Notice of Modification: China's Acts, Policies and Practices Related to Technology Transfer, Intellectual Property and Innovation, 76581-76614 [2024-21217]

Agencies

• Office of the United States Trade Representative

[Federal Register Volume 89, Number 181 (Wednesday, September 18, 2024)]
[Notices]
[Pages 76581-76614]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2024-21217]


=======================================================================
-----------------------------------------------------------------------

OFFICE OF THE UNITED STATES TRADE REPRESENTATIVE


Notice of Modification: China's Acts, Policies and Practices 
Related to Technology Transfer, Intellectual Property and Innovation

AGENCY: Office of the United States Trade Representative (USTR).

ACTION: Notice of modification of actions.

-----------------------------------------------------------------------

SUMMARY: In connection with the Four-Year Review of actions taken in 
the section 301 investigation of China's acts, policies, and practices 
related to technology transfer, intellectual property, and innovation, 
and in accordance with the specific direction of the President, the 
U.S. Trade Representative has determined to: modify the actions being 
taken in the investigation by imposing additional section 301 duties or 
increasing the rate of existing section 301 duties, on certain products 
of China in strategic sectors; propose increasing tariff rates for 
certain tungsten products, wafers, and polysilicon, with a public 
comment process to be set out via separate notice; provide a list of 
subheadings eligible for consideration of temporary exclusion under an 
exclusion process for certain machinery used in domestic manufacturing; 
and modify the actions to temporarily exclude from section 301 duties 
certain solar manufacturing equipment.

DATES: Tariff increases in 2024 are applicable with respect to products 
that are entered for consumption, or withdrawn from warehouse for 
consumption, on or after September 27, 2024. Tariff increases in 2025 
and 2026 are applicable with respect to products that are entered for 
consumption, or withdrawn from warehouse for consumption, on or after 
January 1 of the corresponding year. Exclusions for solar equipment 
included in Annex B are retroactive and applicable with respect to 
products that are entered for consumption, or withdrawn from warehouse 
for consumption, on or after January 1, 2024, and through May 31, 2025.

FOR FURTHER INFORMATION CONTACT: For general questions about this 
notice, contact Philip Butler and Megan Grimball, Chairs of the Section 
301 Committee at 202.395.5725. For specific questions on customs 
classification or implementation of the product exclusions, contact 
[email protected].

SUPPLEMENTARY INFORMATION:

[[Page 76582]]

A. Background

    On August 24, 2017, the U.S. Trade Representative initiated an 
investigation into certain acts, policies, and practices of the 
Government of China related to technology transfer, intellectual 
property, and innovation under section 301 of the Trade Act of 1974, as 
amended (Trade Act) (19 U.S.C. 2411). See 82 FR 40213. In a notice 
published on April 6, 2018, the U.S. Trade Representative determined 
that acts, policies, and practices of the Government of China related 
to technology transfer, intellectual property, and innovation were 
unreasonable or discriminatory, and burdened or restricted U.S. 
commerce, and thus were actionable under section 301(b) of the Trade 
Act (19 U.S.C. 2411(b)). See 83 FR 14906.
    Following a notice and comment process on the proposed action to be 
taken in the investigation, the U.S. Trade Representative took two 
actions under section 301 of the Trade Act: the July 6, 2018, action, 
covering an approximate annual trade value of $34 billion (List 1), and 
the August 23, 2018, action, covering an approximate annual trade value 
of $16 billion (List 2). See 83 FR 28710 (July 6, 2018, action) and 83 
FR 40823 (August 23, 2018, action). These actions subsequently were 
modified by imposing additional duties on supplemental lists of 
products, known as Lists 3 and 4, as well as by the temporary removal 
of duties on certain products through product exclusions.
    On May 5, 2022, USTR announced that under section 307(c)(2) of the 
Trade Act (19 U.S.C. 2417(c)(2)), the July 6, 2018, and August 23, 
2018, actions, as modified, were subject to possible termination on 
their respective four-year anniversary dates (i.e., July 6, 2022, and 
August 23, 2022) and of the opportunity for representatives of domestic 
industries that benefit from the trade actions to request continuation 
of the actions during the last 60 days of such four-year periods. See 
87 FR 26797.
    On September 8, 2022, USTR announced that the July 6, 2018 and the 
August 23, 2018 actions, as modified, would remain in effect because at 
least one representative of a domestic industry that benefits from each 
action submitted to the U.S. Trade Representative a request for 
continuation of the actions. See 87 FR 55073. The notice also announced 
that in accordance with section 307(c)(3) of the Trade Act (19 U.S.C. 
2417(c)(3)), the U.S. Trade Representative would conduct a review of 
the July 6, 2018 and the August 23, 2018 actions, as modified. See 87 
FR 55073.
    To aid in this review, on November 15, 2022, USTR opened a docket 
for interested persons to submit comments with respect to a number of 
considerations concerning the review. See 87 FR 62914. USTR received 
approximately 1,500 comments.
    Based on information obtained during the review, including the 
public comments, USTR, in consultation with the Section 301 Committee, 
prepared a comprehensive report that included findings on the 
effectiveness of the July 6, 2018 and the August 23, 2018 actions, as 
modified, in achieving the objectives of the investigation, other 
actions that could be taken, and the effects of such actions on the 
United States economy, including consumers. The report, Four-Year 
Review of Actions Taken in the Section 301 Investigation: China's Acts, 
Policies, and Practices Related to Technology Transfer, Intellectual 
Property, and Innovation (Report), was published on May 14, 2024, and 
is available on the USTR website.
    As detailed in the Report, the U.S. Trade Representative found 
that:
    [ssquf] The section 301 actions have been effective in encouraging 
China to take steps toward eliminating some of its technology transfer-
related acts, policies, and practices, and have reduced some of the 
exposure of U.S. persons and businesses to these technology transfer-
related acts, policies, and practices.
    [ssquf] China has not eliminated many of its technology transfer-
related acts, policies, and practices, which continue to impose a 
burden or restriction on U.S. commerce. Instead of pursuing fundamental 
reform, China has persisted, and even become more aggressive, 
particularly through cyber intrusions and cybertheft, in its attempts 
to acquire and absorb foreign technology, which further burden or 
restrict U.S. commerce.
    [ssquf] Economic analyses generally find that the duties have had 
small negative effects on U.S. aggregate economic welfare, positive 
impacts on U.S. production in the ten sectors most directly affected by 
the duties, and minimal impacts on economy-wide prices and employment.
    [ssquf] Economic analyses, including the principal U.S. Government 
analysis published by the U.S. International Trade Commission, 
generally find that the section 301 tariffs have contributed to 
reducing U.S. imports of goods from China and increasing imports from 
alternate sources, including U.S. allies and partners, thereby 
potentially supporting U.S. supply chain diversification and 
resilience.
    Based on the Report findings, the U.S. Trade Representative 
recommended to the President to maintain the section 301 tariffs on the 
covered products. To further encourage China to eliminate the 
investigated acts, policies, and practices, the U.S. Trade 
Representative also recommended enhancing the effectiveness of the 
tariff actions by adding or increasing section 301 tariffs on certain 
products in strategic sectors, including sectors targeted by China for 
dominance, or sectors where the United States recently made significant 
domestic investments. The U.S. Trade Representative found that 
``increasing or adding section 301 tariffs on products targeted by 
China for dominance will help encourage the elimination of investigated 
technology transfer-related acts, policies, and practices by 
encouraging alternative sourcing in strategic sectors of the economy, 
reducing U.S. reliance on China, while also reducing exposure to 
China's technology transfer-related acts, policies, and practices, and 
helping to maintain resilient, diverse, and secure supply chains.''
    On May 14, 2024, taking into consideration the U.S. Trade 
Representative's findings in the Report and recommendations, the 
President issued a Memorandum (President's Memorandum) that directed 
the U.S. Trade Representative to: ``maintain, as appropriate and 
consistent with this memorandum, the ad valorem rates of duty and lists 
of products subject to the [actions] taken under the section 301 
investigation'' and ``[t]o further encourage China to eliminate the 
acts, policies, and practices at issue, and to counteract the burden or 
restriction of these acts, policies, and practices, the Trade 
Representative shall modify the [actions taken in the investigation] to 
increase section 301 ad valorem rates of duty'' for certain specified 
products of China. See https://www.whitehouse.gov/briefing-room/presidential-actions/2024/05/14/memorandum-on-actions-by-the-united-states-related-to-the-statutory-4-year-review-of-the-section-301-investigation-of-chinas-acts-policies-and-practices-related-to-technology-transfer-intellectua/. In particular, the President's 
Memorandum specified categories of products for proposed tariff 
increases, tariff rates for those products, and year for tariff 
increases. With respect to tariff increases, the President directed 
increases on the following products:


[[Page 76583]]


 Battery parts (non-lithium-ion batteries)--Increase rate to 
25% in 2024
 Electric vehicles--Increase rate to 100% in 2024
 Facemasks--Increase rate to no less than 25% in 2024
 Lithium-ion electrical vehicle batteries--Increase rate to 25% 
in 2024
 Lithium-ion non-electrical vehicle batteries--Increase rate to 
25% in 2026
 Medical gloves--Increase rate to no less than 25% in 2026
 Natural graphite--Increase rate to 25% in 2026
 Other critical minerals--Increase rate to 25% in 2024
 Permanent magnets--Increase rate to 25% in 2026
 Semiconductors--Increase rate to 50% in 2025
 Ship-to-shore cranes--Increase rate to 25% in 2024
 Solar cells (whether or not assembled into modules)--Increase 
rate to 50% in 2024
 Steel and aluminum products--Increase rate to 25% in 2024
 Syringes and needles--Increase rate to no less than 50% in 
2024

    The President also directed the U.S. Trade Representative to 
establish a process by which interested persons may request that 
particular machinery used in domestic manufacturing classified within a 
subheading under Chapters 84 and 85 of the Harmonized Tariff Schedule 
of the United States (HTSUS) be temporarily excluded from section 301 
tariffs, and directed the U.S. Trade Representative to prioritize, in 
particular, exclusions for certain solar manufacturing equipment.
    Additionally, the White House released a statement further 
explaining how China's acts, policies, and practices have contributed 
to China's significant control of global production for the critical 
inputs necessary for U.S. technologies, infrastructure, energy, and 
healthcare and China's growing overcapacity and export surges, and how 
such control threatens U.S. supply chains and economic security. See 
https://www.whitehouse.gov/briefing-room/statements-releases/2024/05/14/fact-sheet-president-biden-takes-action-to-protect-american-workers-and-businesses-from-chinas-unfair-trade-practices/.

B. Proposed Modification to the Actions

    Consistent with the President's direction, USTR issued a Federal 
Register notice with proposed modifications. See 89 FR 46252 (May 28, 
2024) (May 28 notice). In the May 28 notice, the U.S. Trade 
Representative proposed increasing section 301 duties on 382 HTSUS 
subheadings and 5 statistical reporting numbers of the HTSUS, with an 
approximate annual trade value of $18 billion (2023). Additionally, the 
U.S. Trade Representative proposed subheadings eligible for 
consideration for temporary exclusion under a process by which 
interested persons may request that particular machinery used in 
domestic manufacturing and classified within certain subheadings under 
Chapters 84 and 85 of HTSUS be temporarily excluded. Finally, the U.S. 
Trade Representative proposed 19 temporary exclusions for solar 
manufacturing equipment. In accordance with section 307(a)(2) of the 
Trade Act (19 U.S.C. 2417(a)(2)), USTR invited comments from interested 
persons with respect to the proposed modifications, the scope of the 
machinery exclusion process, and the temporary exclusions for solar 
manufacturing equipment. USTR opened a 30-day docket on May 29, 2024.
    With respect to the proposed tariff increases, USTR requested 
commenters to address the effectiveness of the proposed modification, 
the effects of the proposed modification on the U.S. economy, including 
consumers, and whether the tariff subheadings or statistical reporting 
numbers identified for each product or sector adequately cover the 
products and sectors included in the President's direction to the U.S. 
Trade Representative. In addition, for facemasks, needles and syringes, 
and medical gloves, consistent with the President's direction to 
increase tariffs no less than specified rates, USTR requested comment 
on whether the rates of additional duty should be higher than the 
proposed rates, and with respect to facemasks, whether additional 
statistical reporting numbers under HTSUS subheading 6307.90.98 should 
be included.
    With respect to the machinery exclusion process, USTR requested 
comments on whether the subheadings proposed should or should not be 
eligible for consideration in the machinery exclusion process and 
whether certain subheadings under Chapters 84 and 85 that cover 
machinery used in domestic manufacturing were omitted and should be 
included. Finally, with respect to the 19 proposed solar manufacturing 
machinery exclusions, USTR requested comments on the scope of each 
exclusion, including suggested amendments to the product description.
    In response to the May 28 notice, USTR received more than 1,100 
comments. Of the comments received, approximately 420 comments 
expressed views about the proposed tariff increases on certain 
products, approximately 656 comments expressed views about the proposed 
subheadings eligible for consideration of temporary exclusions under an 
exclusion process for machinery used in domestic manufacturing, and 
approximately 80 comments expressed views about the proposed 19 
temporary exclusions for solar manufacturing equipment. The public 
submissions are available at https://comments.ustr.gov, docket number 
USTR-2024-0007.

C. Determination To Modify the Actions

    Pursuant to sections 307(c) and 307(a)(1) of the Trade Act (19 
U.S.C. 2417(c), (a)(1)), the U.S. Trade Representative may modify or 
terminate any action, subject to the specific direction, if any, of the 
President with respect to such action, that is being taken under 
section 301 if the burden or restriction on U.S. commerce of the acts, 
policies, and practices that are the subject of such action has 
increased or decreased, or such action is being taken under section 
301(b) and no longer is appropriate.
    As detailed in USTR's Report, modification of the action is 
warranted under section 307(a)(1)(B) as many of the technology 
transfer-related acts, policies, and practices described in the 
original section 301 Report persist and increasingly burden or restrict 
U.S. commerce. Rather than eliminate the technology transfer-related 
acts, policies, and practices that are the subject of the section 301 
investigation, the Report reviews how China has become more aggressive, 
particularly through cybertheft and cyber intrusions, in its attempts 
to acquire and absorb foreign technology and IP on a nonconsensual 
basis from U.S. companies, costing U.S. companies and consumers 
billions of dollars, and adding to the burden or restriction on U.S. 
commerce.
    Modification of the actions also is appropriate under section 
307(a)(1)(C). The term ``appropriate''' as used in subsection C refers 
to section 301(b), which requires the U.S, Trade Representative to 
``take all appropriate and feasible action authorized under [section 
301(c)] to obtain the elimination of [the] act, policy, or practice.'' 
The specific action that will obtain the elimination of an act, policy, 
or practice is a matter of predictive judgment, to be exercised by the 
U.S. Trade Representative, subject to any specific direction of the 
President. China's actions over the review period,

[[Page 76584]]

as discussed in USTR's Report has shown that maintaining the current 
action is no longer appropriate in order to induce China to eliminate 
its acts, policies, or practices.
    Modification of the actions is further warranted considering the 
findings in USTR's Report on the effectiveness of the prior actions in 
achieving the objectives of the investigation other actions that could 
be taken, and the effects of such actions on the U.S. economy, 
including consumers.
    The President has exercised his authority under section 307 to 
direct the U.S. Trade Representative to modify the actions being taken 
in the investigation. Specifically, as discussed above, the President 
directed the U.S. Trade Representative to increase the rates of duty 
for specified goods, with specified rates and timing. Additionally, the 
President directed the U.S. Trade Representative to establish an 
exclusion process for machinery used in domestic manufacturing 
classified within a subheading under Chapters 84 and 85 of the HTSUS 
and to prioritize, in particular, exclusions for certain solar 
manufacturing equipment.
    The modifications to the actions are set out in the Annexes to this 
notice. The U.S. Trade Representative's determination takes account of 
the public comments, the President's direction of May 14, 2024, the 
policy rationale underlying the President's direction, as well as the 
advice of the interagency section 301 committee and appropriate 
advisory committees.
    Section 301(c)(3)(B) of the Trade Act (19 U.S.C. 2411(c)(3)(B)) 
authorizes the U.S. Trade Representative to take action against any 
goods or economic sector of the foreign country concerned regardless of 
whether or not such goods or economic sector are involved in the act, 
policy, or practice subject to investigation. The modifications include 
increasing section 301 duties on 382 HTSUS subheadings and 7 
statistical reporting numbers of the HTSUS under 14 product groups. 
Additionally, the U.S. Trade Representative is modifying the actions to 
temporarily exclude from additional duties certain solar manufacturing 
equipment under 14 product specific exclusions.
    As outlined below, in consideration of public comments and the 
advice of the section 301 committee, the U.S. Trade Representative has 
made certain adjustments to the modifications proposed in May 28 
notice. The adjustments and the reasons for them are discussed below in 
USTR's response to significant comments.
    Annex A contains an informal table of the tariff increases under 
the 14 product groups specified by the President and the 382 
subheadings and 7 statistical reporting numbers, the tariff rates, and 
years for tariff increases. Annex B contains the 14 temporary 
exclusions for solar manufacturing equipment. Annex C contains the 
HTSUS modifications to impose additional duties, to increase rates of 
additional duties, and to exclude certain solar manufacturing equipment 
from additional duties. Annex D contains the Importer Certification for 
ship-to-shore cranes entering under the exclusion. Annex E contains a 
list of HTSUS subheadings eligible for consideration of temporary 
exclusion under the machinery exclusion process.
    Any product listed in the Annexes to this notice, which is subject 
to the additional duties imposed by this determination, and that is 
admitted into a U.S. foreign trade zone, except any product that is 
eligible for admission under ``domestic status'' as defined in 19 CFR 
146.43, only may be admitted as ``privileged foreign status,'' as 
defined in 19 CFR 146.41, effective as of the date that the additional 
duties are imposed. Products of China that are provided for in headings 
9903.91.01, 9903.91.02, and 9903.91.03, and listed in subdivisions (b), 
(c) and (d), respectively, of U.S. note 31 to subchapter III of chapter 
99 of the HTSUS, as well as products of China that are provided for in 
HTSUS subheading 9903.92.10, which are admitted into a U.S. foreign 
trade zone on or after 12:01 a.m. eastern daylight time on September 
27, 2024, only may be admitted as ``privileged foreign status.'' 
Products of China that are provided for in headings 9903.91.04 and 
9903.91.05, and listed in subdivisions (e) and (f) of U.S. note 31 to 
subchapter III of chapter 99 of the HTSUS that are admitted into a U.S. 
foreign trade zone on or after 12:01 a.m. eastern daylight time on 
January 1, 2025, only may be admitted as ``privileged foreign status.'' 
Products of China that are provided for in headings 9903.91.06, 
9903.91.07, and 9903.91.08, and listed in subdivisions (g), (h) and 
(i), respectively, of U.S. note 31 to subchapter III of chapter 99 of 
the HTSUS that are admitted into a U.S. foreign trade zone on or after 
12:01 a.m. eastern daylight time on January 1, 2026, only may be 
admitted as ``privileged foreign status.'' All such products will be 
subject upon entry for consumption to any ad valorem rates of duty or 
quantitative limitations related to the classification under the 
applicable HTSUS subheading.

D. USTR's Responses to Significant Comments

    As discussed above, in light of findings in USTR's Report, the U.S. 
Trade Representative recommended to the President that duties be added 
or increased on certain products in strategic sectors. The U.S. Trade 
Representative limited recommendations to the President to categories 
of products targeted by China for dominance and/or sectors where the 
U.S. recently made significant domestic investments, thus incentivizing 
China to eliminate the investigated acts, policies, and practices, and 
mitigating possible harm to the U.S. economy. The President agreed with 
the U.S. Trade Representative's recommendation and has exercised his 
authority to direct specific modifications to the actions being taken 
in the investigation.

Response to Significant Comments on Proposed Tariff Increases

    Battery Parts (Non-Lithium-ion Batteries): The President directed 
the U.S. Trade Representative to increase tariffs on battery parts for 
non-lithium-ion batteries to 25 percent in 2024. In response to the 
President's direction, the U.S. Trade Representative proposed 
increasing tariffs on one HTSUS subheading: 8507.90.40 (Parts of lead-
acid storage batteries, including separators therefor).
    The single comment on the proposed modification notes that broad 
tariffs have not significantly altered China's acts, policies, and 
practices and suggests that new U.S. initiatives, such as the Inflation 
Reduction Act would be more effective. Additionally, the comment notes 
that the proposed modifications will slow U.S. efforts to boost 
domestic production and adoption of electric vehicles.
    For the final determination, the U.S. Trade Representative has 
determined not to amend the proposed modification. As noted in USTR's 
Report, the proposed modifications complement the significant 
investments as a result of the Inflation Reduction Act and the 
Bipartisan Infrastructure Law into clean energy technology, clean 
energy supply chains, and clean energy manufacturing. Increasing 
section 301 duties on tariff lines covering certain sectors will help 
support these investments, encourage diversification away from Chinese 
sources, and provide additional leverage with China to eliminate the 
investigated acts, policies, and practices.
    Electric Vehicles: The President directed the U.S. Trade 
Representative to increase additional duties on electric

[[Page 76585]]

vehicles to 100 percent in 2024. In response to the President's 
direction, the U.S. Trade Representative proposed increasing duties on 
eight HTSUS subheadings.
    Some comments request that USTR narrow the scope of products 
covered by the eight subheadings by distinguishing between low-speed 
vehicles, such as passenger shuttles and mobility scooters, and higher 
speed passenger vehicles that operate on public roads and highways. 
While the comments urge the U.S. Trade Representative to distinguish 
between vehicles based on maximum speed or road readiness, the U.S. 
Trade Representative's proposal, consistent with Presidential 
direction, was intended to cover a wide range of electric motor 
vehicles that incorporate high-tech motors and batteries. The products 
included under the proposed subheadings meet the objective to target 
sophisticated technologies where China seeks dominance and where the 
individual products are part of the same continuum of products.
    One comment requests that electric buses that fulfill contracts 
executed prior to the proposed modification be excluded from the 
additional duties. Unlike with ship-to-shore cranes (discussed below), 
where multiple comments allege broad economic consequences, the single 
comment, when considering China's industrial policies targeting 
electric vehicles could threaten federal investment in the sector, does 
not demonstrate broad economic consequences such that an exclusion is 
warranted.
    Comments also request that USTR broaden the scope of products 
covered. One comment remarks that the proposed modifications do not 
adequately cover the full scope of products included in the President's 
direction because the proposal does not include motorcycles (including 
mopeds) and electric bicycles under HTSUS subheading 8711.60.00. 
Another comment asserts that the proposed modification should be 
expanded to include HTSUS subheading 8703.10.50 (golf carts and similar 
vehicles).
    With respect to motorcycles and electric bicycles, in reviewing the 
President's direction, the U.S. Trade Representative has determined 
that electric bicycles and motorcycles are distinct from what is 
traditionally understood as ``electric vehicles'' and fall outside the 
specific direction of the President. Similarly, electric golf carts and 
similar vehicles may be understood to fall outside the specific 
direction of the President. While these subheadings may include 
products with some overlapping technology to the subheadings covered, 
limiting the modification to the primary subheading covering 
traditional electric vehicles is most consistent with the President's 
direction.
    As a result of China's efforts to dominate the electric vehicles 
market, China now produces 70 percent of the world's electric cars--
jeopardizing productive investments elsewhere. The U.S. Trade 
Representative has determined that modification to increase the duties 
on electric vehicles will encourage diversification from Chinese 
sources, while also advancing U.S. policy to incentivize the 
development of, and investments in, a robust electric vehicle market, 
reducing exposure to China's technology transfer-related acts, 
policies, and practices, and providing additional leverage with China 
to eliminate the investigated acts, policies, and practices.
    Facemasks: The President directed the U.S. Trade Representative to 
increase tariffs on facemasks to no less than 25 percent in 2024. In 
response, the U.S. Trade Representative proposed three statistical 
reporting numbers. These included 6307.90.9845 (N95 Respirators of 
textiles); 6307.90.9850 (respirators of textiles, other than N95); and 
6307.90.9875 (face masks of textiles, other than disposable). USTR 
requested commenters to address whether additional statistical 
reporting codes under HTSUS subheading 6307.90.98 should be included 
and whether the tariff rates should be higher than the proposed 25 
percent rate.
    Several commenters note that as of January 1, 2023, statistical 
reporting number 6307.90.9845 (N95 Respirators of Textiles) was 
replaced with two statistical reporting numbers. For the final 
modifications, USTR has replaced statistical reporting number 
6307.90.9845 (N95 Respirators of Textiles) with statistical reporting 
numbers 6307.90.9842 (surgical N95 respirators) and 6307.90.9844 (other 
N95 respirators). This adjustment does not change the scope of the 
products covered.
    Other comments express concerns about the availability of facemasks 
outside of China and possible disruption to the supply of facemasks and 
higher costs for healthcare providers. As USTR found in the Report, 
increasing section 301 duties on certain personal protective equipment 
will help protect recent investments in increasing domestic production 
and in U.S. preparedness. As a result of those investments, the United 
States has, or is expected to have, sufficient domestic capacity. 
Several commenters agreed with this finding. Additionally, increasing 
tariffs on facemasks will encourage diversification away from China, 
improve supply chain resiliency, and create greater leverage with China 
to eliminate the investigated acts, policies, and practices.
    A number of comments suggest adding statistical reporting number 
6307.90.9870 (face masks of textile, disposable). Additional comments 
suggest adding textile subheadings that cover personal protective 
equipment, but not facemasks. Regarding the proposed tariff rate, 
several comments suggest rates higher than the proposed tariff rate, 
including 50 percent, 100 percent, and ``the highest rate possible.'' A 
few comments suggest that any rate increase be gradual due to possible 
limitations on availability outside of China.
    Considering the public comments, the advice of the Section 301 
Committee, and consistent with the President's direction, the U.S. 
Trade Representative has determined to add statistical reporting number 
6307.90.9870 (face masks of textile, disposable), but not to add 
additional textile subheadings that do not cover facemasks. 
Additionally, for most statistical reporting numbers, the U.S. Trade 
Representative has determined to increase tariff rates to 25 percent in 
2024 and to further increase rates in 2026 to 50 percent. Delaying the 
increase to 50 percent in 2026 is consistent with the President's 
direction, but balances requests for a rate higher than 25 percent with 
the public comments requesting that rates increase gradually. For 
statistical reporting number 6307.90.9870 (face masks of textile, 
disposable), the U.S. Trade Representative has determined to increase 
the tariff rate to 25 percent in 2025 and to further increase the rate 
in 2026 to 50 percent.
    Lithium-ion Batteries: The President directed the U.S. Trade 
Representative to increase tariffs on lithium-ion batteries to 25 
percent, with ``lithium-ion electrical vehicle batteries'' increasing 
in 2024 and ``lithium-ion non-electrical vehicle batteries'' increasing 
in 2026. In response, the U.S. Trade Representative proposed increasing 
tariffs on two statistical reporting numbers. One covers lithium-ion 
batteries for passenger vehicles (8507.60.0010), and a second covers 
lithium-ion batteries for a broad range of applications, including 
electric vehicles, other than passenger vehicles (8507.60.0020). The 
U.S. Trade Representative proposed increasing tariffs on 8507.60.0010 
(Lithium-ion batteries of a kind used as the primary source of 
electrical power for electrically powered vehicles of

