Department of Transportation June 30, 2021 – Federal Register Recent Federal Regulation Documents
Results 1 - 18 of 18
Notice of Intent To Rule on Disposal of Aeronautical Property at Cincinnati/Northern Kentucky International Airport, Hebron, KY (CVG)
The Federal Aviation Administration is requesting public comment on a request by Kenton County Airport Board, to release of land (4.44 acres) at Cincinnati/Northern Kentucky International Airport from federal obligations.
Fiscal Year 2021 Competitive Funding Opportunity: Areas of Persistent Poverty Program
Federal Transit Administration (FTA), U.S. Department of Transportation (DOT).
Petition for Exemption; Summary of Petition Received; K&S Aviation Services, Inc.
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, FAA's exemption process. Neither publication of this notice nor the inclusion nor omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; United States Marine Corps
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; Sikorsky Aircraft Corporation
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; American Airlines, Inc.
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, FAA's exemption process. Neither publication of this notice nor the inclusion nor omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This proposed AD was prompted by a report that during a fleet sampling inspection, cracks were found on the inner cylinder pivot pins of the left and right main landing gear (MLG) on one of the airplanes. This proposed AD would require repetitive lubrications of the left and right MLG truck beam and inner cylinder pivot joint, reviewing the maintenance program documentation to verify certain lubrication tasks are incorporated, doing repetitive inspections of the MLG inner cylinder pivot pins and inner cylinder bushings of the MLG truck beam and inner cylinder joint for any friction, heat damage, excessive wear, cracking and smearing of bushing material, and applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2019-03-26, which applies to certain The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. AD 2019-03-26 requires modifying the passenger service units (PSUs) and life vest panels by replacing the existing inboard lanyard and installing two new lanyards on the outboard edge of the PSUs and life vest panels; measuring the distance between the hooks of the torsion spring of the lanyard assembly; replacing discrepant lanyard assemblies; and re- identifying serviceable lanyard assemblies. Since the FAA issued AD 2019-03-26, it has been determined that certain airplanes are listed in the wrong configuration and certain PSUs have not been correctly re- identified. This proposed AD would retain the requirements of AD 2019- 03-26, and, for certain airplanes, would require an inspection to determine if the re-identified PSU part number is correct, and further re-identification if necessary. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2005-05-18, which applies to certain The Boeing Company Model 737-600, -700, -700C, -800, and -900 series airplanes. AD 2005-05-18 requires repetitive inspections for cracking of the webs of the aft pressure bulkhead at a certain body station, and corrective action if necessary. Since the FAA issued AD 2005-05-18, cracking was found in that inspection area on airplanes not identified in the applicability of AD 2005-05-18. This proposed AD would retain the requirements of AD 2005- 05-18, revise the applicability to include additional airplanes, and add an inspection for existing repairs on the newly added airplanes. The FAA is proposing this AD to address the unsafe condition on these products.
Amendment of Class E Airspace; Dillon, MT
This action modifies the Class E airspace extending upward from 1,200 feet above the surface at Dillon Airport, Dillon, MT. The airspace is designed to support instrument flight rules (IFR) operations at the airport.
Extension of Compliance Date for Entry-Level Driver Training
FMCSA finalizes its February 4, 2020 interim final rule (interim rule), which revised a December 8, 2016, final rule, ``Minimum Training Requirements for Entry-Level Commercial Motor Vehicle Operators'' (ELDT final rule). This action finalizes the extension of the compliance date for the ELDT final rule from February 7, 2020, to February 7, 2022. This action provides FMCSA additional time to complete development of the Training Provider Registry (TPR) and provides State Driver Licensing Agencies (SDLAs) time to modify their information technology (IT) systems and procedures, as necessary, to accommodate their receipt of driver-specific ELDT data from the TPR.
Hours of Service (HOS) of Drivers; Application for Renewal of American Pyrotechnics Association Exemptions From the 14-Hour Rule and the Electronic Logging Device Rule During Independence Day Celebrations
FMCSA announces its decision to grant, in part, the application of the American Pyrotechnics Association (APA) for renewal of exemptions from certain hours of service (HOS) regulations that expired on July 8, 2020. The request is being made on behalf of 60 APA member companies. The exemptions will allow drivers for these companies to exclude off-duty and sleeper berth time of any length from the calculation of the 14-hour limit and to use paper records of duty status (RODS) in lieu of electronic logging devices (ELD) during the 2021 Independence Day period. FMCSA has analyzed the application for exemptions and the public comments and has determined that the exemptions, subject to the terms and conditions imposed, will likely achieve a level of safety that is equivalent to, or greater than, the level that would be achieved absent such exemptions.
Establishment of Class E Airspace; Great Falls, MT
This action establishes Class E domestic en route airspace extending upward from 1,200 feet above the surface at Great Falls, MT. This airspace facilitates vectoring of Instrument Flight Rules (IFR) aircraft and it properly contains IFR aircraft operating on direct routes under the control of Salt Lake City Air Route Traffic Control Center (ARTCC).
Proposed Establishment of Class E Airspace; Mesa Del Rey Airport, CA
This action proposes to establish Class E airspace extending upward from 700 feet above the surface at Mesa Del Rey Airport, King City, CA. The establishment of Class E airspace will support the airport's transition from visual flight rules (VFR) to instrument flight rules (IFR) operations. This action would ensure the safety and management of IFR operations at the airport.
Airworthiness Directives; ATR-GIE Avions de Transport Régional Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain ATR-GIE Avions de Transport R[eacute]gional Model ATR42-300, - 320, and -500 airplanes; and all Model ATR72-101, -102, -201, -202, - 211, -212, and -212A airplanes. This AD was prompted by reports of defective seat tracks. This AD requires a detailed visual inspection of each affected part for deficiencies (sealant blockage and out of tolerance ligaments), and depending on findings, accomplishment of applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A330-200, A330-200 Freighter, A330-300, A340-200, and A340-300 series airplanes. This AD was prompted by a report that the auxiliary power unit (APU) aft fuel pump printed circuit board (PCB) varnish had deteriorated; the varnish is one of the layers of protection against development of an ignition source. This AD requires replacing each affected APU aft fuel pump, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.