Department of Transportation April 2005 – Federal Register Recent Federal Regulation Documents

As authorized by Pub. L. 105-383 and Pub. L. 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket 2005-20985 at https:// dms.dot.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Pub. L. 105- 383 and MARAD's regulations at 46 CFR Part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR Part 388.

As authorized by Pub. L. 105-383 and Pub. L. 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket 2005-20986 at https:// dms.dot.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Pub. L. 105- 383 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.

As authorized by Pub. L. 105-383 and Pub. L. 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket 2005-20988 at https:// dms.dot.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Pub. L. 105- 383 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.

As authorized by Pub. L. 105-383 and Pub. L. 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket 2005-20984 at https:// dms.dot.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Pub. L. 105- 383 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.

The Pipeline and Hazardous Materials Safety Administration's (PHMSA), formerly the Research and Special Programs Administration (RSPA), Office of Pipeline Safety (OPS) is granting Tractebel Power, Inc.'s (TPI) petition for a waiver of the pipeline safety regulations to employ a 1.0 longitudinal joint factor (LJF) for austenitic stainless steel pipe in its Tractebel Calypso Pipeline (TCP) project.

OPS will sponsor a 1\1/2\ day workshop to review the initial Integrity Management (IM) inspections of hazardous liquid pipeline operators. Workshop topics will cover the lessons learned, accomplishments, and future expectations for such programs from both the OPS and industry perspectives.

This document announces receipt by the National Highway Traffic Safety Administration (NHTSA) of a petition for a decision that 2001-2005 Mercedes Benz Sprinter trucks that were not originally manufactured to comply with all applicable Federal motor vehicle safety standards, are eligible for importation into the United States because (1) they are substantially similar to vehicles that were originally manufactured for sale in the United States and that were certified by their manufacturer as complying with the safety standards, and (2) they are capable of being readily altered to conform to the standards.

The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus Model A320 series airplanes. This proposed AD would require installing insulator and cable ties to the electrical cables of the S routes at the gaps in the raceway in the wing trailing edge and the wing tip and wing root areas. This proposed AD is prompted by the results of fuel system reviews conducted by the manufacturer. We are proposing this AD to prevent injection of high voltage current into the low voltage wiring that passes through the fuel tanks, which could result in a possible fuel tank explosion.

This notice announces the issuance of change 1 to Advisory Circular (AC) 23-21, Airworthiness Compliance Checklists Used to Substantiate Major Alterations for Small Airplanes. The most significant change is a revision in all locations to the signature required so the aircraft may be returned to service after major alteration. The Aviation Safety Inspector in the Flight Standards District Office must now sign instead of an Airframe and Powerplant mechanic. Other changes were minor.

On October 1, 1999, the FAA amended the regulations governing takeoff and landing slots and slot allocation procedures at certain High Density Traffic Airports as a result of the ``Open Transborder'' Agreement between the Government of the United States and the Government of Canada. One element of this final rule established that the deadline for submission of requests for international slots will be published in a Federal Register notice for each scheduling season. The purpose of the amendment is for the FAA deadline for international slots requests to coincide with the International Air Transport Association deadline for submission of international requests. In accordance with this amendment, the FAA announces in this notice that the deadline for submitting requests for international slots at John F. Kennedy International Airport (JFK) for allocation under 14 CFR 93.217 is May 12, 2005. Additionally, the FAA has designated Chicago's O'Hare International Airport (O'Hare) as a Level 2, Schedules Facilitated Airport under the IATA Guidelines. As such, the FAA requests carriers intening to conduct international service to O'Hare submit their intended schedules following the same procedures used for submitting requests for slots at JFK.

The FAA proposes to rule and invites public comment on the application to impose and impose and use a PFC at McCarran International Airport, and use the revenue of a PFC at McCarran International Airport, Henderson Executive Airport, and North Las Vegas Airport under the provisions of the Aviation Safety and Capacity Expansion Act of 1990 (Title IX of the Omnibus Budget Reconciliation Act of 1990) (Pub. L. 101-508) and part 158 of the Federal Aviation Regulations (14 CFR part 158).

The FAA adopts a new airworthiness directive (AD) for all Glaser-Dirks Flugzeugbau GmbH (DG Flugzeugbau) Model DG-800B sailplanes equipped with a SOLO 2625 engine or a Mid-West AE 50T engine. This AD requires you to modify the coolant pump and fuel pump electrical circuits, remove the non-resettable digital engine indicator (DEI) circuit breaker (4-ampere) and replace with a resettable 5-ampere circuit breaker, secure (for sailplanes with a SOLO 2625 engine) the choke butterfly valve axis, install edge protection at the sharp edges of the resettable 5-ampere DEI circuit breaker, and incorporate changes in the FAA-approved sailplane flight manual. This AD is the result of mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Germany. We are issuing this AD to prevent electrical failure of the fuel and coolant pumps if a non-resettable circuit breaker trips. This could result in power loss with the inability to restart the fuel pump during a critical phase of flight (for example, takeoff under own power).

The FAA is superseding an existing airworthiness directive (AD), which applies to certain McDonnell Douglas series airplanes. That AD currently requires repetitive inspections of the electrical connectors of the explosive cartridge wiring of the engine fire extinguisher containers to verify if the identification number labels are installed and legible; repetitive electrical tests of all explosive cartridge wiring of the engine fire extinguisher containers to verify proper installation and function; and corrective actions if necessary. This new AD requires an inspection of the emergency shut off wire assembly; installation of lanyards on the electrical connectors for the engine fire extinguishing agent containers and for the auxiliary power unit fire extinguishing agent containers if applicable; and related investigative/corrective actions, as applicable. This AD is prompted by reports of cross-wired electrical connectors of the engine fire extinguishing agent containers. We are issuing this AD to detect and correct cross-wired electrical connectors of the fire extinguishing system, which could release fire extinguishing agent into the incorrect engine nacelle in the event of an engine fire.

