Department of Transportation July 27, 2016 – Federal Register Recent Federal Regulation Documents

Tribal Transportation Self-Governance Program; Negotiated Rulemaking Proposed Committee Membership and First Meeting
Document Number: 2016-17761
Type: Proposed Rule
Date: 2016-07-27
Agency: Federal Highway Administration, Department of Transportation
As required by the Negotiated Rulemaking Act, the Secretary of Transportation has selected the proposed members of a committee to develop proposed rules for the Tribal Transportation Self-Governance Program (TTSGP). Tribes in each of the 12 Bureau of Indian Affairs (BIA) Regions, as well as national and regional tribal organizations were invited to nominate a primary and alternate representative to serve on the committee. After considering the nominations received, the Secretary proposes to appoint the persons named in this document as committee members. Tribes, tribal organizations, and individual tribal members who believe that their interests will not be adequately represented by the persons identified in this document may submit comments on the proposed selection, apply for membership on the committee, or submit other nominations. Additionally, the Agency announces that the first meeting of the TTSGP committee will be held August 16-18, 2016. The meeting is open to the public.
EUROCAE WG-99 PLENARY #8/RTCA SC-234 Plenary #5-Calling Notice “Portable Electronic Devices (PEDs)”
Document Number: 2016-17759
Type: Notice
Date: 2016-07-27
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of EUROCAE WG-99 PLENARY #8/RTCA SC-234 Plenary #5Calling Notice ``Portable Electronic Devices (PEDs)''.
Petition for Exemption; Summary of Petition Received
Document Number: 2016-17652
Type: Notice
Date: 2016-07-27
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Notice of Availability of Midterm Evaluation Draft Technical Assessment Report for Model Year 2022-2025 Light Duty Vehicle GHG Emissions and CAFE Standards
Document Number: 2016-17649
Type: Notice
Date: 2016-07-27
Agency: Environmental Protection Agency, Department of Transportation
The Environmental Protection Agency (EPA) and the National Highway Traffic Safety Administration (NHTSA) have established a coordinated National Program for Federal standards for greenhouse gas (GHG) emissions and corporate average fuel economy (CAFE) for light- duty vehicles. As part of that National Program, EPA and NHTSA, along with the California Air Resources Board (CARB), have jointly prepared and are requesting comment on a Draft Technical Assessment Report. In the Draft Technical Assessment Report, the agencies examine a wide range of issues relevant to GHG emissions and CAFE standards for model years (MY) 2022-2025, and share with the public their initial technical analyses of those issues. EPA is required to prepare the Draft Technical Assessment Report by its rules which establish the Midterm Evaluation. The draft TAR is the first formal step in the Midterm Evaluation process. NHTSA is participating in the Midterm Evaluation process as part of its de novo rulemaking to establish final CAFE standards for MY 2022-2025. CARB, in its support of the National Program in lieu of a separate California program, committed to participating in the Midterm Evaluation process. The agencies will fully consider public comments received on the Draft Technical Assessment Report as they proceed with the Midterm Evaluation.
Repair Stations
Document Number: 2016-17612
Type: Rule
Date: 2016-07-27
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration (FAA) is revising its repair station rules to remove the requirement that a repair station with an airframe rating provide suitable permanent housing to enclose the largest type and model aircraft listed on its operations specifications. The FAA is also revising its general housing and facilities regulation to provide that a repair station's housing for its facilities, equipment, materials, and personnel must be consistent not only with its ratings, but also with its limitations to those ratings. Finally, the FAA is adding an additional general purpose limited rating to cover maintenance work not covered by the existing 12 limited rating categories. These changes are necessary because the existing ratings and housing rules impose unnecessary housing requirements on certain repair stations that work only on component parts of an aircraft. These changes will enable some repair stations to obtain a limited rating that is tailored to their intended scope of work, and will relieve repair stations that have a limited airframe rating, but that work only on component parts of an aircraft, from having to provide large and expensive housing to enclose the entire aircraft when that type of housing is not needed for the limited scope of their work.
Airworthiness Directives; Bombardier, Inc. Airplanes
Document Number: 2016-17538
Type: Rule
Date: 2016-07-27
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports of operator inability to open the main passenger door following severe hot soak conditions. This AD requires the incorporation of a new configuration to the passenger door external handle detent to enhance the performance across the full range of the airplane operating temperatures. We are issuing this AD to prevent thermal expansion and permanent deformation at severe hot soak conditions, creating high friction between the spring pot housing and the slider that could result in inability to open the main passenger door and impede evacuation in the event of an emergency.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.