Department of Transportation June 2017 – Federal Register Recent Federal Regulation Documents
Results 151 - 200 of 300
Agency Information Collection Activities: Request for Comments for a New Information Collection
FHWA invites public comments about our intention to request the Office of Management and Budget's (OMB) approval for a new information collection, which is summarized below under SUPPLEMENTARY INFORMATION. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.
Agency Information Collection Activities: Notice of Request for Extension of Currently Approved Information Collection
The FHWA invites public comments about our intention to request the Office of Management and Budget's (OMB) approval for renewal of an existing information collection that is summarized below under SUPPLEMENTARY INFORMATION. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.
Agency Information Collection Activities: Request for Comments for a New Information Collection
The FHWA invites public comments about our intention to request the Office of Management and Budget's (OMB) approval for a new information collection, which is summarized below under Supplementary Information. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.
Agency Information Collection Activities: Notice of Request for Approval of a New Information Collection
The FHWA invites public comments about our intention to request the Office of Management and Budget's (OMB) approval of a new information collection that is summarized below. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.
Notice of Request for Revisions of an Information Collection
In accordance with the Paperwork Reduction Act of 1995, this notice announces the intention of the Federal Transit Administration (FTA) to request the Office of Management and Budget (OMB) to approve the revisions of the following information collection: Survey of FTA Stakeholders.
Notice of Request for Revisions of an Information Collection
In accordance with the Paperwork Reduction Act of 1995, this notice announces the intention of the Federal Transit Administration (FTA) to request the Office of Management and Budget (OMB) to approve a renewal without revisions to the following information: Generic Clearance for the Collection of Qualitative Feedback on Agency Service Delivery.
Agency Information Collection Activity Under OMB Review
In compliance with the Paperwork Reduction Act of 1995), this notice announces that the Information Collection Requirements (ICRs) abstracted below have been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describe the nature of the information collection and their expected burdens. The Federal Register notice with a 60-day comment period soliciting comments on the following collections of information was published on March 14, 2017 (82 FR 13923).
Agency Information Collection Activity Under OMB Review
In compliance with the Paperwork Reduction Act of 1995, this notice announces that the Information Collection Requirements (ICRs) abstracted below have been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describe the nature of the information collection and their expected burdens. The Federal Register notice with a 60-day comment period soliciting comments on the following collections of information was published on March 15, 2017 (82 FR 13923).
Special Conditions: Gulfstream Aerospace Corporation GVII-G500; Airbag Systems on Multiple-Place and Single-Place Side-Facing Seats
These special conditions are issued for the Gulfstream Aerospace Corporation (Gulfstream) GVII-G500 airplane. This airplane will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport- category airplanes. This design feature is airbag systems on multiple- place and single-place side-facing seats. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Agency Information Collection Activities: Request for Comments of a Previously Approved Information Collection: Procedures for Transportation Drug and Alcohol Testing Programs
In compliance with the Paperwork Reduction Act of 1995, this notice announces that the Information Collection Request abstracted below is being forwarded to the Office of Management and Budget for review and comments. A Federal Register Notice with a 60-day comment period soliciting comments on renewing the same information collection was published on March 15, 2017 [82 FR 13924]. There were no comments to the docket.
Airworthiness Directives; Ipeco Holdings Ltd. Pilot and Co-Pilot Seats
We propose to adopt a new airworthiness directive (AD) for certain Ipeco Holdings Ltd. (Ipeco) pilot and co-pilot seats. This proposed AD was prompted by reports of unexpected movement of pilot and co-pilot seats on takeoff and landing. This proposed AD would require modification and reidentification of the affected seats. We are proposing this AD to correct the unsafe condition on these products.