[[Page 76586]]

subheadings 8703.40, 8703.50, 8703.60, 8703.70 or 8703.80) in 2024 and 
on 8507.60.0020 (Lithium-ion batteries: Other) in 2026.
    Several commenters request that additional codes be added, 
including for a subheading covering certain inputs or precursor 
materials used to manufacture lithium-ion batteries. Additionally, USTR 
received comments requesting that certain lithium-ion batteries covered 
by the proposed subheadings, but intended for a particular use, be 
excluded.
    The U.S. Trade Representative has determined that the requests to 
remove particular batteries are inconsistent with the President's 
direction, which broadly covers all lithium-ion batteries, and are 
inconsistent with the goals of diversifying supply chains and of 
reducing our reliance on China in an industry targeted by China for 
dominance. With respect to the inputs and precursor materials used in 
the production of lithium-ion batteries, these products are beyond the 
scope of the President's direction, which is limited to complete 
batteries.
    Medical Gloves: The President directed the U.S. Trade 
Representative to increase tariffs on medical gloves to no less than 25 
percent in 2026. In response, the U.S. Trade Representative proposed 
increasing tariffs to 25 percent in 2026 on one statistical reporting 
number.
    Comments opposing the proposed modification allege that increasing 
duties on medical gloves will raise medical care costs and impact 
patient care. Additional comments request that the increase in tariffs 
be delayed. Comments generally assert that the production of medical 
gloves is centralized in China and Malaysia, and that additional duties 
would push production to Malaysia, rather than to the United States. 
They also assert there is no large-scale domestic production capacity 
for nitrile gloves, specifically citing a January 2024 Made in America 
Act Waiver statement by Federal agencies concerning domestic 
availability of nitrile gloves.
    In general, comments supporting the proposed modification suggest 
that, given the artificially low prices of imports from China, the 
modification would be more effective if tariffs rates were increased to 
100 percent or higher, increased prior to 2026, and possibly increased 
gradually. One comment also suggested including gloves falling under 
HTSUS 4015.19 that are not for medical or surgical use.
    Considering the public comments, the specific direction of the 
President to increase tariffs on medical gloves no less than 25 percent 
in 2026, and the advice of the Section 301 Committee, particularly 
agencies involved in U.S. medical preparedness, the U.S. Trade 
Representative has determined to increase the rate of additional duties 
on medical gloves to 50 percent in 2025 and to 100 percent in 2026.
    The United States expects domestic production of nitrile gloves 
will increase over the next year, due in part to domestic investments 
for critical medical supplies, including medical gloves. Recent 
investments include CARES Act funding that aims to continue support of 
U.S. preparedness and of domestic production of critical medical 
supplies following the COVID pandemic. Increasing tariffs to 50 percent 
in 2025 will help protect those investments and will encourage 
diversification to sources other than China. While China currently 
accounts for a significant share of U.S. imports of nitrile gloves, the 
increasing availability from U.S. sources and third-country sources 
will provide the U.S. healthcare systems with alternative sourcing. An 
additional increase in tariff rates in 2026 is warranted, considering 
the expected increase in U.S. and third-country sources, and is 
responsive to those comments requesting a higher tariff, and will 
provide additional leverage with China to eliminate the investigated 
acts, policies, and practices.
    With respect to additional gloves that are not for medical or 
surgical use, these products are beyond the scope of the President's 
direction, which is limited to medical gloves. Accordingly, the U.S. 
Trade Representative has determined not to amend the proposed 
modification to include these products.
    Natural Graphite: The President directed the U.S. Trade 
Representative to increase tariffs on natural graphite to 25 percent in 
2026. In response to the President's direction, the U.S. Trade 
Representative proposed to increase tariffs on three subheadings 
covering three different forms of natural graphite.
    Most comments supported the proposed increase in tariffs, with some 
comments requesting a higher tariff rate than the proposed rate. 
Several of these comments also requested that certain additional inputs 
for lithium-ion batteries be included and treated similarly to natural 
graphite. The few comments opposing the additional duties generally 
assert that the proposed modifications would result in higher prices, 
would not be effective in obtaining the elimination of China's acts, 
policies, and practices, and could result in possible retaliation from 
China. China has targeted the processing of critical minerals to become 
the global leader in the critical minerals supply chains. Continued 
reliance on China for refining capacity of critical minerals, including 
natural graphite, leaves U.S. supply chains vulnerable and puts U.S. 
national security and clean energy goals at risk. Increasing the 
tariffs on natural graphite would encourage diversification away from 
China and would provide additional leverage with China to eliminate the 
investigated acts, policies, and practices. Tariffs would also protect 
U.S. investments in a sufficient domestic industrial base for natural 
graphite and would improve the resiliency of the U.S. battery supply 
chain.
    For these reasons, and considering the President's direction, and 
the advice of the Section 301 Committee, the U.S. Trade Representative 
has determined not to amend the proposed modifications.
    Other Critical Minerals: The President directed the U.S. Trade 
Representative to increase tariffs on certain critical minerals to 25 
percent in 2024. In response to the President's direction, the U.S. 
Trade Representative proposed increasing tariffs on 26 subheadings.
    The majority of comments opposing increases specifically oppose 
increasing tariffs on 2606.00.00 (aluminum ores and concentrates) and 
2849.90.30 (tungsten carbides). They assert limited availability of the 
minerals outside of China and higher costs. Other comments suggest the 
removal of five additional subheadings. Only three of these subheadings 
received more than one comment requesting removal: 8103.20.00 
(Tantalum, unwrought (including bars and rods obtained simply by 
sintering); tantalum powders); 8112.21.00 (Chromium, unwrought; 
chromium powders); and 8112.92.30 (Indium, unwrought; indium powders).
    The majority of comments supporting the proposed modifications 
specifically support increasing tariffs on the four subheadings 
covering tungsten products. These comments state that tariffs on 
various tungsten-related inputs will benefit domestic manufacturing by 
reducing domestic reliance on Chinese imports, establishing an 
independent domestic supply chain, and reducing Chinese access to the 
intellectual property and technologies of U.S. companies. Several 
comments emphasize the importance of tungsten-related inputs to various 
critical sectors, such as aerospace, automotive, defense, medical, and 
oil and gas sectors. Some of these comments request that the tariffs on 
tungsten-related products be increased to 50 percent.

[[Page 76587]]

    The remaining comments supporting higher tariffs cover various 
critical minerals; most support the higher tariffs to counteract 
China's dominance in the market and note that current tariff levels are 
insufficient. Most of these comments also note that higher tariffs will 
have a minimal impact on the domestic economy due to current 
availability of products from sources outside of China or availability 
from new sources. Comments also note that higher tariffs are critical 
to the new investments that help to diversify supply chains.
    In addition to supporting the proposed modifications, several 
comments also request that additional subheadings be added, including 
three subheadings covering additional tungsten products. Additional 
comments request the addition of certain uranium subheadings, as well 
as a subheading covering vanadium chlorides.
    Considering the public comments and the advice of the Section 301 
Committee, the U.S. Trade Representative has determined not to remove 
any subheadings. China has targeted the processing of critical minerals 
to become the global leader in the critical minerals supply chains for 
electric vehicle batteries, solar products, semiconductors, and other 
key products. The concentration of critical minerals mining and 
refining capacity in China leaves our supply chains vulnerable and puts 
our national security and clean energy goals at risk. Additionally, for 
many of the products with comments requesting removal, U.S. import data 
show that in recent years China has attempted to dominate supply chains 
by significantly increasing its share of imports. For these products, 
additional duties will help to maintain existing diversity in the 
supply chains and increase leverage with China to eliminate the 
investigated acts, policies, and practices. Regarding 2606.00.00 
(aluminum ores and concentrates), U.S. import data show that China's 
share is relatively small (less than 20 percent). While China's share 
of imports under statistical reporting number 2606.00.00.30 (bauxite, 
calcined: refractory grade) is more significant, Guyana, a second 
source, is almost as large as China, and higher tariffs may help to 
encourage greater diversification. Regarding 2849.90.30 (tungsten 
carbides), imports from China have increased significantly in recent 
years, but alternative sources remain. Increasing tariffs will support 
current supply chain diversity. Additionally, public comments note 
recent investments in domestic refining.
    The U.S. Trade Representative also has determined not to add 
certain proposed subheadings for uranium and vanadium chlorides. These 
subheadings are either already subject to section 301 tariffs of 25 
percent, or China's share of imports is small and declining. Regarding 
the three tariff subheadings covering tungsten products and requested 
for addition, the U.S. Trade Representative has determined to propose 
increasing tariff rates for these three subheadings to 25 percent. To 
that end, USTR will publish a separate notice with procedures for 
interested parties to provide views on increasing tariffs on 
subheadings: 8101.94.00 (Tungsten, unwrought (including bars and rods 
obtained simply by sintering)); 8101.99.10 (Tungsten bars and rods (o/
than those obtained simply by sintering), profiles, plates, sheets, 
strip and foil); and 8101.99.80 (Tungsten, articles nesoi).
    Permanent Magnets: The President directed the U.S. Trade 
Representative to impose tariffs of 25 percent on permanent magnets in 
2026. In response to the President's direction, the U.S. Trade 
Representative proposed additional duties on products under one 
subheading (8505.11.00).
    Several comments request that tariffs on permanent magnets not be 
increased, noting that permanent magnets are an intermediate good used 
in a variety of applications and products, including consumer goods. 
Citing a Department of Commerce report from 2023, comments assert 
limited availability of permanent magnets outside of China, including 
from domestic sources.
    Comments in support of the proposed modification highlight the 
vulnerability of the U.S. economy and national security as a result of 
our continued reliance on China for permanent magnets, and in 
particular NdFeB, which are critical for electric vehicle motors (an 
area where China seeks dominance), as well as defense applications. The 
comments assert that the potential impact on U.S. consumers from the 
proposed modification would be minimal, as permanent magnets generally 
account for a low percentage of the total cost of final goods.
    Considering the comments and the advice of the Section 301 
Committee, and consistent with the President's direction, the U.S. 
Trade Representative has determined to impose additional tariffs on 
products falling under subheading 8505.11.00. The 2023 Department of 
Commerce report indicates that at the time of the report the demand for 
permanent magnets outpaced domestic manufacturing capacity, but the 
report also notes federal investments and other efforts in support of 
reestablishing domestic production capacity, as well as plans for three 
U.S.-headquartered firms to establish U.S. NdFeB magnet manufacturing 
facilities by 2026. Increasing tariffs on permanent magnets in 2026 
accounts for the current limited availability of permanent magnets 
outside of China, complements the upcoming investments in domestic 
production, and further encourages domestic investments.
    Semiconductors: The President directed the U.S. Trade 
Representative to increase tariffs on semiconductors to 50 percent in 
2025. In response to the President's direction, the U.S. Trade 
Representative proposed increasing tariffs on 16 subheadings.
    Several comments highlight the importance of semiconductors in a 
variety applications and critical sectors, including the healthcare and 
solar industries. Comments note that following the enactment of the 
Creating Helpful Incentives to Produce Semiconductors (CHIPS) and 
Science Act in 2022, the United States has made progress in investing 
in domestic production and in recapturing semiconductor manufacturing 
from China's dominance. Comments also assert that imports from China 
undermine that progress and the incentives under the CHIPS Act. 
Comments assert that the tariffs have helped to stimulate domestic 
manufacturing, support supply chain resiliency, and reduce our 
dependence on China. One comment suggests broadening the modifications 
to capture semiconductors entering the United States in downstream 
products.
    Comments opposing the increase in tariffs on semiconductors 
primarily comment on the financial impact of the tariffs on U.S. 
companies and the U.S. economy. These commenters assert that the 
increased duties will increase domestic manufacturing costs, will be 
passed on to consumers, will contribute to domestic inflation, and will 
reduce the competitiveness of U.S. products in the global market. 
Comments also state that increased manufacturing costs may encourage 
U.S. companies to move manufacturing out of the United States to third 
countries.
    Aside from advocating for the removal of the tariffs, comments 
opposing the tariffs also propose several alternatives to increased 
duties. One commenter argues that an effective alternative to the 
tariffs would be bilateral policy discussions between the United States 
and China. Another commenter suggests additional programs that 
strengthen domestic manufacturing, such as under

[[Page 76588]]

the CHIPS and Science Act and the Inflation Reduction Act, would be 
more effective than imposing higher tariffs. Alternatively, the same 
commenter suggests a longer transition time to allow for additional 
manufacturing, noting that CHIPS funding has yet to be fully disbursed 
and it may take several years before domestic semiconductors will be 
available. Some comments request the removal of certain subheadings. 
They generally assert that the tariffs would increase prices and harm 
domestic manufacturing. One comment asserts that the tariffs are 
counterproductive to the Administration's goals to increase domestic 
production of electric vehicles.
    Considering the public comments, the advice of the Section 301 
Committee, and consistent with the direction of the President, the U.S. 
Trade Representative has determined that excluding particular products 
or subheadings is not warranted. China has targeted the semiconductor 
sector for dominance and is rapidly expanding its capacity, 
particularly for foundational semiconductors. Through the CHIPS and 
Science Act, the United States is making a nearly $53 billion 
investment in American semiconductor manufacturing capacity, research, 
innovation, and workforce. This investment will encourage 
diversification to alternative sources, providing additional leverage 
with China to eliminate the investigated acts, policies, and practices, 
and will help counteract decades of disinvestment and offshoring that 
has reduced the United States' capacity to manufacture semiconductors 
domestically. Raising the tariff rate on semiconductors is an important 
initial step to complement the sustainability of these investments. 
Accordingly, the U.S. Trade Representative has determined to increase 
tariffs on the 16 proposed subheadings.
    Ship-to-shore cranes: The President directed the U.S. Trade 
Representative to increase tariffs on ship-to-shore cranes to 25 
percent in 2024. In response to the President's direction, the U.S. 
Trade Representative proposed increasing tariffs on certain ship-to-
shore cranes (transporter cranes, gantry cranes, and bridge cranes) 
under subheading 8426.19.00.
    In addressing the effectiveness and impact of the proposed tariff 
increase, a number of commenters assert that because the lead time for 
purchasing ship-to-shore cranes is often more than two years, the 
additional duties would increase costs significantly on purchases 
contracted for well before the proposed modification. Additionally, due 
to purchase contracts, the increased tariffs would not be effective in 
obtaining the elimination of, or in counteracting China's acts, 
policies, and practices and would broadly impact U.S. ports and the 
U.S. economy. The majority of comments suggest delaying the additional 
duties until 2026 to allow cranes under contracts executed prior to the 
announced proposed modifications to enter without the section 301 
duties.
    Considering the possible broad economic impact discussed in the 
comments, and consistent with the President's direction, the U.S. Trade 
Representative has determined to increase duties on ship-to-shore 
cranes in 2024, but will allow for exclusions for cranes that fulfill 
contracts executed prior to May 14, 2024, and that enter the United 
States prior to May 14, 2026. The exclusion balances the possible 
impact on the U.S. economy with the security interests of the United 
States from the threat of Chinese state-sponsored cyber intrusions of 
critical infrastructure.
    Ship-to-shore gantry cranes, configured as a high- or low-profile 
steel superstructure and designed to unload intermodal containers from 
vessels with coupling devices for containers, including spreaders or 
twist-locks (provided for in subheadings 8426.19.00), will be exempt, 
provided: (1) they are fulfilling in whole or in part an executed 
contract for sale dated prior to May 14, 2024, for goods that are 
entered for consumption, or withdrawn from warehouse for consumption, 
in the United States prior to May 14, 2026, and (2) the importer 
completes the certification in Annex D to this notice and provides the 
completed certification as part of the importer's electronic entry 
summary to U.S. Customs and Border Protection by uploading it to the 
Document Imaging System in the Automated Commercial Environment at the 
time that classification is declared under heading 9903.91.09 of the 
HTSUS.
    Solar Cells (whether or not assembled into modules): The President 
directed the U.S. Trade Representative to increase tariffs on solar 
cells to 50 percent in 2024. In response to the President's direction, 
the U.S. Trade Representative proposed increasing tariffs on two 
subheadings.
    Comments supporting the tariff increases assert that the tariffs 
are critical to counter China's unfair policies and practices that 
target the solar industry. They note that China has invested in the 
long-term dominance of the global solar supply chain, which has 
resulted in limited alternatives and increasing dependence on Chinese 
suppliers. The comments assert that increasing the tariffs will allow 
the burgeoning domestic industry to compete, creating a more resilient 
domestic supply chain, improving U.S. energy security, and promoting 
clean energy initiatives.
    Comments also note that initiatives, such as the Inflation 
Reduction Act and the CHIPS and Science Act, provide critical 
incentives to the shift solar supply chains to the United States, but 
these incentives are threatened by solar imports from China. Two 
comments suggest that additional subheadings be added to cover certain 
inputs used in manufacturing solar cells. The two subheadings are: 
2804.61.00 (Silicon containing by weight not less than 99.99 percent of 
silicon); and 3818.00.00 (Chemical elements doped for use in 
electronics, in the form of discs, wafers etc., chemical compounds 
doped for electronic use).
    There were no comments opposing the proposed subheading, but one 
comment requested that a statistical reporting number under one of the 
subheadings be excluded (8541.43.0010). The commenter asserts that the 
products covered by the statistical reporting number should be excluded 
because they are not the subject of technology-transfer agreements and 
increasing the tariffs will result in higher prices.
    Considering the comments, and the advice of Section 301 Committee, 
and consistent with the direction of the President to increase tariffs 
on solar cells (whether or not assembled into modules), the U.S. Trade 
Representative has determined that removing statistical reporting 
number 8541.43.0010 is not warranted merely because it has not been 
subject to China's acts, policies, and practices or may result in 
higher prices. See section 301(c)(3)(B) of the Trade Act (19 U.S.C. 
2411(c)(3)(B)).
    Regarding the request to add subheadings 2804.61.00 and 3818.00.00, 
the U.S. Trade Representative has determined to propose increasing 
tariff rates for these two subheadings to 50 percent. The polysilicon 
and wafers that are imported under these two subheadings are critical 
for manufacturing solar cells and semiconductors. As noted in USTR's 
Report, China now dominates manufacturing capacity for polysilicon and 
wafers, accounting for 93 percent of polysilicon manufacturing capacity 
and 95 percent of wafer capacity. China's dominance in the 
manufacturing of wafers and polysilicon is likely to undermine new 
investments in domestic manufacturing, impede the resiliency of U.S. 
supply chains for solar

[[Page 76589]]

cells and semiconductors, and undermine the effectiveness of the 
tariffs on solar cells and semiconductors. Accordingly, USTR will 
publish a separate notice with procedures for interested parties to 
provide views on increasing tariffs on subheadings: 2804.61.00 (Silicon 
containing by weight not less than 99.99 percent of silicon); and 
3818.00.00 (Chemical elements doped for use in electronics, in the form 
of discs, wafers etc., chemical compounds doped for electronic use).
    Increasing tariffs on the two proposed subheadings will encourage 
the diversification of supply chains and will lessen dependence on 
China for these products, providing additional leverage with China to 
eliminate the investigated acts, policies, and practices. The tariffs 
also complement other Administration goals that seek to defend the 
United States against China's policy-driven non-market excess capacity, 
which has led to extreme concentration of production in China and 
underpriced exports. Accordingly, the U.S. Trade Representative has 
determined to increase tariffs on the two proposed subheadings.
    Steel and Aluminum: The President directed the U.S. Trade 
Representative to increase tariffs on steel and aluminum products to 25 
percent in 2024. In response to the President's direction, the U.S. 
Trade Representative proposed increasing or adding tariffs on 321 steel 
and aluminum subheadings in 2024.
    The 321 subheadings are within the scope of products subject to 
additional duties under section 232 of the Trade Expansion Act of 1962, 
as amended, but are not currently subject to 25 percent duties under 
section 301. Increasing or adding duties to these 321 subheadings would 
make nearly all of the steel and aluminum subheadings that are within 
the scope of the section 232 investigations of steel and aluminum 
subject to 25 percent duties under section 301and will reduce 
opportunities for circumvention, making the actions more effective. 
USTR did not propose adding or increasing section 301 duties on 17 
subheadings within the scope of products covered by section 232. Data 
from the Department of Commerce's section 232 exclusion process show 
that a majority of exclusions requested for products under the 17 
subheadings were granted, and there is limited availability for the 
products outside of China.
    Several commenters suggest USTR include additional tariff codes 
covering upstream and downstream products related to steel and 
aluminum, but outside the scope of the section 232 investigations. The 
U.S. Trade Representative has determined not to add subheadings outside 
the scope of the section 232 investigations on steel and aluminum and 
has determined that it is appropriate to use the same scope of products 
covered by the section 232 investigations that were defined by 
Presidential proclamation. See Proclamation 9704 of March 8, 2018 
(Adjusting Import of Aluminum into the United States), and Proclamation 
9705 of March 8, 2018 (Adjusting Imports of Steel into the United 
States).
    Some commenters suggest USTR include the 17 subheadings covered by 
the section 232 investigations that were not proposed for tariff 
increases. Under the Department of Commerce's exclusion process for 
section 232 products, products are granted exclusion either where they 
are not produced in the United States in sufficient and reasonably 
available amounts, or where there is a specific national security 
consideration. As noted above, for products under these 17 subheadings, 
Commerce granted exclusions, and data indicates that these products 
have limited availability outside of China. Accordingly, the U.S. Trade 
Representative has determined that it would not be appropriate to 
increase tariffs on these 17 subheadings.
    Syringes and needles: The President directed the U.S. Trade 
Representative to increase tariffs on syringes and needles to no less 
than 50 percent. In response to the President's direction, the U.S. 
Trade Representative proposed increasing tariffs on two subheadings. 
USTR requested commenters to address whether the tariff rate should be 
higher than the proposed rate.
    Regarding the proposed rate, several comments suggest that higher 
rates would help support domestic manufacturing and recommended rates 
as high as 100 percent. Most comments opposing the proposed increase 
simply note that prices would likely increase. However, a large number 
of comments report a limited availability of enteral syringes outside 
of China and assert that the proposed increase would impact the supply 
of enteral syringes, which are necessary for vulnerable patients. These 
comments request that enteral syringes be excluded.
    Considering the comments and the advice of Section 301 Committee, 
and recognizing that syringes and needles are critical to U.S. 
preparedness in responding to public health emergencies and the need to 
maintain alternative sources, consistent with the President's 
direction, the U.S. Trade Representative has determined to increase 
tariffs on syringes and needles under the two subheadings to 100 
percent in 2024. To address the possible shortages of enteral syringes, 
the U.S. Trade Representative has determined to exclude enteral 
syringes through January 1, 2026.

USTR's Response to Significant Comments on Machinery Exclusion Process

    The President directed the U.S. Trade Representative to establish a 
process by which interested persons may request that particular 
machinery used in domestic manufacturing classified within a subheading 
under Chapters 84 and 85 of the HTSUS be temporarily excluded from 
section 301 tariffs, and to prioritize, in particular, exclusions for 
certain solar manufacturing. In response to the President's direction, 
the U.S. Trade Representative proposed 312 subheadings eligible for 
consideration of temporary exclusion, and proposed 19 temporary 
exclusions for solar manufacturing equipment.
    Chapters 84 and 85 of the HTSUS cover most machinery used in 
manufacturing processes. The 312 subheadings proposed, include machines 
used to physically alter a good in the manufacturing process. The 
limited scope of the exclusion process strikes a balance between 
mitigating U.S. companies' costs in expanding domestic production 
capacity while maintaining the appropriate amount of leverage with 
China to encourage China to eliminate the acts, policies, and practices 
that are the subject of the investigation.
    In response to USTR's request for comments on whether the 312 
subheadings proposed should or should not be eligible in the machinery 
exclusion process and whether certain subheading under Chapters 84 and 
85 that cover machinery used in domestic manufacturing were omitted and 
should be included, USTR received more than 650 comments, with 
approximately half of the comments proposing additional subheadings 
under Chapters 84 and 85. The remaining comments either opposed 
including certain subheadings, supported proposed subheadings, or 
proposed subheadings not under Chapters 84 and 85.
    Considering the comments, and the advice of the Section 301 
Committee, and consistent with the direction of the President, the U.S. 
Trade Representative has determined to add five additional subheadings 
to be eligible for consideration of temporary exclusions. These five 
subheadings are: 8421.21.00 (Machinery and apparatus for filtering or 
purifying water); 8421.29.00 (Filtering or purifying machinery and

[[Page 76590]]

apparatus for liquids, nesoi); 8421.39.01 (Filtering or purifying 
machinery and apparatus for gases, other than intake air filters or 
catalytic conv. for internal combustion engines); 8428.70.00 
(Industrial robots); and 8443.19.30 (Printing machinery, nesoi). These 
subheadings appear to include machinery used to physically alter goods 
in the manufacturing process.
    Consistent with the President's direction, the U.S. Trade 
Representative has determined not to add subheadings outside of 
Chapters 84 and 85 or subheadings that only include parts, accessories, 
consumables, or general equipment that is unable to physically change a 
good. Additionally, the U.S. Trade Representative has determined not to 
remove any of the proposed subheadings. Comments requesting that 
subheadings be removed generally assert that machines covered by the 
subheading were available from sources outside of China. Under the 
exclusion process, commenters both supporting and opposing particular 
exclusions for machines under any of these subheadings will have an 
opportunity to provide their views. This will provide USTR with greater 
opportunity to gather more specific information about the machinery 
requested for exclusion, including the availability of products outside 
of China.

