Department of Transportation November 28, 2016 – Federal Register Recent Federal Regulation Documents
Results 1 - 15 of 15
Revision of Form FHWA-1273
The FHWA is requesting comments on a proposed revision of form FHWA-1273``Required Contract Provisions Federal-Aid Construction Contracts.'' This form includes certain contract provisions that are required on all Federal-aid construction projects. The revisions are necessary to provide consistency with the current policies of FHWA and other Federal agencies.
Identification and Mitigation of Hazards Through Job Safety Briefings and Hazard Recognition Strategies
FRA is issuing Safety Advisory 2016-02 out of concern for the number of railroad and railroad contractor fatalities that occur when roadway workers perform certain activities that fall outside the scope of FRA's safety regulations, but within the purview of the U.S. Occupational Safety and Health Administration's (OSHA) regulations. FRA is issuing this Safety Advisory to remind railroads and railroad contractors, and their employees (including roadway workers) of the importance of identifying hazardous conditions at job locations, conducting thorough job safety briefings to discuss the hazardous conditions, and taking appropriate actions to mitigate those conditions. This Safety Advisory reminds railroads, railroad contractors, and their respective employees that OSHA's job safety regulations may apply to certain roadway worker activities and makes recommendations for hazard recognition strategies and challenge procedures that could improve roadway worker safety while roadway workers are engaged in activities subject to OSHA's regulations. FRA considers this Safety Advisory responsive to the National Transportation Safety Board's (NTSB) Recommendations R-14-33, R-14-35, and R-14-36.
Petition for Exemption; Summary of Petition Received; Astraeus Aerial
This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; Trimble Navigation Limited
This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; Rare Air Drone Services
This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; CK Aerial Photography LLC
This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; Leading Edge Associates, Inc.
This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received: Aero Medical Products Mfg., Inc.
This notice contains a summary of a petition seeking relief from specified requirements of Title 14, Code of Federal Regulations (14 CFR). The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of the FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Request for Comments
In accordance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the U.S. Department of Transportation (DOT) will forward the Information Collection Request (ICR) abstracted below to the Office of Management and Budget (OMB) for renewal of a previously approved collection. The ICR describes the nature of the information collection and its expected cost and burden hours. The OMB approved the form in 2015 with its renewal required by December 31, 2016. The Federal Register Notice with a 60-day comment period soliciting comments on the form renewal was published on September 16, 2016, [FR Vol. 81, No. 180, page 63855]. No comments were received.
Private Enterprise Participation
The Federal Transit Administration (FTA) hereby establishes policy guidance for documenting compliance with the private enterprise participation requirements under the Moving Ahead for Progress in the 21st Century Act (MAP-21). It also includes additional clarifications under the Fixing America's Surface Transportation (FAST) Act. Because the policy guidance requirement reiterates existing statutes and regulations and imposes no new requirements on recipients, FTA is not soliciting public comment on this policy guidance.
General Motors LLC, Receipt of Petition for Inconsequentiality and Decision Granting Request To File Out of Time and Request for Deferral of Determination
On May 16, 2016, TK Holdings Inc. (Takata) filed a defect information report (DIR), in which it determined that a defect existed in certain passenger-side air bag inflators that it manufactured, including passenger inflators that it supplied to General Motors, LLC (GM) for use in certain GMT900 vehicles. GM has petitioned the Agency for a decision that, because of differences in inflator design and vehicle integration, the equipment defect determined to exist by Takata is inconsequential as it relates to motor vehicle safety in the GMT900 vehicles, and that GM should therefore be relieved of its notification and remedy obligations.
Pipeline Safety: Meeting of the Voluntary Information-Sharing System Working Group
This notice announces a public meeting of the newly created Voluntary Information-Sharing System (VIS) Working Group. The VIS Working Group will convene to discuss administrative procedures and consider the development of a voluntary information-sharing system.
Vehicle Defect Reporting Requirements
NHTSA is proposing to require placing a label on the passenger side sun visor of light-duty vehicles that provides information about how to submit a safety-related motor vehicle defect complaint to NHTSA. This rulemaking also proposes updating the required information in 49 CFR 575.6 for defect reporting information in owner's manuals through the addition of the text developed for this proposal. This proposal responds to the mandate in the Moving Ahead for Progress in the 21st Century Act of 2012 (MAP-21) that manufacturers be required to affix, in the glove compartment or in another readily accessible location on the vehicle, a sticker, decal, or other device that provides, in simple and understandable language, information about how to submit a safety- related motor vehicle defect complaint to NHTSA; and prominently print the information described above within the owner's manual.
Airworthiness Directives; The Boeing Company Airplanes
We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 787-9 airplanes. This proposed AD was prompted by a determination that a certain bolt used on the outboard clevis of the ram air turbine (RAT) forward support fitting might not be long enough to allow for proper installation of the RAT. This proposed AD would require inspection of the forward support fitting of the RAT and replacement if cracking is found, and installation of a longer shoulder bolt. We are proposing this AD to address the unsafe condition on these products.
Deepwater Port License Application: Delfin LNG LLC; Delfin LNG Deepwater Port; Final Application Public Hearing and Final Environmental Impact Statement
The Maritime Administration (MARAD), in cooperation with the U.S. Coast Guard (USCG) and the Federal Energy Regulatory Commission (FERC), announces: (1) The schedule and locations of public hearings; and (2) the availability of the Final Environmental Impact Statement (EIS) for the Delfin LNG, LLC (Delfin LNG) deepwater port license application for the exportation of natural gas. A Notice of Application that summarized the original Delfin LNG deepwater port license application was published in the Federal Register on July 16, 2015 (80 FR 42162). A Notice of Intent (NOI) to Prepare an Environmental Impact Statement (EIS) and Notice of Public Meetings was published in the Federal Register on July 29, 2015 (80 FR 45270). A Notice of Receipt of Amended Application was published in the Federal Register on December 24, 2015 (80 FR 80455). A Notice of Availability (NOA) and Notice of Public Meetings for the Draft EIS was published in the Federal Register July 15, 2016 (81 FR 46157). This NOA incorporates the aforementioned Notices by reference. The proposed Delfin LNG deepwater port would be located in Federal waters within the Outer Continental Shelf (OCS) approximately 37.4 to 40.8 nautical miles off the coast of Cameron Parish, Louisiana. The proposed Delfin LNG deepwater port incorporates onshore components, which are subject to FERC jurisdiction. These facilities are described in the section of this Notice titled ``FERC Application.'' Publication of this notice begins a 45-day comment period, requests public participation in the environmental impact review process, provides information on how to participate in the process and announces final public hearings in Cameron, Louisiana and Beaumont, Texas. The Final EIS complies with the Deepwater Port Act of 1974, as amended (33 United States Code (U.S.C.) 1501 et seq.) (DWPA) and the National Environmental Policy Act (42 U.S.C. 4332(2)(C)) (NEPA), as implemented by the Council on Environmental Quality regulations (40 CFR 1500 to 1508). MARAD and the USCG request public comments on the Final EIS and the application. Pursuant to the criteria provided in the DWPA, both Louisiana and Texas have been designated as Adjacent Coastal States (ACS) for this application.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.