Airworthiness Directives; Airbus Defense and Space S.A. (Formerly Known as Construcciones Aeronauticas, S.A.) Airplanes
We propose to supersede Airworthiness Directive (AD) 2013-02- 12, which applies to all EADS CASA (now Airbus Defense and Space S.A.) Model CN-235, CN-235-100, CN-235-200, and CN-235-300 airplanes. AD 2013-02-12 currently requires a one-time inspection to identify the correct polarity for each pair of electrical connectors on each engine fire extinguisher cartridge, and repair if necessary. Since we issued AD 2013-02-12, we have determined it is necessary to add a requirement for modifying the installation of the fire extinguisher circuit harness. This proposed AD would continue to require identifying the correct polarity of each pair of electrical connectors of the affected engine fire extinguisher cartridge, and doing a repair if necessary. This proposed AD would also require modifying the installation of the fire extinguisher circuit harnesses. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; General Electric Company Turboshaft Engines
We propose to adopt a new airworthiness directive (AD) for certain General Electric Company (GE) CT7-8A and CT7-9B model turboshaft engines. This proposed AD was prompted by reports from the manufacturer that the high-pressure compressor (HPC) impeller installed on these engines may have suffered from material degradation during the manufacturing process. This proposed AD would require removal of the affected HPC impellers. We are proposing this AD to address the unsafe condition on these products.
Lease and Interchange of Vehicles; Motor Carriers of Passengers
FMCSA extends by one year the compliance date of the regulations established in the final rule on lease and interchange of passenger-carrying commercial motor vehicles (CMVs) published on May 27, 2015, and effective on July 27, 2015. The new compliance date is January 1, 2019. The Agency received numerous petitions for reconsideration of the final rule and extended the original January 1, 2017, compliance date to January 1, 2018, to provide time to address the issues raised by the petitioners. As a result of a public meeting with representatives of the passenger carrier industry in October 2016 and further analysis of the petitions for reconsideration, the Agency is extending the compliance date by an additional twelve months to allow time to revise the regulations, while ensuring that carriers have ample time to adjust to the requirements of the revisions. This decision is explained in more detail in a notice of intent published elsewhere in this issue of the Federal Register.
Lease and Interchange of Vehicles; Motor Carriers of Passengers
In response to petitions for reconsideration of the final rule on lease and interchange of passenger-carrying commercial motor vehicles (CMVs) published on May 27, 2015 and effective on July 27, 2015, FMCSA intends to revise the regulations to address ``chartering'' (subcontracting) and the 48-hour delay in preparing a lease. FMCSA is requesting public comment on the proposed responses to the petitions discussed below. In a final rule published elsewhere in this issue of the Federal Register, FMCSA extends the compliance date for the 2015 final rule from January 1, 2018, to January 1, 2019.
Hazardous Materials: Notice of Applications for Special Permits
In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations, notice is hereby given that the Office of Hazardous Materials Safety has received the application described herein. Each mode of transportation for which a particular special permit is requested is indicated by a number in the ``Nature of Application'' portion of the table below as follows: 1 Motor vehicle, 2Rail freight, 3Cargo vessel, 4Cargo aircraft only, 5Passenger-carrying aircraft.
Hazardous Materials: Notice of Applications for Special Permits
In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations, notice is hereby given that the Office of Hazardous Materials Safety has received the application described herein. Each mode of transportation for which a particular special permit is requested is indicated by a number in the ``Nature of Application'' portion of the table below as follows: 1 Motor vehicle, 2Rail freight, 3Cargo vessel, 4Cargo aircraft only, 5Passenger-carrying aircraft.
Hazardous Materials: Notice of Applications for Special Permits
In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations, notice is hereby given that the Office of Hazardous Materials Safety has received the application described herein. Each mode of transportation for which a particular special permit is requested is indicated by a number in the ``Nature of Application'' portion of the table below as follows: 1 Motor vehicle, 2Rail freight, 3Cargo vessel, 4Cargo aircraft only, 5Passenger-carrying aircraft.
Pipeline Safety: Meeting of the Voluntary Information-Sharing System Working Group
This notice announces a public meeting of the recently created Voluntary Information-Sharing System (VIS) Working Group. The VIS Working Group will convene to continue the discussion on the need for, and the identification of, a voluntary information-sharing system.
