Department of Transportation September 2016 – Federal Register Recent Federal Regulation Documents

We are superseding Airworthiness Directive (AD) 2009-15-17 for certain Airbus Model A330-200 and -300 series airplanes; and Model A340-200 and -300 series airplanes. AD 2009-15-17 required an inspection for damage to the protective treatments or any corrosion of all main landing gear (MLG) bogie beams, and application of protective treatments if no damage or corrosion was found. If any damage or corrosion was found, corrective action followed by the application of protective treatments was required. This new AD continues to require inspections for damage to the protective treatments or any corrosion of all MLG bogie beams, application of protective treatments, and corrective action if necessary. This new AD also requires modification of the MLG bogie beams, which terminates the repetitive inspections for any modified bogie beam. This new AD allows optional methods of compliance for certain actions, and adds Airbus Model A330-200 Freighter series airplanes to the applicability. This new AD revises the compliance times and adds a one-time inspection for airplanes that were inspected too early. This AD was prompted by reports of thin paint coats and paint degradation on enhanced main landing gear (MLG) bogie beams, as well as reports that some airplanes have been inspected too early and not re-inspected as needed. We are issuing this AD to detect and correct damage or corrosion of the MLG bogie beams, which could cause a runway excursion event, bogie beam detachment from the airplane, or MLG collapse, and could result in damage to the airplane and injury to the occupants.

The FHWA is interested in gathering public comments on how certain provisions of the current law surrounding commercial activities in rest areas should be interpreted and applied in consideration of advancements in technology and the interests of the States.

FMCSA announces it will hold a roundtable discussion on October 31, 2016, as a follow-up to its August 31, 2016, notice of intent concerning the petitions for reconsideration of the final rule, titled ``Lease and Interchange of Vehicles; Motor Carriers of Passengers,'' which published May 27, 2015. The meeting will be open to the public. Individuals with diverse experience, expertise, and perspectives are encouraged to attend. If all comments have been exhausted before the end of the session, the session may conclude early.

This action modifies Class E airspace extending upward from 700 feet above the surface at Tekamah Municipal Airport, Tekamah, NE. Controlled airspace is necessary to accommodate standard instrument approach procedures (SIAP) at Tekamah Municipal Airport for the safety and management of Instrument Flight Rules (IFR) operations at airport.

The Surface Transportation Board is withdrawing the advance notice of proposed rulemaking and discontinuing the EP 681 rulemaking proceeding which sought comment on whether and how it should update its accounting and financial reporting for Class I rail carriers to better capture the operating costs of transporting hazardous materials.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. The FAA has established the ATC Authorization in Controlled Airspace under Part 107 portal to allow a remote pilot in command to request FAA authorization for a small unmanned aircraft to operate in Class B, C, D, and the lateral boundaries of the surface area of Class E airspace designated for an airport.

We are superseding Airworthiness Directive (AD) 2000-10-18 for certain Airbus Model A300 series airplanes; Model A300 B4-600, B4-600R, F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes); and Model A310 series airplanes. AD 2000-10-18 required repetitive inspections to detect cracks in the lower spar of the engine pylons between ribs 6 and 7, and repair if necessary. This new AD reduces the compliance times for the initial inspection and the repetitive intervals. This AD was prompted by the determination that the compliance times for the initial inspection and the repetitive intervals must be reduced to allow timely detection of cracks in the engine pylon's lower spar between ribs 6 and 7. We are issuing this AD to detect and correct fatigue cracking, which could result in reduced structural integrity of the engine pylon's lower spar, and possible separation of the engine from the airplane.

We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8 airplanes. This AD was prompted by a report of uncommanded movement by a captain's seat during a landing rollout due to a failure in the seat horizontal actuator. This AD requires repetitive tests of the captain and first officer seat assemblies for proper operation, and corrective action if necessary. This AD also requires installation of new captain and first officer seat assemblies, which terminates the repetitive tests. We are issuing this AD to prevent a seat actuator clutch failure, which could result in a loss of seat locking and uncommanded motion of the captain's or first officer's seat; uncommanded seat movement could result in reduced controllability of the airplane.