The FRA is issuing Safety Advisory 2005-02, which provides information on the potential catastrophic failure of locomotive main reservoir tanks manufactured by R&R Metal Fabricators, Incorporated, and installed on General Electric Transportation System (GETS) locomotives. The GETS has informed FRA that a total of 5,826 suspect main reservoir tanks were manufactured between 1988 and 1995. To date, four of these main reservoir tanks have failed catastrophically while in service, and additional tanks have been removed for leaking through the welded seams.

As authorized by Pub. L. 105-383 and Pub. L. 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket 2005 20990 at https:// dms.dot.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Pub. L. 105- 383 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.

As authorized by Pub. L. 105-383 and Pub. L. 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket 2005-20992 at https:// dms.dot.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Pub. L. 105- 383 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR part 388.

In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 seq.), this notice announces that the Information Collection abstracted below has been forwarded to the Office of Management and Budget (OMB) for review and approval. The nature of the information collection is described as well as its expected burden. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on January 13, 2005, and comments were due by March 14, 2005. No comments were received.

The Federal Aviation Administration (FAA) announces its determination that the noise exposure maps submitted by the City of Flagstaff for Flagstaff Pulliam Airport under the provisions of 49 U.S.C. 47501 et seq. (Aviation Safety and Noise Abatement Act) and 14 CFR part 150 are in compliance with applicable requirements.

The Federal Aviation Administration (FAA) announces its determination that the noise exposure maps submitted by Metropolitan Nashville Airport Authority for Nashville International Airport under the provisions of 49 U.S.C. 47501 et seq. (Aviation Safety and Noise Abatement Act) and 14 CFR part 150 are in compliance with applicable requirements.

On May 15, 1995, this agency granted in full General Motors Corporation's (GM) petition for exemption from the parts-marking requirements of the vehicle theft prevention standard for the Chevrolet Lumina and Monte Carlo vehicle line (see 60 FR 25938). On March 29, 1999, the agency granted in full GM's petition for modification of the previously approved antitheft device for the Chevrolet Lumina and Monte Carlo vehicle line. This notice (see 60 FR 25938) acknowledged GM's notification that the nameplate for its Chevrolet Lumina/Monte Carlo line would be changed to the Chevrolet Impala/Monte Carlo line beginning with model year (MY) 2000. This notice also grants in full GM's second petition to modify the exemption of the previously approved antitheft device for that line. NHTSA is granting GM's petition to modify the exemption because it has determined, based on substantial evidence, that the modified antitheft device described in GM's petition to be placed on the vehicle line as standard equipment, is likely to be as effective in reducing and deterring motor vehicle theft as compliance with the parts-marking requirements.

The FHWA is issuing this approved final nationwide programmatic Section 4(f) evaluation (programmatic evaluation) for use in certain Federal (Federal-aid or Federal Lands Highway) transportation improvement projects where the use of publicly owned property from a Section 4(f) park, recreation area, or wildlife and waterfowl refuge or property from a historic site results in a net benefit to the Section 4(f) property. The application of this programmatic evaluation is intended to promote environmental stewardship by encouraging the development of measures that enhance Section 4(f) properties and to streamline the Section 4(f) process by reducing the time it takes to prepare, review and circulate a draft and final individual Section 4(f) Evaluation (individual evaluation) that documents compliance with Section 4(f) requirements. This programmatic evaluation provides a procedural option for demonstrating compliance with the statutory requirements of Section 4(f) and is an addition to the existing nationwide programmatic evaluations, all of which remain in effect. This programmatic evaluation can be applied to specific project situations that fit the criteria contained in the Applicability section. To fully realize the streamlining benefits of this programmatic evaluation, the FHWA and the Applicant (defined later) are encouraged to initiate coordination with the official(s) with jurisdiction (defined later) over a Section 4(f) property as early as possible and practicable to facilitate the assessment of benefits and harm to a Section 4(f) property.

On April 5, 2000, the Wendell H. Ford Aviation Investment and Reform Act for the 21st Century (AIR-21) required DOT to provide a technical assistance manual to air carriers and individuals with disabilities concerning their rights and responsibilities under the Air Carrier Access Act and DOT regulations. Several years after the enactment of AIR-21, DOT received funding to develop the Technical Assistance Manual (TAM). This TAM responds to a Congressional mandate and incorporates input from stakeholders. The TAM is being published in the Federal Register to insure a full opportunity for public comment before the document is published in final form.

FRA proposes to correct an inadvertent, small omission from FRA Form 4 (``Boiler Specification Card'') in the Steam Locomotive Inspection and Maintenance Standards. The form is used to record information about inspections of steam locomotive boilers.

The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 737-600, -700, and -800 series airplanes. This AD requires doing a general visual inspection for sealant at the interface of the upper spar fittings, strut side skins, and the fittings of the thrust reverser strut fairing on the engine struts; and applying an injection seal or silicone sponge rubber with fillet seal if necessary. This AD is prompted by a report that an injection seal in the engine strut area may not have been properly completed or installed during production. We are issuing this AD to prevent flammable fluid (such as fuel or hydraulic fluid) from leaking onto a hot engine exhaust nozzle or into the engine core fire zone, and consequently causing an uncontrolled fire or explosion.