Department of Transportation March 28, 2007 – Federal Register Recent Federal Regulation Documents
Results 1 - 13 of 13
Use of Foreign-Flag Anchor Handling Vessels in the Beaufort Sea or Chukchi Sea Adjacent to Alaska
As authorized by Pub. L. 109-347, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to make determinations permitting the use of foreign-flag anchor handling vessels in certain cases (and for a limited period of time) if no U.S.-flag vessels are found to be suitable and reasonably available. A request for such a determination has been received by MARAD. If MARAD determines that U.S.-flag vessels are not suitable and reasonably available for the proposed service, a determination will be granted allowing for the conditional use of these vessels, within a set time frame. Those interested in providing the names of suitable and available vessels for the proposed service should refer to the docket number, and identify the U.S.-flag vessels available. A brief description of the proposed service of the vessels is listed below. A copy of the request may be accessed at https://dms.dot.gov under DOT docket number MARAD-2007-27710.
Petitions for Exemption; Summary of Petitions Received
Pursuant to FAA's rulemaking provisions governing the application, processing, and disposition of petitions for exemption part 11 of Title 14, Code of Federal Regulations (14 CFR), this notice contains a summary of certain petitions seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of any petition or its final disposition.
Airworthiness Directives; Airbus Model A330 and A340 Airplanes
The FAA proposes to supersede an existing airworthiness directive (AD) that applies to all Airbus Model A330-200, A330-300, A340-200, and A340-300 series airplanes; and Model A340-541 and A340- 642 airplanes. The existing AD currently requires operators to revise the Airworthiness Limitations section (ALS) of the Instructions for Continued Airworthiness (ICA) to incorporate new information. This information includes, for all affected airplanes, decreased life limit values for certain components; and for Model A330-200 and -300 series airplanes, new inspections, compliance times, and new repetitive intervals to detect fatigue cracking, accidental damage, or corrosion in certain structures. This proposed AD would revise the ALS, for all affected airplanes, by adding new Airworthiness Limitations Items (ALIs) to incorporate service life limits for certain items and inspections to detect fatigue cracking, accidental damage or corrosion in certain structures, in accordance with the revised ALS of the ICA. This proposed AD results from the issuance of new and more restrictive service life limits and structural inspections based on fatigue testing and in-service findings. We are proposing this AD to detect and correct fatigue cracking, accidental damage, or corrosion in principal structural elements, and to prevent failure of certain life-limited parts, which could result in reduced structural integrity of the airplane.
Airworthiness Directives; BAE Systems (Operations) Limited Model BAe 146 and Avro 146-RJ Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Proposed Agency Information Collection Activities; Comment Request
In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Requirements (ICRs) abstracted below have been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICRs describes the nature of the information collections and their expected burdens. The Federal Register notice with a 60-day comment period soliciting comments on the following collections of information was published on January 17, 2007 (72 FR 2084).
Notice of Informal Safety Inquiry
FRA is conducting an informal safety inquiry and technical conference to explore the safety implications associated with the use of a variety of safety-relevant technologies that while possibly providing significant efficiencies, may not be designed with failsafe characteristics. Such technologies might range from power-assisted switches historically used in yard operations being used on main tracks, switch position detection and indication in dark territory, to train-pacing software designed for fuel savings. FRA seeks to gain a better perspective on the use of such technology and the safety concerns that may be presented.
Airworthiness Directives; Boeing Model 747 Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 747 airplanes. This AD requires repetitive tests to detect hot air leaking from the trim air diffuser ducts or sidewall riser duct assemblies (collectively referred to in this AD as ``TADDs''), related investigative actions, and corrective actions if necessary. This AD also provides an optional terminating action for the repetitive tests. This AD results from reports of sealant deteriorating on the outside of the center wing fuel tank and analysis that sealant may deteriorate inside the tank due to excess heat from leaking TADDs. We are issuing this AD to prevent leakage of fuel or fuel vapors into areas where ignition sources may be present, which could result in a fire or explosion.
Airworthiness Directives; Boeing Model 737-300, -400, -500, -600, -700, -800 and -900 Series Airplanes; and Model 757-200 and -300 Series Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 737-300, -400, -500, -600, -700, -800 and -900 series airplanes; and Model 757-200 and -300 series airplanes. This AD requires modifying the activation mechanism in the chemical oxygen generator of each passenger service unit (PSU). This AD results from several reports indicating that some chemical oxygen generators failed to activate during in-flight decompression events. These failures were due to fracture of components between the passenger oxygen mask and the release pin in the oxygen generator. We are issuing this AD to prevent failure of the activation mechanism in the chemical oxygen generator, which could result in the unavailability of supplemental oxygen and possible incapacitation of passengers and cabin crew during an in- flight decompression.
Airworthiness Directives; Airbus Model A300 B4-600, B4-600R, and F4-600R Series Airplanes, and Model C4-605R Variant F Airplanes (Collectively Called A300-600 Series Airplanes)
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Model A300-600 airplanes. This AD requires an inspection to determine if certain spoiler actuators having certain part numbers are installed, and eventual replacement of all affected actuators. This AD results from failure of a distribution block, which was detected during fatigue qualification tests of certain spoiler actuators. We are issuing this AD to prevent failure of the distribution block, which could result in leakage of the hydraulic fluid that supplies those actuators. This failure could cause failure of one of the three spoiler actuators and the associated hydraulic circuits, which could result in loss of those hydraulic circuits and consequent reduced controllability of the airplane.
Airworthiness Directives; McDonnell Douglas Model MD-11 and -11F Airplanes
The FAA is adopting a new airworthiness directive (AD) for all McDonnell Douglas Model MD-11 and -11F airplanes. This AD requires revising the maintenance inspection program that provides for inspection of principal structural elements (PSEs) and replacement of safe-life parts, to incorporate a new revision to the MD-11 Airworthiness Limitations Instructions. The revision reduces inspection intervals for fatigue cracking of certain PSEs, and expands the inspection area for a certain other PSE. This AD results from a revised damage tolerance analysis. We are issuing this AD to detect and correct fatigue cracking of certain PSEs, which could adversely affect the structural integrity of the airplane.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.