Federal Aviation Administration 2005 – Federal Register Recent Federal Regulation Documents

Results 251 - 300 of 2,027
Airworthiness Directives; Airbus Model A319-100, A320-200, A321-100, and A321-200 Series Airplanes
Document Number: 05-22443
Type: Proposed Rule
Date: 2005-11-10
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus Model A319-100, A320-200, A321-100, and A321-200 series airplanes. This proposed AD would require repetitive inspections for corrosion in the inside and outside lower walls of each type A, D, E, and F lavatory wall that has at least one wall-mounted cabin attendant seat, and related investigative and corrective actions if necessary. The repetitive inspections may be terminated by repairing the wall with composite material, or replacing the entire wall with a new wall made of composite material. This proposed AD results from reports of corrosion in the lower part of the lavatory walls due to water ingress. We are proposing this AD to detect and correct corrosion and damage on the lower part of the lavatory walls, which could compromise the structural integrity of the cabin attendant seat attachments, and cause injury to the cabin attendants during a crash landing.
Airworthiness Directives; Rolls-Royce Corporation (formerly Allison Engine Company, Allison Gas Turbine Division, and Detroit Diesel Allison) 250-B and 250-C Series Turboprop and Turboshaft Engines
Document Number: 05-22437
Type: Proposed Rule
Date: 2005-11-10
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for Rolls-Royce Corporation 250-B and 250-C series turboprop and turboshaft engines with certain part numbers (P/Ns) of gas producer rotor assembly tie bolts manufactured by EXTEX Ltd., Pacific Sky Supply Inc., Rolls-Royce Corporation (RRC), and Superior Air Parts Inc. This proposed AD would require operators to remove from service affected gas producer rotor assembly tie bolts. This proposed AD results from eleven reports of RRC tie bolt failure due to high cycle fatigue. We are proposing this AD to prevent tie bolt failure that could cause loss of engine power, resulting in a first stage turbine wheel overspeed and an uncontained engine failure.
Agency Information Collection Activity Under OMB Review, Request for Comments; Renewal of an Approved Information Collection Activity, Aviation Medical Examiner Program
Document Number: 05-22403
Type: Notice
Date: 2005-11-10
Agency: Federal Aviation Administration, Department of Transportation
The FAA invites public comments about our intention to request the Office of Management and Budget's (OMB) renewal of a current information collection. The Federal Register Notices with a 60-day comment period soliciting comments on the following collection of information was published on July 27, 2005, vol. 70, 143, pages 43502-43503. This collection of information is necessary in order to determine applicants' professional and personal qualifications for certification as an Aviation Medical Examiner (AME). The information is used to develop the AME directories used by airmen who must undergo periodic examinations by AMEs.
Agency Information Collection Activity Under OMB Review, Request for Comments; Renewal of an Approved Information Collection Activity, New Final rule Certification of Repair Stations, Part 145 of Title 14, CFR Compliance of 145.163
Document Number: 05-22402
Type: Notice
Date: 2005-11-10
Agency: Federal Aviation Administration, Department of Transportation
The FAA invites public comments about our intention to request the Office of Management and Budget's (OMB) renewal of a current information collection. The Federal Register Notices with a 60-day comment period soliciting comments on the following collection of information was published on July 27, 2005, vol. 70, 143, pages 43502-43503. Information is collected from applicants who wish to obtain repair station certification. Applicants must submit FAA form 8310-3 to the appropriate FAA flight standards district office for review. When all the requirements have been met, and air agency certificate and repair station operations specifications with appropriate rating and limitations are issued.
RTCA Special Committee 204: 406 MHz Emergency Locator Transmitters
Document Number: 05-22401
Type: Notice
Date: 2005-11-10
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 204: 406 MHz Emergency Locator Transmitters
RTCA Special Committee 147: Minimum Operational Performance Standards for Traffic Alert and Collision Avoidance Systems Airborne Equipment
Document Number: 05-22400
Type: Notice
Date: 2005-11-10
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 147: Minimum Operational Performance Standards for Traffic Alert and Collision Avoidance Systems Airborne Equipment.
RTCA Special Committee 186: Automatic Dependent Surveillance-Broadcast (ADS-B)
Document Number: 05-22399
Type: Notice
Date: 2005-11-10
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 186: Automatic Dependent SurveillanceBroadcast (ADS-B).
