Department of Transportation September 2019 – Federal Register Recent Federal Regulation Documents

This amendment adopts miscellaneous amendments to the required IFR (instrument flight rules) altitudes and changeover points for certain Federal airways, jet routes, or direct routes for which a minimum or maximum en route authorized IFR altitude is prescribed. This regulatory action is needed because of changes occurring in the National Airspace System. These changes are designed to provide for the safe and efficient use of the navigable airspace under instrument conditions in the affected areas.

This notice announces action taken by FHWA and other Federal agencies that are final. The actions relate to the Van Wyck Expressway Capacity and Access Improvements to John F. Kennedy (JFK) Airport Project located in Queens County, New York.

The FAA is correcting an airworthiness directive (AD) that published in the Federal Register. That AD applies to certain The Boeing Company Model 737-100, 737-200, 737-200C, 737-300, 737-400, and 737-500 series airplanes. As published, a paragraph reference specified in the regulatory text is incorrect. This document corrects that error. In all other respects, the original document remains the same.

FCA US LLC (f/k/a Chrysler Group LLC) (``FCA US''), has determined that certain MY 2014-2019 Fiat 500 motor vehicles do not comply with Federal Motor Vehicle Safety Standard (FMVSS) No. 138, Tire Pressure Monitoring Systems. FCA US filed a noncompliance report dated April 11, 2019 and subsequently petitioned NHTSA on May 3, 2019, for a decision that the subject noncompliance is inconsequential as it relates to motor vehicle safety. This document announces receipt of FCA US's petition.

The FAA is superseding Airworthiness Directive (AD) 2019-06- 09, which applied to certain Airbus SAS Model A350-941 airplanes. AD 2019-06-09 required repetitive tightness checks of the baby bassinet inserts installed on stowages and partitions and, depending on findings, accomplishment of applicable corrective actions, as specified in a European Aviation Safety Agency (EASA) AD, which was incorporated by reference. This new AD continues to require repetitive tightness checks of the baby bassinet inserts installed on stowages and partitions and, depending on findings, accomplishment of applicable corrective actions, and also requires modification of the baby bassinet inserts, which constitutes terminating action for the repetitive tightness checks; as specified in an EASA AD, which is incorporated by reference. This AD was prompted by reports that baby bassinet inserts installed on airplane stowages and partitions were found loose because a self-securing fixation device (Loctite) had not been applied. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is withdrawing the NPRM published in the Federal Register on August 14, 2019, to amend Class E airspace extending upward from 700 feet above the surface at Marshalltown Municipal Airport, Marshalltown, IA. Upon further consideration, the FAA has determined that an operational requirement for the airspace still exists; therefore, withdrawal of the proposed rule is warranted

FMCSA amends its hours-of-service (HOS) requirements applicable to drivers of property-carrying commercial motor vehicles (CMVs) to remove provisions requiring that a 34-hour restart include two periods between 1 a.m. and 5 a.m. and limiting use of a restart to once every 168 hoursprovisions that were promulgated in December 2011. In a series of Appropriations Acts, Congress suspended these provisions, pending completion of a naturalistic study comparing the effects of the restart provisions in effect under the 2011 rule versus provisions in effect prior to the 2011 rule's compliance date. The 2017 naturalistic study found no statistically significant benefits from the restart rule. Pursuant to a 2017 Appropriations Act, the 2011 restart rules are therefore void by operation of law. Although not in effect, the provisions remain in the Code of Federal Regulations (CFR), which could cause confusion for some stakeholders.

The FAA proposes to supersede Airworthiness Directive (AD) 2019-03-19, which applies to all Saab AB, Saab Aeronautics Model SAAB 2000 airplanes. AD 2019-03-19 requires a functional check of certain fuel probes, and replacement with a serviceable part if necessary. Since the FAA issued AD 2019-03-19, the agency has determined the definition of a ``serviceable part'' must be revised. This proposed AD would retain a functional check of certain fuel probes, and replacement with a serviceable part if necessary. The FAA is proposing this AD to address the unsafe condition on these products.

In accordance with the Paperwork Reduction Act of 1995, FMCSA announces its plan to submit the information collection request (ICR) described below to the Office of Management and Budget (OMB) for its review and approval and invites public comment. FMCSA requests approval to renew the ICR titled ``Unified Registration System, FMCSA Registration/Updates,'' OMB Control No. 2126-0051. This ICR applies to new registrants seeking initial operating authority from FMCSA. New registrants seeking operating authority must use online Form MCSA-1, accessible via the Unified Registration System (URS).