Nineteen Proposed Solar Manufacturing Equipment Exclusions

    The President directed the U.S. Trade Representative to prioritize 
exclusions for certain solar manufacturing equipment. In response to 
the President's direction, the U.S. Trade Representative proposed 19 
exclusions covering solar manufacturing equipment. The exclusions 
included five exclusions for equipment to manufacture solar modules, 
six exclusions for equipment to manufacture solar cells, and eight 
exclusions for equipment to manufacture solar wafers.
    USTR received several comments requesting that the exclusions for 
solar manufacturing equipment be made effective prior to May 28, 2024. 
USTR received a number of comments opposing the exclusions based on the 
assertion that certain equipment is available from alternative sources. 
Specifically, with respect to the five exclusions for solar module 
manufacturing equipment and the six exclusions for solar cell 
manufacturing equipment, a number of comments assert that alternative 
sources for the machinery are available, both domestically and in 
Europe. Several comments noted that excluding Chinese equipment would 
disincentivize companies to purchase from alternative sources and 
negatively impact burgeoning supply chains. Comments supporting the 
exclusions focus primarily on Chinese equipment being low-cost 
equipment, but some also assert that China is the only source for most 
solar equipment.
    Considering the public comments, the specific direction of the 
President to prioritize exclusions for solar equipment, and the advice 
of the Section 301 Committee, particularly agencies involved in efforts 
to build capacity for domestic production of solar products, the U.S. 
Trade Representative has determined not to adopt the five exclusions 
covering solar manufacturing equipment for modules. Available 
information indicates that there is sufficient availability of the 
products covered by the exclusions outside of China, such that the 
exclusions are not warranted and could harm alternative sourcing 
currently available.
    Regarding proposals to temporarily exclude wafer and cell 
manufacturing equipment, the U.S. Trade Representative has determined 
to adopt the 14 exclusions for this manufacturing equipment. There is 
limited information regarding the availability and pricing of the cell 
manufacturing equipment covered by these exclusions outside of China, 
but some of the risks of granting the exclusions are mitigated by the 
short prospective duration of the exclusions. The exclusion period will 
allow for the development of strategies to reduce U.S. reliance on 
Chinese cell manufacturing equipment, and for greater supply chain 
resilience and enhanced domestic manufacturing more generally. 
Regarding the wafer manufacturing equipment, available information 
indicates that alternative sources do not currently have sufficient 
supply of the equipment covered by these exclusions. Regarding requests 
for a longer retroactive period for the exclusions for solar 
manufacturing equipment, the U.S. Trade Representative has determined 
to make the exclusions effective January 1, 2024, and through May 31, 
2025. The additional time will support those investments in domestic 
production that were made in 2024, but prior to USTR's announced 
proposals. With the goal of reducing reliance on China, and to ensure 
that imports under the exclusions support both greater domestic 
production of solar products and supply chain resilience, USTR will 
actively monitor imports under the 14 temporary exclusions. 
Additionally, based on the public comments, the U.S. Trade 
Representative has made certain amendments to the proposed product 
descriptions for the exclusions. The final product descriptions for the 
adopted exclusions are included in Annex B of this notice.
    The U.S. Trade Representative will continue to consider the actions 
taken in this investigation. In the event that further modifications 
are appropriate, the U.S. Trade Representative intends to take into 
account the extensive public comments provided in response to the May 
28 notice.

Juan Millan,
Acting General Counsel, Office of the United States Trade 
Representative.

Annex A--Tariff Increases

----------------------------------------------------------------------------------------------------------------
               HTSUS subheading                           Product description             Rate (%)      Timing
----------------------------------------------------------------------------------------------------------------
                                    Battery Parts (Non-lithium-ion Batteries)
----------------------------------------------------------------------------------------------------------------
8507.90.40....................................  Parts of lead-acid storage batteries,            25         2024
                                                 including separators therefor.
----------------------------------------------------------------------------------------------------------------
                                                Electric Vehicles
----------------------------------------------------------------------------------------------------------------
8702.40.31....................................  Motor vehicles w/electric motor, to             100         2024
                                                 transport 16 or more persons, incl
                                                 driver.
8702.40.61....................................  Motor vehicles w/electric motor, to             100         2024
                                                 transport 10 to 15 persons, incl
                                                 driver.
8702.90.31....................................  Motor vehicles nesoi, to transport 16           100         2024
                                                 or more persons, incl driver.
8702.90.61....................................  Motor vehicles nesoi, to transport 10           100         2024
                                                 to 15 persons, incl driver.
8703.60.00....................................  Motor vehicles to transport persons, w/         100         2024
                                                 spark-ign. IC recip. piston engine &
                                                 elec motor capable of charge by plug
                                                 to external source.
8703.70.00....................................  Motor vehicles to transport persons, w/         100         2024
                                                 diesel engine & elec motor capable of
                                                 charge by plug to external source.

[[Page 76591]]

 
8703.80.00....................................  Motor vehicles to transport persons, w/         100         2024
                                                 electric motor for propulsion.
8703.90.01....................................  Motor vehicles to transport persons,            100         2024
                                                 nesoi.
----------------------------------------------------------------------------------------------------------------
                                                    Facemasks
----------------------------------------------------------------------------------------------------------------
6307.90.9842..................................  Surgical N95 Respirators of Textile...           25         2024
                                                                                                 50         2026
6307.90.9844..................................  Non-surgical N95 Respirators of                  25         2024
                                                 Textiles.                                       50         2026
6307.90.9850..................................  Respirators of Textiles, Other than              25         2024
                                                 N95.                                            50         2026
6307.90.9870..................................  Face Masks of Textiles, Disposable....           25         2025
                                                                                                 50         2026
6307.90.9875..................................  Face Masks of Textiles, Other than               25         2024
                                                 Disposable.                                     50         2026
----------------------------------------------------------------------------------------------------------------
                                    Lithium-ion Electrical Vehicle Batteries
----------------------------------------------------------------------------------------------------------------
8507.60.0010..................................  Lithium-ion batteries of a kind used             25         2024
                                                 as the primary source of electrical
                                                 power for electrically powered
                                                 vehicles of subheadings 8703.40,
                                                 8703.50, 8703.60, 8703.70 or 8703.80.
----------------------------------------------------------------------------------------------------------------
                                  Lithium-ion Non-electrical Vehicle Batteries
----------------------------------------------------------------------------------------------------------------
8507.60.0020..................................  Lithium-ion batteries: Other..........           25         2026
----------------------------------------------------------------------------------------------------------------
                                                 Medical Gloves
----------------------------------------------------------------------------------------------------------------
4015.12.10....................................  Medical or surgical gloves of                    50         2025
                                                 vulcanized rubber other than hard              100         2026
                                                 rubber.
----------------------------------------------------------------------------------------------------------------
                                                Natural Graphite
----------------------------------------------------------------------------------------------------------------
2504.10.10....................................  Natural graphite, crystalline flake              25         2026
                                                 (not including flake dust).
2504.10.50....................................  Natural graphite in powder or flakes             25         2026
                                                 (other than crystalline flake).
2504.90.00....................................  Natural graphite, other than in powder           25         2026
                                                 or in flakes.
----------------------------------------------------------------------------------------------------------------
                                             Other Critical Minerals
----------------------------------------------------------------------------------------------------------------
2602.00.00....................................  Manganese ores and concentrates                  25         2024
                                                 including ferruginous manganese ores
                                                 & concentrates with manganese content
                                                 over 20% calculated on dry weight.
2605.00.00....................................  Cobalt ores and concentrates..........           25         2024
2606.00.00....................................  Aluminum ores and concentrates........           25         2024
2608.00.00....................................  Zinc ores and concentrates............           25         2024
2610.00.00....................................  Chromium ores and concentrates........           25         2024
2611.00.60....................................  Tungsten concentrates.................           25         2024
2825.90.30....................................  Tungsten oxides.......................           25         2024
2841.80.00....................................  Tungstates (wolframates)..............           25         2024
2844.41.00....................................  Tritium and its compounds, alloys,               25         2024
                                                 dispersions, ceramic products and
                                                 mixtures thereof.
2844.42.00....................................  Actinium, californium, curium,                   25         2024
                                                 einsteinium, gadolinium, polonium,
                                                 radium, uranium & their compounds,
                                                 alloys, dispersions, ceramic products
                                                 & mixtures.
2844.43.00....................................  Other radioactive elements, isotopes,            25         2024
                                                 compounds, nesoi; alloys,
                                                 dispersions, ceramic products and
                                                 mixtures thereof.
2844.44.00....................................  Radioactive residues..................           25         2024
2849.90.30....................................  Tungsten carbide......................           25         2024
7202.60.00....................................  Ferronickel...........................           25         2024
7202.93.40....................................  Ferroniobium containing by weight less           25         2024
                                                 than 0.02 percent of phosphorus or
                                                 sulfur or less than 0.4 percent of
                                                 silicon.
7202.93.80....................................  Ferroniobium, nesoi...................           25         2024
7901.11.00....................................  Zinc (o/than alloy), unwrought,                  25         2024
                                                 containing o/99.99% by weight of zinc.
7901.12.10....................................  Zinc (o/than alloy), unwrought,                  25         2024
                                                 casting-grade zinc, containing at
                                                 least 97.5% but less than 99.99% by
                                                 weight of zinc.
7901.12.50....................................  Zinc (o/than alloy), unwrought, o/than           25         2024
                                                 casting-grade zinc, containing at
                                                 least 97.5% but less than 99.99% by
                                                 wt. of zinc.
7901.20.00....................................  Zinc alloy, unwrought.................           25         2024
8001.10.00....................................  Tin (o/than alloy), unwrought.........           25         2024
8001.20.00....................................  Tin alloy, unwrought..................           25         2024
8101.10.00....................................  Tungsten, powders.....................           25         2024
8103.20.00....................................  Tantalum, unwrought (including bars              25         2024
                                                 and rods obtained simply by
                                                 sintering); tantalum powders.
8112.21.00....................................  Chromium, unwrought; chromium powders.           25         2024
8112.92.30....................................  Indium, unwrought; indium powders.....           25         2024
----------------------------------------------------------------------------------------------------------------

[[Page 76592]]

 
                                                Permanent Magnets
----------------------------------------------------------------------------------------------------------------
8505.11.00....................................  Permanent magnets and articles                   25         2026
                                                 intended to become permanent magnets
                                                 after magnetization, of metal.
----------------------------------------------------------------------------------------------------------------
                                                 Semiconductors
----------------------------------------------------------------------------------------------------------------
8541.10.00....................................  Diodes, other than photosensitive or             50         2025
                                                 light-emitting diodes.
8541.21.00....................................  Transistors, other than photosensitive           50         2025
                                                 transistors, with a dissipation
                                                 rating of less than 1 W.
8541.29.00....................................  Transistors, other than photosensitive           50         2025
                                                 transistors, with a dissipation
                                                 rating of 1 W or more.
8541.30.00....................................  Thyristors, diacs and triacs, other              50         2025
                                                 than photosensitive devices.
8541.49.10....................................  Other photosensitive semiconductor               50         2025
                                                 diodes, other than light-emitting.
8541.49.70....................................  Photosensitive transistors............           50         2025
8541.49.80....................................  Photosensitive semiconductor devices             50         2025
                                                 nesoi, optical coupled isolators.
8541.49.95....................................  Other photosensitive semiconductor               50         2025
                                                 devices, other than diodes or
                                                 transistors, nesoi.
8541.51.00....................................  Other semiconductor-based transducers,           50         2025
                                                 other than photosensitive transducers.
8541.59.00....................................  Other semiconductor devices, other               50         2025
                                                 than semiconductor-based transducers,
                                                 other than photosensitive devices,
                                                 nesoi.
8541.90.00....................................  Parts of diodes, transistors, similar            50         2025
                                                 semiconductor devices, photosensitive
                                                 semiconductor devices, LED's and
                                                 mounted piezoelectric crystals.
8542.31.00....................................  Electronic integrated circuits:                  50         2025
                                                 processors and controllers.
8542.32.00....................................  Electronic integrated circuits:                  50         2025
                                                 memories.
8542.33.00....................................  Electronic integrated circuits:                  50         2025
                                                 amplifiers.
8542.39.00....................................  Electronic integrated circuits: other.           50         2025
8542.90.00....................................  Parts of electronic integrated                   50         2025
                                                 circuits and microassemblies.
----------------------------------------------------------------------------------------------------------------
                                              Ship-to-Shore Cranes
----------------------------------------------------------------------------------------------------------------
                                                Ship-to-shore gantry cranes,                     25         2024
                                                 configured as a high- or low-profile
                                                 steel superstructure and designed to
                                                 unload intermodal containers from
                                                 vessels with coupling devices for
                                                 containers, including spreaders or
                                                 twist-locks (provided for in
                                                 subheading 8426.19.00), except for
                                                 such cranes provided for in
                                                 subheading 8426.19.00, that are
                                                 fulfilling in whole or in part an
                                                 executed contract for sale dated
                                                 prior to May 14, 2024, for goods that
                                                 are entered for consumption, or
                                                 withdrawn from warehouse for
                                                 consumption, in the United States
                                                 prior to May 14, 2026.
----------------------------------------------------------------------------------------------------------------
                               Solar Cells (whether or not assembled into modules)
----------------------------------------------------------------------------------------------------------------
8541.42.00....................................  Photovoltaic cells, not assembled in             50         2024
                                                 modules or made up into panels.
8541.43.00....................................  Photovoltaic cells assembled in                  50         2024
                                                 modules or made up into panels.
----------------------------------------------------------------------------------------------------------------
                                           Steel and Aluminum Products
----------------------------------------------------------------------------------------------------------------
7206.10.00....................................  Iron and nonalloy steel ingots........           25         2024
7206.90.00....................................  Iron and nonalloy steel in primary               25         2024
                                                 forms (o/than ingots).
7207.11.00....................................  Iron or nonalloy steel semifinished              25         2024
                                                 products, w/less than 0.25% carbon, w/
                                                 rect. cross sect.(incl. sq.), w/width
                                                 less than twice thickness.
7207.12.00....................................  Iron or nonalloy steel semifinished              25         2024
                                                 products, w/less than 0.25% carbon, w/
                                                 rect. cross sect. (exclud. sq.),
                                                 nesoi.
7207.19.00....................................  Iron or nonalloy steel semifinished              25         2024
                                                 products, w/less than 0.25% carbon, o/
                                                 than w/rect. cross section.
7207.20.00....................................  Iron or nonalloy steel semifinished              25         2024
                                                 products, w/0.25% or more of carbon.
7208.10.15....................................  Iron/nonalloy steel, width 600mm+, hot-          25         2024
                                                 rolled flat-rolled products, w/
                                                 patterns in relief, in coils,
                                                 pickled, not clad/plated/coated.
7208.10.30....................................  Iron/nonalloy steel, width 600mm+, hot-          25         2024
                                                 rolled flat-rolled product, in coil,
                                                 w/pattern in relief, w/thick 4.75mm+,
                                                 not pickld, not clad/plated/coatd.
7208.10.60....................................  Iron/nonalloy steel, width 600mm+, hot-          25         2024
                                                 rolled flat-rolled product, in coil,
                                                 w/pattern in relief, w/thick <4.75mm,
                                                 not pickld, not clad/plated/coatd.
7208.25.30....................................  Nonalloy hi-strength steel, width                25         2024
                                                 600mm+, hot-rolled flat-rolled
                                                 products, in coils, w/thick 4.75mm+,
                                                 pickled, not clad/plated/coated.
7208.25.60....................................  Iron/nonalloy steel, width 600mm+, hot-          25         2024
                                                 rolled flat-rolled products, in
                                                 coils, w/thick 4.7mm or more,
                                                 pickled, not clad/plated/coated.
7208.26.00....................................  Iron/nonalloy steel, width 600mm+, hot-          25         2024
                                                 rolled flat-rolled products, in
                                                 coils, w/thick 3mm or mor but less
                                                 4.75mm, pickled, not clad/plated.
7208.27.00....................................  Iron/nonalloy steel, width 600mm+, hot-          25         2024
                                                 rolled flat-rolled products, in
                                                 coils, w/thick less than 3mm,
                                                 pickled, not clad/plated/coated.
7208.36.00....................................  Iron/nonalloy steel, width 600mm+, hot-          25         2024
                                                 rolled flat-rolled products, in
                                                 coils, w/thick o/10mm, not pickled/
                                                 clad/plated/coated.
7208.37.00....................................  Iron/nonalloy steel, width 600mm+, hot-          25         2024
                                                 rolled flat-rolled products, in
                                                 coils, w/thick 4.75mm or more & n/o
                                                 10mm, not pickled/clad/plated.
7208.38.00....................................  Iron/nonalloy steel, width 600mm+, hot-          25         2024
                                                 rolled flat-rolled products, in
                                                 coils, w/thick 3mm or more & less
                                                 4.75mm, not pickld/clad/plated.

[[Page 76593]]

 
7208.39.00....................................  Iron/nonalloy steel, width 600mm+, hot-          25         2024
                                                 rolled flat-rolled products, in
                                                 coils, w/thick less than 3mm, not
                                                 pickled/clad/plated/coated.
7208.40.30....................................  Iron/nonalloy steel, width 600mm+, hot-          25         2024
                                                 rolled flat-rolled products, w/
                                                 pattern in relief, not coils, w/thick
                                                 4.75 or more, n/clad/plated/coated.
7208.40.60....................................  Iron/nonalloy steel, width 600mm+, hot-          25         2024
                                                 rolled flat-rolled products, w/
                                                 pattern in relief, not coils, w/thick
                                                 <4.75mm, not clad/plated/coated.
7208.51.00....................................  Iron/nonalloy steel, width 600mm+, hot-          25         2024
                                                 rolled flat-rolled products, nesoi,
                                                 not in coils, w/thick o/10mm, not
                                                 clad/plated/coated.
7208.52.00....................................  Iron/nonalloy steel, width 600mm+, hot-          25         2024
                                                 rolled flat-rolled products, neosi,
                                                 not in coils, w/thick 4.75mm+ but n/o
                                                 10mm, not clad/plated/.
7208.53.00....................................  Iron/nonalloy steel, width 600mm+, hot-          25         2024
                                                 rolled flat-rolled products, neosi,
                                                 not in coils, w/thick 3mm+ but
                                                 <4.75mm, not clad/plated/coated.
7208.54.00....................................  Iron/nonalloy steel, width 600mm+, hot-          25         2024
                                                 rolled flat-rolled products, neosi,
                                                 not in coils, w/thick less than 3mm,
                                                 not clad/plated/coated.
7208.90.00....................................  Iron/nonalloy steel, width 600mm+, hot-          25         2024
                                                 rolled flat-rolled products, nesoi,
                                                 not clad/plated/coated.
7209.15.00....................................  Iron/nonalloy steel, width 600mm+,               25         2024
                                                 cold-rolled flat-rolled products, in
                                                 coils, w/thick 3mm+, not clad/plated/
                                                 coated.
7209.16.00....................................  Iron/nonalloy steel, width 600mm+,               25         2024
                                                 cold-rolled flat-rolled products, in
                                                 coils, w/thick o/1mm but less than
                                                 3mm, not clad/plated/coated.
7209.17.00....................................  Iron/nonalloy steel, width 600mm+,               25         2024
                                                 cold-rolled flat-rolled products, in
                                                 coils, w/thick 0.5mm or more but n/o
                                                 1mm, not clad/plated/coated.
7209.18.15....................................  Nonalloy hi-strength steel, width                25         2024
                                                 600mm+, cold-rolled flat-rolled
                                                 products, in coils, w/thick less than
                                                 0.5mm, not clad/plated/coated.
7209.18.25....................................  Nonalloy steel(blackplate), width                25         2024
                                                 600mm+, cold-rolled flat-rolled
                                                 products, in coils, w/thick less than
                                                 0.361mm, not clad/plated/coated.
7209.18.60....................................  Iron/nonalloy steel, width 600mm+,               25         2024
                                                 cold-rolled flat-rolled products, in
                                                 coils, w/thick 0.361mm+ but less 5mm,
                                                 not clad/plated/coated.
7209.25.00....................................  Iron/nonalloy steel, width 600mm+,               25         2024
                                                 cold-rolled flat-rolled products, not
                                                 in coils, w/thick 3mm or more, not
                                                 clad/plated/coated.
7209.26.00....................................  Iron/nonalloy steel, width 600mm+,               25         2024
                                                 cold-rolled flat-rolled products, not
                                                 in coils, w/thick o/1mm but less than
                                                 3mm, not clad/plated/coated.
7209.27.00....................................  Iron/nonalloy steel, width 600mm+,               25         2024
                                                 cold-rolled flat-rolled products, not
                                                 in coils, w/thick 0.5mm+ but n/o 1mm,
                                                 not clad/plated/coated.
7209.28.00....................................  Iron/nonalloy steel, width 600mm+,               25         2024
                                                 cold-rolled flat-rolled products, not
                                                 in coils, w/thick less than 0.5mm,
                                                 not clad/plated/coated.
7209.90.00....................................  Iron/nonalloy steel, width 600mm+,               25         2024
                                                 flat-rolled products further worked
                                                 than cold-rolled, not clad/plated/
                                                 coated, nesoi.
7210.11.00....................................  Iron/nonalloy steel, width 600mm+,               25         2024
                                                 flat-rolled products, plated or
                                                 coated with tin, w/thick. 0.5 mm or
                                                 more.
7210.12.00....................................  Iron/nonalloy steel, width 600mm+,               25         2024
                                                 flat-rolled products, plated or
                                                 coated with tin, less than 0.5 mm
                                                 thick.
7210.20.00....................................  Iron/nonalloy steel, width 600mm+,               25         2024
                                                 flat-rolled products, plated or
                                                 coated with lead, including
                                                 terneplate.
7210.30.00....................................  Iron/nonalloy steel, width 600mm+,               25         2024
                                                 flat-rolled products,
                                                 electrolytically plated or coated
                                                 with zinc.
7210.41.00....................................  Iron/nonalloy steel, width 600mm+,               25         2024
                                                 flat-rolled products, plated or
                                                 coated with zinc (other than
                                                 electrolytically), corrugated.
7210.49.00....................................  Iron/nonalloy steel, width 600mm+,               25         2024
                                                 flat-rolled products, plated or
                                                 coated with zinc (other than
                                                 electrolytically), not corrugated.
7210.50.00....................................  Iron/nonalloy steel, width 600mm+,               25         2024
                                                 flat-rolled products, plated or
                                                 coated with chromium oxides or with
                                                 chromium and chromium oxides.
7210.61.00....................................  Iron/nonalloy steel, width 600mm+,               25         2024
                                                 flat-rolled products, plated or
                                                 coated with aluminum-zinc alloys.
7210.69.00....................................  Iron/nonalloy steel, width 600mm+,               25         2024
                                                 flat-rolled products, plated or
                                                 coated with aluminum o/than aluminum-
                                                 zinc alloy.
7210.70.30....................................  Iron/nonalloy steel, width 600mm+,               25         2024
                                                 flat-rolled products, painted/
                                                 varnished or coated w/plastic but not
                                                 plated/coated or clad w/metal.
7210.70.60....................................  Iron/nonalloy steel, width 600mm+,               25         2024
                                                 flat-rolled products, painted/
                                                 varnished or coated w/plastic, nesoi.
7210.90.10....................................  Iron/nonalloy steel, width 600mm+,               25         2024
                                                 flat-rolled products, clad.
7210.90.60....................................  Iron/nonalloy steel, width 600mm+,               25         2024
                                                 flat-rolled products,
                                                 electrolytically coated or plated
                                                 with base metal, nesoi.
7210.90.90....................................  Iron/nonalloy steel, width 600mm+,               25         2024
                                                 flat-rolled products, plated or
                                                 coated, nesoi.
7211.13.00....................................  Iron/nonalloy steel, width less th/              25         2024
                                                 600mm, hot-rolled flat-rolled
                                                 universal mill plate, not clad/plated/
                                                 coated.
7211.14.00....................................  Iron/nonalloy steel, width less th/              25         2024
                                                 600mm, hot-rolled flat-rolled
                                                 products, nesoi, w/thick of 4.75mm or
                                                 more, not clad/plated/coated.
7211.19.15....................................  Nonalloy hi-strength steel, width less           25         2024
                                                 th/300mm, hot-rolled flat-rolled
                                                 products, not clad/plated/coated.
7211.19.20....................................  Iron/nonalloy steel, neosi, width less           25         2024
                                                 th/300mm, hot-rolled flat-rolled
                                                 products, w/thick o/1.25 mm but n/o
                                                 4.75 mm, n/clad/plated/coated.