Random Drug and Alcohol Testing Percentage Rates of Covered Aviation Employees for the Period of January 1, 2006, Through December 31, 2006
Document Number: 05-22398
Type: Notice
Date: 2005-11-10
Agency: Federal Aviation Administration, Department of Transportation
The FAA has determined that the minimum random drug and alcohol testing percentage rates for the period January 1, 2006, through December 31, 2006, will remain at 25 percent of covered aviation employees for random drug testing and 10 percent of covered aviation employees for random alcohol testing.
Receipt of Noise Compatibility Program and Request for Review; Vero Beach Municipal Airport, Vero Beach, FL
Document Number: 05-22397
Type: Notice
Date: 2005-11-10
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration (FAA) announces that it is reviewing a proposed noise compatibility program that was submitted for Vero Beach Municipal Airport under provisions of 49 U.S.C. 47501 et. seq (the Aviation Safety and Noise Abatement Act hereinafter referred to as ``the Act'') and 14 CFR part 150 by the city of Vero Beach, Florida. This program was submitted subsequent to a determination by AA that the associated noise exposure maps submitted under 14 CFR part 150 for Vero Beach Airport were in compliance with applicable requirements effective October 28, 2003. The proposed noise compatibility program will be approved or disapproved on or before May 1, 2006.
Proposed Establishment of Class E5 Airspace; Hill City, KS
Document Number: 05-22396
Type: Proposed Rule
Date: 2005-11-10
Agency: Federal Aviation Administration, Department of Transportation
This notice proposes to establish Class E5 airspace at Hill City, KS.
Modification of Class E Airspace; Kennett, MO
Document Number: 05-22395
Type: Rule
Date: 2005-11-10
Agency: Federal Aviation Administration, Department of Transportation
This action amends Title 14 Code of Federal Regulations, part 71 (14 CFR 71) by modifying Class E airspace at Kennett, MO. The establishment of Non-Directional Beacon (NDB) Instrument Approach Procedures (IAP) to Runway 2 and Runway 20 has made this action necessary. Additional controlled airspace extending upward from 700 feet above the surface is needed to contain aircraft executing these IAPs. The intended effect of this rule is to provide adequate controlled airspace for Instrument Flight Rules operations at Kennett Memorial Airport, Kennett, MO.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135 Airplanes and Model EMB-145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP Airplanes
Document Number: 05-22311
Type: Proposed Rule
Date: 2005-11-09
Agency: Federal Aviation Administration, Department of Transportation
This document revises an earlier proposed airworthiness directive (AD), applicable to certain Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135 and EMB-145 series airplanes, that would have required inspecting the pilot's and co-pilot's seat tracks for proper locking of the seats, and adjusting or replacing the seat tracks, if necessary. This new action revises the proposed rule by revising the applicability statement, and requiring replacement of the seat locking pin on certain SICMA-brand seats. The actions specified by this new proposed AD are intended to prevent uncommanded movement of the pilot's or co-pilot's seat, which could interfere with the operation of the airplane and consequent temporary loss of airplane control. This action is intended to address the identified unsafe condition.
Airworthiness Directives; Boeing Model 767-200, -300, and -300F Series Airplanes
Document Number: 05-22310
Type: Proposed Rule
Date: 2005-11-09
Agency: Federal Aviation Administration, Department of Transportation
The FAA is revising an earlier proposed airworthiness directive (AD) for certain Boeing Model 767-200, -300, and -300F series airplanes. The original NPRM would have required verifying the part and serial numbers of certain main landing gear (MLG) bogie beam pivot pins; replacing those pivot pins with new or overhauled pivot pins if necessary; and ultimately replacing all pivot pins with new, improved pivot pins. The original NPRM was prompted by reports indicating that numerous fractures of the MLG bogie beam pivot pin have been found and that some pivot pins may have had improper rework during manufacture. This action revises the original NPRM by adding new inspections; revising the inspection thresholds and repetitive intervals; and revising the compliance time for replacing all pivot pins with new- material pins. We are proposing this supplemental NPRM to prevent fracture of the MLG bogie beam pivot pin, which could lead to possible loss of the MLG truck during takeoff or landing and consequent loss of control of the airplane.