This action proposes to amend the Class D airspace at Joe Williams NOLF, Meridian, MS; Key Field, Meridian, MS; and NAS Meridian/ McCain Field, Meridian, MS; the Class E airspace area designated as an extension to Class D airspace at Key Field; and the Class E airspace extending upward from 700 feet above the surface at Key Field, Joe Williams NOLF, and NAS Meridian/McCain Field. The FAA is proposing this action as the result of the decommissioning of the Kewanee VHF omnidirectional range (VOR) navigation aid, which provided navigation information for the instrument procedures at these airports, as part of the VOR Minimum Operational Network (MON) Program. The names and geographic coordinates of NAS Meridian/McCain Field and Joe Williams NOLF, and the geographic coordinates of Key Field would also be updated to coincide with the FAA's aeronautical database. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at these airports.

The FAA proposes to supersede Airworthiness Directives (ADs) 2016-01-16, 2017-19-03, and 2018-19-05, which apply to Dassault Aviation Model MYSTERE-FALCON 900 airplanes. Those ADs require revising the maintenance or inspection program, as applicable, to incorporate new or more restrictive maintenance requirements and/or airworthiness limitations. Since AD 2018-19-05 was issued, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is proposing this AD to address the unsafe condition on these products.

This action modifies the Class E airspace extending upward from 700 feet above the surface at Ashland Regional Airport, Ashland, KY. This action is due to an airspace review caused the revision of the instrument procedures at the airport, which require additional airspace. The name of the airport are also being updated to coincide with the FAA's aeronautical database.

The FHWA, on behalf of Caltrans, is issuing this notice to announce actions taken by Caltrans that are final. The actions relate to a proposed extension of El Segundo from Allied Way to Nash Street in the County of Los Angeles, State of California. Those actions grant licenses, permits, and approvals for the project.

The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A330-200 Freighter, -200, and -300 series airplanes; and certain Airbus SAS Model A340-200, -300, -500, and -600 series airplanes. This AD was prompted by a determination that certain wing slat tracks that were inadvertently indicated as eligible for installation on all Model A330 and A340 series airplanes are unable to sustain the ultimate loads relative to the weight variant of certain airplane configurations. This AD requires identifying affected parts, inspecting for and repairing cracks, and replacing affected parts with serviceable parts, as specified in a European Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

This action establishes Class D airspace and Class E airspace designated as surface area, at Beech Factory Airport, Wichita, KS. This action is for the safety and management of instrument flight rules (IFR) operations at the airport.

The FAA proposes to adopt a new airworthiness directive (AD) for all Pratt & Whitney (PW) PW1519G, PW1521G, PW1521GA, PW1524G, PW1525G, PW1521G-3, PW1524G-3, PW1525G-3, PW1919G, PW1921G, PW1922G, PW1923G, and PW1923G-A model turbofan engines. This proposed AD was prompted by reports of in-flight shutdowns due to oil leaking from the connection between the LP10 oil supply tube and the fuel oil cooler (FOC). This proposed AD would require initial and repetitive gap inspections of the LP10 oil supply tube and the FOC and, if a gap is found, replacement of these parts. This proposed AD further requires removal of these parts at the next engine shop visit. The FAA is proposing an AD to address the unsafe condition on these products.

The FAA proposes to adopt a new airworthiness directive (AD) for certain 328 Support Services GmbH Model 328-100 airplanes. This proposed AD was prompted by a report of missing rivets on landing flap support arm 2. This proposed AD would require an inspection of the landing flap support arms for missing rivets and corrective actions if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.

This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

This notice announces a meeting of the ARAC.

FMCSA announces its decision to renew exemptions for 95 individuals from the vision requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) for interstate commercial motor vehicle (CMV) drivers. The exemptions enable these individuals to continue to operate CMVs in interstate commerce without meeting the vision requirements in one eye.

FMCSA announces receipt of applications from ten individuals for an exemption from the vision requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) to operate a commercial motor vehicle (CMV) in interstate commerce. If granted, the exemptions will enable these individuals to operate CMVs in interstate commerce without meeting the vision requirement in one eye.

FMCSA announces its decision to renew exemptions for 74 individuals from the vision requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) for interstate commercial motor vehicle (CMV) drivers. The exemptions enable these individuals to continue to operate CMVs in interstate commerce without meeting the vision requirement in one eye.