[[Page 76594]]

 
7211.19.30....................................  Iron/nonalloy steel, neosi, width less           25         2024
                                                 th/300mm, hot-rolled flat-rolled
                                                 products, w/thick 1.25mm or less, not
                                                 clad/plated/coated.
7211.19.45....................................  Nonalloy hi-strength steel, width                25         2024
                                                 300mm+ but less th/600mm, hot-rolled
                                                 flat-rolled products, not clad/plated/
                                                 coated.
7211.19.60....................................  Iron/nonalloy steel, neosi, width                25         2024
                                                 300mm+ but less th/600mm, hot-rolled
                                                 flat-rolled products, pickled, not
                                                 clad/plated/coated.
7211.19.75....................................  Iron/nonalloy steel, neosi, width                25         2024
                                                 300mm+ but less th/600mm, hot-rolled
                                                 flat-rolled products, not pickled,
                                                 not clad/plated/coated.
7211.23.15....................................  Nonalloy hi-strength steel, width less           25         2024
                                                 th/300mm, cold-rolled flat-rolled,
                                                 <0.25% carbon, w/thick o/1.25mm, not
                                                 clad/plated/coated.
7211.23.20....................................  Iron/nonalloy steel, nesoi, width less           25         2024
                                                 th/300mm, cold-rolled flat-rolled,
                                                 <0.25% carbon, w/thick o/1.25mm, not
                                                 clad/plated/coated.
7211.23.30....................................  Iron/nonalloy steel, nesoi, width less           25         2024
                                                 th/300mm, cold-rolled flat-rolled,
                                                 <0.25% carbon, w/thick o/0.25mm n/o
                                                 1.25mm, not clad/plated.
7211.23.45....................................  Iron/nonalloy steel, nesoi, width less           25         2024
                                                 th/300mm, cold-rolled flat-rolled,
                                                 <0.25% carbon, w/thick n/o 0.25mm,
                                                 not clad/plated/coated.
7211.23.60....................................  Iron/nonalloy steel, nesoi, width                25         2024
                                                 300mm+ but less th/600mm, cold-rolled
                                                 flat-rolled, <0.25% carbon, not clad/
                                                 plated/coated.
7211.29.20....................................  Iron/nonalloy steel, width less th/              25         2024
                                                 300mm, cold-rolled flat-rolled, w/
                                                 0.25% or more carbon, w/thick o/
                                                 0.25mm, not clad/plated/coated.
7211.29.45....................................  Iron/nonalloy steel, width less th/              25         2024
                                                 300mm, cold-rolled flat-rolled, w/
                                                 0.25% or more carbon, w/thick 0.25mm
                                                 or less, not clad/plated/coated.
7211.29.60....................................  Iron/nonalloy steel, width 300mm+ but            25         2024
                                                 less th/600mm, cold-rolled flat-
                                                 rolled, w/0.25% or more carbon, not
                                                 clad/plated/coated.
7211.90.00....................................  Iron/nonalloy steel, width less th/              25         2024
                                                 600mm, flat-rolled further worked
                                                 than cold-rolled, not clad, plated or
                                                 coated.
7212.10.00....................................  Iron/nonalloy steel, width less th/              25         2024
                                                 600mm, flat-rolled products, plated
                                                 or coated with tin.
7212.20.00....................................  Iron/nonalloy steel, width less th/              25         2024
                                                 600mm, flat-rolled products,
                                                 electrolytically plated or coated
                                                 with zinc.
7212.30.10....................................  Iron/nonalloy steel, width less th/              25         2024
                                                 300mm, flat-rolled products, plated/
                                                 coated with zinc (other than
                                                 electrolytically), w/thick o/0.25 mm.
7212.30.30....................................  Iron/nonalloy steel, width less th/              25         2024
                                                 300mm, flat-rolled products, plated/
                                                 coated w/zinc (other than
                                                 electrolytically), w/thick 0.25 mm or
                                                 less.
7212.30.50....................................  Iron/nonalloy steel, width 300+ but              25         2024
                                                 less th/600mm, flat-rolled products,
                                                 plated or coated with zinc (other
                                                 than electrolytically).
7212.40.10....................................  Iron/nonalloy steel, width less th/              25         2024
                                                 300mm, flat-rolled products, painted,
                                                 varnished or coated w/plastic.
7212.40.50....................................  Iron/nonalloy steel, width 300+ but              25         2024
                                                 less th/600mm, flat-rolled products,
                                                 painted, varnished or coated w/
                                                 plastic.
7212.50.00....................................  Iron/nonalloy steel, width less th/              25         2024
                                                 600mm, flat-rolled products, plated
                                                 or coated nesoi.
7212.60.00....................................  Iron/nonalloy steel, width less th/              25         2024
                                                 600mm, flat-rolled products, clad.
7213.10.00....................................  Iron/nonalloy, concrete reinforcing              25         2024
                                                 bars and rods in irregularly wound
                                                 coils, hot-rolled.
7213.20.00....................................  Free-cutting steel, bars and rods in             25         2024
                                                 irregularly wound coils, hot-rolled.
7213.91.30....................................  Iron/nonalloy steel, nesoi, hot-rolled           25         2024
                                                 bars & rods in irregularly wound
                                                 coils, w/cir. x-sect. diam. <14mm, n/
                                                 tempered/treated/partly mfd.
7213.91.45....................................  Iron/nonalloy steel, nesoi, hot-rolled           25         2024
                                                 bars & rods in irregularly wound
                                                 coils, w/cir. x-sect. diam. <14mm, w/
                                                 0.6+ of carbon, nesoi.
7213.91.60....................................  Iron/nonalloy steel, nesoi, hot-rolled           25         2024
                                                 bars & rods in irregularly wound
                                                 coils, w/cir. x-sect. diam. <14mm, w/
                                                 less th/0.6 carbon, nesoi.
7213.99.00....................................  Iron/nonalloy steel, nesoi, hot-rolled           25         2024
                                                 bars & rods, w/cir. x-sect. diam
                                                 14+mm or non-circ. x-sect., in
                                                 irregularly wound coils, nesoi.
7214.20.00....................................  Iron/nonalloy steel, concrete                    25         2024
                                                 reinforcing bars and rods, not
                                                 further worked than hot-rolled, hot-
                                                 drawn or hot-extruded, n/coils.
7214.30.00....................................  Free-cutting steel, bars and rods, not           25         2024
                                                 further worked than hot-rolled, hot-
                                                 drawn or hot-extruded, n/coils, nesoi.
7214.91.00....................................  Iron/nonalloy steel, bars and rods,              25         2024
                                                 not further worked than hot-rolled,
                                                 hot-drawn or hot-extruded, w/
                                                 rectangular (o/than square) X-section.
7214.99.00....................................  Iron/nonalloy steel, bars and rods,              25         2024
                                                 not further worked than hot-rolled,
                                                 hot-drawn or hot-extruded, w/non-
                                                 rectangular X-sect, not in coils.
7215.10.00....................................  Free-cutting steel, bars and rods, not           25         2024
                                                 further worked than cold-formed or
                                                 cold-finished, not in coils.
7215.50.00....................................  Iron/nonalloy steel nesoi, bars and              25         2024
                                                 rods, not further wkd. than cold-
                                                 formed or cold-finished, not in coils.
7215.90.10....................................  Iron/nonalloy steel, bars and rods,              25         2024
                                                 not cold-formed, plated or coated
                                                 with metal.
7215.90.30....................................  Iron/nonalloy steel, bars and rods,              25         2024
                                                 cold-formed, plated or coated with
                                                 metal.
7215.90.50....................................  Iron/nonalloy steel, bars and rods,              25         2024
                                                 further worked than cold-formed or
                                                 cold-finished, nesoi.
7216.10.00....................................  Iron/nonalloy steel, U, I or H-                  25         2024
                                                 sections, not further worked than hot-
                                                 rolled, hot-drawn or extruded, w/
                                                 height under 80 mm.
7216.21.00....................................  Iron/nonalloy steel, L-sections, not             25         2024
                                                 further worked than hot-rolled, hot-
                                                 drawn or extruded, w/height under 80
                                                 mm.
7216.22.00....................................  Iron/nonalloy steel, T-sections, not             25         2024
                                                 further worked than hot-rolled, hot-
                                                 drawn or extruded, w/height under 80
                                                 mm.

[[Page 76595]]

 
7216.31.00....................................  Iron/nonalloy steel, U-sections, not             25         2024
                                                 further worked than hot-rolled, hot-
                                                 drawn or extruded, w/height of 80 mm
                                                 or more.
7216.32.00....................................  Iron/nonalloy steel, I-sections                  25         2024
                                                 (standard beams), not further worked
                                                 than hot-rolled, hot-drawn or
                                                 extruded, w/height 80 mm or more.
7216.33.00....................................  Iron/nonalloy steel, H-sections, not             25         2024
                                                 further worked than hot-rolled, hot-
                                                 drawn or extruded, w/height 80 mm or
                                                 more.
7216.40.00....................................  Iron/nonalloy steel, L or T-sections,            25         2024
                                                 not further worked than hot-rolled,
                                                 hot-drawn or extruded, w/height 80 mm
                                                 or more.
7216.50.00....................................  Iron/nonalloy steel, angles, shapes &            25         2024
                                                 sections nesoi, not further worked
                                                 than hot-rolled, hot-drawn or
                                                 extruded.
7216.99.00....................................  Iron/nonalloy steel, angles, shapes &            25         2024
                                                 sections nesoi, further wkd. than
                                                 cold-formed or cold-finished and not
                                                 from flat-rolled products.
7217.10.10....................................  Iron/nonalloy steel, flat wire, <0.25%           25         2024
                                                 carbon, not plated or coated, w/thick
                                                 n/o 0.25 mm.
7217.10.20....................................  Iron/nonalloy steel, flat wire, <0.25%           25         2024
                                                 carbon, not plated or coated, w/thick
                                                 o/0.25mm but n/o 1.25 mm.
7217.10.30....................................  Iron/nonalloy steel, flat wire, <0.25%           25         2024
                                                 carbon, not plated or coated, w/thick
                                                 o/1.25 mm.
7217.10.50....................................  Iron/nonalloy steel, round wire,                 25         2024
                                                 <0.25% carbon, not plated or coated,
                                                 w/diameter of 1.5 mm or more.
7217.10.60....................................  Iron/nonalloy steel, wire (other than            25         2024
                                                 flat or round), <0.25% carbon, not
                                                 plated or coated.
7217.10.70....................................  Iron/nonalloy steel, flat wire, w/               25         2024
                                                 0.25% or more carbon, not plated or
                                                 coated.
7217.10.80....................................  Iron/nonalloy steel, round wire, w/              25         2024
                                                 0.25% or more carbon, not plated or
                                                 coated.
7217.10.90....................................  Iron/nonalloy steel, wire (other than            25         2024
                                                 flat or round), w/0.25% or more of
                                                 carbon, not plated or coated.
7217.20.15....................................  Iron/nonalloy steel, flat wire, plated           25         2024
                                                 or coated with zinc.
7217.20.30....................................  Iron/nonalloy steel, round wire,                 25         2024
                                                 <0.25% carbon, plated or coated with
                                                 zinc, w/diameter of 1.5 mm or more.
7217.20.45....................................  Iron/nonalloy steel, round wire, w/              25         2024
                                                 0.25% or more carbon and/or <1.5mm
                                                 diam, plated or coated with zinc.
7217.20.60....................................  Iron/nonalloy steel, wire (other than            25         2024
                                                 flat or round), <0.25% carbon, plated
                                                 or coated with zinc.
7217.20.75....................................  Iron/nonalloy steel, wire (other than            25         2024
                                                 flat or round), w/0.25% or more of
                                                 carbon, plated or coated with zinc.
7217.30.15....................................  Iron/nonalloy steel, flat wire, plated           25         2024
                                                 or coated with base metal other than
                                                 zinc.
7217.30.30....................................  Iron/nonalloy steel, round wire,                 25         2024
                                                 <0.25% carbon, plated or coated with
                                                 base metal other than zinc, w/diam.
                                                 of 1.5 mm or more.
7217.30.60....................................  Iron/nonalloy steel, wire (other than            25         2024
                                                 flat or round), <0.25% carbon, plated
                                                 or coated with base metal other than
                                                 zinc.
7217.30.75....................................  Iron/nonalloy steel, wire (other than            25         2024
                                                 flat or round), w/0.25% or more of
                                                 carbon, plated or coated with base
                                                 metal other than zinc.
7217.90.10....................................  Iron/nonalloy steel, wire, coated with           25         2024
                                                 plastics.
7217.90.50....................................  Iron/nonalloy steel, wire, plated or             25         2024
                                                 coated with materials other than base
                                                 metals or plastics.
7218.10.00....................................  Stainless steel, ingots and other                25         2024
                                                 primary forms.
7218.91.00....................................  Stainless steel, semifinished products           25         2024
                                                 of rectangular (other than square)
                                                 cross-section.
7218.99.00....................................  Stainless steel, semifinished                    25         2024
                                                 products, other than of rectangular
                                                 (other than square) cross-section.
7219.11.00....................................  Stainless steel, width 600mm+, hot-              25         2024
                                                 rolled flat-rolled products, in
                                                 coils, w/thickness o/10 mm.
7219.12.00....................................  Stainless steel, width 600mm+, hot-              25         2024
                                                 rolled flat-rolled products, in
                                                 coils, w/thick. 4.75 mm or more but n/
                                                 o 10 mm.
7219.13.00....................................  Stainless steel, width 600mm+, hot-              25         2024
                                                 rolled flat-rolled products, in
                                                 coils, w/thick. 3 mm or more but less
                                                 than 4.75 mm.
7219.14.00....................................  Stainless steel, width 600mm+, hot-              25         2024
                                                 rolled flat-rolled products, in
                                                 coils, w/thickness less than 3 mm.
7219.21.00....................................  Stainless steel, width 600mm+, hot-              25         2024
                                                 rolled flat-rolled products, not in
                                                 coils, w/thickness o/10 mm.
7219.22.00....................................  Stainless steel, width 600mm+, hot-              25         2024
                                                 rolled flat-rolled products, not in
                                                 coils, w/thick. 4.75 mm or more but n/
                                                 o 10 mm.
7219.23.00....................................  Stainless steel, width 600mm+, hot-              25         2024
                                                 rolled flat-rolled products, not in
                                                 coils, w/thick. 3 mm or more but less
                                                 than 4.75 mm.
7219.24.00....................................  Stainless steel, width 600mm+, hot-              25         2024
                                                 rolled flat-rolled products, not in
                                                 coils, w/thickness less than 3 mm.
7219.31.00....................................  Stainless steel, width 600mm+, cold-             25         2024
                                                 rolled flat-rolled products, w/
                                                 thickness of 4.75 mm or more.
7219.32.00....................................  Stainless steel, width 600mm+, cold-             25         2024
                                                 rolled flat-rolled products, w/
                                                 thickness of 3 mm or more but less
                                                 than 4.75 mm.
7219.33.00....................................  Stainless steel, width 600mm+, cold-             25         2024
                                                 rolled flat-rolled products, w/
                                                 thickness o/1 mm but less than 3 mm.
7219.34.00....................................  Stainless steel, width 600mm+, cold-             25         2024
                                                 rolled flat-rolled products, w/
                                                 thickness of 0.5 mm or more but n/o 1
                                                 mm.
7219.35.00....................................  Stainless steel, width 600mm+, cold-             25         2024
                                                 rolled flat-rolled products, w/
                                                 thickness of less than 0.5 mm.

[[Page 76596]]

 
7219.90.00....................................  Stainless steel, width 600mm+, flat-             25         2024
                                                 rolled products, nesoi, further
                                                 worked than cold-rolled.
7220.12.10....................................  Stainless steel, width 300m+ but less            25         2024
                                                 th/600mm, hot-rolled flat-rolled
                                                 products, w/thickness of less than
                                                 4.75 mm.
7220.12.50....................................  Stainless steel, width less th/300mm,            25         2024
                                                 hot-rolled flat-rolled products, w/
                                                 thickness of less than 4.75 mm.
7220.20.10....................................  Stainless steel, width 300+ but less             25         2024
                                                 th/600mm, cold-rolled flat-rolled
                                                 products.
7220.20.60....................................  Stainless steel, width less th/300mm,            25         2024
                                                 cold-rolled flat-rolled products, w/
                                                 thickness o/1.25 mm.
7220.20.70....................................  Stainless steel, width less th/300mm,            25         2024
                                                 cold-rolled flat-rolled products, w/
                                                 thickness of 0.25 mm but n/o 1.25 mm.
7220.20.80....................................  Stainless razor blade steel, width               25         2024
                                                 less th/300mm, cold-rolled flat-
                                                 rolled, w/thickness n/o 0.25 mm.
7220.90.00....................................  Stainless steel, width less th/600mm,            25         2024
                                                 flat-rolled products further worked
                                                 than cold-rolled.
7221.00.00....................................  Stainless steel, bars and rods in                25         2024
                                                 irregularly wound coils, hot-rolled.
7222.11.00....................................  Stainless steel, bars and rods, hot-             25         2024
                                                 rolled, hot-drawn or extruded, of
                                                 circular cross-section.
7222.19.00....................................  Stainless steel, bars and rods, hot-             25         2024
                                                 rolled, hot-drawn or extruded, other
                                                 than of circular cross-section.
7222.20.00....................................  Stainless steel, bars and rods, not              25         2024
                                                 further worked than cold-formed or
                                                 cold-finished, nesoi.
7222.30.00....................................  Stainless steel, bars and rods,                  25         2024
                                                 further worked than cold-formed or
                                                 cold-finished, nesoi.
7222.40.30....................................  Stainless steel, angles, shapes &                25         2024
                                                 sections, hot-rolled, not drilled/
                                                 punched or otherwise advanced.
7222.40.60....................................  Stainless steel, angles, shapes &                25         2024
                                                 sections, other than hot-rolled and
                                                 not drilled/punched or otherwise
                                                 advanced.
7223.00.10....................................  Stainless steel, round wire...........           25         2024
7223.00.50....................................  Stainless steel, flat wire............           25         2024
7223.00.90....................................  Stainless steel, wire (other than                25         2024
                                                 round or flat wire).
7224.10.00....................................  Alloy (o/than stainless) steel, ingots           25         2024
                                                 and other primary forms.
7224.90.00....................................  Alloy (o/than stainless) steel,                  25         2024
                                                 semifinished products.
7225.11.00....................................  Alloy silicon electrical steel (grain-           25         2024
                                                 oriented), width 600mm+, flat-rolled
                                                 products.
7225.19.00....................................  Alloy silicon electrical steel (other            25         2024
                                                 than grain-oriented), width 600mm+,
                                                 flat-rolled products.
7225.30.11....................................  Alloy tool steel, width 600mm+, hot-             25         2024
                                                 rolled flat-rolled products, in
                                                 coils, w/thick. of 4.75 mm or more.
7225.30.30....................................  Alloy (o/th stainless, silicon elect.,           25         2024
                                                 hi-speed, or tool) steel, width
                                                 600mm+, hot-rolled flat-rolled
                                                 products, in coils, w/thick 4.75mm+.
7225.30.51....................................  Alloy tool steel, width 600mm+, hot-             25         2024
                                                 rolled flat-rolled products, in
                                                 coils, w/thick. of less than 4.75 mm.
7225.30.70....................................  Alloy (o/th stainless, silicon elect.,           25         2024
                                                 hi-speed, or tool) steel, width
                                                 600mm+, hot-rolled flat-rolled prod.,
                                                 in coils, w/thick less 4.75mm.
7225.40.11....................................  Alloy tool steel, width 600mm+, hot-             25         2024
                                                 rolled flat-rolled products, n/coils,
                                                 w/thick. of 4.75 mm or more.
7225.40.30....................................  Alloy (o/th stainless, silicon elect.,           25         2024
                                                 hi-speed, or tool) steel, width
                                                 600mm+, hot-rolled flat-rolled
                                                 products, n/coils, w/thick 4.75mm+.
7225.40.51....................................  Alloy tool steel, width 600mm+, hot-             25         2024
                                                 rolled flat-rolled products, n/coils,
                                                 w/thick. of less than 4.75 mm.
7225.40.70....................................  Alloy (o/th stainless, silicon elect.,           25         2024
                                                 hi-speed, or tool) steel, width
                                                 600mm+, hot-rolled flat-rolled prod.,
                                                 n/coils, w/thick less 4.75mm.
7225.50.11....................................  Alloy tool steel, width 600mm+, cold-            25         2024
                                                 rolled flat-rolled products.
7225.50.60....................................  Alloy steel (o/than tool), width                 25         2024
                                                 600mm+, cold-rolled flat-rolled
                                                 products, w/thickness 4.75 mm or more.
7225.50.70....................................  Alloy heat-resisting steel, width                25         2024
                                                 600mm+, cold-rolled flat-rolled
                                                 products, w/thickness less than 4.75
                                                 mm.
7225.50.80....................................  Alloy steel (o/th heat-resisting),               25         2024
                                                 width 600mm+, cold-rolled flat-rolled
                                                 products, w/thickness less than 4.75
                                                 mm.
7225.91.00....................................  Alloy steel, width 600mm+, flat-rolled           25         2024
                                                 products further worked than cold-
                                                 rolled, electrolytically plated or
                                                 coated with zinc.
7225.92.00....................................  Alloy steel, width 600mm+, flat-rolled           25         2024
                                                 products further worked than cold-
                                                 rolled, plated or coated with zinc (o/
                                                 than electrolytically).
7225.99.00....................................  Alloy steel, width 600mm+, flat-rolled           25         2024
                                                 products further worked than cold-
                                                 rolled, nesoi.
7226.11.10....................................  Alloy silicon electrical steel (grain-           25         2024
                                                 oriented), width 300mm+ but less th/
                                                 600mm, flat-rolled products.
7226.11.90....................................  Alloy silicon electrical steel (grain-           25         2024
                                                 oriented), width less th/300mm, flat-
                                                 rolled products.
7226.19.10....................................  Alloy silicon electrical steel (o/than           25         2024
                                                 grain-oriented), width 300mm+ but
                                                 less th/600mm, flat-rolled products.
7226.19.90....................................  Alloy silicon electrical steel (o/than           25         2024
                                                 grain-oriented), width less th/300mm,
                                                 flat-rolled products.
7226.20.00....................................  Alloy high-speed steel, width less th/           25         2024
                                                 600mm, flat-rolled products of high-
                                                 speed steel.
7226.91.05....................................  Alloy chipper knife tool steel (o/than           25         2024
                                                 hi-speed), width less th/600mm, hot-
                                                 rolled flat-rolled products.

[[Page 76597]]

 
7226.91.15....................................  Alloy tool steel (o/than hi-speed/               25         2024
                                                 chipper knife), width 300mm+ but less
                                                 th/600mm, hot-rolled flat-rolled
                                                 products.
7226.91.25....................................  Alloy tool steel (o/than hi-speed/               25         2024
                                                 chipper knife), width less th/300mm,
                                                 hot-rolled flat-rolled products.
7226.91.50....................................  Alloy steel (o/than silicon elect./              25         2024
                                                 tool), width less th/600mm, hot-
                                                 rolled flat-rolled products, w/
                                                 thickness of 4.75 mm or more.
7226.91.70....................................  Alloy steel (o/than silicon elect./              25         2024
                                                 tool), width 300mm+ but less th/
                                                 600mm, hot-rolled flat-rolled
                                                 products, w/thickness less than 4.75
                                                 mm.
7226.91.80....................................  Alloy steel (o/than silicon elect./              25         2024
                                                 tool), width less th/300mm, hot-
                                                 rolled flat-rolled products, w/
                                                 thickness less than 4.75 mm.
7226.92.10....................................  Alloy tool steel (o/than hi-speed),              25         2024
                                                 width 300mm+ but less th/600mm, cold-
                                                 rolled flat-rolled products.
7226.92.30....................................  Alloy tool steel (o/than hi-speed),              25         2024
                                                 width less th/300mm, cold-rolled flat-
                                                 rolled products.
7226.92.50....................................  Alloy steel (o/than tool), width                 25         2024
                                                 300mm+ but less th/600mm, cold-rolled
                                                 flat-rolled products.
7226.92.70....................................  Alloy steel (o/than tool), width less            25         2024
                                                 th/300mm, cold-rolled flat-rolled
                                                 products, w/thickness n/o 0.25 mm.
7226.92.80....................................  Alloy steel (o/than tool), width less            25         2024
                                                 th/300mm, cold-rolled flat-rolled
                                                 products, w/thickness o/0.25 mm.
7226.99.01....................................  Alloy steel, width less than 600mm,              25         2024
                                                 flat-rolled products further worked
                                                 than cold-rolled, nesoi.
7227.10.00....................................  Alloy high-speed steel, bars and rods            25         2024
                                                 in irregularly wound coils, hot-
                                                 rolled.
7227.20.00....................................  Alloy silico-manganese steel, bars and           25         2024
                                                 rods in irregularly wound coils, hot-
                                                 rolled.
7227.90.10....................................  Alloy tool steel (o/than hi-speed),              25         2024
                                                 bars & rods in irregular wound coils,
                                                 hot-rolled, n/tempered, treated or
                                                 partly manufactured.
7227.90.20....................................  Alloy tool steel (o/than hi-speed),              25         2024
                                                 bars and rods in irregularly wound
                                                 coils, hot-rolled, nesoi.
7227.90.60....................................  Alloy steel (o/than hi-speed/silico-             25         2024
                                                 mang./tool) steel, bars and rods in
                                                 irregularly wound coils, hot-rolled.
7228.20.10....................................  Alloy silico-manganese steel, bars and           25         2024
                                                 rods, not cold-formed, o/than hot-
                                                 rolled and in irregularly wound coils.
7228.20.50....................................  Alloy silico-manganese steel, bars and           25         2024
                                                 rods, cold formed, o/than hot-rolled
                                                 and in irregularly wound coils.
7228.30.40....................................  Alloy chipper knife tool steel, bars             25         2024
                                                 and rods, not cold-formed & not
                                                 further worked than hot-rolled, hot-
                                                 drawn or extruded.
7228.30.60....................................  Alloy tool steel (o/than ball-bearing/           25         2024
                                                 chipper knife), bars and rods, not
                                                 further worked than hot-rolled, hot-
                                                 drawn or extruded.
7228.30.80....................................  Alloy steel (o/than hi-speed, silico-            25         2024
                                                 mang./tool), bars and rods, not
                                                 further worked than hot-rolled, hot-
                                                 drawn or extruded.
7228.40.00....................................  Alloy steel, bars and rods, not                  25         2024
                                                 further worked than forged.
7228.50.10....................................  Alloy tool steel (o/than hi-speed),              25         2024
                                                 bars and rods, not further worked
                                                 than cold-formed or cold-finished.
7228.50.50....................................  Alloy steel (o/than tool), bars and              25         2024
                                                 rods, not further worked than cold-
                                                 formed or cold-finished.
7228.60.10....................................  Alloy tool steel (o/than hi-speed),              25         2024
                                                 bars and rods, further worked than
                                                 hot-rolled, forged, cold-formed or
                                                 cold-finished.
7228.60.60....................................  Alloy steel (o/than tool), bars and              25         2024
                                                 rods, further worked than hot-rolled,
                                                 forged but not cold-formed.
7228.60.80....................................  Alloy steel (o/than tool), bars and              25         2024
                                                 rods, cold-formed.
7228.70.30....................................  Alloy steel, angles, shapes and                  25         2024
                                                 sections, hot-rolled & not drilled/
                                                 not punched and not otherwise
                                                 advanced.
7228.70.60....................................  Alloy steel, angles, shapes and                  25         2024
                                                 sections, o/than hot-rolled & not
                                                 drilled/punced and not otherwise
                                                 advanced.
7229.20.00....................................  Alloy silico-manganese steel, wire....           25         2024
7229.90.10....................................  Alloy steel (o/than hi-speed/silico-             25         2024
                                                 mang.), flat wire.
7229.90.50....................................  Alloy steel (o/than hi-speed/silico-             25         2024
                                                 mang.), round wire.
7229.90.90....................................  Alloy steel (o/than hi-speed/silico-             25         2024
                                                 mang.), wire (o/than flat or round
                                                 wire).
7301.10.00....................................  Iron or steel sheet piling, whether or           25         2024
                                                 not drilled, punched or made from
                                                 assembled elements.
7302.10.10....................................  Iron or nonalloy steel, rails for                25         2024
                                                 railway or tramway tracks.
7302.10.50....................................  Alloy steel, rails for railway or                25         2024
                                                 tramway tracks.
7302.40.00....................................  Iron or steel, fish plates and sole              25         2024
                                                 plates for jointing or fixing rails.
7302.90.10....................................  Sleepers (cross-ties) for railway or             25         2024
                                                 tramway track construction of iron or
                                                 steel.
7302.90.90....................................  Railway or tramway track construction            25         2024
                                                 material and other materials
                                                 specialized for jointing or fixing
                                                 rails, of iron or steel, nesoi.
7304.11.00....................................  Stainless steel, seamless line pipe              25         2024
                                                 used for oil or gas pipelines.
7304.19.10....................................  Iron (o/than cast) or nonalloy steel,            25         2024
                                                 seamless line pipe used for oil and
                                                 gas pipelines.
7304.19.50....................................  Alloy (other than stainless) steel,              25         2024
                                                 seamless line pipe used for oil or
                                                 gas pipelines.
7304.22.00....................................  Stainless steel, seamless drill pipe,            25         2024
                                                 of a kind used in drilling for oil or
                                                 gas.
7304.23.30....................................  Iron (o/than cast) or nonalloy steel,            25         2024
                                                 seamless drill pipe, of a kind used
                                                 in drilling for oil or gas.
7304.23.60....................................  Alloy (other than stainless) steel,              25         2024
                                                 seamless drill pipe, of a kind used
                                                 in drilling for oil or gas.

