Department of Transportation August 28, 2019 – Federal Register Recent Federal Regulation Documents
Results 1 - 14 of 14
Motor Carrier Safety Advisory Committee (MCSAC); Public Meeting
FMCSA announces a meeting of the MCSAC.
Qualification of Drivers; Exemption Applications; Hearing
FMCSA announces receipt of applications from 29 individuals for an exemption from the hearing requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) to operate a commercial motor vehicle (CMV) in interstate commerce. If granted, the exemptions would enable these hard of hearing and deaf individuals to operate CMVs in interstate commerce.
Qualification of Drivers; Exemption Applications; Hearing
FMCSA announces its decision to renew exemptions for four individuals from the hearing requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) for interstate commercial motor vehicle (CMV) drivers. The exemptions enable these hard of hearing and deaf individuals to continue to operate CMVs in interstate commerce.
Qualification of Drivers; Exemption Applications; Hearing
FMCSA announces its decision to renew exemptions for eleven individuals from the hearing requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) for interstate commercial motor vehicle (CMV) drivers. The exemptions enable these hard of hearing and deaf individuals to continue to operate CMVs in interstate commerce.
Qualification of Drivers; Exemption Applications; Epilepsy and Seizure Disorders
FMCSA announces receipt of applications from five individuals for an exemption from the prohibition in the Federal Motor Carrier Safety Regulations (FMCSRs) against persons with a clinical diagnosis of epilepsy or any other condition that is likely to cause a loss of consciousness or any loss of ability to control a commercial motor vehicle (CMV) to drive in interstate commerce. If granted, the exemptions would enable these individuals who have had one or more seizures and are taking anti-seizure medication to operate CMVs in interstate commerce.
Qualification of Drivers; Exemption Applications; Hearing
FMCSA announces its decision to exempt 27 individuals from the hearing requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) to operate a commercial motor vehicle (CMV) in interstate commerce. The exemptions enable these hard of hearing and deaf individuals to operate CMVs in interstate commerce.
Hours of Service of Drivers: Transco, Inc.; Application for Exemption
FMCSA announces its decision to grant Transco, Inc.'s (Transco) request for exemption from the 30-minute rest break provision of the Agency's hours-of-service (HOS) regulations for commercial motor vehicle (CMV) drivers. The exemption will enable Transco's drivers to comply with the 30-minute break requirement while performing on-duty not-driving tasks. The exemption applies to all Transco drivers in its grocery division who make wholesale deliveries to grocery and convenience stores.
Notice of National Grain Car Council Meeting
Notice is hereby given of a meeting of the National Grain Car Council (NGCC), pursuant to the Federal Advisory Committee Act.
Pirelli Tire, LLC, Receipt of Petition for Decision of Inconsequential Noncompliance
Pirelli Tire, LLC (Pirelli), has determined that certain Pirelli P Zero replacement tires do not comply with Federal Motor Vehicle Safety Standard (FMVSS) No. 139, New Pneumatic Radial Tires for Light Vehicles. Pirelli filed a noncompliance report dated November 19, 2018, and subsequently petitioned NHTSA on December 14, 2018, for a decision that the subject noncompliance is inconsequential as it relates to motor vehicle safety. This notice announces receipt of Pirelli's petition.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2016-07- 22, which applied to all Airbus SAS Model A300 B4-600, B4-600R, and F4- 600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes); and Model A310 series airplanes. AD 2016-07-22 required modifying the electrical routing installation at the right-hand (RH) and left-hand (LH) wings to achieve a minimum distance between wiring bundles and surrounding structures. This new AD retains the requirements of AD 2016-07-22 and, for certain airplanes, adds a requirement to further modify the electrical installations in both wings, as specified in a European Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD was prompted by reports of missing installation information for certain airplanes. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is withdrawing a notice of proposed rulemaking (NPRM) that proposed to adopt a new airworthiness directive (AD) that would have applied to certain Bombardier, Inc., Model DHC-8-400 series airplanes. The NPRM was prompted by reports of wear on fuel couplings, bonding springs, and sleeves as well as fuel tube end ferrules and fuel component end ferrules. The NPRM would have required repetitive inspections of the existing clamshell coupling bonding wires, fuel couplings, and associated sleeves for certain criteria, and replacement as necessary. The NPRM would also have required repetitive inspections of the fuel tube end ferrules, fuel component end ferrules, and ferrule o-ring flanges for damage and wear, and rework as necessary. Since issuance of the NPRM, the FAA determined that more restrictive airworthiness limitations are also necessary, that an optional terminating modification is appropriate for certain airplanes, and that the NPRM does not adequately address the identified unsafe condition. Accordingly, the NPRM is withdrawn.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2018-20- 06, which applied to certain Airbus SAS Model A300 F4-600R series airplanes. AD 2018-20-06 required repetitive high frequency eddy current (HFEC) inspections of the aft lower deck cargo door (LDCD) frame forks; a one-time check of the LDCD clearances; a one-time detailed visual inspection of hooks, eccentric bushes, and x-stops; and corrective actions if necessary. This AD retains the actions of AD 2018-20-06 and requires new compliance times, depending on frame fork configuration. This AD was prompted by a report of two adjacent frame forks that were found cracked on the aft LDCD of two airplanes during scheduled maintenance, and a determination that certain compliance times need to be revised. The FAA is issuing this AD to address the unsafe condition on these products.
Agency Information Collection Activities; Notice and Request for Comment; Drivers' Use of Camera-Based Rear Visibility Systems Versus Traditional Mirrors
The National Highway Traffic Safety Administration (NHTSA) announces our intention to request the Office of Management and Budget's (OMB) approval of a proposed collection of certain information by the Agency. Before a Federal agency can collect certain information from the public, it must receive approval from OMB. Procedures established under the Paperwork Reduction Act of 1995 (the PRA) require Federal agencies to publish a notice in the Federal Register concerning each proposed collection of information and to allow 60 days for public comment in response to the notice. The proposed collection of information supports research addressing safety-related aspects of drivers' use of camera-based rear visibility systems intended to serve as a replacement for traditional outside rearview mirrors.
Airworthiness Directives; Learjet, Inc. Airplanes
The FAA is superseding Airworthiness Directive (AD) 2017-11-09 for certain Learjet, Inc. (Learjet), Model 60 airplanes. AD 2017-11-09 required a one-time fluorescent dye penetrant inspection of the fuselage skin for corrosion, additional related inspections and corrective actions as necessary, and reporting the inspection results to the FAA. This AD clarifies the compliance time for the inspection and corrects an error in the inspection area of the fuselage skin. This AD was prompted by the identification of an error in the fluorescent dye penetrant inspection of the fuselage skin and an ambiguity in the compliance time for the fluorescent dye penetrant inspection. The FAA is issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.