Airworthiness Directives; Bombardier Model CL-600-2C10 (Regional Jet Series 700, 701, & 702), CL-600-2D15 (Regional Jet Series 705), and CL-600-2D24 (Regional Jet Series 900) Airplanes
Document Number: 05-22307
Type: Proposed Rule
Date: 2005-11-09
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for certain Bombardier Model CL-600-2C10 (Regional Jet Series 700, 701, & 702), CL-600-2D15 (Regional Jet Series 705), and CL-600-2D24 (Regional Jet Series 900) airplanes. This proposed AD would require replacing the Camloc fasteners on the sidewall of the center pedestal. This proposed AD results from reports of the Camloc fasteners on the sidewall of the center pedestal disengaging and interfering with an inboard rudder pedal. We are proposing this AD to prevent these fasteners from disengaging and interfering with an inboard rudder pedal, which could reduce directional controllability of the airplane.
Airworthiness Directives; Boeing Model 777-200 and -300 Series Airplanes
Document Number: 05-22306
Type: Proposed Rule
Date: 2005-11-09
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for certain Boeing Model 777-200 and -300 series airplanes. This proposed AD would require inspecting the lower web of the aft fairing of engine struts for any discoloration and doing any related investigative and corrective action if necessary; inspecting the heat shield castings for any damage and doing any corrective action if necessary; installing gap cover strips; and replacing insulation blankets with new insulation blankets. This proposed AD results from a report that several discolored fairing lower webs and some damaged/ deteriorated insulation blankets were found in the aft fairings of engine struts. We are proposing this AD to prevent cracking of lower webs of the aft fairings, which could result in flammable hydraulic fluid leaking onto or near an ignition source, and possibly result in an uncontrollable fire in the engine strut area.
Airworthiness Directives; Short Brothers Model SD3-60 SHERPA, SD3-SHERPA, and SD3-60 Airplanes
Document Number: 05-22305
Type: Proposed Rule
Date: 2005-11-09
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to supersede an existing airworthiness directive (AD) that applies to all Short Brothers Model SD3-60 and SD3- SHERPA airplanes. The existing AD currently requires an inspection of the fork end of the rear pintle pin on each main landing gear (MLG) to verify that sealant is properly applied and is undamaged, and related investigative/corrective actions if necessary. This proposed AD would add an inspection for correctly applied sealant on the MLG rear pintle pin assemblies, and related investigative/corrective actions if necessary. This proposed AD would also expand the applicability of the existing AD. This proposed AD results from a new report of a cracked pintle pin fork end. We are proposing this AD to prevent stress- corrosion cracking and subsequent failure of the MLG.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-120, -120ER, -120FC, -120QC, and -120RT Airplanes
Document Number: 05-22304
Type: Proposed Rule
Date: 2005-11-09
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for certain EMBRAER Model EMB-120, -120ER, -120FC, -120QC, and -120RT airplanes. This proposed AD would require installing a rivet and washer in the hole of the upper frame of the auxiliary power unit (APU) firewall. This proposed AD results from a report indicating that, during production, a pinhole was left open at the upper frame of the APU firewall. We are proposing this AD to ensure that the APU compartment is isolated from the rest of the airplane in the event of an APU fire.
Airworthiness Directives; Hamilton Sundstrand Power Systems (Formerly Sundstrand Power Systems) Auxiliary Power Units Models T-62T-46C2, T-62T-46C2A, T-62T-46C3, T-62T-46C7, and T-62T-46C7A
Document Number: 05-22208
Type: Rule
Date: 2005-11-09
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for Hamilton Sundstrand Power Systems (formerly Sundstrand Power Systems) auxiliary power units (APUs) models T-62T-46C2, T-62T-46C2A, T-62T- 46C3, T-62T-46C7, and T-62T-46C7A, with compressor impeller assembly, part number (P/N) 4502020 or 4502020A, installed. This AD requires removal from service of those compressor impeller assemblies at reduced service life limits. This AD results from two reports of uncontained failures of compressor impeller assemblies. We are issuing this AD to prevent an uncontained APU failure and damage to the airplane.