[[Page 76598]]

 
7304.24.30....................................  Stainless steel, seamless casing pipe,           25         2024
                                                 threaded or coupled, of a kind used
                                                 in drilling for oil or gas.
7304.24.40....................................  Stainless steel, seamless casing pipe,           25         2024
                                                 not threaded or coupled, of a kind
                                                 used in drilling for oil or gas.
7304.24.60....................................  Stainless steel, seamless tubing, of a           25         2024
                                                 kind used in drilling for oil or gas.
7304.29.10....................................  Iron (o/than cast) or nonalloy steel,            25         2024
                                                 seamless casing pipe, threaded or
                                                 coupled, of a kind used in drilling
                                                 for oil or gas.
7304.29.20....................................  Iron (o/than cast) or nonalloy steel,            25         2024
                                                 seamless casing pipe, not threaded or
                                                 coupled, of a kind used in drilling
                                                 for oil or gas.
7304.29.31....................................  Alloy (other than stainless) steel,              25         2024
                                                 seamless casing pipe, threaded or
                                                 coupled, of a kind used in drilling
                                                 for oil or gas.
7304.29.41....................................  Alloy (other than stainless) steel,              25         2024
                                                 seamless casing pipe, not threaded or
                                                 coupled, of a kind used in drilling
                                                 for oil or gas.
7304.29.50....................................  Iron (o/than cast) or nonalloy,                  25         2024
                                                 seamless tubing, of a kind used in
                                                 drilling for oil or gas.
7304.29.61....................................  Alloy (other than stainless) steel,              25         2024
                                                 seamless tubing, of a kind used in
                                                 drilling for oil or gas.
7304.31.30....................................  Iron (o/than cast) or nonalloy steel,            25         2024
                                                 seamless, cold-drawn or cold-rolled,
                                                 hollow bars w/circular cross section.
7304.31.60....................................  Iron (o/than cast) or nonalloy steel,            25         2024
                                                 seamless, cold-drawn or cold-rolled,
                                                 tubes, pipes & hollow profiles, w/
                                                 circular cross section, nesoi.
7304.39.00....................................  Iron (o/than cast) or nonalloy steel,            25         2024
                                                 seamless, not cold-drawn or cold-
                                                 rolled, tubes, pipes and hollow
                                                 prof., w/circular cross sect., nesoi.
7304.49.00....................................  Stainless steel, seamless, not cold-             25         2024
                                                 drawn/cold-rolled, tubes, pipes and
                                                 hollow profiles, w/circular cross
                                                 section.
7304.51.10....................................  Alloy steel (o/than stainless),                  25         2024
                                                 seamless, cold-drawn/cold-rolled,
                                                 tubes, pipes, etc., w/circ. cross
                                                 sect., for mfr of ball/roller
                                                 bearings.
7304.51.50....................................  Alloy steel (o/than stainless),                  25         2024
                                                 seamless, cold-drawn/cold-rolled,
                                                 tubes, pipes and hollow profiles, w/
                                                 circular cross section, nesoi.
7304.59.10....................................  Alloy steel (o/than stainless),                  25         2024
                                                 seamless, n/cold-drawn/cold-rolled,
                                                 tubes, pipes, etc. w/circ. cross
                                                 sect., for mfr ball/roller bearings.
7304.59.20....................................  Alloy steel (o/than stainless),                  25         2024
                                                 seamless, n/cold-drawn/cold-rolled,
                                                 tubes, pipes, etc. w/circ. cross
                                                 sect., for boilers, heaters, etc.
7304.59.60....................................  Heat-resisting alloy steel (o/than               25         2024
                                                 stainless), seamless, n/cold-drawn/
                                                 cold-rolled, tubes, pipes, etc., w/
                                                 circ. cross sect., nesoi.
7304.59.80....................................  Alloy steel (o/than heat-resist or               25         2024
                                                 stainless), seamless, n/cold-drawn/
                                                 cold-rolled, tubes, pipes and hollow
                                                 prof., w/circ. cross sect., nesoi.
7304.90.10....................................  Iron (o/than cast) or nonalloy steel,            25         2024
                                                 seamless, tubes, pipes and hollow
                                                 profiles, o/than circ. cross sect., w/
                                                 wall thickness of 4 mm or more.
7304.90.70....................................  Alloy steel (o/than stainless),                  25         2024
                                                 seamless, tubes, pipes and hollow
                                                 profiles, o/than circ. cross sect., w/
                                                 wall thickness less than 4 mm.
7305.11.10....................................  Iron or nonalloy steel, seamed, w/               25         2024
                                                 circ. cross sect. & ext. diam o/
                                                 406.4mm, line pipe, long. submerg.
                                                 arc weld., used for oil/gas.
7305.11.50....................................  Alloy steel, seamed, circ. w/cross               25         2024
                                                 sect. & ext. diam o/406.4mm, line
                                                 pipe, long. submerg. arc weld., used
                                                 for oil/gas pipelines.
7305.12.10....................................  Iron or nonalloy steel, seamed, w/               25         2024
                                                 circ. cross sect. & ext. diam o/
                                                 406.4mm, line pipe, long. welded
                                                 nesoi, used for oil/gas.
7305.12.50....................................  Alloy steel, seamed, w/circ. cross               25         2024
                                                 sect. & ext. diam o/406.4mm, line
                                                 pipe, long. welded nesoi, used for
                                                 oil/gas pipelines.
7305.19.10....................................  Iron or nonalloy steel, seamed, w/               25         2024
                                                 circ. cross sect.& ext. diam o/
                                                 406.4mm, line pipe, not long. welded,
                                                 used for oil/gas.
7305.19.50....................................  Alloy steel, seamed, w/circ. cross               25         2024
                                                 sect. & ext. diam o/406.4mm, line
                                                 pipe, not long. welded, used for oil/
                                                 gas pipelines.
7305.20.20....................................  Iron or nonalloy steel, seamed, w/               25         2024
                                                 circ. cross sect. & ext. diam. o/
                                                 406.4mm, casing pipe, threaded/
                                                 coupled, of kind for drilling for oil/
                                                 gas.
7305.20.40....................................  Iron or nonalloy steel, seamed, w/               25         2024
                                                 circ. cross sect. & ext. diam. o/
                                                 406.4mm, casing pipe, n/threaded/
                                                 coupled, of kind for drill. for oil/
                                                 gas.
7305.20.60....................................  Alloy steel, seamed, w/circ. cross               25         2024
                                                 sect. & ext. diam. o/406.4mm, casing
                                                 pipe, threaded/coupled, of kind for
                                                 drilling for oil/gas.
7305.20.80....................................  Alloy steel, seamed, w/circ. cross               25         2024
                                                 sect. & ext. diam. o/406.4mm, casing
                                                 pipe, n/threaded/coupled, of kind for
                                                 drilling for oil/gas.
7305.31.20....................................  Steel, long. welded, w/circ. cross               25         2024
                                                 sect & ext. diam o/406.4mm, tapered
                                                 pipes and tubes principally used as
                                                 pts of illuminating arts.
7305.31.40....................................  Iron or nonalloy steel, long. welded,            25         2024
                                                 w/circ. cross sect. & ext. diam. o/
                                                 406.4mm, tubes and pipes, o/th used
                                                 in oil/gas drill.etc.
7305.31.60....................................  Alloy steel, long. welded, w/circ.               25         2024
                                                 cross sect. & ext. diam. o/406.4mm,
                                                 tubes and pipes, o/than used in oil/
                                                 gas drill. or pipelines.
7305.39.10....................................  Iron or nonalloy steel, weld. o/than             25         2024
                                                 long. weld., w/circ. x-sect. & ext.
                                                 diam. o/406.4mm, tubes and pipes, o/
                                                 th used in oil/gas drill.etc.
7305.39.50....................................  Alloy steel, weld. o/than long. weld.,           25         2024
                                                 w/circ. x-sect. & ext. diam. o/
                                                 406.4mm, tubes and pipes, o/than used
                                                 in oil/gas drill. or pipelines.
7305.90.10....................................  Iron or nonalloy steel, seamed, w/               25         2024
                                                 circ. cross sect. & ext. diam. o/
                                                 406.4mm, not welded, tubes and pipes,
                                                 o/th used in oil/gas drill.etc.

[[Page 76599]]

 
7305.90.50....................................  Alloy steel, seamed, w/circ. cross               25         2024
                                                 sect. & ext. diam. o/406.4mm, not
                                                 welded, tubes and pipes, o/than used
                                                 in oil/gas drill. or pipelines.
7306.11.00....................................  Welded stainless steel, w/ext. diam              25         2024
                                                 406.4mm or less or o/than circ. x-
                                                 sect, line pipe of a kind used for
                                                 oil and gas pipelines.
7306.19.10....................................  Iron or nonalloy steel, seamed, w/ext.           25         2024
                                                 diam. 406.4mm or less or o/than circ.
                                                 x-sect, line pipe of a kind used for
                                                 oil and gas pipelines.
7306.19.51....................................  Alloy steel, seamed (o/than welded               25         2024
                                                 stainless steel), w/ext. diam 406.4mm
                                                 or less or o/than circ. x-sect, line
                                                 pipe of a kind used for oil an.
7306.21.30....................................  Welded stainless steel, w/ext. diam              25         2024
                                                 406.4mm or less or o/than circ. x-
                                                 sect, threaded/coupled, casing of
                                                 kind used in drilling for oil/gas.
7306.21.40....................................  Welded stainless steel, w/ext. diam              25         2024
                                                 406.4mm or less or o/than circ. x-
                                                 sect, n/threaded/coupled, casing of
                                                 kind used in drilling for oil/gas.
7306.21.80....................................  Welded stainless steel, w/ext. diam              25         2024
                                                 406.4mm or less or o/than circ. x-
                                                 sect, tubing of a kind used for
                                                 drilling for oil/gas.
7306.29.10....................................  Iron or nonalloy steel, seamed, w/ext.           25         2024
                                                 diam 406.4mm or less or o/than circ.
                                                 x-sect, threaded/coupled, casing of
                                                 kind used in drill. oil/gas.
7306.29.20....................................  Iron or nonalloy steel, seamed, w/ext.           25         2024
                                                 diam 406.4mm or less or o/than circ.
                                                 x-sect, n/threaded/coupled, casing
                                                 kind used drill for oil/gas.
7306.29.31....................................  Alloy steel, seamed (o/than welded               25         2024
                                                 stainless steel), w/ext. diam 406.4mm
                                                 or less or o/than circ. x-sect,
                                                 threaded/coupled, casing of kind us.
7306.29.41....................................  Alloy steel, seamed (o/than welded               25         2024
                                                 stainless steel), w/ext. diam 406.4mm
                                                 or less or o/than circ. x-sect, n/
                                                 threaded/coupled, casing of kind.
7306.29.60....................................  Iron or nonalloy steel, seamed, w/ext.           25         2024
                                                 diam. 406.4mm or less or o/than circ.
                                                 x-sect, tubing of a kind used for
                                                 drilling for oil/gas.
7306.29.81....................................  Alloy steel, seamed (o/than welded               25         2024
                                                 stainless steel), w/ext. diam 406.4mm
                                                 or less or o/than circ. x-sect,
                                                 tubing of a kind used for drilling.
7306.30.10....................................  Iron or nonalloy steel, welded, w/               25         2024
                                                 circ. x-sect & ext. diam. 406.4mm or
                                                 less, tubes, pipes, hollow profiles,
                                                 w/wall thick. less than 1.65 mm.
7306.30.30....................................  Nonalloy steel, welded, w/circ. x-sect           25         2024
                                                 & ext. diam. 406.4mm or less, tapered
                                                 pipes & tubes, w/wall thick. of 1.65
                                                 mm+, pts. of illum. arts..
7306.30.50....................................  Iron or nonalloy steel, welded, w/               25         2024
                                                 circ. x-sect & ext. diam. 406.4mm or
                                                 less, pipes, tubes & holl. prof., w/
                                                 wall thick. of 1.65 mm or more.
7306.40.10....................................  Stainless steel, welded, w/circ. x-              25         2024
                                                 sect & ext. diam. 406.4mm or less,
                                                 tubes, pipes, hollow profiles, w/wall
                                                 thick. less than 1.65 mm.
7306.40.50....................................  Stainless steel, welded, w/circ. x-              25         2024
                                                 sect & ext. diam. 406.4mm or less,
                                                 tubes, pipes, hollow profiles, w/wall
                                                 thick. of 1.65 mm or more.
7306.50.10....................................  Alloy steel (o/stainless), welded, w/            25         2024
                                                 circ. x-sect & ext. diam. 406.4mm or
                                                 less, tubes, pipes, hollow prof., w/
                                                 wall thick. less th/1.65 mm.
7306.50.30....................................  Alloy steel (o/stainless), welded, w/            25         2024
                                                 circ. x-sect & ext. diam. 406.4mm or
                                                 less, tapered pipes & tubes, w/wall
                                                 thick. of 1.65 mm+, pts. illum.
7306.50.50....................................  Alloy steel (o/stainless), welded, w/            25         2024
                                                 circ. x-sect & ext. diam. 406.4mm or
                                                 less, tubes, pipes, hollow prof., w/
                                                 wall thick. of 1.65 mm+.
7306.61.10....................................  Iron or nonalloy steel, welded, w/               25         2024
                                                 square or rectangular x-sect, tubes,
                                                 pipes and hollow profiles, w/wall
                                                 thickness of 4 mm or more.
7306.61.30....................................  Alloy steel, welded, w/square or                 25         2024
                                                 rectangular x-sect, tubes, pipes and
                                                 hollow profiles, w/wall thickness of
                                                 4 mm or more.
7306.61.50....................................  Iron or nonalloy steel, welded, w/               25         2024
                                                 square or rectangular x-sect, tubes,
                                                 pipes and hollow profiles, w/wall
                                                 thickness less than 4 mm.
7306.61.70....................................  Alloy steel, welded, w/square or                 25         2024
                                                 rectangular x-sect, tubes, pipes and
                                                 hollow profiles, w/wall thickness
                                                 less than 4 mm.
7306.69.10....................................  Iron or nonalloy steel, welded, w/               25         2024
                                                 other non-circ. x-sect, tubes, pipes
                                                 and hollow profiles, w/wall thickness
                                                 of 4 mm or more.
7306.69.30....................................  Alloy steel, welded, w/other non-circ.           25         2024
                                                 x-sect, tubes, pipes and hollow
                                                 profiles, w/wall thickness of 4 mm or
                                                 more.
7306.69.70....................................  Alloy steel, welded, w/other non-circ.           25         2024
                                                 x-sect, tubes, pipes and hollow
                                                 profiles, w/wall thickness less than
                                                 4 mm.
7306.90.10....................................  Iron or nonalloy steel, seamed o/                25         2024
                                                 welded, w/non-circ. x-sect. or circ.
                                                 x-sect. w/ext. diam. 406.4mm or less,
                                                 tubes, pipes & hollow profiles.
7306.90.50....................................  Alloy steel, seamed o/than welded, w/            25         2024
                                                 non-circ. x-sect or circ. x-sect w/
                                                 ext. diam. 406.4mm or less, tubes,
                                                 pipes and hollow profiles.
7601.10.30....................................  Aluminum (o/than alloy), unwrought, in           25         2024
                                                 coils, w/uniform x-section throughout
                                                 length & w/least cross-sectional
                                                 dimension n/o 9.5 mm.
7601.10.60....................................  Aluminum (o/than alloy), unwrought               25         2024
                                                 nesoi.
7601.20.30....................................  Aluminum alloys, unwrought, in coils,            25         2024
                                                 w/uniform x-section throughout length
                                                 & w/least cross-sectional dimension n/
                                                 o 9.5 mm.
7601.20.60....................................  Aluminum alloys, w/25 or more by                 25         2024
                                                 weight of silicon, unwrought nesoi.
7601.20.90....................................  Aluminum alloys nesoi, unwrought nesoi           25         2024
7604.10.10....................................  Aluminum (o/than alloy), profiles.....           25         2024
7604.10.30....................................  Aluminum (o/than alloy), bar and rods,           25         2024
                                                 with a round cross section.
7604.10.50....................................  Aluminum (o/than alloy), bar and rods,           25         2024
                                                 other than with a round cross section.
7604.21.00....................................  Aluminum alloy, hollow profiles.......           25         2024
7604.29.10....................................  Aluminum alloy, profiles (o/than                 25         2024
                                                 hollow profiles).
7604.29.30....................................  Aluminum alloy, bars and rods, having            25         2024
                                                 a round cross section.

[[Page 76600]]

 
7604.29.50....................................  Aluminum alloy, bars and rods, other             25         2024
                                                 than with a round cross section.
7605.11.00....................................  Aluminum (o/than alloy), wire, with a            25         2024
                                                 maximum cross-sectional dimension
                                                 over 7 mm.
7605.19.00....................................  Aluminum (o/than alloy), wire, with a            25         2024
                                                 maximum cross-sectional dimension of
                                                 7 mm or less.
7605.21.00....................................  Aluminum alloy, wire, with a maximum             25         2024
                                                 cross-sectional dimension over 7 mm.
7605.29.00....................................  Aluminum alloy, wire, with a maximum             25         2024
                                                 cross-sectional dimension of 7 mm or
                                                 less.
7606.11.30....................................  Aluminum (o/than alloy), plates/sheets/          25         2024
                                                 strip, w/thick. o/0.2mm, rectangular
                                                 (incl. sq), not clad.
7606.11.60....................................  Aluminum (o/than alloy), plates/sheets/          25         2024
                                                 strip, w/thick. o/0.2mm, rectangular
                                                 (incl. sq), clad.
7606.12.30....................................  Aluminum alloy, plates/sheets/strip, w/          25         2024
                                                 thick. o/0.2mm, rectangular (incl.
                                                 sq), not clad.
7606.12.60....................................  Aluminum alloy, plates/sheets/strip, w/          25         2024
                                                 thick. o/0.2mm, rectangular (incl.
                                                 sq), clad.
7606.91.30....................................  Aluminum (o/than alloy), plates/sheets/          25         2024
                                                 strip, w/thick. o/0.2mm, o/than
                                                 rectangular (incl. sq), not clad.
7606.91.60....................................  Aluminum (o/than alloy), plates/sheets/          25         2024
                                                 strip, w/thick. o/0.2mm, o/than
                                                 rectangular (incl. sq), clad.
7606.92.30....................................  Aluminum alloy, plates/sheets/st rip,            25         2024
                                                 w/thick. o/0.2mm, o/than rectangular
                                                 (incl. sq), not clad.
7606.92.60....................................  Aluminum alloy, plates/sheets/strip, w/          25         2024
                                                 thick. o/0.2mm, o/than rectangular
                                                 (incl. sq), clad.
7607.11.30....................................  Aluminum, foil, w/thickness n/o 0.01             25         2024
                                                 mm, rolled but not further worked,
                                                 not backed.
7607.11.60....................................  Aluminum, foil, w/thickness over 0.01            25         2024
                                                 mm but n/o 0.15 mm, rolled but not
                                                 further worked, not backed.
7607.11.90....................................  Aluminum, foil, w/thickness over 0.15            25         2024
                                                 mm but n/o 0.2 mm, rolled but not
                                                 further worked, not backed.
7607.19.60....................................  Aluminum, foil nesoi, w/thickness o/             25         2024
                                                 0.15mm but n/o 0.2 mm or 0.15mm or
                                                 less & not cut to shape, not rolled,
                                                 not backed, nesoi.
7607.20.10....................................  Aluminum, foil, w/thickness n/o 0.2              25         2024
                                                 mm, backed, covered or decorated with
                                                 a character, design, fancy effect or
                                                 pattern.
7608.10.00....................................  Aluminum (o/than alloy), tubes and               25         2024
                                                 pipes.
7608.20.00....................................  Aluminum alloy, tubes and pipes.......           25         2024
7609.00.00....................................  Aluminum, fittings for tubes and pipes           25         2024
----------------------------------------------------------------------------------------------------------------
                                              Syringes and Needles
----------------------------------------------------------------------------------------------------------------
9018.31.00....................................  Syringes, with or without their                 100         2024
                                                 needles; parts and accessories
                                                 thereof; except enteral syringes
                                                 provided for in heading 9903.91.10,
                                                 entered before January 1, 2026
                                                 (described in statistical reporting
                                                 number 9018.31.0080).
9018.32.00....................................  Tubular metal needles and needles for           100         2024
                                                 sutures, used in medical, surgical,
                                                 dental or veterinary sciences, and
                                                 parts and accessories thereof.
----------------------------------------------------------------------------------------------------------------

Annex B--Exclusions for Solar Manufacturing Equipment

                      Exclusion Product Description
------------------------------------------------------------------------
 
-------------------------------------------------------------------------
Silicon growth furnaces, including Czochralski crystal growth furnaces,
 designed for growing monocrystalline silicon ingots (boules) of a mass
 exceeding 700 kg, for use in solar wafer manufacturing (described in
 statistical reporting number 8486.10.0000).
Band saws designed for cutting or slicing cylindrical monocrystalline
 silicon ingots (boules) of an initial mass exceeding 400 kg into square
 or rectangular ingots (boules), for use in solar wafer manufacturing
 (described in statistical reporting number 8486.10.0000).
Machines designed to align and adhere square or rectangular
 monocrystalline silicon ingots (boules) of an initial mass exceeding
 200 kg to plastic support boards on metal mounting plates to provide
 support during diamond wire sawing, for use in solar wafer
 manufacturing (described in statistical reporting number 8486.10.0000).
Diamond wire saws designed for cutting or slicing square or rectangular
 monocrystalline silicon ingots (boules) of an initial mass exceeding
 400 kg into solar wafers of a thickness not exceeding 200 micrometers
 (described in statistical reporting number 8486.10.0000).
Wire guide roller machines, presented with diamond wire saws designed
 for slicing square or rectangular monocrystalline silicon ingots
 (boules) of an initial mass exceeding 400 kg into solar wafers of a
 thickness not exceeding 200 micrometers, all of the foregoing for use
 in solar wafer manufacturing (described in statistical reporting number
 8486.10.0000).
Coolant fluid recycling machines, presented with diamond wire saws
 designed for slicing square or rectangular monocrystalline silicon
 ingots (boules) of an initial mass exceeding 400 kg into solar wafers
 of a thickness not exceeding 200 micrometers, all of the foregoing for
 use in solar wafer manufacturing (described in statistical reporting
 number 8486.10.0000).
Degumming machines designed to remove adhesives from solar wafers
 (described in statistical reporting number 8486.10.0000).
Texturing, etching, polishing, and cleaning machines designed to
 prepare, repair, clean, etch, polish or texture the solar wafer
 substrate, whether or not integrated with automation equipment for
 transferring solar wafers from one process station to the next, all the
 foregoing for use in solar wafer manufacturing (described in
 statistical reporting number 8486.20.0000).
Thermal diffusion quartz-tube furnaces, designed to diffuse dopant
 impurities into square or rectangular silicon wafers, whether or not
 integrated with automation equipment for transferring solar wafers from
 one process station to the next or boat loading or unloading machines,
 all the foregoing for use in solar cell manufacturing (described in
 statistical reporting number 8486.20.0000).
Plasma-enhanced or low-pressure chemical vapor deposition machines
 designed to deposit amorphous or nanocrystalline layers on one or both
 surfaces of a solar wafer, whether or not integrated with automation
 equipment for transferring solar wafers from one process station to the
 next, all the foregoing for use in solar cell manufacturing (described
 in statistical reporting number 8486.20.0000).

