Department of Transportation 2015 – Federal Register Recent Federal Regulation Documents
Results 251 - 300 of 2,301
Airworthiness Directives; The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-100,-200,-200C,-300,-400, and -500 series airplanes. This AD was prompted by reports of cracks in fuselage frames, and a report of a missing strap that was not installed on a fuselage frame during production. This AD requires an inspection to determine if the strap adjacent to a certain stringer is installed, and repair if it is missing; repetitive inspections of the frame for cracking or a severed frame web; and related investigative and corrective actions if necessary. This AD also provides optional actions to terminate certain repetitive inspections. We are issuing this AD to detect and correct missing fuselage frame straps and frame cracking that can result in severed frames which, with multiple adjacent severed frames, or the combination of a severed frame and fuselage skin chemical mill cracks, can result in uncontrolled decompression of the airplane.
Agency Information Collection Activities; New Information Collection Request: 391.41 CMV Driver Medication Form
In accordance with the Paperwork Reduction Act of 1995, FMCSA announces its plan to submit the Information Collection Request (ICR) described below to the Office of Management and Budget (OMB) for its review and approval and invites public comment on the approval of a new ICR titled, 391.41 CMV Driver Medication Form. This ICR is voluntary and may be utilized by medical examiners (MEs) responsible for issuing Medical Examiner's Certificates (MECs) to commercial motor vehicle (CMV) drivers. MEs that choose to use this ICR will do so in an effort to communicate with treating healthcare professionals who are responsible for prescribing certain medications, so that the ME fully understands the reasons the medications have been prescribed. The information obtained by the ME when utilizing this ICR will assist the ME in determining if the driver is medically qualified under 49 CFR 391.41 and to ensure that there are no disqualifying medical conditions or underlying medical conditions and prescribed medications that could adversely affect their safe driving ability or cause incapacitation constituting a risk to the public.
Federal Policy for the Protection of Human Subjects
The Department of Health and Human Services and the other Federal Departments and Agencies listed in this document are extending the comment period on the Federal Policy for the Protection of Human Subjects notice of proposed rulemaking. The NPRM requests comment on proposed revisions to modernize, strengthen, and make more effective the Federal Policy for the Protection of Human Subjects that was promulgated as a Common Rule in 1991. The NPRM was published in the Federal Register on September 8, 2015.
Indiana Southern Railroad, LLC-Temporary Trackage Rights Exemption-Norfolk Southern Railway Company
Under 49 U.S.C. 10502, the Board revokes the class exemption as it pertains to the trackage rights described in Docket No. FD 35965 \1\ to permit the trackage rights to expire on January 1, 2020, as provided in the underlying temporary trackage rights agreement subject to the employee protective conditions set forth in Oregon Short Line RailroadAbandonment Portion Goshen Branch Between Firth & Ammon, in Bingham & Bonneville Counties, Idaho, 360 I.C.C. 91 (1979).
Requested Administrative Waiver of the Coastwise Trade Laws: Vessel VAGO; Invitation for Public Comments
As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.
Environmental Impact Statement: Alexander, Pulaski, and Union Counties, Illinois
The FHWA is issuing this notice to advise the public that an Environmental Impact Statement (EIS) will be prepared for the Shawnee Parkway Project in Alexander, Pulaski, and Union Counties, Illinois.
Proposed Agency Information Collection Activities; Comment Request
In accordance with the Paperwork Reduction Act of 1995 and its implementing regulations, the Federal Railroad Administration (FRA) hereby announces that it is seeking renewal of the following currently approved information collection activities. Before submitting these information collection requests (ICRs) for clearance by the Office of Management and Budget (OMB), FRA is soliciting public comment on specific aspects of the activities identified below.
Petition for Exemption; Summary of Petition Received; Cape Productions, Inc.
This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Aviation Rulemaking Advisory Committee; Meeting
The FAA is issuing this notice to advise the public of a meeting of the ARAC.