Twenty First Meeting of the NextGen Advisory Committee (NAC)
The FAA is issuing this notice to advise the public of a meeting of the Twenty First Meeting of the NextGen Advisory Committee (NAC). NAC is a subcommittee of the federal advisory committee, RTCA Inc.
Emergency Route Working Group-Notice of Public Meetings
This notice announces three meetings of the Emergency Route Working Group (ERWG). The Federal Advisory Committee Act (FACA) requires that notice of such meetings be published in the Federal Register.
Special Conditions: Peregrine, Textron Model 650 and Beechcraft Model BAe.125 Series 800A Airplanes; Rechargeable Lithium Batteries and Battery Systems
These special conditions are issued for the Textron Model 650 and Beechcraft Model BAe.125 Series 800A (Model 800A) airplanes as modified by Peregrine. These airplanes will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport-category airplanes. This design feature is rechargeable lithium batteries and battery systems installed in the airplanes. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Proposed Establishment of Class E Airspace; Hattiesburg, MS
This action proposes to establish Class E airspace extending upward from 700 feet above the surface at Forrest General Hospital Heliport in Hattiesburg, MS, to accommodate new area navigation (RNAV) global positioning system (GPS) standard instrument approach procedures (SIAPs) serving Forrest General Hospital Heliport. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at the heliport.
Proposed Amendment of Class E Airspace, Windsor Locks, CT
This action proposes to amend Class E airspace at Windsor Locks, CT, by removing the Notice to Airmen (NOTAM) part-time status at Bradley International Airport under Class E airspace designated as an extension to a Class C surface area. This change enhances the safety and management of instrument flight rules (IFR) operations at Bradley International Airport under these Class E airspace designations. This action also would update the geographic coordinates of the airport.
Airworthiness Directives; BAE Systems (Operations) Limited Airplanes
We are superseding Airworthiness Directive (AD) 2011-24-06 for all BAE Systems (Operations) Limited Model BAe 146-100A, -200A, and - 300A airplanes; and Model Avro 146-RJ70A, 146-RJ85A, and 146-RJ100A airplanes. AD 2011-24-06 required revising the maintenance program to incorporate life limits for certain items, adding new and more restrictive inspections to detect fatigue cracking in certain structures, and adding fuel system critical design configuration control limitations (CDCCLs) to prevent ignition sources in the fuel tanks. AD 2011-24-06 also required modifying the main fittings of the main landing gear (MLG) and revising the maintenance program to incorporate new life limits on MLG up-locks and door up-locks and other MLG components. This new AD requires revising the maintenance or inspection program, as applicable, to incorporate new or revised structural inspection requirements. This AD was prompted by a determination that new or revised structural inspection requirements are necessary. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-800, -900, and -900ER series airplanes. This AD was prompted by reports of in-flight failure of the left temperature control valve and control cabin trim air modulating valve. This AD requires replacing the left temperature control valve and control cabin trim air modulating valve. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
We are adopting a new airworthiness directive (AD) for certain Airbus Model A321-111, -112, -131, -211, -212, -213, -231, and -232 airplanes. This AD was prompted by a full scale fatigue test campaign on these airplanes in the context of the extended service goal. This AD requires inspections of the affected frame locations, and repair if necessary. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by a report that the equipment racks were not designed to support the actual weight of all the equipment and the secondary direct current power centers under all loading conditions. This AD requires modifying the equipment racks. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (Embraer) Airplanes
We are adopting a new airworthiness directive (AD) for certain Empresa Brasileira de Aeronautica S.A. (Embraer) Model EMB-135 airplanes and Model EMB-145, -145ER, -145MR, -145LR, -145MP, -145EP, and -145XR airplanes. This AD was prompted by a report of chafing found between the fuel pump electrical harness and the fuel pump tubing during scheduled maintenance. This AD requires a detailed inspection for chafing on the electrical harness of each electrical fuel pump in the fuel tanks, replacement of the affected electrical fuel pump with a new or serviceable pump if necessary, and installation of clamps on the fuel pump electrical harnesses. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Pratt & Whitney Division Turbofan Engines
