Foreign-Trade Zone 247; Application for Subzone; Cummins Inc.; Irvine, Pennsylvania, 106423 [2024-31247]
Download as PDF
Federal Register / Vol. 89, No. 249 / Monday, December 30, 2024 / Notices
the proper performance of the functions
of the Agency, including whether the
information will have practical or
scientific utility; (2) the accuracy of the
Agency’s estimate of the burden of the
collection of information, including the
validity of the methodology and
assumptions used; (3) ways to enhance
the quality, utility, and clarity of the
information to be collected; and (4)
ways to minimize the burden of the
collection of information on
respondents, including the use of
automated, electronic, mechanical, or
other technological collection
techniques or other forms of information
technology.
All comments received in response to
this notice, including names and
addresses when provided, will be a
matter of public record. Comments will
be summarized and included in the
submission request for Office of
Management and Budget for reapproval
of the ICR as revised.
JoLynn Anderson,
Liason.
DEPARTMENT OF COMMERCE
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
[S–224–2024]
Foreign-Trade Zone 247; Application
for Subzone; Cummins Inc.; Irvine,
Pennsylvania
An application has been submitted to
the Foreign-Trade Zones (FTZ) Board by
the Erie-Western Pennsylvania Port
Authority, grantee of FTZ 247,
requesting subzone status for the facility
of Cummins Inc., located in Irvine,
Pennsylvania. The application was
submitted pursuant to the provisions of
the Foreign-Trade Zones Act, as
amended (19 U.S.C. 81a–81u), and the
regulations of the FTZ Board (15 CFR
part 400). It was formally docketed on
December 20, 2024.
The proposed subzone (5.87 acres) is
located at 200 Murray Drive, Irvine,
Pennsylvania. No authorization for
production activity has been requested
at this time. The proposed subzone
would be subject to the existing
activation limit of FTZ 247.
In accordance with the FTZ Board’s
regulations, Juanita Chen of the FTZ
Staff is designated examiner to review
the application and make
recommendations to the Executive
Secretary.
Public comment is invited from
interested parties. Submissions shall be
Jkt 265001
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
SUMMARY: The U.S. Department of
Commerce (Commerce) determines that
sales of certain steel nails from the
United Arab Emirates were not made at
less than normal value during the
period of review (POR) May 1, 2022,
through April 30, 2023.
DATES: Applicable December 30, 2024.
FOR FURTHER INFORMATION CONTACT:
Olivia Woolverton or Brittany Bauer,
AD/CVD Operations, Office V,
Enforcement and Compliance,
International Trade Administration,
U.S. Department of Commerce, 1401
Constitution Avenue NW, Washington,
DC 20230; telephone: (202) 482–7452 or
(202) 482–3860, respectively.
SUPPLEMENTARY INFORMATION:
AGENCY:
Foreign-Trade Zones Board
ddrumheller on DSK120RN23PROD with NOTICES1
[FR Doc. 2024–31247 Filed 12–27–24; 8:45 am]
Certain Steel Nails From the United
Arab Emirates: Final Results of
Antidumping Duty Administrative
Review; 2022–2023
BILLING CODE 3411–15–P
23:58 Dec 27, 2024
Dated: December 20, 2024.
Elizabeth Whiteman,
Executive Secretary.
[A–520–804]
[FR Doc. 2024–31346 Filed 12–27–24; 8:45 am]
VerDate Sep<11>2014
addressed to the FTZ Board’s Executive
Secretary and sent to: ftz@trade.gov. The
closing period for their receipt is
February 10, 2025. Rebuttal comments
in response to material submitted
during the foregoing period may be
submitted through February 24, 2025.
A copy of the application will be
available for public inspection in the
‘‘Online FTZ Information Section’’
section of the FTZ Board’s website,
which is accessible via www.trade.gov/
ftz.
For further information, contact
Juanita Chen at juanita.chen@trade.gov.
Background
On June 11, 2024, Commerce
published the Preliminary Results and
invited interested parties to comment.1
This review covers two respondents:
Master Nails and Pins Manufacturing,
LLC/Middle East Manufacturing Steel
1 See Certain Steel Nails from the United Arab
Emirates: Preliminary Results of Antidumping Duty
Administrative Review, and Partial Recission; 2022–
2023, 89 FR 49150 (June 11, 2024) (Preliminary
Results), and accompanying Preliminary Decision
Memorandum.
PO 00000
Frm 00018
Fmt 4703
Sfmt 4703
106423
LLC (collectively, Master) and Rich Well
Steel Industries LLC (Rich Well).