Airworthiness Directives; Turbomeca S.A. Turboshaft Engines
We propose to supersede airworthiness directive (AD) 2006-23- 17, which applies to certain Turbomeca S.A. Turmo IV A and IV C turboshaft engines. AD 2006-23-17 currently requires repetitive inspections of the centrifugal compressor intake wheel (inducer) blades for cracks and corrosion, replacement of parts that fail inspection, and replacement of the TU 197 standard centrifugal compressor. This proposed AD would require the same inspections but at revised intervals, add the replacement of the TU 215 standard centrifugal compressor, and require replacement of parts that fail inspection. We are proposing this AD to prevent failure of the centrifugal compressor inducer, which could lead to an uncontained blade release, damage to the engine, and damage to the airplane.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: B4UFLY Smartphone App
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The FAA's B4UFLY smartphone app will provide situational awareness of flight restrictionsincluding locations of airports, restricted airspace, special use airspaces, and temporary flight restrictionsbased on a user's current or planned flight location.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Pilot Schools-FAR 141
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. 49 U.S.C. 44707 empowers the Administrator of the Federal Aviation Administration (FAA) to provide for the examination and rating of civilian schools giving instruction in flying. This CFR prescribes the requirements for issuing pilot school certificates, provisional pilot school certificates and associated ratings to qualified applicants.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Operating Requirements: Commuter and On-Demand Operation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. Title 49 U.S.C., section 44702 authorizes issuance of air carrier operating certificates. 14 CFR part 135 prescribes requirement for Air Carrier/Commercial Operators. The info collected shows compliance and applicant eligibility.
Approval of Noise Compatibility Program, Ted Stevens Anchorage International Airport and Lake Hood Seaplane Base, Anchorage, AK
The Federal Aviation Administration (FAA) announces its findings on the Noise Compatibility Program submitted by the Alaska Department of Transportation & Public Facilities (ADOT&PF) under the provisions of 49 U.S.C. (the Aviation Safety and Noise Abatement Act, hereinafter referred to as ``the Act'') and 14 CFR Part 150. These findings are made in recognition of the description of Federal and nonfederal responsibilities in Senate Report No. 96-52 (1980). On July 27, 2015, the FAA determined that the noise exposure maps (NEM) submitted by the ADOT&PF under Part 150 were in compliance with applicable requirements. On November 17, 2015, the FAA approved the Ted Stevens Anchorage International Airport (ANC) and Lake Hood Seaplane Base (LHD) noise compatibility program (NCP). Most of the recommendations of the program were approved.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Dealer's Aircraft Registration Certificate Application
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to reinstate a previously discontinued information collection. AC Form 8050-5 is an application for a dealer's Aircraft Registration Certificate which, under 49 United States Code 1404, may be issued to a person engaged in manufacturing, distributing, or selling aircraft.
Proposed Agency Information Collection Activities; Comment Request
In compliance with the Paperwork Reduction Act of 1995, this notice announces that the Information Collection Requests (ICRs) abstracted below are being forwarded to the Office of Management and Budget (OMB) for review and comment. The ICRs describes the nature of the information collections and their expected burdens. The Federal Register notice with a 60-day comment period soliciting comments on the following collections of information was published on March 3, 2015 (80 FR 11518).
Proposed Establishment of Class E Airspace, South Naknek, AK
This action proposes to establish Class E airspace extending upward from 700 feet above the surface at South Naknek NR 2 Airport, South Naknek, AK, to accommodate new Area Navigation (RNAV) Global Positioning System (GPS) standard instrument approach procedures developed for the airport. The FAA is proposing this action to enhance the safety and management of Instrument Flight Rules (IFR) operations at the airport.
Proposed Establishment of Class E Airspace, South Bend, WA
This action proposes to establish Class E airspace at Willapa Harbor Heliport, South Bend, WA, to accommodate new standard instrument approach and departure procedures developed at the heliport. Controlled airspace is necessary for the safety and management of Instrument Flight Rules (IFR) operations at the heliport.
Airworthiness Directives; Turbomeca S.A. Turboshaft Engines
We propose to adopt a new airworthiness directive (AD) for certain Turbomeca S.A. Arriel 1E2 turboshaft engines. This proposed AD was prompted by reports of uncommanded in-flight shutdowns (IFSDs). This proposed AD would require removing the tachometer box on affected engines. We are proposing this AD to prevent failure of the tachometer box, which could lead to failure of the engine, IFSD, and loss of control of the helicopter.
Airworthiness Directives; Turbomeca S.A. Turboshaft Engines
We propose to adopt a new airworthiness directive (AD) for certain Turbomeca S.A. Arriel 2B, 2B1, 2C, 2C1, 2C2, 2D, 2E, 2S1, and 2S2 turboshaft engines. This proposed AD was prompted by a report of an uncommanded in-flight shutdown of an Arriel 2 engine caused by rupture of the 41-tooth gear, which forms part of the bevel gear in the engine accessory gearbox (AGB). This proposed AD would require inspection, and, depending on the results, removal of the engine AGB. We are proposing this AD to prevent failure of the engine AGB, which could lead to in-flight shutdown, damage to the engine, and damage to the aircraft.