Airworthiness Directives; General Electric Company (GE) CF6-80E1A1, -80E1A2, -80E1A3, -80E1A4, and -80E1A4/B Turbofan Engines
Document Number: 05-22207
Type: Rule
Date: 2005-11-09
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for General Electric Company (GE) CF6-80E1A1, -80E1A2, -80E1A3, -80E1A4, and -80E1A4/B turbofan engines. This AD requires initial and repetitive fluorescent-penetrant inspections (FPI) of certain areas of high pressure compressor (HPC) cases, part number (P/N) 1509M97G07 and P/N 2083M69G03. This AD results from the discovery that HPC cases, P/N 1509M97G07 and P/N 2083M69G03, were inadvertently left out of the Airworthiness Limitations Section (ALS), Chapter 05-21-02, of GE Engine Manual, GEK 99376, Revision 17. We are issuing this AD to prevent failure of the HPC case aft mount flange, due to cracking.
Notice of Availability and Request for Comments; Extension of Comment Period for Enhanced Airworthiness Program for Airplane Systems Advisory Circulars
Document Number: 05-22250
Type: Notice
Date: 2005-11-08
Agency: Federal Aviation Administration, Department of Transportation
This action extends the comment period for the 12 draft advisory circulars (ACs) related to the Enhanced Airworthiness Program for Airplane Systems proposed rule, which was published on October 6, 2005. The 12 Notices of availability for the draft ACs include an earlier close of comment period date than the proposed rule. The purpose of this action is to make the close of comment period date for the 12 draft ACs and the proposed rule the same.
Airworthiness Directives; Boeing Model 727 Airplanes
Document Number: 05-22214
Type: Rule
Date: 2005-11-08
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for all Boeing Model 727 airplanes. This AD requires revising the Limitations section of the airplane flight manual to prohibit resetting a tripped circuit breaker for a fuel pump. This AD results from fuel system reviews conducted by the manufacturer. We are issuing this AD to prohibit the resetting of a tripped circuit breaker for a fuel pump, which could allow an electrical fault to override the protective features of the circuit breaker, and could result in sparks inside the fuel tank, ignition of fuel vapors, and consequent fire or explosion.
Washington, DC Metropolitan Area Special Flight Rules Area; Reopening of Comment Period and Intent To Hold Public Meeting
Document Number: 05-22261
Type: Proposed Rule
Date: 2005-11-07
Agency: Federal Aviation Administration, Department of Transportation
In this action, the FAA reopens the comment period and announces its intention to hold a public meeting concerning the ``Washington, DC Metropolitan Area Special Flight Rules Area'' NPRM that was published August 4, 2005. In that document, the FAA proposed to codify current flight restrictions for certain aircraft operations in the Washington, DC Metropolitan Area. This reopening is in response to requests from Members of Congress and industry associations.
Establishment of Organization Designation Authorization Program
Document Number: 05-22129
Type: Rule
Date: 2005-11-07
Agency: Federal Aviation Administration, Department of Transportation
This notice announces the Office of Management and Budget's approval of the information collection requirements in the final rule, Establishment of Organization Designation Authorization Program. Affected parties were not required to comply with the information collection requirements of this rule until a notification of OMB approval was published in the Federal Register.
Petitions for Exemption; Summary of Petitions Received
Document Number: 05-22128
Type: Notice
Date: 2005-11-07
Agency: Federal Aviation Administration, Department of Transportation
Pursuant to FAA's rulemaking provisions governing the application, processing, and disposition of petitions for exemption, part 11 of Title 14, Code of Federal Regulations (14 CFR), this notice contains a summary of a certain petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of any petition or its final disposition.
Agency Information Collection Activity Under OMB Review, Request for Comments; Renewal of an Approved Information Collection Activity, Antidrug and Alcohol Misuse Prevention Programs for Personnel Engaged in Specified Aviation Activities
Document Number: 05-22081
Type: Notice
Date: 2005-11-07
Agency: Federal Aviation Administration, Department of Transportation
14 CFR part 121, Appendices I and J, require specified aviation employers to implement FAA-approved antidrug and alcohol misuse prevention programs and conduct testing of safety-sensitive employees. To monitor compliance, institute program improvements, and anticipate program problem areas, the FAA receives report from the aviation industry.
Agency Information Collection Activity Under OMB Review, Request for Comments; Renewal of an Approved Information Collection Activity, Exemptions for Air Taxi and Commuter Air Carrier Operations
Document Number: 05-22080
Type: Notice
Date: 2005-11-07
Agency: Federal Aviation Administration, Department of Transportation
14 CFR part 298 requires air carrier operators to obtain a certificate of public convenience and necessity from the DOT, with the exception of air taxi and commuter air operators. In order to be exempted from this requirement, such operators must apply for exemption with the DOT. This collection is used to ensure that affected companies comply with the requirements under this regulation.