We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by fuel system reviews conducted by the manufacturer. This AD requires installing an automatic shutoff system for the center and auxiliary tank fuel boost pumps, as applicable; installing a placard in the airplane flight deck if necessary; replacing the P5-2 fuel system module assembly; installing the ``uncommanded ON'' (UCO) protection system for the fuel boost pumps; revising the airplane flight manual (AFM) to advise the flight crew of certain operating restrictions for airplanes equipped with an automatic shutoff system; and revising the maintenance program by incorporating new airworthiness limitations for fuel tank systems to satisfy Special Federal Aviation Regulation No. 88 requirements. We are issuing this AD to prevent operation of the center and auxiliary tank fuel boost pumps with continuous low pressure, which could lead to friction sparks or overheating in the fuel pump inlet that could create a potential ignition source inside the center and auxiliary fuel tanks. These conditions, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.

Automotive technology is at a moment of rapid change and may evolve farther in the next decade than in the previous 45-plus year history of the Agency. As the automobile industry moves toward fully automated (self-driving) vehicles and other innovative mobility solutions, NHTSA seeks to facilitate the advance of automated technologies that currently present safety improvements and that, in the future, are likely to improve safety and decrease the number of crashes, traffic fatalities, and serious injuries on U.S. roadways. NHTSA is commanded by Congress to protect the safety of the driving public against unreasonable risks of harm that may occur because of the design, construction, or performance of a motor vehicle or motor vehicle equipment, and to mitigate risks of harm, including risks that may be emerging or contingent. As NHTSA has always done when evaluating new vehicle technologies, the Agency will be guided by its statutory mission, the laws it is obligated to enforce, and the benefits of the emerging automated safety technologies appearing on U.S. roadways. NHTSA has broad enforcement authority under existing statutes and regulations to address existing and emerging automated safety technologies. This Enforcement Guidance Bulletin sets forth NHTSA's current views on its enforcement authorityincluding its view that when vulnerabilities in automated safety technology or equipment pose an unreasonable risk to safety, those vulnerabilities constitute a safety-related defectand suggests guiding principles and best practices for motor vehicle and equipment manufacturers in this context.

NHTSA invites public comment on the document, ``Federal Automated Vehicles Policy.'' This document is intended as a starting point that provides needed initial guidance to industry, government, and consumers. It will necessarily evolve over time, changing based on public comment; the experience of the agency, manufacturers, suppliers, consumers, and others; and/or further technological innovation. NHTSA intends to revise and refine the document within one year, and periodically thereafter, to reflect such public input, experience, and innovation, and will address significant comments received in the next revision of this document.

FMCSA announces its decision to grant ArcelorMittal Indiana Harbor, LLC (ArcelorMittal) exemptions from the hours of service (HOS) and parts and accessories rules. One exemption will allow ArcelorMittal's employee-drivers with commercial driver's licenses (CDLs) who transport steel coils between their production and shipping locations on public roads to work up to 16 hours per day and return to work with less than the mandatory 10 consecutive hours off duty. The other exemption will allow ArcelorMittal to use coil carriers that do not meet the ``heavy hauler trailer'' definition, height of rear side marker lights restrictions, tire loading restrictions, and the coil securement requirements.

Consistent with the Paperwork Reduction Act of 1995 (PRA) and its implementing regulations, this document provides notice that FRA is submitting an Information Collection Request (ICR) to the Office of Management and Budget (OMB) to collect information on railroads' implementation of Positive Train Control (PTC) systems on an annual form entitled the Annual PTC Progress Report Form (Form FRA F 6180.166).

Under the Paperwork Reduction Act of 1995 (PRA) and its implementing regulations, FRA seeks approval of the proposed information collection activities described below. Before submitting the proposed information collection requests (ICRs) to the Office of Management and Budget (OMB) for approval, FRA is soliciting public comment on specific aspects of the activities, which are identified in this notice.

A Notice of Intent to prepare an Environmental Impact Statement was published in the Federal Register on May 9, 2012. The Ohio Department of Transportation (ODOT) is issuing this notice to advise the public that ODOT will no longer prepare a Tier 2 EIS for proposed improvements to SR 32 from US 50 in Hamilton County east to IR 275 in Clermont County, because of potential significant environmental impacts and public controversy.