[[Page 76601]]

 
Physical vapor deposition (PVD) machines, designed to deposit a thin
 film of transparent conducting oxide on one or both surfaces of a solar
 wafer, whether or not integrated with automation equipment for
 transferring solar wafers from one process station to the next, all the
 foregoing for use in solar cell manufacturing (described in statistical
 reporting number 8486.20.0000).
Screen printing line machines, including sintering furnaces for printing
 conducting contacts on both surfaces of a solar wafer, whether or not
 integrated with automation equipment for transferring solar wafers from
 one process station to the next, and whether or not integrated with
 equipment for solar cell testing, all the foregoing for use in solar
 cell manufacturing (described in statistical reporting number
 8486.20.0000).
Machines designed for transporting polysilicon material to growth
 furnaces and machines designed for transporting monocrystalline ingots
 (boules) and wafers throughout the solar wafer manufacturing process,
 including machines for loading or unloading solar wafers during the
 diamond wire slicing process (described in statistical reporting number
 8486.40.0030).
Machines designed for lifting, handling, loading, or unloading of solar
 wafers of a thickness not exceeding 200 micrometers, for use in solar
 wafer manufacturing (described in statistical reporting number
 8486.40.0030).
------------------------------------------------------------------------

Annex C--Changes to Harmonized Tariff Schedule of the United States

    1. Effective with respect to goods entered for consumption, or 
withdrawn from warehouse for consumption, on or after 12:01 a.m. 
eastern daylight time on September 27, 2024, subchapter III of chapter 
99 of the Harmonized Tariff Schedule of the United States (HTSUS) is 
modified by inserting the following new headings 9903.91.01, 9903.91.02 
and 9903.91.03 in numerical sequence, with the material in the new 
headings inserted in the columns of the HTSUS labeled ``Heading/
Subheading'', ``Article Description'', ``Rates of Duty 1--General'', 
``Rates of Duty 1--Special'' and ``Rates of Duty 2'', respectively:

----------------------------------------------------------------------------------------------------------------
                                                                             Rates of duty
                                                     -----------------------------------------------------------
    Heading/ subheading        Article description                       1
                                                     ----------------------------------------          2
                                                            General             Special
----------------------------------------------------------------------------------------------------------------
``9903.91.01...............  Effective with respect   The duty provided
                              to entries on or after   in the applicable
                              September 27, 2024,      subheading + 25%.
                              articles the product
                              of China, as provided
                              for in subdivision (b)
                              of U.S. note 31 to
                              this subchapter.
9903.91.02.................  Effective with respect   The duty provided
                              to entries on or after   in the applicable
                              September 27, 2024,      subheading + 50%.
                              articles the product
                              of China, as provided
                              for in subdivision (c)
                              of U.S. note 31 to
                              this subchapter.
9903.91.03.................  Except as provided in    The duty provided
                              heading 9903.91.10,      in the applicable
                              effective with respect   subheading +
                              to entries on or after   100%''.
                              September 27, 2024,
                              articles the product
                              of China, as provided
                              for in subdivision (d)
                              of U.S. note 31 to
                              this subchapter.
----------------------------------------------------------------------------------------------------------------

    2. Effective with respect to goods entered for consumption, or 
withdrawn from warehouse for consumption, on or after 12:01 a.m. 
eastern standard time on January 1, 2025, subchapter III of chapter 99 
of the HTSUS is modified by inserting the following new headings 
9903.91.04 and 9903.91.05 in numerical sequence, with the material in 
the new heading inserted in the columns of the HTSUS labeled ``Heading/
Subheading'', ``Article Description'', ``Rates of Duty 1--General'', 
``Rates of Duty 1--Special'' and ``Rates of Duty 2'', respectively:

----------------------------------------------------------------------------------------------------------------
                                                                             Rates of duty
                                                     -----------------------------------------------------------
    Heading/ subheading        Article description                       1
                                                     ----------------------------------------          2
                                                            General             Special
----------------------------------------------------------------------------------------------------------------
``9903.91.04...............  Effective with respect   The duty provided
                              to entries on or after   in the applicable
                              January 1, 2025, and     subheading + 25%.
                              before January 1,
                              2026, articles the
                              product of China, as
                              provided for in
                              subdivision (e) of
                              U.S. note 31 to this
                              subchapter.
9903.91.05.................  Effective with respect   The duty provided
                              to entries on or after   in the applicable
                              January 1, 2025,         subheading +
                              articles the product     50%''.
                              of China, as provided
                              for in subdivision (f)
                              of U.S. note 31 to
                              this subchapter.
----------------------------------------------------------------------------------------------------------------

    3. Effective with respect to goods entered for consumption, or 
withdrawn from warehouse for consumption, on or after 12:01 a.m. 
eastern standard time on January 1, 2026, subchapter III of chapter 99 
of the HTSUS is modified by inserting the following new headings 
9903.91.06, 9903.91.07, and 9903.91.08 in numerical sequence, with the 
material in the new heading inserted in the columns of the HTSUS 
labeled ``Heading/Subheading'', ``Article Description'', ``Rates of 
Duty 1--General'', ``Rates of Duty 1--Special'' and ``Rates of Duty 
2'', respectively:

[[Page 76602]]



----------------------------------------------------------------------------------------------------------------
                                                                             Rates of duty
                                                     -----------------------------------------------------------
    Heading/ subheading        Article description                       1
                                                     ----------------------------------------          2
                                                            General             Special
----------------------------------------------------------------------------------------------------------------
``9903.91.06...............  Effective with respect   The duty provided
                              to entries on or after   in the applicable
                              January 1, 2026,         subheading + 25%.
                              articles the product
                              of China, as provided
                              for in subdivision (g)
                              of U.S. note 31 to
                              this subchapter.
9903.91.07.................  Effective with respect   The duty provided
                              to entries on or after   in the applicable
                              January 1, 2026,         subheading + 50%.
                              articles the product
                              of China, as provided
                              for in subdivision (h)
                              of U.S. note 31 to
                              this subchapter.
9903.91.08.................  Effective with respect
                              to entries on or after
                              January 1, 2026,
                              articles the product
                              of China, as provided
                              for in subdivision (i)
                              of U.S. note 31 to
                              this subchapter.
----------------------------------------------------------------------------------------------------------------

    4. Effective on September 27, 2024, subchapter III of chapter 99 of 
the HTSUS is modified by inserting the following new U.S. note 31 in 
numerical sequence:
    ``31. (a) As provided in headings 9903.91.01, 9903.91.02, 
9903.91.03, 9903.91.04, 9903.91.05, 9903.91.06, 9903.91.07 and 
9903.91.08 and subheading 9903.92.10, products of China shall be 
subject to additional ad valorem rates of duty, as provided for in this 
note. The products of China that are subject to additional ad valorem 
rates of duty in accordance with this note are products of China that 
are classified in the subheadings, or described in the statistical 
reporting numbers, enumerated in this note.
    ``Notwithstanding U.S. note 1 to this subchapter, all products of 
China that are subject to the additional ad valorem rate of duty 
imposed by headings 9903.91.01, 9903.91.02, 9903.91.03, 9903.91.04, 
9903.91.05, 9903.91.06, 9903.91.07 and 9903.91.08 and subheading 
9903.92.10, shall also be subject to the general rates of duty imposed 
on products of China classified in the subheadings, or described in the 
statistical reporting numbers, enumerated in this note.
    ``Products of China that are classified in the subheadings, or 
described in the statistical reporting numbers, enumerated in this note 
that are eligible for special tariff treatment under general note 
3(c)(i) to the HTSUS, or that are eligible for temporary duty 
exemptions or reductions under subchapter II to chapter 99, shall be 
subject to the additional ad valorem rate of duty imposed by headings 
9903.91.01, 9903.91.02, 9903.91.03, 9903.91.04, 9903.91.05, 9903.91.06, 
9903.91.07 and 9903.91.08 and subheading 9903.92.10.
    ``The additional duties imposed by headings 9903.91.01, 9903.91.02, 
9903.91.03, 9903.91.04, 9903.91.05, 9903.91.06, 9903.91.07 and 
9903.91.08 and subheading 9903.92.10, do not apply to goods for which 
entry is properly claimed under a provision of chapter 98 of the HTSUS, 
except for goods entered under subheadings 9802.00.40, 9802.00.50, and 
9802.00.60, and heading 9802.00.80. For subheadings 9802.00.40, 
9802.00.50, and 9802.00.60, the additional duties apply to the value of 
repairs, alterations, or processing performed abroad, as described in 
the applicable subheading. For heading 9802.00.80, the additional 
duties apply to the value of the article less the cost or value of such 
products of the United States, as described in heading 9802.00.80.
    ``Products of China that are provided for in headings 9903.91.01, 
9903.91.02, 9903.91.03, 9903.91.04, 9903.91.05, 9903.91.06, 9903.91.07 
and 9903.91.08 and subheading 9903.92.10 and classified in one of the 
subheadings, or described in the statistical reporting numbers, 
enumerated in this note shall continue to be subject to antidumping, 
countervailing, or other duties, fees, exactions and charges that apply 
to such products, as well as to the additional ad valorem rate of duty 
imposed by headings 9903.91.01, 9903.91.02, 9903.91.03, 9903.91.04, 
9903.91.05, 9903.91.06, 9903.91.07, and 9903.91.08 and subheading 
9903.92.10.''
    ``(b) Heading 9903.91.01 applies to products of China that are 
classified in the 8-digit subheadings, or described in the 10-digit 
statistical reporting numbers, enumerated in this subdivision, 
effective with respect to goods entered for consumption, or withdrawn 
from warehouse for consumption, on or after 12:01 a.m. eastern daylight 
time on September 27, 2024:
(1) N95 respirators of textiles, described in statistical reporting 
numbers 6307.90.9842 or 6307.90.9844
(2) Respirators of textiles, other than N95 respirators, described in 
statistical reporting number 6307.90.9850
(3) Face masks of textiles, other than disposable, described in 
statistical reporting number 6307.90.9875
(4) Lithium-ion batteries of a kind used as the primary source of 
electrical power for electrically powered vehicles of subheadings 
8703.40, 8703.50, 8703.60, 8703.70 or 8703.80, described in statistical 
reporting number 8507.60.0010
(5) 2602.00.00
(6) 2605.00.00
(7) 2606.00.00
(8) 2608.00.00
(9) 2610.00.00
(10) 2611.00.60
(11) 2825.90.30
(12) 2841.80.00
(13) 2844.41.00
(14) 2844.42.00
(15) 2844.43.00
(16) 2844.44.00
(17) 2849.90.30
(18) 7202.60.00
(19) 7202.93.40
(20) 7202.93.80
(21) 7206.10.00
(22) 7206.90.00
(23) 7207.11.00
(24) 7207.12.00
(25) 7207.19.00
(26) 7207.20.00
(27) 7208.10.15
(28) 7208.10.30
(29) 7208.10.60
(30) 7208.25.30
(31) 7208.25.60
(32) 7208.26.00
(33) 7208.27.00
(34) 7208.36.00
(35) 7208.37.00
(36) 7208.38.00
(37) 7208.39.00
(38) 7208.40.30
(39) 7208.40.60
(40) 7208.51.00
(41) 7208.52.00
(42) 7208.53.00

[[Page 76603]]

(43) 7208.54.00
(44) 7208.90.00
(45) 7209.15.00
(46) 7209.16.00
(47) 7209.17.00
(48) 7209.18.15
(49) 7209.18.25
(50) 7209.18.60
(51) 7209.25.00
(52) 7209.26.00
(53) 7209.27.00
(54) 7209.28.00
(55) 7209.90.00
(56) 7210.11.00
(57) 7210.12.00
(58) 7210.20.00
(59) 7210.30.00
(60) 7210.41.00
(61) 7210.49.00
(62) 7210.50.00
(63) 7210.61.00
(64) 7210.69.00
(65) 7210.70.30
(66) 7210.70.60
(67) 7210.90.10
(68) 7210.90.60
(69) 7210.90.90
(70) 7211.13.00
(71) 7211.14.00
(72) 7211.19.15
(73) 7211.19.20
(74) 7211.19.30
(75) 7211.19.45
(76) 7211.19.60
(77) 7211.19.75
(78) 7211.23.15
(79) 7211.23.20
(80) 7211.23.30
(81) 7211.23.45
(82) 7211.23.60
(83) 7211.29.20
(84) 7211.29.45
(85) 7211.29.60
(86) 7211.90.00
(87) 7212.10.00
(88) 7212.20.00
(89) 7212.30.10
(90) 7212.30.30
(91) 7212.30.50
(92) 7212.40.10
(93) 7212.40.50
(94) 7212.50.00
(95) 7212.60.00
(96) 7213.10.00
(97) 7213.20.00
(98) 7213.91.30
(99) 7213.91.45
(100) 7213.91.60
(101) 7213.99.00
(102) 7214.20.00
(103) 7214.30.00
(104) 7214.91.00
(105) 7214.99.00
(106) 7215.10.00
(107) 7215.50.00
(108) 7215.90.10
(109) 7215.90.30
(110) 7215.90.50
(111) 7216.10.00
(112) 7216.21.00
(113) 7216.22.00
(114) 7216.31.00
(115) 7216.32.00
(116) 7216.33.00
(117) 7216.40.00
(118) 7216.50.00
(119) 7216.99.00
(120) 7217.10.10
(121) 7217.10.20
(122) 7217.10.30
(123) 7217.10.50
(124) 7217.10.60
(125) 7217.10.70
(126) 7217.10.80
(127) 7217.10.90
(128) 7217.20.15
(129) 7217.20.30
(130) 7217.20.45
(131) 7217.20.60
(132) 7217.20.75
(133) 7217.30.15
(134) 7217.30.30
(135) 7217.30.60
(136) 7217.30.75
(137) 7217.90.10
(138) 7217.90.50
(139) 7218.10.00
(140) 7218.91.00
(141) 7218.99.00
(142) 7219.11.00
(143) 7219.12.00
(144) 7219.13.00
(145) 7219.14.00
(146) 7219.21.00
(147) 7219.22.00
(148) 7219.23.00
(149) 7219.24.00
(150) 7219.31.00
(151) 7219.32.00
(152) 7219.33.00
(153) 7219.34.00
(154) 7219.35.00
(155) 7219.90.00
(156) 7220.12.10
(157) 7220.12.50
(158) 7220.20.10
(159) 7220.20.60
(160) 7220.20.70
(161) 7220.20.80
(162) 7220.90.00
(163) 7221.00.00
(164) 7222.11.00
(165) 7222.19.00
(166) 7222.20.00
(167) 7222.30.00
(168) 7222.40.30
(169) 7222.40.60
(170) 7223.00.10
(171) 7223.00.50
(172) 7223.00.90
(173) 7224.10.00
(174) 7224.90.00
(175) 7225.11.00
(176) 7225.19.00
(177) 7225.30.11
(178) 7225.30.30
(179) 7225.30.51
(180) 7225.30.70
(181) 7225.40.11
(182) 7225.40.30
(183) 7225.40.51
(184) 7225.40.70
(185) 7225.50.11
(186) 7225.50.60
(187) 7225.50.70
(188) 7225.50.80
(189) 7225.91.00
(190) 7225.92.00
(191) 7225.99.00
(192) 7226.11.10
(193) 7226.11.90
(194) 7226.19.10
(195) 7226.19.90
(196) 7226.20.00
(197) 7226.91.05
(198) 7226.91.15
(199) 7226.91.25
(200) 7226.91.50
(201) 7226.91.70
(202) 7226.91.80
(203) 7226.92.10
(204) 7226.92.30
(205) 7226.92.50
(206) 7226.92.70
(207) 7226.92.80
(208) 7226.99.01
(209) 7227.10.00
(210) 7227.20.00
(211) 7227.90.10
(212) 7227.90.20
(213) 7227.90.60
(214) 7228.20.10
(215) 7228.20.50
(216) 7228.30.40
(217) 7228.30.60
(218) 7228.30.80
(219) 7228.40.00
(220) 7228.50.10
(221) 7228.50.50
(222) 7228.60.10
(223) 7228.60.60
(224) 7228.60.80
(225) 7228.70.30
(226) 7228.70.60
(227) 7229.20.00
(228) 7229.90.10
(229) 7229.90.50
(230) 7229.90.90
(231) 7301.10.00
(232) 7302.10.10
(233) 7302.10.50
(234) 7302.40.00
(235) 7302.90.10
(236) 7302.90.90
(237) 7304.11.00
(238) 7304.19.10
(239) 7304.19.50
(240) 7304.22.00
(241) 7304.23.30
(242) 7304.23.60
(243) 7304.24.30
(244) 7304.24.40
(245) 7304.24.60
(246) 7304.29.10
(247) 7304.29.20
(248) 7304.29.31
(249) 7304.29.41

[[Page 76604]]

(250) 7304.29.50
(251) 7304.29.61
(252) 7304.31.30
(253) 7304.31.60
(254) 7304.39.00
(255) 7304.49.00
(256) 7304.51.10
(257) 7304.51.50
(258) 7304.59.10
(259) 7304.59.20
(260) 7304.59.60
(261) 7304.59.80
(262) 7304.90.10
(263) 7304.90.70
(264) 7305.11.10
(265) 7305.11.50
(266) 7305.12.10
(267) 7305.12.50
(268) 7305.19.10
(269) 7305.19.50
(270) 7305.20.20
(271) 7305.20.40
(272) 7305.20.60
(273) 7305.20.80
(274) 7305.31.20
(275) 7305.31.40
(276) 7305.31.60
(277) 7305.39.10
(278) 7305.39.50
(279) 7305.90.10
(280) 7305.90.50
(281) 7306.11.00
(282) 7306.19.10
(283) 7306.19.51
(284) 7306.21.30
(285) 7306.21.40
(286) 7306.21.80
(287) 7306.29.10
(288) 7306.29.20
(289) 7306.29.31
(290) 7306.29.41
(291) 7306.29.60
(292) 7306.29.81
(293) 7306.30.10
(294) 7306.30.30
(295) 7306.30.50
(296) 7306.40.10
(297) 7306.40.50
(298) 7306.50.10
(299) 7306.50.30
(300) 7306.50.50
(301) 7306.61.10
(302) 7306.61.30
(303) 7306.61.50
(304) 7306.61.70
(305) 7306.69.10
(306) 7306.69.30
(307) 7306.69.70
(308) 7306.90.10
(309) 7306.90.50
(310) 7601.10.30
(311) 7601.10.60
(312) 7601.20.30
(313) 7601.20.60
(314) 7601.20.90
(315) 7604.10.10
(316) 7604.10.30
(317) 7604.10.50
(318) 7604.21.00
(319) 7604.29.10
(320) 7604.29.30
(321) 7604.29.50
(322) 7605.11.00
(323) 7605.19.00
(324) 7605.21.00
(325) 7605.29.00
(326) 7606.11.30
(327) 7606.11.60
(328) 7606.12.30
(329) 7606.12.60
(330) 7606.91.30
(331) 7606.91.60
(332) 7606.92.30
(333) 7606.92.60
(334) 7607.11.30
(335) 7607.11.60
(336) 7607.11.90
(337) 7607.19.60
(338) 7607.20.10
(339) 7608.10.00
(340) 7608.20.00
(341) 7609.00.00
(342) 7901.11.00
(343) 7901.12.10
(344) 7901.12.50
(345) 7901.20.00
(346) 8001.10.00
(347) 8001.20.00
(348) 8101.10.00
(349) 8103.20.00
(350) 8112.21.00
(351) 8112.92.30
(352) 8507.90.40''.

    ``(c) Heading 9903.91.02 applies to products of China that are 
classified in the following 8-digit subheadings, effective with respect 
to goods entered for consumption, or withdrawn from warehouse for 
consumption, on or after 12:01 a.m. eastern daylight time on September 
27, 2024:

(1) 8541.42.00
(2) 8541.43.00''.

    ``(d) Heading 9903.91.03 applies to products of China that are 
classified in the following 8-digit subheadings, effective with respect 
to goods entered for consumption, or withdrawn from warehouse for 
consumption, on or after 12:01 a.m. eastern daylight time on September 
27, 2024:

(1) 8702.40.31
(2) 8702.40.61
(3) 8702.90.31
(4) 8702.90.61
(5) 8703.60.00
(6) 8703.70.00
(7) 8703.80.00
(8) 8703.90.01
(9) 9018.31.00
(10) 9018.32.00''.

    ``(e) Heading 9903.91.04 applies to facemasks of textiles, 
disposable, of China, described in statistical reporting number 
6307.90.9870, effective with respect to goods entered for consumption, 
or withdrawn from warehouse for consumption, on or after 12:01 a.m. 
eastern standard time on January 1, 2025, and before January 1, 2026.''
    ``(f) Heading 9903.91.05 applies to products of China that are 
classified in the following 8-digit subheadings, effective with respect 
to goods entered for consumption, or withdrawn from warehouse for 
consumption, on or after 12:01 a.m. eastern standard time on January 1, 
2025:

(1) 4015.12.10
(2) 8541.10.00
(3) 8541.21.00
(4) 8541.29.00
(5) 8541.30.00
(6) 8541.49.10
(7) 8541.49.70
(8) 8541.49.80
(9) 8541.49.95
(10) 8541.51.00
(11) 8541.59.00
(12) 8541.90.00
(13) 8542.31.00
(14) 8542.32.00
(15) 8542.33.00
(16) 8542.39.00
(17) 8542.90.00''.

    ``(g) Heading 9903.91.06 applies to products of China that are 
classified in the following 8-digit subheadings, effective with respect 
to goods entered for consumption, or withdrawn from warehouse for 
consumption, on or after 12:01 a.m. eastern standard time on January 1, 
2026:

(1) 2504.10.10
(2) 2504.10.50
(3) 2504.90.00
(4) 8505.11.00
(5) 8507.60.00''.

    ``(h) Heading 9903.91.07 applies to products of China that are 
described in the following 10-digit statistical reporting numbers, 
effective with respect to goods entered for consumption, or withdrawn 
from warehouse for consumption, on or after 12:01 a.m. eastern standard 
time on January 1, 2026:

(1) N95 respirators of textiles, described in statistical reporting 
numbers 6307.90.9842 or 6307.90.9844
(2) Respirators of textiles, other than N95 respirators, described in 
statistical reporting number 6307.90.9850
(3) Face masks of textiles, described in statistical reporting numbers 
6307.90.9870 or 6307.90.9875''.

    ``(i) Heading 9903.91.08 applies to products of China classified in 
8-digit subheading 4015.12.10, effective with respect to goods entered 
for consumption, or withdrawn from warehouse for consumption, on or 
after

[[Page 76605]]

12:01 a.m. eastern standard time on January 1, 2026.''
    5. Effective with respect to goods of China entered for 
consumption, or withdrawn from warehouse for consumption, on or after 
12:01 a.m. eastern daylight time on September 27, 2024, subchapter III 
of chapter 99 of the HTSUS is modified by inserting the following new 
heading 9903.92 and new subheadings 9903.92.10 and 9903.92.80 in 
numerical sequence, with the material in the new headings and 
subheadings inserted in the columns of the HTSUS labeled ``Heading/
Subheading'', ``Article Description'', ``Rates of Duty 1--General'', 
``Rates of Duty 1--Special'' and ``Rates of Duty 2'', respectively:

----------------------------------------------------------------------------------------------------------------
                                                                             Rates of duty
                                                     -----------------------------------------------------------
    Heading/ subheading        Article description                       1
                                                     ----------------------------------------          2
                                                            General             Special
----------------------------------------------------------------------------------------------------------------
``9903.92..................  Effective with respect
                              to entries, on or
                              after September 27,
                              2024, of overhead
                              traveling cranes,
                              transporter cranes,
                              gantry cranes, bridge
                              cranes and mobile
                              lifting frames, other
                              than overhead
                              traveling cranes on
                              fixed support and
                              other than mobile
                              lifting frames on
                              tires, articles the
                              product of China
                              (provided for in
                              subheading
                              8426.19.00):
9903.92.10.................  Except as provided in    The duty provided
                              heading 9903.91.09,      in the applicable
                              ship-to-shore gantry     subheading + 25%.
                              cranes, configured as
                              a high- or low-profile
                              steel superstructure
                              and designed to unload
                              intermodal containers
                              from vessels with
                              coupling devices for
                              containers, including
                              spreaders or twist-
                              locks (provided for in
                              subheading 8426.19.00).
9903.92.80.................  Other (provided for in   The duty provided
                              subheading 8426.19.00.   in the applicable
                                                       subheading''.
----------------------------------------------------------------------------------------------------------------

    6. Effective with respect to products of China that are entered for 
consumption, or withdrawn from warehouse for consumption, on or after 
12:01 a.m. eastern daylight time on September 27, 2024, and before May 
14, 2026, subchapter III of chapter 99 of the HTSUS is modified by 
inserting the following new heading 9903.91.09 in numerical sequence, 
with the material in the new heading inserted in the columns of the 
HTSUS labeled ``Heading/Subheading'', ``Article Description'', ``Rates 
of Duty 1--General'', ``Rates of Duty 1--Special'' and ``Rates of Duty 
2'', respectively:

----------------------------------------------------------------------------------------------------------------
                                                                             Rates of duty
                                                     -----------------------------------------------------------
    Heading/ subheading        Article description                       1
                                                     ----------------------------------------          2
                                                            General             Special
----------------------------------------------------------------------------------------------------------------
``9903.91.09...............  Notwithstanding          The duty provided
                              subheading 9903.92.10,   in the applicable
                              effective with respect   subheading''.
                              to entries, on or
                              after September 27,
                              2024, of ship-to-shore
                              gantry cranes,
                              configured as a high-
                              or low-profile steel
                              superstructure and
                              designed to unload
                              intermodal containers
                              from vessels with
                              coupling devices for
                              containers, including
                              spreaders or twist-
                              locks, articles the
                              product of China
                              (provided for in
                              subheading
                              8426.19.00), that are
                              fulfilling in whole or
                              in part an executed
                              contract for sale
                              dated prior to May 14,
                              2024 for goods that
                              are entered for
                              consumption, or
                              withdrawn from
                              warehouse for
                              consumption, in the
                              United States prior to
                              May 14, 2026.
----------------------------------------------------------------------------------------------------------------

    7. Effective with respect to products of China that are entered for 
consumption, or withdrawn from warehouse for consumption, on or after 
12:01 a.m. eastern daylight time on September 27, 2024, and before 
January 1, 2026, subchapter III of chapter 99 of the HTSUS is modified 
by inserting the following new heading 9903.91.10 in numerical 
sequence, with the material in the new heading inserted in the columns 
of the HTSUS labeled ``Heading/Subheading'', ``Article Description'', 
``Rates of Duty 1--General'', ``Rates of Duty 1--Special'' and ``Rates 
of Duty 2'', respectively:

[[Page 76606]]



----------------------------------------------------------------------------------------------------------------
                                                                             Rates of duty
                                                     -----------------------------------------------------------
    Heading/ subheading        Article description                       1
                                                     ----------------------------------------          2
                                                            General             Special
----------------------------------------------------------------------------------------------------------------
``9903.91.10...............  Notwithstanding heading  The duty provided
                              9903.91.03, effective    in the applicable
                              with respect to          subheading''.
                              entries of enteral
                              syringes, of China, on
                              or after September 27,
                              2024, and before
                              January 1, 2026
                              (described in
                              statistical reporting
                              number 9018.31.0080).
----------------------------------------------------------------------------------------------------------------

    8. Effective with respect to products of China that are entered for 
consumption, or withdrawn from warehouse for consumption, on or after 
12:01 a.m. eastern daylight time on January 1, 2024, and before June 1, 
2025, subchapter III of chapter 99 of the HTSUS is modified:
    (a) by inserting the following new heading 9903.88.70 in numerical 
sequence, with the material in the new heading inserted in the columns 
of the HTSUS labeled ``Heading/Subheading'', ``Article Description'', 
``Rates of Duty 1--General'', ``Rates of Duty 1--Special'' and ``Rates 
of Duty 2'', respectively:

