Department of Transportation February 2018 – Federal Register Recent Federal Regulation Documents
Results 151 - 200 of 235
Request for Comments on the Renewal of a Previously Approved Information Collection: Determination of Fair and Reasonable Rates for the Carriage of Agricultural Cargoes on U.S. Commercial Vessels-46 CFR
In compliance with the Paperwork Reduction Act of 1995, this notice announces that the Information Collection Request (ICR) abstracted below is being forwarded to the Office of Management and Budget (OMB) for review and comments. The information collection is used by MARAD in determining Fair & Reasonable rates for the carriage of bulk and packaged agriculture preference cargoes on U.S.-flag commercial vessels. A Federal Register Notice with a 60-day comment period soliciting comments on the following information collection was published on November 14, 2017 (Federal Register 52771, Vol. 82, No. 218).
Request for Comments on the Renewal of a Previously Approved Information Collection: Application for Construction Reserve Fund and Annual Statements (CRF)
The Maritime Administration (MARAD) invites public comments on our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The information to be collected is required in order for MARAD to determine whether the applicant is qualified for the benefits of the CRF program. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed
The Federal Aviation Administration is seeking approval from the Office of Management and Budget (OMB) for a renewal of the existing Information Collection 2120-0768. As required by the Paperwork Reduction Act of 1995 (PRA), the purpose of this notice is to allow 60 days for public comment. The FAA proposes collecting information related to requests to operate Unmanned Aircraft Systems (UAS) in controlled airspace pursuant to 14 CFR part 107 (``part 107''). FAA will use the collected information to make determinations whether to authorize or deny the requested operation of UAS in controlled airspace. The proposed information collection is necessary to issue such authorizations or denials consistent with the FAA's mandate to ensure safe and efficient use of national airspace. In addition, FAA proposes collecting information related to requests for waiver from the waivable provisions of 14 CFR part 107. The proposed information collection is necessary to determine whether the proposed operation is eligible for waiver consistent with the FAA's mandate to ensure safe and efficient use of national airspace.
Requested Administrative Waiver of the Coastwise Trade Laws: Vessel WINSOME RIDE; Invitation for Public Comments
The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.
Requested Administrative Waiver of the Coastwise Trade Laws: Vessel MAYAN MYSTRESS; Invitation for Public Comments
The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.
Requested Administrative Waiver of the Coastwise Trade Laws: Vessel DELA; Invitation for Public Comments
The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.
Requested Administrative Waiver of the Coastwise Trade Laws: Vessel ANYWHERE; Invitation for Public Comments
The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.
Airworthiness Directives; Gulfstream Aerospace Corporation Airplanes
We propose to supersede Airworthiness Directive (AD) 2015-24- 06, which applies to certain Gulfstream Aerospace Corporation Model GVI airplanes. AD 2015-24-06 requires repetitive breakaway torque checks and torqueing of the main landing gear (MLG) brake inlet self-sealing couplings and inserting a dispatch and takeoff limitation to the Limitations section of the airplane flight manual. Since we issued AD 2015-24-06, a modification of the MLG and brake assembly has been developed that when incorporated would terminate the need for the repetitive actions of AD 2015-24-06. This proposed AD would require modifying the MLG and brake assembly. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; DG Flugzeugbau GmbH Gliders
We propose to supersede Airworthiness Directive (AD) 2017-11- 03 for DG Flugzeugbau GmbH Model DG-500MB gliders that are equipped with a Solo 2625 02 engine modified with a fuel injection system following the instructions of Solo Kleinmoteren GmbH Technische Mitteilung (TM)/Service Bulletin (SB) 4600-3 ``Fuel Injection System'' and identified as Solo 2625 02i. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as failure of the connecting rod bearing resulting from too much load on the rod bearings from the engine control unit. This proposed AD adds DG Flugzeugbau GmbH Model DG-1000M gliders equipped with Solo 2625 02i engines to the applicability. We are issuing this proposed AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines
We propose to adopt a new airworthiness directive (AD) for certain Rolls-Royce Deutschland Ltd & Co KG (RRD) BR700-710A2-20 and BR700-710C4-11 turbofan engines. This proposed AD was prompted by reports of deterioration of the intumescent heat resistant paint system on the electronic engine controller (EEC) firebox assembly that was found to be beyond acceptable limits. This proposed AD would require replacement of affected EEC firebox assembly parts with improved parts, which have a more durable paint system. We are proposing this AD to address the unsafe condition on these products.