We are adopting a new airworthiness directive (AD) for certain Pratt & Whitney Division (PW) PW2037, PW2037M, and PW2040 turbofan engines. This AD was prompted by an unrecoverable engine in-flight shutdown (IFSD) after an ice crystal icing event. This AD requires installing a software standard eligible for installation and precludes the use of electronic engine control (EEC) software standards earlier than SCN 5B/I. We are issuing this AD to correct the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
We are revising an earlier notice of proposed rulemaking (NPRM) to supersede Airworthiness Directive (AD) 2004-23-20. AD 2004- 23-20 applies to certain Airbus Model A300 B2-1A, A300 B2-1C, A300 B2K- 3C, A300 B2-203, A300 B4-2C, A300 B4-103, and A300 B4-203 airplanes; and Model A300 B4-601, A300 B4-603, A300 B4-620, A300 B4-622, A300 B4- 605R, A300 B4-622R, A300 F4-605R and A300 C4-605R Variant F airplanes. This action revises the NPRM by reducing certain compliance times, among other changes. We are proposing this airworthiness directive (AD) to address the unsafe condition on these products. Since these actions impose an additional burden over those proposed in the NPRM we are reopening the comment period to allow the public the chance to comment on these proposed changes.
Commercial Space Transportation Advisory Committee-Reestablishment
FAA announces the reestablishment of the COMSTAC, a Federal Advisory Committee that provides information, advice, and recommendations to the Department of Transportation and the Administrator of the Federal Aviation Administration (FAA) on the critical matters facing the U.S. commercial space transportation industry. This reestablishment will take effect 15 days after the publication of this announcement, and will expire after 2 years.
Special Conditions: Embraer S.A. Model ERJ 190-300 Airplane; Electronic System Security Protection From Unauthorized Internal Access
These special conditions are issued for the Embraer S.A. (Embraer) Model ERJ 190-300 airplane. This airplane will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport-category airplanes. This design feature is a digital-systems network architecture requiring isolation or protection from unauthorized internal access. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Special Conditions: Embraer S.A. ERJ 190-300 Airplane; Electronic-System Security Protection From Unauthorized External Access
These special conditions are issued for the Embraer S.A. (Embraer) ERJ 190-300 airplane. This airplane will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport-category airplanes. These airplanes will have a digital-systems network architecture composed of several connected networks that may allow access to or by external computer systems and networks, and may result in airplane electronic system-security vulnerabilities. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Airworthiness Directives; Bombardier, Inc., Airplanes
We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2A12 (CL-601 Variant) and CL- 600-2B16 (CL-601-3A, CL-601-3R, and CL-604 Variants) airplanes. This proposed AD was prompted by a determination that the bushing holes on the engine mount rib might not conform to the engineering drawings and that certain inspections of the engine mount rib must be included in the airworthiness limitations section (ALS) of the Instructions for Continued Airworthiness (ICA). This proposed AD would require revising the maintenance or inspection program to incorporate certain airworthiness limitation items (ALIs). We are proposing this AD to address the unsafe condition on these products.
Amendment and Removal of VOR Federal Airways; Eastern United States
This action modifies VOR Federal airways V-14, V-265, V-464, and V-552, and removes V-90 in the eastern United States due to the planned decommissioning of the Dunkirk, NY, VORTAC navigation aid, which provides navigation guidance for portions of the above routes.
Airworthiness Directives; Pratt & Whitney Turbofan Engines
We are superseding Airworthiness Directive (AD) 2014-05-32 for all Pratt & Whitney (PW) PW2037, PW2037D, PW2037M, PW2040, PW2040D, PW2043, PW2143, PW2643, and F117-PW-100 turbofan engines. AD 2014-05-32 required one-time eddy current inspection (ECI) of affected engines with certain diffuser and high-pressure turbine (HPT) cases installed. AD 2014-05-32 also required a fluorescent-penetrant inspection (FPI) of the diffuser case rear flange and the HPT case front flange. This AD requires additional repetitive, on-wing ECI inspections. This AD was prompted by the manufacturer determining through analysis that the inspections required by AD 2014-05-32 are not adequate to maintain safety for certain diffuser cases. We are issuing this AD to correct the unsafe condition on these products.