Modification of Class E Airspace; Akron, OH
Document Number: C5-21586
Type: Rule
Date: 2005-11-04
Agency: Federal Aviation Administration, Department of Transportation
Airworthiness Directives; Turbomeca Arriel 1B, 1D and 1D1 Turboshaft Engines
Document Number: 05-22007
Type: Proposed Rule
Date: 2005-11-04
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for Turbomeca Arriel 1B, 1D and 1D1 turboshaft engines. This proposed AD would require inspecting the 2nd stage nozzle guide vanes (NGV2) for wall thickness. This proposed AD results from one instance of a fractured 2nd stage turbine blade followed by an uncommanded engine shutdown. We are proposing this AD to detect and prevent perforation of the NGV2 that could cause fracture of a turbine blade that could result in an uncommanded engine in-flight shutdown.
Airplane Performance and Handling Qualities in Icing Conditions
Document Number: 05-21793
Type: Proposed Rule
Date: 2005-11-04
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to introduce new airworthiness standards to evaluate the performance and handling characteristics of transport category airplanes in icing conditions. This proposed action would improve the level of safety for new airplane designs when operating in icing conditions, and would harmonize the U.S. and European airworthiness standards for flight in icing conditions.
Proposed Advisory Circular 25.21-1X, Performance and Handling Characteristics in the Icing Conditions Specified in Part 25, Appendix C
Document Number: 05-21791
Type: Notice
Date: 2005-11-04
Agency: Federal Aviation Administration, Department of Transportation
This notice announces the availability of and requests comments on a proposed advisory circular (AC) that provides methods acceptable to the Administrator related to the proposed certification requirements for performance and handling characteristics of transport category airplanes affected by flight in the icing conditions defined in appendix C of Title 14, Code of Federal Regulations (CFR) part 25. This notice is necessary to give all interested persons an opportunity to present their views on the proposed AC.
Airworthiness Directives; Pilatus Aircraft Ltd. Models PC-12 and PC-12/45 Airplanes
Document Number: 05-21803
Type: Rule
Date: 2005-11-03
Agency: Federal Aviation Administration, Department of Transportation
The FAA adopts a new airworthiness directive (AD) for certain Pilatus Aircraft Ltd. (Pilatus) Models PC-12 and PC-12/45 airplanes. This AD requires you to inspect the left and right main landing gear (MLG) assemblies for any part number (P/N) 532.10.12.077 or FAA- approved equivalent part number bolts that do not have white primed and painted heads; and replace any bolt found with new P/N 532.10.12.077F or FAA-approved equivalent part number bolts in all MLG assemblies. This AD results from mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Switzerland. We are issuing this AD to detect and correct any P/N 532.10.12.077 or FAA- approved equivalent part number bolts that do not have white primed and painted heads, which could result in corrosion of the bolt and consequent failure of the bolt. This failure could lead to MLG collapse during airplane landing and take-off operations with consequent loss of airplane control.
Airworthiness Directives; GROB-WERKE Model G120A Airplanes
Document Number: 05-21800
Type: Rule
Date: 2005-11-03
Agency: Federal Aviation Administration, Department of Transportation
The FAA adopts a new airworthiness directive (AD) for all GROB-WERKE Model G120A airplanes. This AD requires you to inspect for signs of any chafing damage to the attachment cables of the switch panels below the left-hand instrument panel, any damaged switch below the switch panels of the left-hand instrument panel, any damaged (that is, sharp) edge of the support tray for the attachment cables of the switch panels below the left-hand instrument panel; correct any damage found during the inspection; and apply a layer of anti-rub (protective padding) strips to the edge of the support tray. This AD results from mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Germany. We are issuing this AD to detect, correct, and prevent chafing of the cables against the rear lip of the tray that holds the switch panels. Chafing of the electrical cables could result in smoke or fire in the cockpit.