Proposed Revocation of Class E Airspace; Seven Springs, PA, and Somerset, PA
This action proposes to remove Class E airspace at Seven Springs, PA, as Seven Springs Borough Airport has been abandoned, and controlled airspace is no longer required. This proposal would also remove reference to the Seven Springs, PA, Class E airspace area from the Somerset County Airport, Somerset, PA, description, and update the geographic coordinates of Somerset County Airport to coincide with the FAA's database. This action would enhance the safety and management of controlled airspace within the national airspace system.
Proposed Amendment of Class D Airspace and Class E Airspace; Greenwood, MS
This action proposes to amend Class D airspace, and Class E surface area airspace at Greenwood-Leflore Airport, Greenwood, MS, by making an editorial change to the legal descriptions replacing ``Airport-Facility Directory'' with the term ``Chart Supplement.'' This proposal also would remove the part-time Notice to Airmen (NOTAM) status from Class E airspace designated as an extension. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at the airport. This action also would update the geographic coordinates of the airport in the Class designations noted in this proposal to coincide with the FAA's aeronautical database.
Airworthiness Directives; Airbus Airplanes
We are adopting a new airworthiness directive (AD) for certain Airbus Model A318 series airplanes; Model A319 series airplanes; Model A320-211, -212, -214, -231, -232, and -233 airplanes; and Model A321- 111, -112, -131, -211, -212, -213, -231, and -232 airplanes. This AD was prompted by reports of fatigue damage in the structure for the door stop fittings on certain fuselage frames (FR). This AD requires repetitive rototest inspections for cracking of the fastener holes in certain door stop fittings, and repair if necessary. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 757-300 series airplanes. This AD was prompted by reports of scribe line damage on fuselage skin. This AD requires detailed inspections of fuselage skin for the presence of scribe lines, and applicable on-condition actions. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc. Airplanes
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2C10 (Regional Jet Series 700, 701, & 702) airplanes; Model CL-600-2D15 (Regional Jet Series 705) airplanes; Model CL-600-2D24 (Regional Jet Series 900) airplanes; and Model CL- 600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by a report of rudder yoke components that had not been properly inspected at the supplier. This AD requires replacement of the left and right rudder yoke assemblies. We are issuing this AD to address the unsafe condition on these products.
Notice of Receipt of Petition for Decision That Nonconforming Model Year 2017 UKANG FT-200 Trailers Are Eligible for Importation
This document announces receipt by NHTSA of a petition for a decision that model year (MY) 2017 UKANG FT-200 trailers that were not originally manufactured to comply with all applicable Federal Motor Vehicle Safety Standards (FMVSS) are eligible for importation into the United States because they have safety features that comply with, or are capable of being altered to comply with, all such standards.
Notice of Receipt of Petition for Decision That Nonconforming Model Year 2006 Penman Lightweight GS Cargo Trailers Are Eligible for Importation
This document announces receipt by NHTSA of a petition for a decision that model year (MY) 2006 Penman Lightweight GS cargo trailers that were not originally manufactured to comply with all applicable Federal Motor Vehicle Safety Standards (FMVSS) are eligible for importation into the United States because they have safety features that comply with, or are capable of being altered to comply with, all such standards.
Notice of Final Federal Agency Actions of Proposed Highway/Interchange Improvement in California; Statute of Limitations on Claims
The FHWA, on behalf of Caltrans, is issuing this notice to announce actions taken by Caltrans, that are final. The actions relate to the proposed highway project, Niles Canyon Safety Improvements Project on State Route 84 (SR-84) between the City of Fremont and the town of Sunol in southern Alameda County, State of California. Those actions grant licenses, permits, and approvals for the project.
Environmental Impact Statement: I-80/I-215 Parley's Interchange, Salt Lake County, Utah
FHWA, on behalf of the Utah Department of Transportation (UDOT), is issuing this notice to advise the public that an Environmental Impact Statement (EIS) will be prepared for proposed transportation improvements to the I-80/I-215 Parleys Interchange in Salt Lake County, Utah.
Rescinding the Notice of Intent for an Environmental Impact Statement (EIS): 14th Street Bridge Corridor, Arlington County, Virginia and Washington, DC
The FHWA is issuing this notice to advise the public that the Notice of Intent (NOI) for the preparation of an Environmental Impact Statement to study ways to reduce congestion, enhance safety, and improve traffic operation in the 14th Street Bridge Corridor (Interstate 395) is being rescinded. The NOI was published in the Federal Register on July 18, 2006. A draft EIS was released in January 2012. This rescission is based on a lack of available funding for the full corridor proposals and has led to identification of numerous individual projects of independent utility.
