Department of Transportation December 17, 2021 – Federal Register Recent Federal Regulation Documents
Results 1 - 14 of 14
Airworthiness Directives; Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500- 1A11 airplanes. This AD was prompted by reports of in-flight engine shutdowns (IFESs); investigation results indicated that this could be caused by high altitude climbs at higher thrust settings on engines with certain thrust ratings. This AD requires amending the existing airplane flight manual (AFM) to incorporate a new limitation and revise certain normal procedures, as specified in a Transport Canada Civil Aviation (TCCA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Petition for Exemption; Summary of Petition Received; CASS Professional Services Corp.
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion nor omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Proposed Establishment of Class E Airspace; Falmouth, MA
This action proposes to establish Class E airspace extending upward from 700 feet above the surface for Falmouth Airpark, Falmouth, MA, to accommodate area navigation (RNAV) global positioning system (GPS) standard instrument approach procedures (SIAPs) serving this airport. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area.
Proposed Amendment of Class D, Class E, and Establishment of Class E Airspace; Atlanta, GA Area
This action proposes to amend Class D airspace, Class E surface airspace, Class E airspace extending upward from 700 feet above the surface, and establish Class E Airspace Designated as an Extension to a Class D Surface Area in the Atlanta, GA area. This action would replace the Atlanta VORTAC (Very High Frequency Omnidirectional Range Collocated Tactical Air Navigation) with the term Point of Origin. This action would update several airport names and geographic coordinates. This action would also make an editorial change replacing the term Airport/Facility Directory with the term Chart Supplement in the legal descriptions of associated Class D and E airspace. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area.
Proposed Amendment of the Class E Airspace; Olney, TX
This action proposes to amend the Class E airspace at Olney, TX. The FAA is proposing this action as the result of an airspace review due to the decommissioning of the Olney non-directional beacon (NDB). The geographic coordinates of the airport would also be updated to coincide with the FAA's aeronautical database.
Agency Information Collection Activities; Approval of a New Information Collection Request; Waiver and Exemption Requirements
In accordance with the Paperwork Reduction Act of 1995, the Federal Motor Carrier Safety Administration (FMCSA) announces its plan to submit the Information Collection Request (ICR) described below to the Office of Management and Budget (OMB) for its review and approval and invites public comment. This notice invites comment on a new information collection titled ``Waiver and Exemption Requirements.'' The ICR estimates the burden applicants incur to comply with the reporting tasks required for requesting waivers and exemptions. FMCSA has not previously accounted for these burdens.
Agency Information Collection Activities; Renewal of a Currently Approved Information Collection: Motor Carrier Identification Report
In accordance with the Paperwork Reduction Act of 1995, FMCSA announces its plan to submit the Information Collection Request (ICR) described below to the Office of Management and Budget (OMB) for its review and approval and invites public comment. FMCSA requests approval to revise an ICR titled, ``Motor Carrier Identification Report,'' which is used to identify FMCSA regulated entities, help prioritize the agency's activities, aid in assessing the safety outcomes of those activities, and for statistical purposes. This ICR is necessary to ensure regulated entities are registered with the DOT.
Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all De Havilland Aircraft of Canada Limited Model DHC-8-401 and -402 airplanes. This proposed AD was prompted by reports of bleed air leaks in the wing box area and failure of the leak detection shroud. This proposed AD would require removing and inspecting the affected V-band coupling and check valve seals, doing corrective actions if necessary, and replacing the coupling and seals with a redesigned assembly. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD- 500-1A11 airplanes. This proposed AD was prompted by a report that some tie-rod assemblies may have been over-tightened during the installation of interior monuments (such as galleys, lavatories, and forward stowage or wardrobes). This proposed AD would require adjusting the tie-rod assemblies, as specified in a Transport Canada Civil Aviation (TCCA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A350-941 and -1041 airplanes. This proposed AD was prompted by a report that in the event of a specific discrete wire failure, the landing gear extension and retraction system (LGERS) may not be able to complete landing gear retraction when commanded by moving the landing gear lever to the UP position. This proposed AD would require revising the operator's existing FAA-approved minimum equipment list (MEL) for the landing gear extension and retraction system, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A300 B2-1C, B2K-3C, B2-203, B4-2C, B4-103, and B4-203 airplanes. This proposed AD was prompted by a determination that new or more restrictive airworthiness limitations related to pylon maintenance are necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations for pylon maintenance, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Noise Exposure Map Notice; Witham Field/Martin County Airport, Stuart, Florida
The Federal Aviation Administration (FAA) announces its determination that the Noise Exposure Maps submitted by the Martin County Board of County Commissioners (Airport Sponsor) for Witham Field/Martin County Airport under the provisions of the Aviation Safety and Noise Abatement Act and are in compliance with applicable requirements.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.