Federal Aviation Administration September 22, 2009 – Federal Register Recent Federal Regulation Documents
Results 1 - 7 of 7
Proposed Amendment of Class E Airspace; Red Oak, IA
This action proposes to amend Class E airspace at Red Oak, IA. Additional controlled airspace is necessary to accommodate new Standard Instrument Approach Procedures (SIAPs) at Red Oak Municipal Airport, Red Oak, IA. This action would also update the geographic coordinates of Red Oak Municipal Airport and the Red Oak NDB to coincide with the FAA's National Aeronautical Charting Office. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) operations for SIAPs at Red Oak Municipal Airport.
Forty-Ninth Meeting, RTCA Special Committee 186: Automatic Dependent Surveillance-Broadcast (ADS-B)
The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 186: Automatic Dependent Surveillance-Broadcast (ADS-B).
Petition for Exemption; Summary of Petition Received
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Airworthiness Directives; Teledyne Continental Motors O-470, IO-470, TSIO-470, IO-520, TSIO-520, IO-550, and IOF-550 Series Reciprocating Engines
The FAA is adopting a new airworthiness directive (AD) for Teledyne Continental Motors (TCM) O-470, IO-470, TSIO-470, IO-520, TSIO-520, IO-550, and IOF-550 series reciprocating engines with TCM EQ3 cylinders installed. This AD requires initial and repetitive visual inspections of TCM EQ3 cylinders for cracks. This AD also requires removal of all EQ3 cylinders as terminating action to the repetitive visual inspections. This AD results from reports of 35 EQ3 cylinders found cracked. We are issuing this AD to prevent loss of engine power due to cracks in the cylinder head, possible engine failure, and fire in the engine compartment.
Airworthiness Directives; Boeing Model 747 Airplanes
We are adopting a new airworthiness directive (AD) for certain Boeing Model 747 airplanes. This AD requires repetitive inspections for cracking of the fuselage frames in section 41, and corrective actions if necessary. This AD results from reports of cracking in fuselage frames made of 2024 aluminum alloy that were installed during previous modification of the frames in section 41 and during production. We are issuing this AD to detect and correct frame cracks, which could result in cracking of the adjacent fuselage skin and consequent rapid decompression of the airplane.
Airworthiness Directives; McCauley Propeller Systems Propeller Models B5JFR36C1101/114GCA-0, C5JFR36C1102/L114GCA-0, B5JFR36C1103/114HCA-0, and C5JFR36C1104/L114HCA-0
The FAA is superseding an existing airworthiness directive (AD) for McCauley Propeller Systems propeller models B5JFR36C1101/ 114GCA-0, C5JFR36C1102/L114GCA-0, B5JFR36C1103/114HCA-0, and C5JFR36C1104/L114HCA-0. That AD currently requires initial and repetitive fluorescent penetrant inspections (FPI) and eddy current inspections (ECI) of propeller blades for cracks, and if any crack indications are found, removing the blade from service. That AD also mandates a life limit for the blades. This AD requires the same inspections, adds a visual inspection, and mandates a new propeller blade life limit. This AD also requires removing propeller blades with more than 10,000 operating hours time-since-new (TSN), before further flight. This AD also requires removal from service of all the propeller blades and the propeller hub if one or more propeller blades have been found cracked on a propeller assembly. This AD also requires removing from service all C-5963 split retainers. This AD results from eight reports of propeller blades found cracked since May of 2006. We are issuing this AD to detect cracks in the propeller blade that could cause failure and separation of the propeller blade and loss of control of the airplane.
Airworthiness Directives; Airbus Model A300, A310, and A300-600 Series Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to certain Airbus Model A300 and A310 series airplanes. That AD currently requires replacement of the nose landing gear drag strut upper attachment pin. This new AD requires revising the Airworthiness Limitations section (ALS) of the Instructions for Continued Airworthiness (ICA) to require additional life limits and/or replacements for certain main landing gear and nose landing gear components, and also expands the applicability. This AD results from revisions to the ALS of the ICA to include new or more restrictive life limits and/or replacements. We are issuing this AD to ensure the continued structural integrity of these airplanes.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