----------------------------------------------------------------------------------------------------------------
                                                                             Rates of duty
                                                     -----------------------------------------------------------
    Heading/ subheading        Article description                       1
                                                     ----------------------------------------          2
                                                            General             Special
----------------------------------------------------------------------------------------------------------------
``9903.88.70...............  Effective with respect   The duty provided
                              to entries on or after   in the applicable
                              January 1, 2024, and     subheading''.
                              before June 1, 2025,
                              articles the product
                              of China, as provided
                              in U.S. note 20(www)
                              to this subchapter,
                              each covered by an
                              exclusion granted by
                              the U.S. Trade
                              Representative.
----------------------------------------------------------------------------------------------------------------

    (b) by inserting the following new U.S. note 20(www) to subchapter 
III of chapter 99 in numerical sequence:
    ``(www) The U.S. Trade Representative determined to establish a 
process by which particular products classified in heading 9903.88.02 
and provided for in U.S. notes 20(c) and (d) to this subchapter could 
be excluded from the additional duties imposed by heading 9903.88.02. 
See 83 FR 40823 (August 16, 2018) and 83 FR 47236 (September 18, 2018). 
Pursuant to the product exclusion process, the U.S. Trade 
Representative has determined that the additional duties imposed by 
heading 9903.88.02 and U.S. note 20(d) to this subchapter shall not 
apply to the products of China described herein and classified in the 
specified subheadings of heading 8486 of the tariff schedule, when such 
products of China are entered with a claim for the tariff treatment 
provided in heading 9903.88.70 of this subchapter:

(1) Silicon growth furnaces, including Czochralski crystal growth 
furnaces, designed for growing monocrystalline silicon ingots (boules) 
of a mass exceeding 700 kg, for use in solar wafer manufacturing 
(described in statistical reporting number 8486.10.0000)
(2) Band saws designed for cutting or slicing cylindrical 
monocrystalline silicon ingots (boules) of an initial mass exceeding 
400 kg into square or rectangular ingots (boules), for use in solar 
wafer manufacturing (described in statistical reporting number 
8486.10.0000)
(3) Machines designed to align and adhere square or rectangular 
monocrystalline silicon ingots (boules) of an initial mass exceeding 
200 kg to plastic support boards on metal mounting plates to provide 
support during diamond wire sawing, for use in solar wafer 
manufacturing (described in statistical reporting number 8486.10.0000)
(4) Diamond wire saws designed for cutting or slicing square or 
rectangular monocrystalline silicon ingots (boules) of an initial mass 
exceeding 400 kg into solar wafers of a thickness not exceeding 200 
micrometers (described in statistical reporting number 8486.10.0000)
(5) Wire guide roller machines, presented with diamond wire saws 
designed for slicing square or rectangular monocrystalline silicon 
ingots (boules) of an initial mass exceeding 400 kg into solar wafers 
of a thickness not exceeding 200 micrometers, all of the foregoing for 
use in solar wafer manufacturing (described in statistical reporting 
number 8486.10.0000)
(6) Coolant fluid recycling machines, presented with diamond wire saws 
designed for slicing square or rectangular monocrystalline silicon 
ingots (boules) of an initial mass exceeding 400 kg into solar wafers 
of a thickness not exceeding 200 micrometers, all of the foregoing for 
use in solar wafer manufacturing (described in statistical reporting 
number 8486.10.0000)
(7) Degumming machines designed to remove adhesives from solar wafers 
(described in statistical reporting number 8486.10.0000)
(8) Texturing, etching, polishing, and cleaning machines designed to 
prepare, repair, clean, etch, polish or texture the solar wafer 
substrate, whether or not integrated with automation equipment for 
transferring solar wafers from one process station to the next, all the 
foregoing for use in solar wafer manufacturing (described in 
statistical reporting number 8486.20.0000)
(9) Thermal diffusion quartz-tube furnaces, designed to diffuse dopant 
impurities into square or rectangular silicon wafers, whether or not 
integrated with automation equipment for transferring solar wafers from 
one process station to the next or boat loading or unloading machines, 
all the

[[Page 76607]]

foregoing for use in solar cell manufacturing (described in statistical 
reporting number 8486.20.0000)
(10) Plasma-enhanced or low-pressure chemical vapor deposition machines 
designed to deposit amorphous or nanocrystalline layers on one or both 
surfaces of a solar wafer, whether or not integrated with automation 
equipment for transferring solar wafers from one process station to the 
next, all the foregoing for use in solar cell manufacturing (described 
in statistical reporting number 8486.20.0000)
(11) Physical vapor deposition (PVD) machines, designed to deposit a 
thin film of transparent conducting oxide on one or both surfaces of a 
solar wafer, whether or not integrated with automation equipment for 
transferring solar wafers from one process station to the next, all the 
foregoing for use in solar cell manufacturing (described in statistical 
reporting number 8486.20.0000)
(12) Screen printing line machines, including sintering furnaces for 
printing conducting contacts on both surfaces of a solar wafer, whether 
or not integrated with automation equipment for transferring solar 
wafers from one process station to the next, and whether or not 
integrated with equipment for solar cell testing, all the foregoing for 
use in solar cell manufacturing (described in statistical reporting 
number 8486.20.0000)
(13) Machines designed for transporting polysilicon material to growth 
furnaces and machines designed for transporting monocrystalline ingots 
(boules) and wafers throughout the solar wafer manufacturing process, 
including machines for loading or unloading solar wafers during the 
diamond wire slicing process (described in statistical reporting number 
8486.40.0030)
(14) Machines designed for lifting, handling, loading, or unloading of 
solar wafers of a thickness not exceeding 200 micrometers, for use in 
solar wafer manufacturing (described in statistical reporting number 
8486.40.0030)
    9. Effective on September 27, 2024, subdivision (s)(i) of note 20 
to subchapter III of chapter 99 of the HTSUS is modified by deleting 
``6307.90.98'' and subdivision (s)(ii) of note 20 to subchapter III of 
chapter 99 of the HTSUS is modified by inserting the following in 
numerical order: ``5. Other made-up articles of textile materials, 
provided for in subheading 6307.90.98, except for respirators of 
textiles, described in statistical reporting numbers 6307.90.9842, 
6307.90.9844 or 6307.90.9850, and except for face masks of textiles, 
other than disposable, described in statistical reporting number 
6307.90.9875;''.
    10. Effective on September 27, 2024, subdivision (s)(i) of note 20 
to subchapter III of chapter 99 of the HTSUS is modified by deleting 
``8507.60.00'' and subdivision (s)(ii) of note 20 to subchapter III of 
chapter 99 of the HTSUS is modified by inserting the following in 
numerical order: ``6. Lithium-ion batteries, provided for in subheading 
8507.60.00, except for lithium-ion batteries of a kind used as the 
primary source of electrical power for electrically powered vehicles of 
subheadings 8703.40, 8703.50, 8703.60, 8703.70 or 8703.80, described in 
statistical reporting number 8507.60.0010''.
    11. Effective on September 27, 2024, note 20(b) to subchapter III 
of chapter 99 is modified by deleting the following 8-digit subheading 
numbers:

(1) 8702.40.31
(2) 8702.40.61
(3) 8702.90.31
(4) 8702.90.61
(5) 8703.60.00
(6) 8703.70.00
(7) 8703.80.00
(8) 8703.90.01

    12. Effective on September 27, 2024, note 20(d) to subchapter III 
of chapter 99 is modified by deleting the following 8-digit subheading 
numbers:

(1) 8541.42.00
(2) 8541.43.00

    13. Effective on September 27, 2024, note 20(s)(i) to subchapter 
III of chapter 99 is modified by deleting the following 8-digit 
subheading numbers:

(1) 7206.10.00
(2) 7206.90.00
(3) 7207.11.00
(4) 7207.12.00
(5) 7207.19.00
(6) 7207.20.00
(7) 7208.10.15
(8) 7208.10.30
(9) 7208.10.60
(10) 7208.25.30
(11) 7208.25.60
(12) 7208.26.00
(13) 7208.27.00
(14) 7208.36.00
(15) 7208.37.00
(16) 7208.38.00
(17) 7208.39.00
(18) 7208.40.30
(19) 7208.40.60
(20) 7208.51.00
(21) 7208.52.00
(22) 7208.53.00
(23) 7208.54.00
(24) 7208.90.00
(25) 7209.15.00
(26) 7209.16.00
(27) 7209.17.00
(28) 7209.18.15
(29) 7209.18.25
(30) 7209.18.60
(31) 7209.25.00
(32) 7209.26.00
(33) 7209.27.00
(34) 7209.28.00
(35) 7209.90.00
(36) 7210.11.00
(37) 7210.12.00
(38) 7210.30.00
(39) 7210.41.00
(40) 7210.49.00
(41) 7210.50.00
(42) 7210.61.00
(43) 7210.69.00
(44) 7210.70.30
(45) 7210.70.60
(46) 7210.90.10
(47) 7210.90.60
(48) 7210.90.90
(49) 7211.13.00
(50) 7211.14.00
(51) 7211.19.15
(52) 7211.19.20
(53) 7211.19.30
(54) 7211.19.45
(55) 7211.19.60
(56) 7211.19.75
(57) 7211.23.15
(58) 7211.23.20
(59) 7211.23.30
(60) 7211.23.45
(61) 7211.23.60
(62) 7211.29.20
(63) 7211.29.45
(64) 7211.29.60
(65) 7211.90.00
(66) 7212.10.00
(67) 7212.20.00
(68) 7212.30.10
(69) 7212.30.30
(70) 7212.30.50
(71) 7212.40.10
(72) 7212.40.50
(73) 7212.50.00
(74) 7212.60.00
(75) 7213.10.00
(76) 7213.20.00
(77) 7213.91.30
(78) 7213.91.45
(79) 7213.91.60
(80) 7213.99.00
(81) 7214.20.00
(82) 7214.30.00
(83) 7214.91.00
(84) 7214.99.00
(85) 7215.10.00
(86) 7215.50.00
(87) 7215.90.10
(88) 7215.90.50
(89) 7216.10.00

[[Page 76608]]

(90) 7216.21.00
(91) 7216.22.00
(92) 7216.31.00
(93) 7216.32.00
(94) 7216.33.00
(95) 7216.40.00
(96) 7216.50.00
(97) 7216.99.00
(98) 7217.10.10
(99) 7217.10.20
(100) 7217.10.30
(101) 7217.10.50
(102) 7217.10.60
(103) 7217.10.70
(104) 7217.10.80
(105) 7217.10.90
(106) 7217.20.15
(107) 7217.20.30
(108) 7217.20.45
(109) 7217.20.60
(110) 7217.20.75
(111) 7217.30.15
(112) 7217.30.30
(113) 7217.30.60
(114) 7217.30.75
(115) 7217.90.10
(116) 7217.90.50
(117) 7218.10.00
(118) 7218.91.00
(119) 7218.99.00
(120) 7219.11.00
(121) 7219.12.00
(122) 7219.13.00
(123) 7219.14.00
(124) 7219.21.00
(125) 7219.22.00
(126) 7219.23.00
(127) 7219.24.00
(128) 7219.31.00
(129) 7219.32.00
(130) 7219.33.00
(131) 7219.34.00
(132) 7219.35.00
(133) 7219.90.00
(134) 7220.12.10
(135) 7220.12.50
(136) 7220.20.10
(137) 7220.20.60
(138) 7220.20.70
(139) 7220.20.80
(140) 7220.90.00
(141) 7221.00.00
(142) 7222.11.00
(143) 7222.19.00
(144) 7222.20.00
(145) 7222.30.00
(146) 7222.40.30
(147) 7222.40.60
(148) 7223.00.10
(149) 7223.00.50
(150) 7223.00.90
(151) 7224.10.00
(152) 7224.90.00
(153) 7225.11.00
(154) 7225.19.00
(155) 7225.30.11
(156) 7225.30.30
(157) 7225.30.51
(158) 7225.30.70
(159) 7225.40.11
(160) 7225.40.30
(161) 7225.40.51
(162) 7225.40.70
(163) 7225.50.11
(164) 7225.50.60
(165) 7225.50.70
(166) 7225.50.80
(167) 7225.91.00
(168) 7225.92.00
(169) 7225.99.00
(170) 7226.11.10
(171) 7226.11.90
(172) 7226.19.10
(173) 7226.19.90
(174) 7226.20.00
(175) 7226.91.05
(176) 7226.91.15
(177) 7226.91.25
(178) 7226.91.50
(179) 7226.91.70
(180) 7226.91.80
(181) 7226.92.10
(182) 7226.92.30
(183) 7226.92.50
(184) 7226.92.70
(185) 7226.92.80
(186) 7226.99.01
(187) 7227.10.00
(188) 7227.20.00
(189) 7227.90.10
(190) 7227.90.20
(191) 7227.90.60
(192) 7228.20.10
(193) 7228.20.50
(194) 7228.30.40
(195) 7228.30.60
(196) 7228.30.80
(197) 7228.40.00
(198) 7228.50.10
(199) 7228.50.50
(200) 7228.60.10
(201) 7228.60.60
(202) 7228.60.80
(203) 7228.70.30
(204) 7228.70.60
(205) 7229.20.00
(206) 7229.90.10
(207) 7229.90.50
(208) 7229.90.90
(209) 7301.10.00
(210) 7302.10.10
(211) 7302.10.50
(212) 7302.90.10
(213) 7302.90.90
(214) 7304.11.00
(215) 7304.19.10
(216) 7304.19.50
(217) 7304.22.00
(218) 7304.23.60
(219) 7304.24.30
(220) 7304.24.40
(221) 7304.24.60
(222) 7304.29.10
(223) 7304.29.20
(224) 7304.29.31
(225) 7304.29.41
(226) 7304.29.50
(227) 7304.29.61
(228) 7304.31.30
(229) 7304.31.60
(230) 7304.39.00
(231) 7304.49.00
(232) 7304.51.10
(233) 7304.51.50
(234) 7304.59.10
(235) 7304.59.20
(236) 7304.59.60
(237) 7304.59.80
(238) 7304.90.10
(239) 7304.90.70
(240) 7305.11.10
(241) 7305.11.50
(242) 7305.12.10
(243) 7305.12.50
(244) 7305.19.10
(245) 7305.19.50
(246) 7305.20.20
(247) 7305.20.40
(248) 7305.20.60
(249) 7305.20.80
(250) 7305.31.20
(251) 7305.31.40
(252) 7305.31.60
(253) 7305.39.10
(254) 7305.39.50
(255) 7305.90.10
(256) 7305.90.50
(257) 7306.11.00
(258) 7306.19.10
(259) 7306.19.51
(260) 7306.21.30
(261) 7306.21.40
(262) 7306.21.80
(263) 7306.29.10
(264) 7306.29.20
(265) 7306.29.31
(266) 7306.29.41
(267) 7306.29.60
(268) 7306.29.81
(269) 7306.30.10
(270) 7306.30.30
(271) 7306.30.50
(272) 7306.40.10
(273) 7306.40.50
(274) 7306.50.10
(275) 7306.50.30
(276) 7306.50.50
(277) 7306.61.10
(278) 7306.61.30
(279) 7306.61.50
(280) 7306.61.70
(281) 7306.69.10
(282) 7306.69.30
(283) 7306.69.70
(284) 7306.90.10
(285) 7306.90.50
(286) 7601.10.30
(287) 7601.10.60
(288) 7601.20.30
(289) 7601.20.60
(290) 7601.20.90
(291) 7604.10.10
(292) 7604.10.30
(293) 7604.10.50
(294) 7604.21.00
(295) 7604.29.10
(296) 7604.29.30

[[Page 76609]]

(297) 7604.29.50
(298) 7605.11.00
(299) 7605.19.00
(300) 7605.21.00
(301) 7605.29.00
(302) 7606.11.30
(303) 7606.11.60
(304) 7606.12.30
(305) 7606.12.60
(306) 7606.91.30
(307) 7606.91.60
(308) 7606.92.30
(309) 7606.92.60
(310) 7607.11.30
(311) 7607.11.60
(312) 7607.11.90
(313) 7607.19.60
(314) 7607.20.10
(315) 7608.10.00
(316) 7608.20.00
(317) 7609.00.00
(318) 8507.90.40

    14. Effective on September 27, 2024, note 20(s)(ii)(4) to 
subchapter III of chapter 99 is modified by deleting ``9401.71.00031'' 
and by inserting ``9401.71.0031'' in lieu thereof.
    15. Effective on September 27, 2024, note 20(u)(i) to subchapter 
III of chapter 99 is modified by deleting the following 8-digit 
subheading numbers:

(1) 7210.20.00
(2) 7215.90.30
(3) 7302.40.00
(4) 7304.23.30

    16. Effective on January 1, 2025, note 20(b) to subchapter III of 
chapter 99 is modified by deleting the following 8-digit subheading 
numbers:

(1) 8541.21.00
(2) 8541.29.00
(3) 8541.30.00
(4) 8541.49.70
(5) 8541.49.80
(6) 8541.49.95
(7) 8541.51.00
(8) 8541.59.00
(9) 8541.90.00

    17. Effective on January 1, 2025, note 20(d) to subchapter III of 
chapter 99 is modified by deleting the following 8-digit subheading 
numbers:

(1) 8541.10.00
(2) 8541.49.10
(3) 8542.31.00
(4) 8542.32.00
(5) 8542.33.00
(6) 8542.39.00
(7) 8542.90.00

    18. Effective on January 1, 2025, note 20(s)(i) to subchapter III 
of chapter 99 is modified by deleting ``4015.12.10''.
    19. Effective on January 1, 2025, subparagraph 5 of subdivision 
(s)(ii) of note 20 to subchapter III of chapter 99 of the HTSUS is 
modified by deleting ``and except for face masks of textiles, other 
than disposable, described in statistical reporting number 
6307.90.9875'' and by inserting ``and except for face masks of 
textiles, described in statistical reporting numbers 6307.90.9870 or 
6307.90.9875'' in lieu thereof.
    20. Effective on January 1, 2026, subdivision (s)(ii) of note 20 to 
subchapter III of chapter 99 of the HTSUS is modified by deleting 
subparagraph number 6 and its associated tariff language. Subparagraph 
number 5 of such subdivision is modified by deleting the semicolon at 
the end of the subparagraph and inserting a period in lieu thereof.
    21. Effective on January 1, 2026, subdivision (b) of note 31 to 
subchapter III of chapter 99 of the HTSUS is modified by deleting 
subparagraph numbers 1, 2, 3, and 4, and their associated tariff 
language.
    22. Effective on January 1, 2026, subdivision (f) of note 31 to 
subchapter III of chapter 99 of the HTSUS is modified by deleting ``(1) 
4015.12.10''.
    23. Effective on January 1, 2024:

(1) subdivisions (c) and (d) of note 20 to subchapter III of chapter 99 
are each modified: (a) by deleting ``or (11)'' and by inserting 
``(11)'' in lieu thereof; and (b) by inserting ``or (12) heading 
9903.88.70 and U.S. note 20(www) to subchapter III of chapter 99'' 
after ``U.S. note 20(vvv)(ii) to subchapter III of chapter 99''; and
(2) the article description of heading 9903.88.02 is modified by 
deleting ``or 9903.88.69,'' and by inserting in lieu thereof 
``9903.88.69, or 9903.88.70,'' in lieu thereof.

Annex D--Importer Certification

    I hereby certify that:
    (A) My name is [IMPORTER OF RECORD OFFICIAL'S NAME] and I am an 
official of [NAME OF IMPORTER OF RECORD], located at [ADDRESS OF 
IMPORTER OF RECORD].
    (B) I hereby certify that the ship-to-shore crane(s) that was 
entered into the Customs territory of the United States under the entry 
summary number(s) identified below are fulfilling in whole or in part a 
contract for sale, purchase, or delivery in the United States of such 
ship-to-shore crane(s) that was in effect and dated as executed prior 
to May 14, 2024, that specifies that the ship-to-shore crane(s) is to 
be imported to or delivered within the United States before May 14, 
2026, and that has not been modified on or later than May 14, 2024, 
with regard to delivery date.
    (C) This certification applies to the following entries (repeat 
this block as many times as necessary):
    Entry Number:
    Applicable Line Item Number of the Entry (Declared Under 
9903.91.09, HTSUS):
    (D) I understand that [NAME OF IMPORTER OF RECORD] is required to 
provide U.S. Customs and Border Protection (CBP) with this 
certification at the time the entry summary is filed and that any 
additional supporting documentation must be provided upon request by 
CBP.

Signature
[NAME OF COMPANY OFFICIAL]
[TITLE OF COMPANY OFFICIAL]
Date

Annex E--Subheadings Eligible for Machinery Exclusion Process

------------------------------------------------------------------------
      HTSUS subheading                   Product description
------------------------------------------------------------------------
8417.10.00.................  Furnaces and ovens for the roasting,
                              melting or other heat treatment of ores,
                              pyrites or of metals.
8417.80.00.................  Industrial or laboratory furnaces and ovens
                              nesoi (not elsewhere specified or
                              included), including incinerators,
                              nonelectric.
8418.69.01.................  Refrigerating or freezing equipment nesoi.
8419.33.10.................  Lyophilization apparatus; freeze drying
                              units; spray dryers, for agricultural
                              products.
8419.33.50.................  Lyophilization apparatus; freeze drying
                              units; spray dryers, other than for
                              agricultural products, nesoi.
8419.34.00.................  Other dryers for agricultural products
                              (other than lyophilization apparatus;
                              freeze drying units; spray dryers).
8419.35.10.................  Dryers for wood.
8419.35.50.................  Dryers for paper pulp, paper or paperboard.
8419.39.02.................  Other dryers other than of a kind used for
                              domestic purposes, nesoi (other than
                              lyophilization apparatus; freeze drying
                              units; spray dryers).
8419.40.00.................  Distilling or rectifying plant, not used
                              for domestic purposes.
8419.50.10.................  Brazed aluminum plate-fin heat exchangers.
8419.50.50.................  Heat exchange units, nesoi.
8419.60.10.................  Machinery for liquefying air or gas
                              containing brazed aluminum plate-fin heat
                              exchangers.
8419.60.50.................  Machinery for liquefying air or gas, nesoi.

[[Page 76610]]

 
8419.89.10.................  Machinery and equipment for the treatment
                              of materials (by a process which changes
                              temperatures), for making paper pulp,
                              paper or paperboard.
8419.89.60.................  Industrial machinery, plant or equip. for
                              the treat. of mat., involving a change in
                              temp., for molten-salt-cooled acrylic acid
                              reactors.
8419.89.95.................  Industrial machinery, plant or equipment
                              for the treatment of materials, by process
                              involving a change in temperature, nesoi.
8420.10.10.................  Textile calendering or rolling machines.
8420.10.20.................  Calendering or similar rolling machines for
                              making paper pulp, paper or paperboard.
8420.10.90.................  Calendering or other rolling machines,
                              other than for metals or glass, nesoi.
8420.91.10.................  Cylinders for textile calendering or
                              rolling machines.
8420.91.20.................  Cylinders for paper pulp, paper or
                              paperboard calendering or rolling
                              machines.
8420.91.90.................  Cylinders for calendering and similar
                              rolling machines, nesoi.
8421.21.00.................  Machinery and apparatus for filtering or
                              purifying water.
8421.29.00.................  Filtering or purifying machinery and
                              apparatus for liquids, nesoi.
8421.39.01.................  Filtering or purifying machinery and
                              apparatus for gases, other than intake air
                              filters or catalytic conv. for internal
                              combustion engines.
8422.19.00.................  Dishwashing machines other than of the
                              household type.
8422.20.00.................  Machinery for cleaning or drying bottles or
                              other containers.
8422.30.11.................  Can-sealing machines.
8422.30.91.................  Machinery for filling, closing, sealing,
                              capsuling or labeling bottles, cans, boxes
                              or other containers; machinery for
                              aerating beverages; nesoi.
8422.40.11.................  Machinery for packing or wrapping pipe
                              tobacco, candy and cigarette packages;
                              combination candy cutting and wrapping
                              machines.
8422.40.91.................  Packing or wrapping machinery, nesoi.
8428.70.00.................  Industrial robots.
8429.11.00.................  Self-propelled bulldozers and angledozers,
                              for track laying.
8429.19.00.................  Self-propelled bulldozers and angledozers
                              other than track laying.
8429.20.00.................  Self-propelled graders and levelers.
8429.30.00.................  Self-propelled scrapers.
8429.40.00.................  Self-propelled tamping machines and road
                              rollers.
8429.51.10.................  Self-propelled front-end shovel loaders,
                              wheel-type.
8429.51.50.................  Self-propelled front-end shovel loaders,
                              other than wheel-type.
8429.52.10.................  Self-propelled backhoes, shovels,
                              clamshells and draglines with a 360 degree
                              revolving superstructure.
8429.52.50.................  Self-propelled machinery with a 360 degree
                              revolving superstructure, other than
                              backhoes, shovels, clamshells and
                              draglines.
8429.59.10.................  Self-propelled backhoes, shovels,
                              clamshells and draglines not with a 360
                              degree revolving superstructure.
8429.59.50.................  Self-propelled machinery not with a 360
                              degree revolving superstructure, other
                              than backhoes, shovels, clamshells and
                              draglines.
8430.10.00.................  Pile-drivers and pile-extractors.
8430.31.00.................  Self-propelled coal or rock cutters and
                              tunneling machinery.
8430.39.00.................  Coal or rock cutters and tunneling
                              machinery, not self-propelled.
8430.41.00.................  Self-propelled boring or sinking machinery.
8430.49.40.................  Offshore oil and natural gas drilling and
                              production platforms.
8430.49.80.................  Boring or sinking machinery, not self-
                              propelled, nesoi.
8430.50.10.................  Self-propelled peat excavators.
8430.50.50.................  Self-propelled machinery for working earth,
                              minerals or ores, nesoi.
8430.61.00.................  Tamping or compacting machinery, not self-
                              propelled.
8430.69.01.................  Machinery for working earth, minerals or
                              ores, not self-propelled, nesoi.
8432.10.00.................  Plows for soil preparation or cultivation.
8432.21.00.................  Disc harrows for soil preparation or
                              cultivation.
8432.29.00.................  Harrows (other than disc), scarifiers,
                              cultivators, weeders and hoes for soil
                              preparation or cultivation.
8432.31.00.................  No-till direct seeders, planters and
                              transplanters.
8432.39.00.................  Seeders, planters and transplanters, nesoi.
8432.41.00.................  Manure spreaders.
8432.42.00.................  Fertilizer distributors.
8432.80.00.................  Agricultural, horticultural or forestry
                              machinery for soil preparation or
                              cultivation, nesoi; lawn or sports ground
                              rollers.
8433.30.00.................  Haymaking machinery other than mowers.
8433.40.00.................  Straw or fodder balers, including pick-up
                              balers.
8433.51.00.................  Combine harvester-threshers.
8433.52.00.................  Threshing machinery other than combine
                              harvester-threshers.
8433.53.00.................  Root or tuber harvesting machines.
8433.59.00.................  Harvesting machinery or threshing
                              machinery, nesoi.
8433.60.00.................  Machines for cleaning, sorting or grading
                              eggs, fruit or other agricultural produce.
8435.10.00.................  Presses, crushers and similar machinery
                              used in the manufacture of wine, cider,
                              fruit juices or similar beverages.
8436.10.00.................  Machinery for preparing animal feeds.
8436.21.00.................  Poultry incubators and brooders.
8436.29.00.................  Poultry-keeping machinery.
8436.80.00.................  Agricultural, horticultural, forestry or
                              bee-keeping machinery, nesoi.
8437.10.00.................  Machines for cleaning, sorting or grading
                              seed, grain or dried leguminous
                              vegetables.
8437.80.00.................  Machinery used in the milling industry or
                              for the working of cereals or dried
                              leguminous vegetables, other than farm
                              type machinery.
8438.10.00.................  Bakery machinery and machinery for the
                              manufacture of macaroni, spaghetti or
                              similar products, nesoi.
8438.20.00.................  Machinery for the manufacture of
                              confectionery, cocoa or chocolate, nesoi.
8438.30.00.................  Machinery for sugar manufacture, nesoi.