Establishment of Class E Airspace; Newberry, MI
This action corrects an error in the legal description of a final rule published in the Federal Register of September 24, 2015, that establishes Class E airspace at the Newberry VHF Omni-Directional Range/Distance Measuring Equipment (VOR/DME), Newberry, MI. The legal description noted exclusionary language for Federal airways and Canadian airspace not required for this airspace.
Airworthiness Directives; Airbus Airplanes
We are adopting a new airworthiness directive (AD) for all Airbus Model A318, A319, A320, and A321 series airplanes. This AD was prompted by a determination that, in specific flight conditions, the allowable load limits on the vertical tail plane could be reached and possibly exceeded. Exceeding allowable load could result in detachment of the vertical tail plane. This AD requires modification of the pin programming flight warning computer (FWC) to activate the stop rudder input warning (SRIW) logic; and an inspection to determine the part numbers of the FWC and the flight augmentation computer (FAC), and replacement of the FWC and FAC if necessary. We are issuing this AD to prevent detachment of the vertical tail plane and consequent loss of control of the airplane.
Airworthiness Directives; ATR-GIE Avions de Transport Régional Airplanes
We are adopting a new airworthiness directive (AD) for all ATRGIE Avions de Transport R[eacute]gional Model ATR42 and ATR72 airplanes. This AD was prompted by new occurrences of certain cracked main landing gear (MLG) rear hinge pins. This AD requires identifying the serial number and part number of the MLG rear hinge pins, and replacing pins or the MLG if necessary. We are issuing this AD to detect and correct cracked rear hinge pins, which could lead to MLG structural failure, possibly resulting in collapse of the MLG and consequent injury to the occupants of the airplane.
Best Practices for Designing Vision Field Tests for Locomotive Engineers or Conductors
FRA is issuing this interim interpretation to clarify provisions in its locomotive engineer and conductor qualification and certification regulations with respect to vision standards and testing. In particular, this document addresses further evaluation of persons who do not meet the vision threshold criteria provided for in those regulations, and provides best practices guidance for designing valid, reliable, and comparable vision field tests for assessing whether persons who do not meet those thresholds can perform safely as locomotive engineers and conductors.
Airworthiness Directives; Airbus Airplanes
We are superseding Airworthiness Directive (AD) 2008-22-20 for certain Airbus Model A330-200, A330-300, and A340-300 series airplanes. AD 2008-22-20 required repetitive high frequency eddy current (HFEC) inspections for cracking, repair if necessary, and modification of the upper shell structure of the fuselage. This new AD shortens certain compliance times. This AD was prompted by a determination from a fatigue and damage tolerance evaluation that the compliance times must be reduced. We are issuing this AD to prevent fatigue cracking of the upper shell structure of the fuselage, which could result in reduced structural integrity of the airplane.
Meeting: RTCA Program Management Committee (PMC)
The FAA is issuing this notice to advise the public of a RTCA Program Management Committee meeting.
Agency Request for Renewal of a Previously Approved Information Collection: Exemptions for Air Taxi Operations
The Department of Transportation (DOT) invites public comments about our intention to request the Office of Management and Budget (OMB)'s approval to renew an information collection. The collection involves a classification of air carriers known as air taxi operators and their filings of a one-page form that enables them to obtain economic authority from DOT. The information to be collected is necessary for DOT to determine whether an air taxi operator meets DOT's criteria for an economic authorization in accordance with DOT rules. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995, Public Law 104-13.
U.S. Fish and Wildlife Service Long Range Transportation Plan for Service-Managed Lands
The Federal Highway Administration, along with the U.S. Fish and Wildlife Service (Service), announce the availability of a draft Service Long Range Transportation Plan (LRTP) for public review and comment. The Draft LRTP outlines a strategy for improving and maintaining transportation assets that provide access to Service- managed lands nationally over the next 20 years. Preparing this document helps the Service meet transportation planning requirements under the Moving Ahead for Progress in the 21st Century Act (MAP-21).
Final Theft Data; Motor Vehicle Theft Prevention Standard
This document publishes the final data on thefts of model year (MY) 2013 passenger motor vehicles that occurred in calendar year (CY) 2013, including theft rates for existing passenger motor vehicle lines manufactured in model year (MY) 2013.