Rescinding the Notice of Intent for an Environmental Impact Statement (EIS): Manassas National Battlefield Park Bypass, Loudon, Fairfax, Fauquier and Prince William Counties, VA
The FHWA is issuing this notice to advise the public that the Notice of Intent (NOI) for the preparation of an EIS to identify and study alternative means of transportation for traffic currently using the two main public roadways (VA Routes 29 and 234) running through the Manassas National Battlefield Park is being rescinded. The NOI was published in the Federal Register on November 1, 2001. A draft EIS was released in January 2005. This rescission is based on a lack of available funding for the proposed new road alignments proposed by this project as well as lack of funding and planning approval for the Bi- County Parkway.
Aviation Rulemaking Advisory Committee; Meeting
The FAA is issuing this notice to advise the public of a meeting of the ARAC.
Airworthiness Directives; Rosemount Aerospace, Inc. Pitot Probes
We are adopting a new airworthiness directive (AD) for Rosemount Aerospace Model 851AK pitot probes that were repaired by CSI Aerospace, Inc. between January 2013 and July 2014 that are installed on airplanes. This AD was prompted by a report that certain pitot probes are indicating the wrong airspeed during flight. This AD requires inspecting the airplane to determine the number of affected pitot probes installed and replacing the affected pitot probes. We are issuing this AD to address the unsafe condition on these products.
Establishment of Class E Airspace, Spanish Fork, UT
This action establishes Class E airspace extending upward from 700 feet above the surface, at Spanish Fork Airport Springville- Woodhouse Field, Spanish Fork, UT, to accommodate new area navigation (RNAV) procedures at the airport. This action ensures the safety and management of Instrument Flight Rules (IFR) operations within the National Airspace System.
Establishment of Class E Airspace; Johnson City, TN
This action establishes Class E airspace extending upward from 700 feet above the surface at Johnson City, TN, to accommodate new area navigation (RNAV) global positioning system (GPS) standard instrument approach procedures (SIAPs) serving Johnson City Medical Center Heliport. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at the heliport.
Airworthiness Directives; The Boeing Company Airplanes
We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 787 series airplanes. This proposed AD was prompted by reports that, under certain conditions, the automatic dependent surveillancebroadcast (ADS-B) out function and air traffic control/traffic alert and collision avoidance system (ATC/TCAS) functions can transmit incorrect data. This proposed AD would require an inspection or records review to determine if certain software is installed, the installation of new software for the integrated surveillance system (ISS) operational program software (OPS) if necessary, a software check, and applicable on-condition actions. For certain airplanes, this proposed AD would also require the installation of new software for the ISS OPS and the displays and crew alerting (DCA) database. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
We propose to supersede Airworthiness Directive (AD) 2014-05- 28, for certain Bombardier, Inc., Model DHC-8-400 series airplanes. AD 2014-05-28 requires revising the maintenance or inspection program, as applicable. Since we issued AD 2014-05-28, we have determined that the interval from maintenance review board (MRB) task number 323100-202 should not be escalated, and that Certification Maintenance Requirements (CMR) task number 323100-102 should be applicable to all Model DHC-8-400 series airplanes, regardless of which main landing gear (MLG) up-lock assembly is installed. This proposed AD would require revising the maintenance or inspection program, as applicable. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 767-300 and -300F series airplanes. This proposed AD was prompted by reports of fatigue cracking in the lower outboard wing skin at the farthest outboard fastener of the inboard segment of a certain stringer. This proposed AD would require repetitive high frequency eddy current (HFEC) inspections for cracking of the lower outboard wing skin at the inboard segment of a certain stringer, and repair if necessary. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This proposed AD was prompted by reports of cracks found in the rear spar web and lower chord on the left and right wings. This proposed AD would require repetitive detailed inspections for cracking of the rear spar web and lower chord, and applicable on- condition actions. We are proposing this AD to address the unsafe condition on these products.
Proposed Amendment of Class E Airspace, Hamilton, NY
This action proposes to amend Class E airspace at Hamilton Municipal Airport (formerly Elisha Payne Airport), Hamilton, NY, to accommodate airspace reconfiguration due to the decommissioning of the Georgetown VHF omni-directional radio range tactical air navigation aid (VORTAC), and cancellation of the VORTAC approach. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at the airport. This action also would update the geographic coordinates of the airport, and update the airport name.
