Federal Aviation Administration November 9, 2006 – Federal Register Recent Federal Regulation Documents
Results 1 - 6 of 6
Special Conditions: Boeing Model 737 Series Airplanes; Seats With Non-Traditional, Large, Non-Metallic Panels
This action proposes special conditions for Boeing Model 737 series airplanes. These airplanes will have a novel or unusual design feature(s) associated with seats that include non-traditional, large, non-metallic panels that would affect survivability during a post-crash fire event. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Airworthiness Directives; Dowty Propellers R321/4-82-F/8; R324/4-82-F/9; R333/4-82-F/12; and R334/4-82-F/13 Propellers
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; B-N Group Ltd. BN-2, BN-2A, BN-2B, BN-2T, and BN-2T-4R Series (All Individual Models Included in Type Certificate Data Sheet (TCDS) A17EU, Revision 16, Dated December 9, 2002) Airplanes
The FAA adopts a new airworthiness directive (AD) for all B-N Group Ltd. BN-2, BN-2A, BN-2B, BN-2T, and BN-2T-4R series (all individual models included in Type Certificate Data Sheet (TCDS) A17EU, Revision 16, dated December 9, 2002) airplanes. This AD requires you to inspect the horizontal stabilizer attachment bolts and anchor nuts for damage and wear and replace damaged and/or worn parts with new, modified parts. If no damaged or worn parts are found during the inspection, this AD requires you to replace the horizontal stabilizer attachment bolts and anchor nuts at a specified time with new, modified parts. This AD results from mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for the United Kingdom. We are issuing this AD to detect and correct damaged and/or worn horizontal stabilizer attachment bolts and anchor nuts, which could result in failure of the horizontal stabilizer. This failure could result in loss of control.
Airworthiness Directives; Air Tractor, Inc. Model AT-602 Airplanes
The FAA adopts a new airworthiness directive (AD) for all Air Tractor, Inc. (Air Tractor) Model AT-602 airplanes. This AD requires you to repetitively inspect (using the eddy current method) the wing center splice joint two outboard fastener holes on both of the wing main spar lower caps for fatigue cracking; repair or replace any wing main spar lower cap where fatigue cracking is found; and report any fatigue cracking found. This AD results from fatigue cracking at the wing center splice joint outboard fastener hole in one of the wing main spar lower caps. We are issuing this AD to detect and correct cracks in the wing main spar lower cap, which could result in failure of the spar cap and lead to wing separation and loss of control of the airplane.
Notice of Availability of Draft Advisory Circulars, Other Policy Documents and Proposed Technical Standard Orders
The FAA's Aviation Safety, an organization responsible for the certification, production approval, and continued airworthiness of aircraft, and certification of pilots, mechanics, and others in safety related positions, publishes proposed non-regulatory documents that are available for public comment on the Internet at https://www.faa.gov/ aircraft/draftdocs/.
Approval of Noise Compatibility Program, Columbia Metropolitan Airport, Columbia, SC
The Federal Aviation Administration (FAA) announces its findings on the Noise Compatibility Program submitted by the Richland- Lexington Airport District under the provisions of 49 U.S.C. (the Aviation Safety and Noise Abatement Act, hereinafter referred to as ``the Act)'' and 14 CFR part 150. These findings are made in recognition of the description of Federal and nonfederal responsibilities in Senate Report No. 96-52 (1980). On July 29, 2005, the FAA determined that the noise exposure maps submitted by the Richland-Lexington Airport District under Part 150 were in compliance with applicable requirements. On September 18, 2006, the FAA approved the Columbia Metropolitan Airport noise compatibility program. Most of the recommendations of the program were approved.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