Establishment of Area Navigation Instrument Flight Rules Terminal Transition Routes (RITTR); Jacksonville, FL
Document Number: 05-21879
Type: Rule
Date: 2005-11-02
Agency: Federal Aviation Administration, Department of Transportation
This action establishes five Area Navigation Instrument Flight Rules Terminal Transition Routes (RITTR) in the Jacksonville, FL terminal area. The FAA originally proposed to establish seven routes as part of this action, but decided not to implement routes T-206 and T- 210 at this time. RITTRs are low altitude Air Traffic Service (ATS) routes, based on area navigation (RNAV), for use by aircraft having instrument flight rules (IFR)-approved Global Positioning System (GPS)/ Global Navigation Satellite System (GNSS) equipment. The purpose of RITTR is to expedite the handling of IFR overflight traffic through busy terminal airspace areas. The FAA is taking this action to enhance safety and the efficient use of the navigable airspace in the Jacksonville, FL, terminal area.
Proposed Establishment of Restricted Area 5601F; Fort Sill, OK
Document Number: 05-21878
Type: Proposed Rule
Date: 2005-11-02
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to establish Restricted Area 5601F (R- 5601F) at Fort Sill, OK. The United States (U.S.) Army requests that the FAA take action to establish R-5601F to provide additional airspace needed to support new high angle air-to-ground training requirements for Air Force, Navy, and Marine aircraft operating over the Falcon Bombing Range. This action would also enhance Fort Sill's ability to host joint training.
Agency Information Collection Activity Under OMB Review, Request for Comments; Renewal of an Approved Information Collection Activity, Flight Engineers and Flight Navigators-FAR Part 63
Document Number: 05-21877
Type: Notice
Date: 2005-11-02
Agency: Federal Aviation Administration, Department of Transportation
49 U.S.C., 44902(a), 44702(a)(2), and 44707(1) authorize issuance of airman certificates and provide for examination and rating of flying schools. FAR 63 prescribes requirements for flight navigator certification and training course requirements for these airmen. Information collected is used to determine certification eligibility.
Agency Information Collection Activity Under OMB Review, Request for Comments; Renewal of an Approved Information Collection Activity, Training and Qualification Requirements for Check Airmen and Flight Instructors
Document Number: 05-21876
Type: Notice
Date: 2005-11-02
Agency: Federal Aviation Administration, Department of Transportation
The rule allows some experienced pilots who would otherwise qualify as flight instructors or check airmen, but who are not medically eligible to hold the requisite medical certificate, to perform flight instructor or check airmen functions in a simulator.
Airworthiness Directives; General Electric Company CF6-80E1 Series Turbofan Engines
Document Number: 05-21805
Type: Rule
Date: 2005-11-02
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for General Electric Company (GE) CF6-80E1 series turbofan engines installed on Airbus Industrie A330 series airplanes. This AD requires a check of the holding torque of the thrust reverser actuation system (TRAS) locks, and if necessary a visual inspection of the TRAS lock flexible drive shafts, within 10 flight cycles after all aborted takeoffs in which the thrust reverser was deployed. This AD results from reports of operators finding several damaged TRAS lock flexible drive shafts during inspections and checks of the drive shafts. We are issuing this AD to prevent inadvertent in-flight deployment of the thrust reverser, which can result in loss of control of the airplane.
Airworthiness Directives; Pratt & Whitney JT9D Series Turbofan Engines
Document Number: 05-21804
Type: Proposed Rule
Date: 2005-11-02
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to supersede an existing airworthiness directive (AD) for Pratt & Whitney (PW) JT9D series turbofan engines. That AD currently requires revisions to the Airworthiness Limitations Section (ALS) of the manufacturer's Instructions for Continued Airworthiness (ICA) to include required enhanced inspection of selected critical life-limited parts at each piece-part opportunity. This proposed AD would modify the JT9D series engines ALS sections of the manufacturer's manuals and an air carrier's approved continuous airworthiness maintenance program to incorporate additional inspection requirements. The mandatory inspections are needed to identify those critical rotating parts with conditions, which if allowed to continue in service, could result in uncontained failures. We are proposing this AD to prevent critical life-limited rotating engine part failure, which could result in an uncontained engine failure and damage to the airplane.