Hazardous Materials: Editorial Corrections and Clarifications (RRR)
This final rule corrects editorial errors, makes minor regulatory changes and, in response to requests for clarification, improves the clarity of certain provisions in the Hazardous Materials Regulations. The intended effect of this rule is to enhance the accuracy and reduce misunderstandings of the regulations. The amendments contained in this rule are non-substantive changes and do not impose new requirements.
Information and Guidance on the Inspection, Testing, and Maintenance of Emergency Window Exits on Railroad Passenger Cars
FRA has become aware of occurrences when emergency window exits on passenger cars did not operate as intended because the emergency pull handle became detached from the window gasket when pulled, the gasket tore into multiple pieces, or the gasket was otherwise difficult to remove. While investigating these occurrences, FRA discovered that some railroads were not following, or did not clearly understand, the existing Federal regulations on the inspection, testing, and maintenance (ITM) of these window exits, particularly the requirement that a railroad must utilize a test sampling method that conforms with a formalized statistical test method. FRA does not believe any of these occurrences involved passengers or precluded passengers from opening a window in an emergency situation. However, in light of these concerns, FRA is issuing this document to provide information and guidance to railroads operating passenger train service on the existing regulatory requirements regarding ITM of emergency window exits.
Special Conditions: Gulfstream Aerospace Corporation, Gulfstream GVI Airplane; Non-Rechargeable Lithium Battery Installations
This action proposes special conditions for the Gulfstream Aerospace Corporation GVI airplane. This airplane will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport-category airplanes. This design feature is non-rechargeable lithium battery systems. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Special Conditions: Associated Air Center, Boeing Model 747-8 Airplane; Shoulder-Belt Airbags for Side-Facing Seats
These special conditions are issued for the Boeing Model 747-8 airplane. This airplane, as modified by Associated Air Center, will have novel or unusual design features associated with side-facing seats and airbag-equipped shoulder belts for these side-facing seats. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Special Conditions: Flight Structures, Inc., Boeing Model 777-200 Dynamic Test Requirements for Single-Occupant, Oblique (Side-Facing) Seats With Airbag Devices
This document corrects an error that appeared in Docket No. FAA-2015-3367, Special Conditions No. 25-596-SC, which was published in the Federal Register on September 30, 2015 (80 FR 58597). The error is in a reference to Boeing in a note preceding a section titled, Inflatable Lap Belt Special Conditions. It is being corrected herein.
Airworthiness Directives; The Boeing Company Airplanes
We propose to supersede Airworthiness Directive (AD) 2006-19- 12, which applies to certain The Boeing Model 777-200 and -300 series airplanes. AD 2006-19-12 currently requires inspecting the lower web of the aft fairing of the engine struts for any discoloration and doing any related investigative and corrective action if necessary; inspecting the heat shield castings for any damage and doing any corrective action if necessary; installing gap cover strips; and replacing insulation blankets with new insulation blankets. Since we issued AD 2006-19-12, we have received a report that an aft fairing lower spar web exceeded the allowable conductivity limits. This proposed AD would also require, depending on airplane configuration, one-time or repetitive detailed inspections for cracking and deformation, as applicable, of the aft fairing lower structure, and one-time or repetitive conductivity inspections of the aft fairing lower structure and related investigative and corrective actions if necessary. This proposed AD also adds airplanes to the applicability. We are proposing this AD to detect and correct degradation of the aft fairing lower web, which could lead to cracking of the web and could allow flammable fluids to leak into the heat shield pan castings, and consequent increased risk of an uncontained fire and subsequent structural damage.
Special Conditions: CFM International, LEAP-1B Engine Models; Incorporation of Woven Composite Fan Blades
These special conditions are issued for the CFM International (CFM), LEAP-1B engine models. This engine model will have a novel or unusual design feature associated with the engine: woven composite fan blades. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Environmental Impact and Related Procedures
This NPRM provides interested parties with the opportunity to comment on proposed revisions to the FHWA and FTA joint regulations that implement the National Environmental Policy Act (NEPA) and Section 4(f) of the Department of Transportation Act. The revisions are prompted by the enactment of the Moving Ahead for Progress in the 21st Century Act (MAP-21), which requires rulemaking to address programmatic approaches. This NPRM proposes to revise the FHWA/FTA Environmental Impact and Related Procedures and Parks, Recreation Areas, Wildlife and Waterfowl Refuges, and Historic Sites regulations due to MAP-21 changes to the environmental review process that FHWA and FTA have not previously captured in other rulemakings, such as the use of programmatic agreements and the use of single final environmental impact statement/record of decision documents. In addition, FHWA and FTA propose changes to the regulatory text to improve readability and to reflect current practice, consistent with an Executive order to improve regulations and regulatory review. The FHWA and FTA seek comments on the proposals contained in this notice.