Proposed Amendment of Class D Airspace and Class E Airspace, and Removal of Class E Airspace; Binghamton, NY
This action proposes to amend Class D airspace, Class E surface airspace, and Class E airspace extending upward from 700 feet above the surface; and remove Class E airspace designated as an extension to a Class D surface area; at Greater Binghamton Airport/ Edwin A. Link Field (formerly Binghamton Regional Airport/Edwin A. Link Field), Binghamton, NY. This action would accommodate airspace reconfiguration due to the decommissioning of the Binghamton VHF omni- directional radio range tactical air navigation aid (VORTAC), and cancellation of the VOR approaches. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at the airport. This action also would update the geographic coordinates of the airport, and correct the airport's name. Additionally, this action would replace the outdated term ``Airport/ Facility Directory'' with the term ``Chart Supplement'' in Class D and E surface airspace descriptions.
Amendment of Class D and E Airspace for the Following Missouri Towns; Cape Girardeau, MO; St. Louis, MO; and Macon, MO
This action modifies Class D airspace at Spirit of St. Louis Airport, St. Louis, MO; Class E airspace designated as a surface area at Cape Girardeau Regional Airport, Cape Girardeau, MO, and Spirit of St. Louis Airport; Class E airspace designated as an extension at Cape Girardeau Regional Airport; and Class E airspace extending upward from 700 feet above the surface at Cape Girardeau Regional Airport, Spirit of St. Louis Airport, and Macon-Fower Memorial Airport, Macon, MO. Cancellation of standard instrument approach procedures at these airports prompted the FAA to conduct a review of the airspace. Additionally, the name of Cape Girardeau Regional Airport (formerly Cape Girardeau Municipal Airport) and the geographic coordinates of St. Louis Regional Airport; Alton/St. Louis, IL; the OBLIO Locator Outer Marker (LOM); and the Macon-Fower Memorial Airport are being adjusted to coincide with the FAA's aeronautical database. The airspace designation for Macon-Fower, MO, in Class E airspace extending upward from 700 feet above the surface is being removed as it is a duplicate entry of the Macon, MO, airspace designation.
Revocation of Class E Airspace; Pulaski, WI
This action removes Class E airspace extending upward from 700 feet above the surface at Carter Airport, Pulaski, WI. The FAA is proposing this action due to the cancellation of the instrument procedures into the airport, resulting in the airport no longer qualifying for controlled airspace.
Airworthiness Directives; The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 777-200, -200LR, -300, and -300ER series airplanes. This AD was prompted by reports of corrosion in the aft fuselage. This AD requires a one-time review of the operator's maintenance procedures, repetitive detailed internal and external inspections for corrosion or cracking, and applicable on-condition actions. This AD also includes an optional terminating action for the inspections. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
We are superseding Airworthiness Directive (AD) 2012-12-12 and AD 2013-16-26, which applied to all Airbus Model A330-200, A330-200 Freighter, A330-300, A340-200, and A340-300 series airplanes. AD 2012- 12-12 required repetitive inspections of the outer skin rivets of the cargo doors, repair if necessary, and other repetitive inspections. AD 2013-16-26 required repetitive inspections of certain cargo doors, and repair if necessary. This new AD continues to require repetitive inspections, and repair if necessary. This new AD revises the applicability; adds a one-time inspection and adjustment of certain hook gaps; reinforcement of the door frame structure; related investigative and corrective actions if necessary; and a modification, which allows deferring reinforcement of the cargo door structure. This AD was prompted by a determination that a new inspection procedure is necessary to address the unsafe condition. We are issuing this AD to address the unsafe condition on these products.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Renewal, Agricultural Aircraft Operator Certificate Application
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The collection involves the submission of application FAA Form 8710-3 for the certification process. The information to be collected will be used to and/or is necessary to evaluate the operators request to become certified as an Agricultural Aircraft Operator.
Petition for Exemption; Summary of Petition Received; Executive Air Charter of Boca Raton, Inc., dba Fair Wind Air Charter
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; Minnesota Department of Natural Resources
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Agency Information Collection Activities: Notice of Request for Renewal of a Previously Approved Information Collection
The FHWA invites public comments about our intention to request the Office of Management and Budget's (OMB) approval for renewal of a previously approved information collection that is summarized below under SUPPLEMENTARY INFORMATION. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.
Agency Information Collection Activities: Notice of Request for Extension of Currently Approved Information Collection
The FHWA invites public comments about our intention to request the Office of Management and Budget's (OMB) approval for renewal of an existing information collection that is summarized below under SUPPLEMENTARY INFORMATION. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.
Agency Information Collection Activities: Request for Comments for a New Information Collection
The FHWA has forwarded the information collection request described in this notice to the Office of Management and Budget (OMB) for approval of a new information collection. We published a Federal Register Notice with a 60-day public comment period on this information collection on June 19, 2017. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.
