Department of Transportation August 2017 – Federal Register Recent Federal Regulation Documents

Results 251 - 258 of 258
Proposed Establishment of Class E Airspace; Ellendale, ND
Document Number: 2017-16089
Type: Proposed Rule
Date: 2017-08-01
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to establish Class E airspace at Ellendale, ND. Controlled airspace is necessary to accommodate new special Instrument Approach Procedures developed at Ellendale Municipal Airport, for the safety and management of instrument flight rules (IFR) operations at the airport.
Airworthiness Directives; Airbus Airplanes
Document Number: 2017-15808
Type: Rule
Date: 2017-08-01
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Airbus Model A300 B4-600R series airplanes, Model A300 C4-605R Variant F airplanes, and Model A300 F4-600R series airplanes. This AD was prompted by the results of a full stress analysis of the lower area of a certain frame that revealed that a crack could occur in this area after a certain number of flight cycles. This AD requires an inspection of the lower area of a certain frame radius for cracking, and corrective action if necessary. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (Embraer)
Document Number: 2017-15807
Type: Rule
Date: 2017-08-01
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all Empresa Brasileira de Aeronautica S.A. (Embraer) Model EMB-135ER, - 135KE, -135KL, -135LR, -145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP airplanes. This AD was prompted by a report of airplanes with modified gust lock levers that prevented the thrust lever's full excursion, thus limiting the engine power. This AD requires replacing a certain gust lock lever. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Diamond Aircraft Industries GmbH Airplanes
Document Number: 2017-15669
Type: Rule
Date: 2017-08-01
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Diamond Aircraft Industries GmbH Model DA 42 airplanes. This AD requires installing engine exhaust pipe clamps with spring washers, repetitively inspecting the engine exhaust pipe clamps for cracks, and replacing the clamps if found cracked. This AD was prompted by cracks in the affected engine exhaust pipes, which could cause failure of the propeller regulating valve because of hot exhaust gases coming from the fractured pipes. We are issuing this AD to correct the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc. (Type Certificate Previously Held by Canadair Limited) Airplanes
Document Number: 2017-15555
Type: Rule
Date: 2017-08-01
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-215-6B11 (CL-415 Variant) airplanes. This AD was prompted by a report indicating that an oxygen bottle was found loose while the clamp strap was in the locked position. This AD requires modification of the clamp strap and installation of additional shims, as applicable, to the flight crew's oxygen bottles' retaining structures. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2017-15486
Type: Rule
Date: 2017-08-01
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-9 airplanes. This AD was prompted by a determination that the shoulder bolt used on the outboard clevis of the forward support fitting of the ram air turbine (RAT) might not be long enough to allow for proper installation of the RAT; therefore, the clevis of the joint could be clamped together, resulting in reduced fatigue life and possible fracture of the clevis. This AD requires inspecting for cracking of the clevis of the forward support fitting of the RAT, installing a longer shoulder bolt, and replacing the forward support fitting if any cracking is found. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2017-15477
Type: Rule
Date: 2017-08-01
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-300, -400, and -500 series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that the lower skin at the skin lap splice lower fastener row is subject to widespread fatigue damage (WFD). This AD requires repetitive inspections for cracking in the skin lap splice at the lower fastener row, and repair if necessary. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
Document Number: 2017-15476
Type: Rule
Date: 2017-08-01
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model DHC-8-102, -103, -106, -201, -202, -301, -311, and -315 airplanes. This AD was prompted by reports of undamped main landing gear (MLG) extension in-service. This AD requires replacement of the MLG retraction actuator rod-ends on both MLG assemblies. We are issuing this AD to address the unsafe condition on these products.