Medical Devices; Physical Medicine Devices; Classification of the External Compression Device for Internal Jugular Vein Compression, 71159-71160 [2024-19722]

Agencies

• Food and Drug Administration
• DEPARTMENT OF HEALTH AND HUMAN SERVICES

[Federal Register Volume 89, Number 170 (Tuesday, September 3, 2024)]
[Rules and Regulations]
[Pages 71159-71160]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2024-19722]


-----------------------------------------------------------------------

DEPARTMENT OF HEALTH AND HUMAN SERVICES

Food and Drug Administration

21 CFR Part 890

[Docket No. FDA-2024-N-3946]


Medical Devices; Physical Medicine Devices; Classification of the 
External Compression Device for Internal Jugular Vein Compression

AGENCY: Food and Drug Administration, HHS.

ACTION: Final amendment; final order.

-----------------------------------------------------------------------

SUMMARY: The Food and Drug Administration (FDA or we) is classifying 
the external compression device for internal jugular vein compression 
into class II (special controls). The special controls that apply to 
the device type are identified in this order and will be part of the 
codified language for the external compression device for internal 
jugular vein compression's classification. We are taking this action 
because we have determined that classifying the device into class II 
(special controls) will provide a reasonable assurance of safety and 
effectiveness of the device. We believe this action will also enhance 
patients' access to beneficial innovative devices.

DATES: This order is effective September 3, 2024. The classification 
was applicable on February 26, 2021.

FOR FURTHER INFORMATION CONTACT: Kenneth Morabito, Center for Devices 
and Radiological Health, Food and Drug Administration, 10903 New 
Hampshire Ave., Bldg. 66, Rm. 4240, Silver Spring, MD 20993-0002, 301-
796-3807, [email protected].

SUPPLEMENTARY INFORMATION:

I. Background

    Upon request, FDA has classified the external compression device 
for internal jugular vein compression as class II (special controls), 
which we have determined will provide a reasonable assurance of safety 
and effectiveness.
    The automatic assignment of class III occurs by operation of law 
and without any action by FDA, regardless of the level of risk posed by 
the new device. Any device that was not in commercial distribution 
before May 28, 1976, is automatically classified as, and remains 
within, class III and requires premarket approval unless and until FDA 
takes an action to classify or reclassify the device (see 21 U.S.C. 
360c(f)(1)). We refer to these devices as ``postamendments devices'' 
because they were not in commercial distribution prior to the date of 
enactment of the Medical Device Amendments of 1976, which amended the 
Federal Food, Drug, and Cosmetic Act (FD&C Act).
    FDA may take a variety of actions in appropriate circumstances to 
classify or reclassify a device into class I or II. We may issue an 
order finding a new device to be substantially equivalent under section 
513(i) of the FD&C Act (see 21 U.S.C. 360c(i)) to a predicate device 
that does not require premarket approval. We determine whether a new 
device is substantially equivalent to a predicate device by means of 
the procedures for premarket notification under section 510(k) of the 
FD&C Act (21 U.S.C. 360(k)) and part 807 (21 CFR part 807).
    FDA may also classify a device through ``De Novo'' classification, 
a common name for the process authorized under section 513(f)(2) of the 
FD&C Act (see also part 860, subpart D (21 CFR part 860, subpart D)). 
Section 207 of the Food and Drug Administration Modernization Act of 
1997 (Pub. L. 105-115) established the first procedure for De Novo 
classification. Section 607 of the Food and Drug Administration Safety 
and Innovation Act (Pub. L. 112-144) modified the De Novo application 
process by adding a second procedure. A device sponsor may utilize 
either procedure for De Novo classification.
    Under the first procedure, the person submits a 510(k) for a device 
that has not previously been classified. After receiving an order from 
FDA classifying the device into class III under section 513(f)(1) of 
the FD&C Act, the person then requests a classification under section 
513(f)(2).
    Under the second procedure, rather than first submitting a 510(k) 
and then a request for classification, if the person determines that 
there is no legally marketed device upon which to base a determination 
of substantial equivalence, that person requests a classification under 
section 513(f)(2) of the FD&C Act.
    Under either procedure for De Novo classification, FDA is required 
to classify the device by written order within 120 days. The 
classification will be according to the criteria under section 
513(a)(1) of the FD&C Act. Although the device was automatically placed 
within class III, the De Novo classification is considered to be the 
initial classification of the device.
    When FDA classifies a device into class I or II via the De Novo 
process, the device can serve as a predicate for future devices of that 
type, including for 510(k)s (see section 513(f)(2)(B)(i) of the FD&C 
Act). As a result, other device sponsors do not have to submit a De 
Novo request or premarket approval application to market a 
substantially equivalent device (see section 513(i) of the FD&C Act, 
defining ``substantial equivalence''). Instead, sponsors can use the 
510(k) process, when necessary, to market their device.