Amendment of Class E Airspace; Fort Scott, KS; and Phillipsburg, KS
This action modifies Class E airspace extending upward from 700 feet above the surface at Fort Scott Municipal Airport, Fort Scott, KS, and Phillipsburg Municipal Airport, Phillipsburg, KS. This action is required due to the decommissioning of the Fort Scott non- directional radio beacon (NDB) and the Phillipsburg NDB, and the cancellation of the associated instrument approach procedures. This action enhances the safety and management of instrument flight rules (IFR) operations at these airports.
Modification of Air Traffic Service (ATS) Routes; Western United States
This action modifies VOR Federal Airways V-113 and V-244 which caused navigational aid gaps due to the decommissioning of Manteca and Maxwell VORs.
Airworthiness Directives; Bombardier, Inc., Airplanes
We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-1A11 (CL-600), CL-600-2A12 (CL- 601 Variant), and CL-600-2B16 (CL-601-3A, CL-601-3R, and CL-604 Variants) airplanes. This proposed AD was prompted by a determination that the safe life limits of the horizontal stabilizer trim actuator (HSTA) attachment pins and trunnions were not listed in certain airworthiness limitations (AWLs) and that the HSTA attachment pins and trunnions were not serialized. This proposed AD would require revision of the maintenance or inspection program, as applicable, to include the latest revision of the AWLs, serialization of the HSTA attachment pins and trunnions, and repair or replacement of damaged HSTA attachment pins and trunnions. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 727 airplanes. This proposed AD was prompted by significant changes made to the airworthiness limitations (AWLs) related to fuel tank ignition prevention. This proposed AD would require revising the maintenance or inspection program, as applicable, to incorporate the latest revision of the AWLs. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
We propose to supersede Airworthiness Directive (AD) 2016-23- 01, which applies to all Airbus Model A310 series airplanes. AD 2016- 23-01 requires repetitive detailed inspections for cracking around the fastener holes in certain areas of the wing top skin panels, supplemental repetitive ultrasonic inspections for cracking around the fastener holes in certain other areas of the wing top skin panels, and repair if necessary. Since we issued AD 2016-23-01, an evaluation done by the design approval holder (DAH) indicates that the wing top skin panel attachment holes at a certain area are also subject to widespread fatigue damage (WFD). This proposed AD would add an inspection and modification of the attachment holes of the wing top skin panels at a certain area. This proposed AD also includes terminating action for certain inspections. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
We propose to adopt a new airworthiness directive (AD) for all Airbus Model A310-203, -221, -222, -304, -322, -324, and -325 airplanes. This proposed AD was prompted by a design approval holder (DAH) evaluation indicating that the outer wing lower junction is subject to widespread fatigue damage (WFD). This proposed AD would require modifying the fastener holes at certain locations, which includes related investigative actions and applicable corrective actions. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; 328 Support Services GmbH (Type Certificate Previously Held by AvCraft Aerospace GmbH; Fairchild Dornier GmbH; Dornier Luftfahrt GmbH) Airplanes
We are adopting a new airworthiness directive (AD) for certain 328 Support Services GmbH Model 328-300 airplanes. This AD requires contacting the FAA to obtain instructions for addressing the unsafe condition on these products, and doing the actions specified in those instructions. This AD was prompted by a determination that incomplete inspection instructions exist for the skin under outer and inner doublers left installed after the removal of a certain data link system. We are issuing this AD to address the unsafe condition on these products.
Agency Information Collection Activities: Extension of an Approved Information Collection Request; Comment Request; Generic Clearance for the Collection of Qualitative Feedback on Agency Service Delivery
In accordance with the Paperwork Reduction Act of 1995, FMCSA announces its plan to submit the Information Collection Request (ICR) described below to the Office of Management and Budget (OMB) for its review and approval and invites public comment. The FMCSA requests approval to revise an existing ICR titled, ``Generic Clearance for the Collection of Qualitative Feedback on Agency Service Delivery,'' due to an increase in the annual cost to respondents. This ICR will allow for ongoing, collaborative and actionable communication between FMCSA and its customers and stakeholders. It will also allow feedback to contribute directly to the improvement of program management. On August 10, 2017, FMCSA published a Federal Register notice allowing for a 60-day comment period on this ICR. The agency received no comments in response to that notice.
Crash Preventability Demonstration Program
On July 27, 2017, FMCSA announced the initiation of a crash preventability demonstration program in which the Agency would accept requests for data review (RDRs) to evaluate the preventability of certain categories of crashes through its national data correction system known as DataQs. This notice provides additional information to help submitters and other interested parties understand the demonstration program.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.