Airworthiness Directives; Honeywell International Inc., (Formerly AlliedSignal, Inc. and Textron Lycoming) ALF502L Series and ALF502R Series Turbofan Engines
Document Number: 05-21802
Type: Proposed Rule
Date: 2005-11-02
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to supersede an existing airworthiness directive (AD), AD 95-04-11, for Honeywell International Inc., (formerly AlliedSignal, Inc. and Textron Lycoming) ALF502L series and ALF502R series turbofan engines. That AD currently establishes stress rupture retirement life limits for certain third stage turbine discs used in conjunction with certain third stage turbine nozzles. This proposed AD would bring requirements forward and unchanged, from the previous AD for ALF502R series turbofan engines. Also, this proposed AD would establish new reduced stress rupture retirement life limits for certain part numbers (P/Ns) of third stage turbine disc and shaft assemblies installed in ALF502L series turbofan engines. This proposed AD would also require removing those same parts from service using a drawdown schedule. This proposed AD results from a report of failure of a third stage turbine disc and shaft assembly, leading to turbine blade release and separation of the exhaust nozzle. We are proposing this AD to prevent total loss of engine power, in-flight engine shutdown, release of turbine blades, separation of the exhaust nozzle, and possible damage to the airplane.
User Input to the Aviation Weather Technology Transfer (AWTT) Board
Document Number: 05-21792
Type: Proposed Rule
Date: 2005-11-02
Agency: Federal Aviation Administration, Department of Transportation
The FAA will hold an informal public meeting to seek aviation weather user input on convective weather products. Details: November 10, 2005; Orlando Orange County Convention Center, 9800 International Drive, Room N210A, Orlando, Florida 32819, 1 p.m. to 5 p.m. The objective of this meeting is to provide an opportunity for interested Government and commercial sector representatives who use Government- provided aviation weather information in operational decision-making to provide input on FAA's plans for implementing new convective weather products.
Reservation System for Unscheduled Arrivals at Chicago's O'Hare International Airport
Document Number: 05-21786
Type: Rule
Date: 2005-11-02
Agency: Federal Aviation Administration, Department of Transportation
This action extends the expiration date of Special Federal Aviation Regulation (SFAR) No. 105 through March 31, 2006. This action is necessary to maintain the reservation system established for unscheduled arrivals at O'Hare International Airport while the FAA completes rulemaking associated with scheduled arrivals at the airport.
Standard Instrument Approach Procedures; Miscellaneous Amendments
Document Number: 05-21578
Type: Rule
Date: 2005-11-02
Agency: Federal Aviation Administration, Department of Transportation
This amendment amends Standard Instrument Approach Procedures (SIAPs) for operations at certain airports. These regulatory actions are needed because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, addition of new obstacles, or changes in air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Flightdeck Door Monitoring and Crew Discreet Alerting Systems
Document Number: 05-21747
Type: Proposed Rule
Date: 2005-11-01
Agency: Federal Aviation Administration, Department of Transportation
This document corrects the preamble to a proposed rule published in the Federal Register on September 21, 2005, regarding flightdeck door monitoring and crew discreet alerting systems. This correction adds two vendors that sell video camera systems to the ones cited in the preamble.
Finding of No Significant Impact
Document Number: 05-21746
Type: Notice
Date: 2005-11-01
Agency: Federal Aviation Administration, Department of Transportation
On May 23, 2005, the FAA Office of Commercial Space Transportation (AST) received an application for a launch license from Space Exploration Technologies, Inc. (SpaceX) to conduct launches of its Falcon 1 launch vehicle from Omelek Island, U.S. Army Kwajalein Atoll/Ronald Reagan Ballistic Missile Test Site (USAKA/RTS). The FAA participated as a cooperating agency with the U.S. Army Space and Missile Defense Command (USASMDC) in preparation of the Environmental Assessment (EA) for the Proof-of-Principle Space Launches from Omelek Island (February 2005). The EA analyzed the environmental consequences of conducting two proof-of-principle launches of the Falcon 1 Launch Vehicle from Omelek Island, USAKA/RTS. From its independent review and consideration, the FAA has determined that the FAA's proposed action is substantially the same as the actions already analyzed in the USASMDC EA and that FAA's comments and suggestions have been satisfied (see 1506.3(c) and FAA Order 1050.1E, 518h). The FAA formally adopts the EA and hereby incorporates the analysis to support its decision on this license application. After reviewing and analyzing currently available data and information on existing conditions, project impacts, and measures to mitigate those impacts, the FAA has determined that licensing the proposed launch activities is not a Federal action that would significantly affect the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA). Therefore, the preparation of an Environmental Impact Statement (EIS) is not required and the FAA is issuing a Finding of No Significant Impact (FONSI). The FAA made this determination in accordance with all applicable environmental laws.