Notice of Final Federal Agency Actions on Proposed Highway in Minnesota
This notice announces actions taken by FHWA that are final within the meaning of 23 U.S.C. 139(l)(1). The actions relate to a proposed highway project, United States Highway 53 between Virginia and Eveleth, in Saint Louis County in the State of Minnesota. Those actions grant licenses, permits, and approvals for the project.
Airworthiness Directives; REIMS AVIATION S.A. Airplanes
We are adopting a new airworthiness directive (AD) for REIMS AVIATION S.A. Model F406 airplanes. This AD revises AD 2015-16-07, which required inspection of the left-hand and right-hand rudder control pedal torque tubes, and, depending on findings, replacement with a serviceable part. This AD retains the actions of AD 2015-16-07 and adds additional acceptable serviceable replacement parts. The AD was prompted by reports of detachment of the pilot's rudder control pedal in flight. We are issuing this AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-8 series airplanes. This AD was prompted by a report of improperly installed outboard stowage bin modules in the passenger compartment found during maintenance. Further investigation revealed that certain attachment bracket bushings were missing or had moved out of the holes. This AD requires installing a spacer on the end of each quick-release pin that attaches the outboard stowage bin module to the lateral support tie rods of the main deck passenger compartment. We are issuing this AD to prevent detachment of the quick-release pin, which could result in separation of the lateral support tie rod and subsequent detachment of the module and consequent injuries to passengers or flightcrew.
Airworthiness Directives; Airbus Airplanes
We are adopting a new airworthiness directive (AD) for all Airbus Model A330-200, A330-200 Freighter, and A330-300 series airplanes; and Model A340-200 and A340-300 series airplanes. This AD was prompted by reports of cracked support strut body ends at a certain frame location of the trimmable horizontal stabilizer (THS). This AD requires repetitive inspections for cracking of the strut ends of the THS support located at a certain frame in the tail cone, and replacement if necessary; and reinstallation or installation of reinforcing clamps on certain strut ends. We are issuing this AD to detect and correct cracked support strut body ends of the THS, which could lead to the loss of all four THS support struts, making the remaining structure unable to carry limit loads, resulting in the loss of the horizontal tail plane.
Airworthiness Directives; The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-300, 747SR, and 747SP series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that certain fuselage skin lap joints are subject to widespread fatigue damage (WFD). This AD requires repetitive post-modification inspections for cracking of the skin or internal doubler along the edge fastener rows of the modification, and repair if necessary. We are issuing this AD to detect and correct fatigue cracking in certain fuselage skin lap joints, which could result in rapid depressurization of the airplane.
Airworthiness Directives; Zodiac Aerotechnics (Formerly Intertechnique Aircraft Systems)
We are adopting a new airworthiness directive (AD) for certain Zodiac Aerotechnics (formerly Intertechnique Aircraft Systems) flightcrew oxygen mask regulators as installed on, but not limited to, various transport and small airplanes. This AD was prompted by a report that improper maintenance on oxygen mask regulators was found. This AD requires the identification and replacement of all potentially affected units. This AD also requires installation of a placard and revision of the airplane flight manual to include an operational procedure for use in case of depressurization. We are issuing this AD to detect and correct affected oxygen mask regulators, which could lead to inadequate protection to the affected flightcrew against hypoxia. Hypoxia can start from a headache and drowsiness and lead eventually to unconsciousness with severe consequence in terms of airplane controllability.
Airworthiness Directives; Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Airplanes
We are superseding Airworthiness Directive (AD) 2011-09-04 for all Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Model 382, 382B, 382E, 382F, and 382G airplanes. AD 2011-09-04 required repetitive inspections for damage to the lower surface of the center wing box (CWB), and corrective actions if necessary. This new AD adds related investigative actions, and corrective actions if necessary. This AD was prompted by an evaluation by the design approval holder (DAH) that indicated that the CWB is subject to widespread fatigue damage (WFD). We are issuing this AD to detect and correct fatigue cracking of the lower surface of the CWB, which could result in structural failure of the wings.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.