Department of Transportation March 5, 2019 – Federal Register Recent Federal Regulation Documents

Environmental Impact Statement: Little Cottonwood Canyon, Salt Lake County, Utah
Document Number: 2019-03957
Type: Notice
Date: 2019-03-05
Agency: Federal Highway Administration, Department of Transportation
FHWA on behalf of the Utah Department of Transportation (UDOT) published a Notice of Intent (NOI) in the Federal Register on March 9, 2018. FHWA on behalf of UDOT is issuing this notice to advise the public that UDOT intends to revise the scope of the analysis of the Little Cottonwood Canyon project based on new information collected from the public and agencies during the scoping process and development of the project need.
Proposed Establishment of Restricted Area R-7202; Guam, GU
Document Number: 2019-03931
Type: Proposed Rule
Date: 2019-03-05
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to establish restricted area R-7202 on the island of Guam, GU. With the relocation of United States Marine Corps (USMC) forces from Okinawa, Japan to Guam, there is a requirement to establish a safe and effective area for live-fire small arms weapons training. The proposed restricted area would provide the protection required to contain these hazardous activities and the weapons safety footprints for the ordnance to be used within the proposed airspace. No hazardous aviation activities will be authorized in this area.
Deepwater Port License Application: Texas COLT LLC (Texas COLT)
Document Number: 2019-03902
Type: Notice
Date: 2019-03-05
Agency: Maritime Administration, Department of Transportation
The Maritime Administration (MARAD) and the U.S. Coast Guard (USCG) announce they have received an application for the licensing of a deepwater port and that the application contains information sufficient to commence processing. This notice summarizes the applicant's plans and the procedures that will be followed in considering the application.
Proposed Establishment of Class E Airspace, Boulder City, NV
Document Number: 2019-03838
Type: Proposed Rule
Date: 2019-03-05
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to establish Class E airspace extending upward from 700 feet above the surface at Boulder City Muni Airport, NV. This action would support the development of Instrument Flight Rules (IFR) operations under standard instrument approach and departure procedures at the airport, for the safety and management of aircraft within the National Airspace System.
Modification of Class E Airspace for the Following Alaska Towns; Hooper Bay, AK; Kaltag, AK; King Salmon, AK; Kodiak, AK; Manokotak, AK; and Middleton Island, AK
Document Number: 2019-03837
Type: Rule
Date: 2019-03-05
Agency: Federal Aviation Administration, Department of Transportation
This action modifies Class E airspace extending upward from 1,200 feet above the surface at Hooper Bay Airport, AK; Kaltag Airport, AK; King Salmon Airport, AK; Kodiak Airport, AK; Manokotak Airport, AK; and Middleton Island Airport, AK. This action adds exclusionary language to the legal descriptions of these airports to exclude Class E airspace extending beyond 12 miles from the shoreline and ensures the safety and management of aircraft within the National Airspace System. Also, an editorial change is made in the airspace designation for King Salmon Airport. This action also corrects an error in the coordinates of Kodiak Airport and the Middleton Island VOR/DME.
Proposed Modification of Class E Airspace, Hawaiian Islands, HI
Document Number: 2019-03835
Type: Proposed Rule
Date: 2019-03-05
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to modify the Hawaiian Islands Class E domestic airspace extending upward from 1,200 feet and 5,500 feet above the surface of the earth by removing that portion that extends beyond the Territorial Sea. This action would support the operation of Instrument Flight Rules (IFR) under standard instrument approach and departure procedures in the Hawaiian Islands, for the safety and management of aircraft within the National Airspace System.
Airworthiness Directives; Airbus SAS Airplanes
Document Number: 2019-03830
Type: Proposed Rule
Date: 2019-03-05
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Airbus SAS Model A318, A319, A320, and A321 series airplanes. This proposed AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive fuel airworthiness limitations. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Dassault Aviation Airplanes
Document Number: 2019-03723
Type: Rule
Date: 2019-03-05
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all Dassault Aviation Model Falcon 10 airplanes. This AD was prompted by a report indicating that certain wing anti-ice outboard flexible hoses were found damaged, likely resulting from the installation process. This AD requires repetitive detailed inspections of certain wing anti- ice outboard flexible hoses, and replacement of certain wing anti-ice outboard flexible hoses, as specified in an European Aviation Safety Agency (EASA) Emergency AD, which is incorporated by reference. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG TAY 650-15 and TAY 651-54 Turbofan Engines
Document Number: 2019-03642
Type: Proposed Rule
Date: 2019-03-05
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG (RRD) TAY 650-15 and TAY 651-54 turbofan engines with low-pressure compressor (LPC) fan blade module M01300AA or M01300AB, installed. This proposed AD was prompted by reports of LPC fan blade retention lug fractures on engines with a high number of dry-film lubrication (DFL) treatments. This proposed AD would require determining the number of DFL treatments applied on each LPC fan blade, and removing from service and replacing the affected LPC fan blades if the DFL treatment limit is exceeded. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
Document Number: 2019-03414
Type: Rule
Date: 2019-03-05
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all Airbus SAS Model A318-111, -112, -121, and -122 airplanes; Model A319- 111, -112, -113, -114, -115, -131, -132, and -133 airplanes; and Model A320-211, -212, -214, -216, -231, -232, and -233 airplanes. This AD was prompted by reports of cracks that were found after improperly performed magnetic particle inspections of the main landing gear (MLG) sliding tubes were done. This AD requires repetitive general visual inspections of the affected MLG sliding tubes for cracks and replacement if necessary. We are issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.