On July 11, 2024, the petitioner 2
submitted two case briefs (one for issues
related to Master and another for issues
related to Rich Well),3 and on July 23,
2024, Master 4 and Rich Well 5
submitted rebuttal briefs. On July 22,
2024, Commerce tolled certain
deadlines in this administrative
proceeding by seven days.6 On
September 27, 2024, we extended the
deadline for these final results to
December 13, 2024.7 Additionally, on
December 9, 2024, Commerce tolled the
deadline to issue the final results in this
administrative review by 90 days.8
Accordingly, the deadline for these final
results is now March 13, 2025. For a
complete description of the events that
occurred since the Preliminary Results,
see the Issues and Decision
Memorandum.9 Commerce conducted
this administrative review in
accordance with section 751 of the
Tariff Act of 1930, as amended (the Act).
Scope of the Order 10
The products covered by this Order
are certain steel nails from the United
Arab Emirates. For a full description of
the scope, see the Issues and Decision
Memorandum.
Analysis of Comments Received
We addressed the issues raised in the
case and rebuttal briefs in the Issues and
Decision Memorandum. A list of the
issues addressed in the Issues and
Decision Memorandum is included in
the appendix to this notice. The Issues
and Decision Memorandum is a public
document and is on file electronically
2 The petitioner is Mid Continent Steel & Wire,
Inc.
3 See Petitioner’s Letters, ‘‘Case Brief {Master},’’
and ‘‘Case Brief {Richwell},’’ both dated July 11,
2024.
4 See Master’s Letter, ‘‘Rebuttal Brief of Master,’’
dated July 23, 2024.
5 See Rich Well’s Letter, ‘‘Rich Well Steel
Industries LLC Rebuttal to the Petitioner’s Case
Brief,’’ dated July 23, 2024.
6 See Memorandum, ‘‘Tolling of Deadlines for
Antidumping and Countervailing Duty
Proceedings,’’ dated July 22, 2024.
7 See Memorandum, ‘‘Extension of Deadline for
Final Results of Antidumping Duty Administrative
Review,’’ dated September 27, 2024.
8 See Memorandum, ‘‘Tolling of Deadlines for
Antidumping and Countervailing Duty
Proceedings,’’ dated December 9, 2024.
9 See Memorandum, ‘‘Issues and Decision
Memorandum for the Final Results of the
Antidumping Duty Administrative Review of
Certain Steel Nails from the United Arab Emirates;
2022–2023,’’ dated concurrently with, and hereby
adopted by, this notice (Issues and Decision
Memorandum).
10 See Certain Steel Nails from the United Arab
Emirates: Amended Final Determination of Sales at
Less Than Fair Value and Antidumping Duty Order,
77 FR 27421 (May 10, 2012) (Order).
E:\FR\FM\30DEN1.SGM
30DEN1
Agencies
[Federal Register Volume 89, Number 249 (Monday, December 30, 2024)]
[Notices]
[Page 106423]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2024-31247]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[S-224-2024]
Foreign-Trade Zone 247; Application for Subzone; Cummins Inc.;
Irvine, Pennsylvania
An application has been submitted to the Foreign-Trade Zones (FTZ)
Board by the Erie-Western Pennsylvania Port Authority, grantee of FTZ
247, requesting subzone status for the facility of Cummins Inc.,
located in Irvine, Pennsylvania. The application was submitted pursuant
to the provisions of the Foreign-Trade Zones Act, as amended (19 U.S.C.
81a-81u), and the regulations of the FTZ Board (15 CFR part 400). It
was formally docketed on December 20, 2024.
The proposed subzone (5.87 acres) is located at 200 Murray Drive,
Irvine, Pennsylvania. No authorization for production activity has been
requested at this time. The proposed subzone would be subject to the
existing activation limit of FTZ 247.
In accordance with the FTZ Board's regulations, Juanita Chen of the
FTZ Staff is designated examiner to review the application and make
recommendations to the Executive Secretary.
Public comment is invited from interested parties. Submissions
shall be addressed to the FTZ Board's Executive Secretary and sent to:
[email protected]. The closing period for their receipt is February 10,
2025. Rebuttal comments in response to material submitted during the
foregoing period may be submitted through February 24, 2025.
A copy of the application will be available for public inspection
in the ``Online FTZ Information Section'' section of the FTZ Board's
website, which is accessible via www.trade.gov/ftz.
For further information, contact Juanita Chen at
[email protected].
Dated: December 20, 2024.
Elizabeth Whiteman,
Executive Secretary.
[FR Doc. 2024-31247 Filed 12-27-24; 8:45 am]
BILLING CODE 3510-DS-P