Federal Aviation Administration May 6, 2008 – Federal Register Recent Federal Regulation Documents
Results 1 - 5 of 5
Airworthiness Directives; McDonnell Douglas Model DC-8-61, DC-8-61F, DC-8-63, DC-8-63F, DC-8-71F, and DC-8-73F Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain McDonnell Douglas Model DC-8-61, DC-8-61F, DC-8-63, DC-8- 63F, DC-8-71F, and DC-8-73F airplanes. For certain airplanes, this proposed AD would require non-destructive testing (NDT) to detect cracks of the door jamb corners of the forward and aft service doors, and doing applicable related investigative and corrective actions. For certain other airplanes, this proposed AD would require inspecting and repairing if necessary or replacing previously repaired door jamb corners with an applicable repair. This proposed AD results from reports of numerous cases of cracks in the skin at the door jamb corners of the forward and aft service doors. We are proposing this AD to detect and correct fatigue cracking of door jamb corners of the forward and aft service doors, which could adversely affect the structural integrity of the airplane.
Airworthiness Directives; BAE Systems (Operations) Limited Model BAe 146 and Model Avro 146-RJ Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from service history of incidents and accidents involving transport category turbojet airplanes without leading edge high lift devices. This service history shows that even small amounts of frost, ice, snow, or slush on the wing leading edges or forward upper wing surfaces can cause an adverse change in the stall speeds and stall characteristics, and can negate the protection provided by a stall protection system. While there have been no accidents or incidents related to wing contamination associated with the BAE Systems (Operations) Limited Model BAe 146 and Model Avro 146- RJ airplanes, these airplanes are also transport category turbojet airplanes without leading edge high lift devices, and therefore may be similarly sensitive to small amounts of wing contamination. This AD requires revising the airplane flight manual to include a new cold weather operations limitation. We are issuing this AD to prevent possible loss of control on takeoff resulting from even small amounts of frost, ice, snow, or slush on the wing leading edges or forward upper wing surfaces. We are issuing this AD to require actions to correct the unsafe condition on these products.
Airworthiness Directives; Eurocopter France Model EC120B Helicopters
We are adopting a new airworthiness directive (AD) for Eurocopter France Model EC120B helicopters. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on a helicopter. The aviation authority of France, with which we have a bilateral agreement, states in the MCAI:
Airworthiness Directives; Bell Helicopter Textron Model 204B, 205A, 205A-1, 205B, 210, 212, 412, 412CF, and 412EP Helicopters
This amendment adopts a new airworthiness directive (AD) for the specified Bell Helicopter Textron (Bell) model helicopters. This action requires certain checks and inspections of each tail rotor blade assembly (T/R blade) at specified intervals and repairing or replacing, as applicable, any unairworthy T/R blade. This amendment is prompted by three failures of a T/R blade occurring during flight and a recent incident of a cracked T/R blade discovered during a scheduled visual inspection. The actions specified in this AD are intended to detect damage to a T/R blade that could lead to cracking of a T/R blade and subsequent loss of control of the helicopter.
Receipt of Noise Compatibility Program and Request for Review, Burlington International Airport, South Burlington, VT
The Federal Aviation Administration (FAA) announces that it is reviewing a proposed noise compatibility program that was submitted for Burlington International Airport under the provisions of 49 U.S.C. 47504 et seq. (the Aviation Safety and Noise Abatement Act, hereinafter referred to as ``the Act'') and 14 CFR Part 150 by the City of Burlington. This program was submitted subsequent to a determination by FAA that associated noise exposure maps submitted under 14 CFR Part 150 for Burlington International Airport were in compliance with applicable requirements, effective November 6, 2007. The proposed noise compatibility program will be approved or disapproved on or before October 20, 2008.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.