II. De Novo Classification

    On March 19, 2020, FDA received Q30 Sports Science's request for De 
Novo classification of the Q-Collar. FDA reviewed the request in order 
to classify the device under the criteria for classification set forth 
in section 513(a)(1) of the FD&C Act.
    We classify devices into class II if general controls by themselves 
are insufficient to provide reasonable assurance of safety and 
effectiveness, but there is sufficient information to establish special 
controls that, in combination with the general controls, provide 
reasonable assurance of the safety and effectiveness of the device for 
its intended use (see 21 U.S.C. 360c(a)(1)(B)). After review of the 
information submitted in the request, we determined that the device can 
be classified into class II with the establishment of special controls. 
FDA has determined that these special controls, in addition to the 
general controls, will provide reasonable assurance of the safety and 
effectiveness of the device.
    Therefore, on February 26, 2021, FDA issued an order to the 
requester classifying the device into class II. In this final order, 
FDA is codifying the classification of the device by adding 21 CFR 
890.3050.\1\ We have named the generic type of device external 
compression device for internal jugular vein compression, and it is 
identified as a non-invasive device that is intended to increase 
intracranial blood volume to reduce the occurrence of specific changes 
in the brain following head

[[Page 71160]]

impacts sustained from the environment of use.
---------------------------------------------------------------------------

    \1\ FDA notes that the ``ACTION'' caption for this final order 
is styled as ``Final amendment; final order,'' rather than ``Final 
order.'' Beginning in December 2019, this editorial change was made 
to indicate that the document ``amends'' the Code of Federal 
Regulations. The change was made in accordance with the Office of 
Federal Register's (OFR) interpretations of the Federal Register Act 
(44 U.S.C. chapter 15), its implementing regulations (1 CFR 5.9 and 
parts 21 and 22), and the Document Drafting Handbook.
---------------------------------------------------------------------------

    FDA has identified the following risks to health associated 
specifically with this type of device and the measures required to 
mitigate these risks in table 1.

     Table 1--External Compression Device for Internal Jugular Vein
                Compression Risks and Mitigation Measures
------------------------------------------------------------------------
         Identified risks to health              Mitigation measures
------------------------------------------------------------------------
Syncope due to excessive compression.......  Non-clinical performance
                                              testing.
Use error, interference with other           Human factors testing, and
 equipment, or ineffective treatment          Labeling.
 leading to impact-related trauma or injury.
Adverse tissue reaction....................  Biocompatibility
                                              evaluation.
------------------------------------------------------------------------

    FDA has determined that special controls, in combination with the 
general controls, address these risks to health and provide reasonable 
assurance of safety and effectiveness. For a device to fall within this 
classification, and thus avoid automatic classification in class III, 
it would have to comply with the special controls named in this final 
order. The necessary special controls appear in the regulation codified 
by this order. This device is subject to premarket notification 
requirements under section 510(k) of the FD&C Act.

III. Analysis of Environmental Impact

    The Agency has determined under 21 CFR 25.34(b) that this action is 
of a type that does not individually or cumulatively have a significant 
effect on the human environment. Therefore, neither an environmental 
assessment nor an environmental impact statement is required.

IV. Paperwork Reduction Act of 1995

    This final order establishes special controls that refer to 
previously approved collections of information found in other FDA 
regulations and guidance. These collections of information are subject 
to review by the Office of Management and Budget (OMB) under the 
Paperwork Reduction Act of 1995 (44 U.S.C. 3501-3521). The collections 
of information in part 860, subpart D, regarding De Novo classification 
have been approved under OMB control number 0910-0844; the collections 
of information in 21 CFR part 814, subparts A through E, regarding 
premarket approval, have been approved under OMB control number 0910-
0231; the collections of information in part 807, subpart E, regarding 
premarket notification submissions, have been approved under OMB 
control number 0910-0120; the collections of information in 21 CFR part 
820, regarding quality system regulation, have been approved under OMB 
control number 0910-0073; and the collections of information in 21 CFR 
part 801, regarding labeling, have been approved under OMB control 
number 0910-0485.

List of Subjects in 21 CFR Part 890

    Medical devices.

    Therefore, under the Federal Food, Drug, and Cosmetic Act and under 
authority delegated to the Commissioner of Food and Drugs, 21 CFR part 
890 is amended as follows:

PART 890--PHYSICAL MEDICINE DEVICES

0
1. The authority citation for part 890 continues to read as follows:

    Authority:  21 U.S.C. 351, 360, 360c, 360e, 360j, 360l, 371.


0
2. Add Sec.  890.3050 to read as follows:


Sec.  890.3050   External compression device for internal jugular vein 
compression.

    (a) Identification. An external compression device for internal 
jugular vein compression is a non-invasive device that is intended to 
increase intracranial blood volume to reduce the occurrence of specific 
changes in the brain following head impacts sustained from the 
environment of use.
    (b) Classification. Class II (special controls). The special 
controls for this device are:
    (1) The patient-contacting components of the device must be 
demonstrated to be biocompatible.
    (2) Performance testing must demonstrate that the device performs 
as intended under anticipated conditions of use for the duration of the 
labeled use life.
    (3) Human factors and usability testing must demonstrate that users 
can correctly use the device, including the user's ability to correctly 
determine device size and confirm the proper fit of the device. Users 
must understand product limitations, warnings, and precautions, 
including the warning that the device does not prevent head injury and 
medical treatment should be sought following head injury.
    (4) Labeling must include the following:
    (i) A warning that the device does not replace, and should be worn 
with, other protective sports equipment associated with specific sports 
activities, such as helmets and shoulder pads;
    (ii) A warning that the device should not be worn if it interferes 
with other existing protective equipment;
    (iii) A warning that users should avoid head and neck impacts to 
the extent possible;
    (iv) A warning that serious harm can result from persistent, 
excessive pressure on the neck due to incorrect device size and fit; 
and
    (v) A warning that the device has not been demonstrated to prevent 
long-term cognitive function deficits, and the ultimate impact on 
clinical outcomes has not been evaluated.

    Dated: August 28, 2024.
Lauren K. Roth,
Associate Commissioner for Policy.
[FR Doc. 2024-19722 Filed 8-30-24; 8:45 am]
BILLING CODE 4164-01-P