This action proposes to modify Class E surface area at Ankeny Regional Airport, Ankeny, IA; and Class E airspace extending upward from 700 feet above the surface at Algona Municipal Airport, Algona, IA; Ankeny Regional Airport; Atlantic Municipal Airport, Atlantic, IA; Belle Plaine Municipal Airport, Belle Plaine, IA; Creston Municipal Airport, Creston, IA; Estherville Municipal Airport, Estherville, IA; Grinnell Regional Airport, Grinnell, IA; Guthrie County Regional Airport, Guthrie Center, IA; and Oelwein Municipal Airport, Oelwein, IA. Decommissioning of non- directional radio beacons (NDB), cancellation of NDB approaches, and implementation of area navigation (RNAV) procedures have made this action necessary for the safety and management of Instrument Flight Rules (IFR) operations at the above airports. Additionally, the geographic coordinates for Algona Municipal Airport, Atlantic Municipal Airport, and Grinnell Regional Airport would be adjusted to coincide with the FAA's aeronautical database. The name of Belle Plaine, IA, would also be adjusted to correct a misspelling in the legal description.

This action amends Class E Airspace at Indiana, PA, to accommodate the new runway at Indiana County Airport (Jimmy Stewart Field). This action enhances the safety and management of Instrument Flight Rules (IFR) operations at the airport. This action also updates the geographic coordinates of the airport.

This action amends Class E Airspace at Glasgow, KY as the Beaver Creek Non-Directional Beacon (NDB) has been decommissioned, requiring airspace reconfiguration at Glasgow Municipal Airport. This action enhances the safety and management of Instrument Flight Rules (IFR) operations at the airport. This action also updates the geographic coordinates of the airport.

This notice announces actions taken by FHWA and other Federal agencies that are final within the meaning of 23 U.S.C. 139(l)(1). The actions relate to the proposed Interstate 495 (Long Island Expressway) Rest Area Upgrade Project between Exits 51 & 52 (eastbound) in the Town of Huntington, Suffolk County, New York (NYSDOT Project Identification Number: 0229.14). Those actions rescind the Record of Decision (ROD) and the Final Environmental Impact Statement (FEIS) dated May 21, 2007. The ROD was signed by FHWA on August 6, 2007.

We propose to adopt a new airworthiness directive (AD) for certain Boeing Model 707 airplanes and Model 720 and 720B series airplanes. This proposed AD was prompted by fuel system reviews conducted by the manufacturer. This proposed AD would require modifying the fuel quantity indicating system (FQIS) to prevent development of an ignition source inside the center fuel tank due to electrical fault conditions. We are proposing this AD to prevent ignition sources inside the center fuel tank, which, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.

The FAA is issuing this notice to advise the public of a meeting of Thirty Second RTCA SC-213 Enhanced Flight Vision Systems/ Synthetic Vision Systems (EFVS/SVS).

This action amends Class E airspace Designated as an Extension at Ithaca Tompkins Regional Airport, Ithaca, NY, by updating the geographic coordinates of the Ithaca VHF omnidirectional range/distance measuring equipment, (VOR/DME), and the airport, as well as changing the airport name. This is an administrative change and does not affect the boundaries or operating requirements of the airspace.

This action removes Class E surface area airspace at Alliance Municipal Airport, Alliance, NE; and modifies Class E airspace extending upward from 700 feet above the surface at Albion Municipal Airport, Albion, NE; Alliance Municipal Airport, Alliance, NE; Quinn Field, Gothenburg, NE; Brewster Field Airport, Holdrege, NE; Imperial Municipal Airport, Imperial, NE; Jim Kelly Field, Lexington, NE; and Millard Airport, Omaha, NE. Decommissioning of non-directional radio beacons (NDB), cancellation of NDB approaches, and implementation of area navigation (RNAV) procedures have made this action necessary for the safety and management of Instrument Flight Rules (IFR) operations at the above airports. This action also updates the geographic coordinates for Quinn Field, Imperial Municipal Airport, and Jim Kelly Field to coincide with the FAA's aeronautical database.

This action establishes Class E surface area airspace and modifies Class E airspace extending upward from 700 feet above the surface at Truckee-Tahoe Airport, Truckee, CA, to increase safety and enhance existing instrument flight rules (IFR) operations in the immediate vicinity of the airport.