Establishment and Revision of Area Navigation (RNAV) Routes; Western United States
Document Number: 05-21745
Type: Rule
Date: 2005-11-01
Agency: Federal Aviation Administration, Department of Transportation
This action corrects errors in the legal description of Area Navigation (RNAV) Routes listed in a final rule published in the Federal Register on October 14, 2005 (70 FR 59990), Airspace Docket No. 05-ANM-1.
Notice of Opportunity To Participate, Criteria Requirements and Application Procedure for Participation in the Military Airport Program (MAP)
Document Number: 05-21744
Type: Notice
Date: 2005-11-01
Agency: Federal Aviation Administration, Department of Transportation
This notice announces the criteria, application procedures, and schedule to be applied by the Secretary of Transportation in designating or redesignating, and funding capital development annually for up to 15 current (joint-use) or former military airports seeking designation or redesignation to participate in the Military Airport Program (MAP). The MAP allows the Secretary to designate current (joint-use) or former military airports to receive grants from the Airport Improvement Program (AIP). The Secretary is authorized to designate an airport (other than an airport designated before August 24, 1994) only if: (1) The airport is a former military installation closed or realigned under the Title 10 U.S.C. 2687 (announcement of closures of large Department of Defense installations after September 30, 1977), or under section 201 or 2905 of the Defense Authorization Amendments and Base Closure and Realignment Acts; or (2) the airport is a military installation with both military and civil aircraft operations. The Secretary shall consider for designation only those current or former military airports, at least partly converted to civilian airports as part of the national air transportation system, that will reduce delays at airports with more than 20,000 hours of annual delays in commercial passenger aircraft takeoffs and landings, or will enhance airport and air traffic control system capacity in metropolitan areas or reduce current and projected flight delays (49 U.S.C. 47118(c)).
Airworthiness Directives; AvCraft Dornier Model 328-100 Airplanes
Document Number: 05-21697
Type: Proposed Rule
Date: 2005-11-01
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to revise an existing airworthiness directive (AD) that applies to all AvCraft Dornier Model 328-100 airplanes. The existing AD currently requires revising the Airplane Flight Manual (AFM) to provide the flightcrew with additional information regarding procedures to ensure complete pressurization of the hydraulic lines for the flaps. The existing AD also requires, for certain airplanes, modification of the flap actuators of the flight controls. This proposed AD would allow the removal of the AFM revisions after modifying the flap actuators of the flight controls. This proposed AD results from the determination that the AFM revisions are not necessary after modifying the flap actuators of the flight controls. We are proposing this AD to prevent an uncommanded retraction of the flaps during takeoff, which could result in an aborted takeoff and consequent potential for runway overrun.
Standard Instrument Approach Procedures, Weather Takeoff Minimums; Miscellaneous Amendments
Document Number: 05-21582
Type: Rule
Date: 2005-11-01
Agency: Federal Aviation Administration, Department of Transportation
This amendment establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and/or Weather Takeoff Minimums for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, addition of new obstacles, or changes in air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Airworthiness Directives; Mitsubishi Model YS-11 Airplanes, and Model YS-11A-200, YS-11A-300, YS-11A-500, and YS-11A-600 Series Airplanes
Document Number: 05-21543
Type: Rule
Date: 2005-11-01
Agency: Federal Aviation Administration, Department of Transportation
This amendment adopts a new airworthiness directive (AD), applicable to certain Mitsubishi Model YS-11 airplanes, and Model YS- 11A-200, YS-11A-300, YS-11A-500, and YS-11A-600 series airplanes. This AD requires repetitive removal of the spinner; repetitive detailed inspections of the propeller hub to detect fatigue cracking; and replacement of a propeller hub with a new propeller hub, if necessary. This action is necessary to detect and correct fatigue cracking of the propeller hub, which could cause the loss of the propeller. This action is intended to address the identified unsafe condition.
Modification of Class E Airspace; Akron, OH
Document Number: 05-21586
Type: Rule
Date: 2005-10-31
Agency: Federal Aviation Administration, Department of Transportation
This action modifies Class E airspace to Akron, OH. A Standard Instrument Approach Procedure has been developed for Wingfoot Lake Airship Operations Airport. Controlled airspace extending upward from 700 feet or more above the surface of the earth is needed to contain aircraft executing this approach. This action increases the areas of existing controlled airspace for Akron, OH.