Airworthiness Directives; Rolls-Royce Corporation Turbofan Engines
We are adopting a new airworthiness directive (AD) for certain Rolls-Royce Corporation (RRC) AE 3007C and 3007C1 turbofan engines. This AD was prompted by analysis and by cracks found in the high- pressure turbine (HPT) wheel during an inspection. This AD requires replacement of the affected HPT wheels at new, lower life limits. We are issuing this AD to correct the unsafe condition on these products.
Airworthiness Directives; Lycoming Engines Reciprocating Engines
We are adopting a new airworthiness directive (AD) for all Lycoming TIO-540-AJ1A reciprocating engines. This AD requires initial and repetitive inspections of engine exhaust system weld joints and torque checking the exhaust pipe flange mounting nuts. This AD was prompted by several reports of engine exhaust leaks. We are issuing this AD to correct the unsafe condition on these products.
Commercial Driver's License Standards: C.R. England, Inc.; Granting of Renewal of Exemption
FMCSA announces its decision to renew an exemption for C.R. England, Inc. (C.R. England) requirements that a commercial learner's permit (CLP) holder is always accompanied by a commercial driver's license (CDL) holder with the proper CDL class and endorsements, seated in the front seat of the vehicle while the CLP holder operates it on public roads or highways. The exemption renewal allows CLP holders who have passed the skills test but not yet received the CDL document to drive a C.R. England commercial motor vehicle (CMV) accompanied by a CDL holder who is not necessarily in the passenger seat, provided the driver has documentation of passing the skills test. C.R. England currently holds an exemption for the period June 11, 2015 through June 12, 2017. FMCSA requests public comment on the renewal of C.R. England's exemption.
Environmental Impact Statement: St. Louis County, Missouri
The FHWA is issuing this notice to advise the public that an Environmental Impact Statement (EIS) will not be prepared for proposed improvements to the corridor generally following the existing pathway created by Missouri Bottom Road, Aubuchon Road, and Charbonier Road between Earth City Expressway and Howdershell/Shackelford Road in northwestern St. Louis County, Missouri.
Commercial Learner's Permit Validity
FMCSA proposes to amend the Federal Motor Carrier Safety Regulations (FMCSRs) to allow States to issue a commercial learner's permit (CLP) with an expiration date of up to one year from the date of initial issuance. CLPs issued for shorter periods may be renewed but the total period of time between the date of initial issuance and the expiration of the renewed CLP could not exceed one year. This proposed amendment would replace the current regulations, which require the States to issue CLPs initially for no more than 180 days, with the possibility of an additional 180-day renewal at the State's discretion.
Military Licensing and State Commercial Driver's License Reciprocity
This proposed rule would allow State Driver Licensing Agencies (SDLAs) to waive the requirements for the commercial driver's license (CDL) knowledge tests for certain individuals who are, or were, regularly employed within the last year in a military position that requires/required, the operation of a commercial motor vehicle (CMV).
Airworthiness Directives; The Boeing Company Airplanes
We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 787-8 and 787-9 airplanes. This proposed AD was prompted by a report that the Parking Brake and Alternate Pitch Trim Module (PBM) may unintentionally disengage, fail to set, fail to release, or become jammed. This proposed AD would require replacing the PBM and doing a PBM installation test. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Dassault Aviation Airplanes
We propose to adopt a new airworthiness directive (AD) for certain Dassault Aviation Model FALCON 7X airplanes. This proposed AD was prompted by a review showing that inadequate clearance may exist between certain electrical wiring and nearby structures. This proposed AD would require an inspection of certain electrical wiring bundles and feeders, modifications, and corrective actions if necessary. We are proposing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