[[Page 76611]]

 
8438.40.00.................  Brewery machinery, nesoi.
8438.50.00.................  Machinery for the preparation of meat or
                              poultry, nesoi.
8438.60.00.................  Machinery for the preparation of fruits,
                              nuts or vegetables, nesoi.
8438.80.00.................  Machinery for the industrial preparation or
                              manufacture of food or drink, nesoi.
8439.10.00.................  Machinery for making pulp of fibrous
                              cellulosic material.
8439.20.00.................  Machinery for making paper or paperboard.
8439.30.00.................  Machinery for finishing paper or
                              paperboard.
8441.10.00.................  Cutting machines of all kinds used for
                              making up paper pulp, paper or paperboard.
8441.20.00.................  Machines for making bags, sacks or
                              envelopes of paper pulp, paper or
                              paperboard.
8441.30.00.................  Machines for making cartons, boxes, cases,
                              tubes, drums or similar containers, other
                              than by molding, of paper pulp, paper or
                              paperboard.
8441.40.00.................  Machines for molding articles in paper
                              pulp, paper or paperboard.
8441.80.00.................  Machinery for making up paper pulp, paper
                              or paperboard, nesoi.
8442.30.01.................  Machinery, apparatus and equipment of
                              heading 8442.
8442.50.10.................  Printing plates.
8442.50.90.................  Printing type, blocks, cylinders and other
                              printing components; blocks, cylinders and
                              lithographic stones, prepared for printing
                              purposes.
8443.19.30.................  Printing machinery, nesoi.
8444.00.00.................  Machines for extruding, drawing, texturing
                              or cutting man-made textile materials.
8445.11.00.................  Carding machines for preparing textile
                              fibers.
8445.12.00.................  Combing machines for preparing textile
                              fibers.
8445.13.00.................  Drawing or roving machines for preparing
                              textile fibers.
8445.19.00.................  Machines for preparing textile fibers,
                              nesoi.
8445.20.00.................  Textile spinning machines.
8445.30.00.................  Textile doubling or twisting machines.
8445.40.00.................  Textile winding (including weft-winding) or
                              reeling machines.
8445.90.00.................  Machinery for producing textile yarns
                              nesoi; machines for preparing textile
                              yarns for use on machines of heading 8446
                              or 8447.
8446.10.00.................  Weaving machines (looms) for weaving
                              fabrics of a width not exceeding 30 cm.
8446.21.50.................  Shuttle type power looms for weaving
                              fabrics of a width exceeding 30 cm, but
                              not exceeding 4.9 m.
8446.29.00.................  Weaving machines for weaving fabrics of a
                              width exceeding 30 cm, shuttle type,
                              nesoi.
8446.30.10.................  Shuttleless type power looms, for weaving
                              fabrics of a width exceeding 4.9 m, nesoi.
8446.30.50.................  Shuttleless type weaving machines (looms),
                              for weaving fabrics of a width exceeding
                              30 cm, nesoi.
8447.11.10.................  Circular knitting machines with cylinder
                              diameter not exceeding 165 mm, for
                              knitting hosiery.
8447.11.90.................  Circular knitting machines with cylinder
                              diameter not exceeding 165 mm, other than
                              for knitting hosiery.
8447.12.10.................  Circular knitting machines with cylinder
                              diameter exceeding 165 mm, for knitting
                              hosiery.
8447.12.90.................  Circular knitting machines with cylinder
                              diameter exceeding 165 mm, other than for
                              knitting hosiery.
8447.20.20.................  V-bed flat knitting machines, power driven,
                              over 50.8 mm in width.
8447.20.30.................  V-bed flat knitting machines, nesoi.
8447.20.40.................  Warp knitting machines.
8447.20.60.................  Flat knitting machines, other than V-bed or
                              warp; stitch-bonding machines.
8447.90.10.................  Braiding and lace-braiding machines.
8447.90.50.................  Embroidery machines.
8447.90.90.................  Knitting machines other than circular or
                              flat knitting; machines for making gimped
                              yarn, tulle, trimmings or net; machines
                              for tufting.
8448.11.00.................  Dobbies and Jacquards, card reducing,
                              copying, punching or assembling machines
                              for use with machines of heading 8444,
                              8445, 8446 or 8447.
8448.19.00.................  Auxiliary machinery for machines of heading
                              8444, 8445, 8446 or 8447, nesoi.
8448.31.00.................  Card clothing as parts and accessories of
                              machines of heading 8445 or of their
                              auxiliary machinery.
8448.33.00.................  Spindles, spindle flyers, spinning rings
                              and ring travellers of machines of heading
                              8445 or of their auxiliary machines.
8448.42.00.................  Reeds for looms, healds and heald-frames of
                              weaving machines (looms) or their
                              auxiliary machinery.
8448.51.10.................  Latch needles for knitting machines.
8448.51.20.................  Spring-beard needles for knitting machines.
8448.51.30.................  Needles for knitting machines other than
                              latch needles or spring-beard needles.
8448.51.50.................  Sinkers, needles and other articles used to
                              form stitches, nesoi, for machines of
                              heading 8447.
8449.00.10.................  Finishing machinery for felt or nonwovens
                              and parts thereof.
8449.00.50.................  Machinery for making felt hats; blocks for
                              making hats; parts thereof.
8451.29.00.................  Drying machines for yarns, fabrics or made
                              up textile articles, each of a dry linen
                              capacity exceeding 10 kg.
8451.30.00.................  Ironing machines and presses (including
                              fusing presses) for textile fabrics or
                              made up textile articles.
8451.40.00.................  Washing, bleaching or dyeing machines for
                              textile yarns, fabrics or made up textile
                              articles.
8451.50.00.................  Machines for reeling, unreeling, folding,
                              cutting or pinking textile fabrics.
8451.80.00.................  Machinery for the handling of textile
                              yarns, fabrics or made up textile
                              articles, nesoi.
8452.21.10.................  Sewing machines specially designed to join
                              footwear soles to uppers, automatic.
8452.21.90.................  Sewing machines, automatic, nesoi.
8452.29.10.................  Sewing machines, other than automatic,
                              specially designed to join footwear soles
                              to uppers.
8452.29.90.................  Sewing machines, other than automatic,
                              nesoi.
8453.10.00.................  Machinery for preparing, tanning or working
                              hides, skins or leather.
8453.20.00.................  Machinery for making or repairing footwear.
8453.80.00.................  Machinery, nesoi, for making or repairing
                              articles of hides, skins or leather.
8454.10.00.................  Converters of a kind used in metallurgy or
                              in metal foundries.
8454.20.00.................  Ingot molds and ladles, of a kind used in
                              metallurgy or in metal foundries.
8454.30.00.................  Casting machines, of a kind used in
                              metallurgy or in metal foundries.
8455.10.00.................  Metal-rolling tube mills.
8455.21.00.................  Metal-rolling mills, other than tube mills,
                              hot or combination hot and cold.

[[Page 76612]]

 
8455.22.00.................  Metal-rolling mills, other than tube mills,
                              cold.
8455.30.00.................  Rolls for metal-rolling mills.
8456.11.10.................  Machine tools operated by laser, for
                              working metal.
8456.11.70.................  Machine tools operated by laser, of a kind
                              used solely or principally for manufacture
                              of printed circuits.
8456.11.90.................  Machine tools operated by laser, nesoi.
8456.12.10.................  Machine tools operated by light or photon
                              beam processes, for working metal.
8456.12.70.................  Machine tools operated by light or photon
                              beam processes, of a kind used solely or
                              principally for the manufacture of printed
                              circuits.
8456.12.90.................  Machine tools operated by light or photon
                              beam processes, nesoi.
8456.20.10.................  Machine tools operated by ultrasonic
                              processes, for working metal.
8456.20.50.................  Machine tools operated by ultrasonic
                              processes, other than for working metal.
8456.30.10.................  Machine tools operated by electro-discharge
                              processes, for working metal.
8456.30.50.................  Machine tools operated by electro-discharge
                              processes, other than for working metal.
8456.40.10.................  Machine tools operated by plasma arc
                              process, for working metal.
8456.40.90.................  Machine tools operated by plasma arc
                              process, other than for working metal.
8456.50.00.................  Water-jet cutting machines.
8456.90.31.................  Machine tools operated by electro-chemical
                              or ionic-beam processes, for working
                              metal.
8456.90.71.................  Machine tools operated by electro-chemical
                              or ionic-beam processes, other than for
                              working metal.
8457.10.00.................  Machining centers for working metal.
8457.20.00.................  Unit construction machines (single
                              station), for working metal.
8457.30.00.................  Multistation transfer machines for working
                              metal.
8458.11.00.................  Horizontal lathes (including turning
                              centers) for removing metal, numerically
                              controlled.
8458.19.00.................  Horizontal lathes (including turning
                              centers) for removing metal, other than
                              numerically controlled.
8458.91.10.................  Vertical turret lathes (including turning
                              centers) for removing metal, numerically
                              controlled.
8458.91.50.................  Lathes (including turning centers), other
                              than horizontal or vertical turret lathes,
                              for removing metal, numerically
                              controlled.
8458.99.10.................  Vertical turret lathes (including turning
                              centers) for removing metal, other than
                              numerically controlled.
8458.99.50.................  Lathes (including turning centers), other
                              than horizontal or vertical turret lathes,
                              for removing metal, other than numerically
                              controlled.
8459.10.00.................  Way-type unit head machines for drilling,
                              boring, milling, threading or tapping by
                              removing metal, other than lathes of
                              heading 8458.
8459.21.00.................  Drilling machines, numerically controlled,
                              nesoi.
8459.29.00.................  Drilling machines, other than numerically
                              controlled, nesoi.
8459.31.00.................  Boring-milling machines, numerically
                              controlled, nesoi.
8459.39.00.................  Boring-milling machines, other than
                              numerically controlled, nesoi.
8459.41.00.................  Boring machines, numerically controlled,
                              nesoi.
8459.49.00.................  Boring machines, not numerically
                              controlled, nesoi.
8459.51.00.................  Milling machines, knee type, numerically
                              controlled, nesoi.
8459.59.00.................  Milling machines, knee type, other than
                              numerically controlled, nesoi.
8459.61.00.................  Milling machines, other than knee type,
                              numerically controlled, nesoi.
8459.69.00.................  Milling machines, other than knee type,
                              other than numerically controlled, nesoi.
8459.70.40.................  Other threading or tapping machines,
                              numerically controlled.
8459.70.80.................  Other threading or tapping machines nesoi.
8460.12.00.................  Flat-surface grinding machines, numerically
                              controlled.
8460.19.01.................  Flat-surface grinding machines, not
                              numerically controlled.
8460.22.00.................  Centerless grinding machines, numerically
                              controlled.
8460.23.00.................  Other cylindrical grinding machines,
                              numerically controlled.
8460.24.00.................  Other grinding machines, numerically
                              controlled.
8460.29.01.................  Other grinding machines, other than
                              numerically controlled.
8460.31.00.................  Sharpening (tool or cutter grinding)
                              machines for working metal or cermets,
                              numerically controlled.
8460.39.00.................  Sharpening (tool or cutter grinding)
                              machines for working metal or cermets,
                              other than numerically controlled.
8460.40.40.................  Honing or lapping machines for working
                              metal or cermets, numerically controlled.
8460.40.80.................  Honing or lapping machines for working
                              metal or cermets, other than numerically
                              controlled.
8460.90.40.................  Other machine tools for deburring,
                              polishing or otherwise finishing metal or
                              cermets, nesoi, numerically controlled.
8460.90.80.................  Other machine tools for deburring,
                              polishing or otherwise finishing metal or
                              cermets, nesoi, other than numerically
                              controlled.
8461.20.40.................  Shaping or slotting machines for working by
                              removing metal or cermets, numerically
                              controlled.
8461.20.80.................  Shaping or slotting machines for working by
                              removing metal or cermets, other than
                              numerically controlled.
8461.30.40.................  Broaching machines for working by removing
                              metal or cermets, numerically controlled.
8461.30.80.................  Broaching machines for working by removing
                              metal or cermets, other than numerically
                              controlled.
8461.40.10.................  Gear cutting machines for working by
                              removing metal or cermets.
8461.40.50.................  Gear grinding or finishing machines for
                              working by removing metal or cermets.
8461.50.40.................  Sawing or cutting-off machines for working
                              by removing metal or cermets, numerically
                              controlled.
8461.50.80.................  Sawing or cutting-off machines for working
                              by removing metal or cermets, other than
                              numerically controlled.
8461.90.30.................  Machine-tools for working by removing metal
                              or cermets, nesoi, numerically controlled.
8461.90.60.................  Machine-tools for working by removing metal
                              or cermets, nesoi, other than numerically
                              controlled.
8462.11.00.................  Hot forming machines for forging, die
                              forging (including presses) and hot
                              hammers, closed die forging machines.
8462.19.00.................  Other hot forming machines for forging, die
                              forging (including presses) and hot
                              hammers (other than closed die forging
                              machines), nesoi.
8462.22.00.................  Profile forming machines.
8462.23.00.................  Numerically controlled press brakes.
8462.24.00.................  Numerically controlled panel benders.
8462.25.00.................  Numerically controlled roll forming
                              machines.
8462.26.00.................  Other numerically controlled bending,
                              folding, straightening or flattening
                              machines (o/t press brakes, panel benders,
                              roll forming machines).

[[Page 76613]]

 
8462.29.00.................  Other bending folding straightening or
                              flattening machines (other than
                              numerically controlled or profile forming
                              machines), nesoi.
8462.32.10.................  Numerically controlled sitting lines and
                              cut-to-length lines.
8462.32.50.................  Sitting lines and cut-to-length lines
                              (other than numerically controlled),
                              nesoi.
8462.33.00.................  Numerically controlled shearing machines.
8462.39.00.................  Shearing machines (other than numerically
                              controlled), nesoi.
8462.42.00.................  Numerically controlled punching, notching
                              or nibbling machines (excluding presses)
                              for flat products.
8462.49.00.................  Other punching, notching or nibbling
                              machines (excluding presses) for flat
                              products, other than numerically
                              controlled.
8462.51.00.................  Numerically controlled machines for working
                              tube, pipe, hollow section and bar
                              (excluding presses).
8462.59.00.................  Other machines for working tube, pipe,
                              hollow section and bar (excluding
                              presses), other than numerically
                              controlled.
8462.61.40.................  Hydraulic presses, numerically controlled.
8462.61.80.................  Hydraulic presses, not numerically
                              controlled.
8462.62.40.................  Numerically controlled mechanical cold
                              metal working presses.
8462.62.50.................  Other mechanical cold metal working
                              presses, other than numerically
                              controlled.
8462.63.40.................  Numerically controlled cold metal working
                              servo-presses.
8462.63.80.................  Other cold metal working servo-presses,
                              other than numerically controlled.
8462.69.40.................  Numerically controlled other cold metal
                              working presses, nesoi.
8462.69.80.................  Other cold metal working presses, other
                              than numerically controlled, nesoi.
8462.90.40.................  Other numerically controlled machines tools
                              for working metal, nesoi.
8462.90.80.................  Other machines tools for working metal,
                              other than numerically controlled, nesoi.
8463.10.00.................  Draw-benches for bars, tubes, profiles,
                              wire or the like, for working metal or
                              cermets, without removing material.
8463.20.00.................  Thread rolling machines for working metal
                              or cermets, without removing material.
8463.30.00.................  Machines for working wire of metal or
                              cermets, without removing material.
8463.90.00.................  Machine tools for working metal or cermets,
                              without removing material, nesoi.
8464.10.01.................  Sawing machines for working stone,
                              ceramics, concrete, asbestos-cement or
                              like mineral materials or for cold working
                              glass.
8464.20.01.................  Grinding or polishing machines for working
                              stone, ceramics, concrete, asbestos-cement
                              or like mineral materials, or glass,
                              nesoi.
8464.90.01.................  Machine tools for working stone, ceramics,
                              concrete, asbestos-cement or like mineral
                              materials or for cold working glass,
                              nesoi.
8465.10.00.................  Machines for working certain hard materials
                              which can carry out different types of
                              machining operations w/o tool change
                              between operations.
8465.20.10.................  Machine centers for sawing, planing,
                              milling, molding, grinding, sanding,
                              polishing, drilling or mortising.
8465.20.50.................  Machine centers for bending or assembling.
8465.20.80.................  Machine centers, nesoi.
8465.91.00.................  Sawing machines for working wood, cork,
                              bone, hard rubber, hard plastics or
                              similar hard materials.
8465.92.00.................  Planing, milling or molding (by cutting)
                              machines for working wood, cork, bone,
                              hard rubber, hard plastics or similar hard
                              materials.
8465.93.00.................  Grinding, sanding or polishing machines for
                              working wood, cork, bone, hard rubber,
                              hard plastics or similar hard materials.
8465.94.00.................  Bending or assembling machines for working
                              wood, cork, bone hard rubber, hard
                              plastics or similar hard materials.
8465.95.00.................  Drilling or mortising machines for working
                              wood, cork, bone, hard rubber, hard
                              plastics or similar hard materials.
8465.96.00.................  Splitting, slicing or paring machines for
                              working wood, cork, bone, hard rubber,
                              hard plastics or similar hard materials.
8465.99.02.................  Machine tools for working wood, cork, bone,
                              hard rubber, hard plastics and similar
                              hard materials, nesoi.
8468.20.10.................  Gas-operated machinery, apparatus and
                              appliances, hand-directed or -controlled,
                              used for soldering, brazing, welding or
                              tempering, nesoi.
8468.20.50.................  Gas-operated machinery, apparatus and
                              appliances, not hand-directed or -
                              controlled, used for soldering, brazing,
                              welding or tempering, nesoi.
8468.80.10.................  Machinery and apparatus, hand-directed or -
                              controlled, used for soldering, brazing or
                              welding, not gas-operated.
8468.80.50.................  Machinery and apparatus other than hand-
                              directed or -controlled, used for
                              soldering, brazing or welding, not gas-
                              operated.
8474.10.00.................  Sorting, screening, separating or washing
                              machines for earth, stones, ores or other
                              mineral substances in solid form.
8474.20.00.................  Crushing or grinding machines for earth,
                              stones, ores or other mineral substances.
8474.31.00.................  Concrete or mortar mixers.
8474.32.00.................  Machines for mixing mineral substances with
                              bitumen.
8474.39.00.................  Mixing or kneading machines for earth,
                              stones, ores or other mineral substances,
                              nesoi.
8474.80.00.................  Machinery for agglomerating, shaping or
                              molding solid mineral fuels, or other
                              mineral products; machines for forming
                              sand foundry molds.
8475.10.00.................  Machines for assembling electric or
                              electronic lamps, tubes or flashbulbs, in
                              glass envelopes.
8475.21.00.................  Machines for making glass optical fibers
                              and preforms thereof.
8475.29.00.................  Machines for manufacturing or hot working
                              glass or glassware, nesoi.
8477.10.30.................  Injection-molding machines for
                              manufacturing shoes of rubber or plastics.
8477.10.40.................  Injection-molding machines for use in the
                              manufacture of video laser discs.
8477.10.90.................  Injection-molding machines of a type used
                              for working or manufacturing products from
                              rubber or plastics, nesoi.
8477.20.00.................  Extruders for working rubber or plastics or
                              for the manufacture of products from these
                              materials, nesoi.
8477.30.00.................  Blow-molding machines for working rubber or
                              plastics or for the manufacture of
                              products from these materials.
8477.40.01.................  Vacuum-molding and other thermoforming
                              machines for working rubber or plastics or
                              for manufacture of products from these
                              materials, nesoi.
8477.51.00.................  Machinery for molding or retreading
                              pneumatic tires or for molding or
                              otherwise forming inner tubes.
8477.59.01.................  Machinery for molding or otherwise forming
                              rubber or plastics other than for molding
                              or retreading pneumatic tires, nesoi.
8477.80.01.................  Machinery for working rubber or plastics or
                              for the manufacture of products from these
                              materials, nesoi.
8478.10.00.................  Machinery for preparing or making up
                              tobacco, nesoi.
8479.10.00.................  Machinery for public works, building or the
                              like, nesoi.
8479.20.00.................  Machinery for the extraction or preparation
                              of animal or fixed vegetable fats or oils,
                              nesoi.

[[Page 76614]]

 
8479.30.00.................  Presses for making particle board or fiber
                              building board of wood or other ligneous
                              materials, and mach. for treat. wood or
                              cork, nesoi.
8479.40.00.................  Rope- or cable-making machines nesoi.
8479.50.00.................  Industrial robots, nesoi.
8479.81.00.................  Machines and mechanical appliances for
                              treating metal, including electric wire
                              coil-winders, nesoi.
8479.82.00.................  Machines for mixing, kneading, crushing,
                              grinding, screening, sifting,
                              homogenizing, emulsifying or stirring,
                              nesoi.
8479.83.00.................  Cold isostatic presses, nesoi.
8479.89.83.................  Machines for the manufacture of optical
                              media.
8479.89.92.................  Automated electronic component placement
                              machines for making printed circuit
                              assemblies.
8479.89.95.................  Other machines and mechanical appliances
                              having individual functions, not specified
                              or included elsewhere in chapter 84,
                              nesoi.
8486.10.00.................  Machines and apparatus for the manufacture
                              of boules or wafers.
8486.20.00.................  Machines and apparatus for the manufacture
                              of semiconductor devices or electronic
                              integrated circuits.
8486.30.00.................  Machines and apparatus for the manufacture
                              of flat panel displays.
8486.40.00.................  Machines and apparatus for the manufacture
                              of masks and reticles and for the assembly
                              of electronic integrated circuits.
8514.11.00.................  Hot isostatic presses.
8514.19.00.................  Other resistance heated industrial or
                              laboratory furnaces and ovens, other than
                              hot isostatic presses.
8514.20.40.................  Industrial or laboratory microwave ovens
                              for making hot drinks or for cooking or
                              heating food.
8514.20.60.................  Industrial or laboratory microwave ovens,
                              nesoi.
8514.20.80.................  Industrial or laboratory furnaces and ovens
                              (other than microwave) functioning by
                              induction or dielectric loss.
8514.31.10.................  Electron beam furnaces for making printed
                              circuits or printed circuit assemblies.
8514.31.90.................  Electron beam furnaces, other than for
                              making printed circuits or printed circuit
                              assemblies.
8514.32.10.................  Plasma and vacuum arc furnaces for making
                              printed circuits or printed circuit
                              assemblies.
8514.32.90.................  Plasma and vacuum arc furnaces, other than
                              for making printed circuits or printed
                              circuit assemblies.
8514.39.10.................  Other industrial furnaces and ovens for
                              making printed circuits or printed circuit
                              assemblies.
8514.39.90.................  Other industrial or laboratory electric
                              industrial or laboratory furnaces and
                              ovens nesoi.
8514.40.00.................  Industrial or laboratory induction or
                              dielectric heating equipment nesoi.
8515.11.00.................  Electric soldering irons and guns.
8515.19.00.................  Electric brazing or soldering machines and
                              apparatus, other than soldering irons and
                              guns.
8515.21.00.................  Electric machines and apparatus for
                              resistance welding of metal, fully or
                              partly automatic.
8515.29.00.................  Electric machines and apparatus for
                              resistance welding of metal, other than
                              fully or partly automatic.
8515.31.00.................  Electric machines and apparatus for arc
                              (including plasma arc) welding of metals,
                              fully or partly automatic.
8515.39.00.................  Electric machines and apparatus for arc
                              (including plasma arc) welding of metals,
                              other than fully or partly automatic.
8515.80.00.................  Electric welding apparatus nesoi,and
                              electric machines and apparatus for hot
                              spraying metals or sintered metal
                              carbides.
8543.30.20.................  Electrical machines and apparatus for
                              electroplating, electrolysis, or
                              electrophoresis for making printed
                              circuits.
8543.30.90.................  Other electrical machines and apparatus for
                              electroplating, electrolysis, or
                              electrophoresis.
8543.70.20.................  Physical vapor deposition apparatus, nesoi.
8543.70.60.................  Electrical machines and apparatus nesoi,
                              designed for connection to telegraphic or
                              telephonic apparatus, instruments or
                              networks.
8543.70.71.................  Electric luminescent lamps.
8543.70.97.................  Plasma cleaner machines that remove organic
                              contaminants from electron microscopy
                              specimens and holders.
8543.70.98.................  Other electrical machines and apparatus,
                              having individual functions, nesoi.
------------------------------------------------------------------------

[FR Doc. 2024-21217 Filed 9-17-24; 8:45 am]
BILLING CODE 3390-F4-P