and shut-off valves, and other components of the environmental control system; installing markings at fuel wiring harnesses; replacing the wiring harness of the auxiliary fuel system with a new wiring harness; and installing insulated couplings in the fuel system; as applicable. That AD also currently requires revising the Airworthiness Limitations section of the Instructions for Continued Airworthiness to incorporate new inspections of the fuel tank system. This AD clarifies the intended effect of the AD on spare and on-airplane fuel tank system components. This AD results from fuel system reviews conducted by the manufacturer. We are issuing this AD to reduce the potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in fuel tank explosions and consequent loss of the airplane.
Airworthiness Directives; Turbomeca Arriel 2B and 2B1 Turboshaft Engines
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Bombardier Model CL-600-2C10 (Regional Jet Series 700, 701, & 702) Airplanes, Model CL-600-2D15 (Regional Jet Series 705) Airplanes, and Model CL-600-2D24 (Regional Jet Series 900) Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above that would supersede an existing AD. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: Following in-flight test deployments on CL-600-2B19 aircraft, several Air-Driven generators (ADGs) failed to come on-line. Investigation revealed that, as a result of a wiring anomaly that had not been detected during ADG manufacture, a short circuit was possible between certain internal wires and their metallic over-braided shields, which could result in the ADG not providing power when deployed.
Airworthiness Directives; Gulfstream Aerospace LP Model Gulfstream G150 Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: IAI Company Flammability tests revealed that the baggage compartment rubber seals manufactured by Gumiyan are not compliant with FAR [Federal Aviation Regulation] 25, Appendix F, Part I requirements.
Airworthiness Directives; Bombardier Model CL-600-2C10 (Regional Jet Series 700, 701 & 702), CL-600-2D15 (Regional Jet Series 705), and CL-600-2D24 (Regional Jet Series 900) Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: There have been several in-service cases reported of impact damage to the blowout (decompression) panel protective cage assemblies installed in the aft baggage cargo compartment. When damaged, these cages could prevent proper operation of the blowout panels, with potential degradation of smoke detection and fire extinguishing capabilities in the event of a fire.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.