Department of Transportation September 29, 2015 – Federal Register Recent Federal Regulation Documents

The Federal Transit Administration (FTA) received a request from the Los Angeles County Metropolitan Transportation Authority (LACMTA) for a Buy America non-availability waiver for the procurement of a proposed innovative electronic platform track intrusion system (PTIDS). LACMTA seeks to procure the PTIDS for research and testing purposes to determine whether such a system will help to increase rail safety by identifying obstacles in the right-of-way. PTIDS uses radar transponder technology, such as sensors, to detect intrusions on rail tracks. If an object is detected, the sensors immediately send notification to personnel who may then stop the train and take appropriate action. LACMTA seeks a waiver for the PTIDS because it contains twelve components, six of which only are available from a single source and currently are not manufactured in the United States. FTA is providing notice of the non-availability waiver request and seeks public comment before deciding whether to grant the request. If granted, the waiver only would apply to this one procurement of the specific PTIDS components identified in this waiver request, and not to any future procurement by LACMTA or others. FTA also is providing notice that it will conduct a supplier scouting search for domestic alternatives to the foreign components via the process described in this Notice.

FMCSA announces the charter renewal of the MCSAC, a Federal Advisory Committee that provides the Agency with advice and recommendations on motor carrier safety programs and motor carrier safety regulations through a consensus process. This charter renewal will take effect on October 1, 2015, and will expire after 2 years.

We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model MD-11 and MD-11F airplanes. This proposed AD was prompted by a report of fuel odor in the cabin. Fuel was found leaking from a cracked fuel line shroud in the left cargo compartment equipment tunnel. This proposed AD would require a check for the presence of fuel at the fuel shroud drain; a high frequency eddy current (HFEC) inspection for cracked fuel line shrouds; a pressure test of the drain system of the tail tank fuel shroud and a pressure test of the drain system of the aft fuselage fuel shroud to determine cracking; and corrective actions, if necessary. We are proposing this AD to detect and correct fuel leaking from a cracked fuel line shroud, which could result in fuel accumulation below the cargo compartment floor and consequent increased risk of fire.

This action proposes to establish Class E airspace at U.S. Coast Guard Station Neah Bay Heliport, Neah Bay, WA, to accommodate new Standard Instrument Approach Procedures for developed at the heliport. Controlled airspace is necessary for the safety and management of Instrument Flight Rules (IFR) operations at the heliport.

We are adopting a new airworthiness directive (AD) for Airbus Helicopters Model BO-105A, BO-105C, and BO-105S helicopters. This AD requires inspections to detect oil contamination in the main gearbox (MGB). This AD was prompted by initial findings from an accident investigation of a Model BO-105 helicopter, which indicated deterioration of the MGB caused by a contaminated oil supply. The actions of this AD are intended to detect oil contamination in the MGB, which could result in MGB deterioration, MGB failure, and subsequent loss of control of the helicopter.

We are superseding Airworthiness Directive (AD) 97-02-02 for certain Models SA26-AT, SA26-T, SA226-AT, SA226-T, SA226-T(B), SA226- TC, SA227-AC (C-26A), SA227-AT, SA227-BC (C-26A), SA227-CC, SA227-DC (C-26B), and SA227-TT airplanes. AD 97-02-02 required applying torque to the control column pitch bearing attaching nuts, inspecting the bearing assembly, inspecting the elevator control rod end bearing retainer/dust seals, and replacing or installing new parts as necessary. This new AD requires inspecting for movement and correct torque of the elevator control pivot bearing, inspecting the elevator control rod for damage and correct configuration, and replacing parts as necessary. This AD also requires a 10,000-hour time-in-service (TIS) repetitive replacement of the control column pivot bearing and elevator control rod bolt and requires replacement of the control column pivot bearing with the improved design by 35,000 hours TIS. This AD was prompted by loss of elevator control due to failure of the bolt attaching the elevator control rod to the elevator walking beam under the cockpit floor. We are issuing this AD to correct the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 787-8 airplanes. This AD was prompted by reports of a potential latent failure of the fuel shutoff valve actuator circuitry, which was not identified during actuator development. This AD requires replacing certain engine and auxiliary power unit (APU) fuel shutoff valve actuators with new actuators, and also requires revising the maintenance or inspection program to include a new airworthiness limitation into the Airworthiness Limitations Section (ALS) of the Instructions for Continued Airworthiness (ICA). We are issuing this AD to detect and correct latent failures of the fuel shutoff valve to the engine and auxiliary power unit (APU), which could result in the inability to shut off fuel to the engine and APU and, in case of certain fires, an uncontrollable fire that could lead to structural failure.