Federal Aviation Administration November 30, 2009 – Federal Register Recent Federal Regulation Documents
Results 1 - 7 of 7
Airworthiness Directives; PIAGGIO AERO INDUSTRIES S.p.A Model PIAGGIO P-180 Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: Cracks have been detected on the upper flange (cap) of several ``0'' pressure bulkheads on the production line; none of the cracks had spread across the thickness of material. Investigation revealed that all ``0'' pressure bulkheads installed on aircraft from MSN 1106 up to 1189 could have the same cracks.
Airworthiness Directives; Empresa Brasileira de Aeronáutica S.A. (EMBRAER) Model EMB-500 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; SOCATA Model TBM 700 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; General Electric Company (GE) CF34-1A, CF34-3A, and CF34-3B Series Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for GE CF34-1A, CF34-3A, and CF34-3B series turbofan engines. This AD requires removing from service certain part number (P/N) and serial number (SN) fan blades within compliance times specified in this AD, inspecting the fan blade abradable rub strip on certain engines for wear, inspecting the fan blades on certain engines for cracks, inspecting the aft actuator head hose fitting for correct position, and, if necessary, repositioning the hose fitting. This AD results from a report of an under-cowl fire and a failed fan blade. We are issuing this AD to prevent failure of certain P/N and SN fan blades and aft actuator head hoses, which could result in an under-cowl fire and subsequent damage to the airplane.
Airworthiness Directives; Honeywell International Inc. LTS101 Series Turboshaft and LTP101 Series Turboprop Engines
The FAA is adopting a new airworthiness directive (AD) for Honeywell International Inc. LTS101 series turboshaft and LTP101 series turboprop engines with certain gas generator turbine discs installed. This AD requires reducing the life limits for certain gas generator turbine discs. This AD results from an error in a change to the engineering drawing for the gas generator turbine disc from which Honeywell manufactured 260 discs. We are issuing this AD to prevent rupture of the gas generator turbine disc, which could result in uncontained engine failure and damage to the aircraft.
Airworthiness Directives; Cessna Aircraft Company Model 525A Airplanes
We are adopting a new airworthiness directive (AD) for certain Cessna Aircraft Company (Cessna) Model 525A airplanes. This AD requires you to repetitively inspect the thrust attenuator paddle assemblies for loose and damaged fasteners and for cracks. This AD also requires you to replace loose or damaged fasteners and replace cracked thrust attenuator paddles found during any inspection. This AD results from reports of fatigue cracks found in thrust attenuator paddles. We are issuing this AD to detect and correct loose and damaged fasteners and cracks in the thrust attenuator paddles, which could result in in- flight departure of the thrust attenuator paddles. This failure could lead to rudder and elevator damage and result in loss of control.
Special Conditions: Embraer S.A., Model EMB-505; High Altitude Operations
These special conditions are issued for the Embraer S.A. Model EMB-505 airplane. This airplane will have a novel or unusual design feature(s) associated with the operation at altitudes not previously envisioned. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
