Airworthiness Directives; Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes, 59851-59853 [2024-16041]

Download as PDF 59851 Proposed Rules Federal Register Vol. 89, No. 142 Wednesday, July 24, 2024 This section of the FEDERAL REGISTER contains notices to the public of the proposed issuance of rules and regulations. The purpose of these notices is to give interested persons an opportunity to participate in the rule making prior to the adoption of the final rules. DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2024–1893; Project Identifier MCAI–2023–01050–T] RIN 2120–AA64 Airworthiness Directives; Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). AGENCY: The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD–500–1A10 and BD–500–1A11 airplanes. This proposed AD was prompted by reported events of annunciated horizontal stabilizer trim actuator (HSTA) jams occurring at the end of the cruise phase of flight. This proposed AD would require lubricating the HSTA using an improved method, at a reduced interval, as specified in a Transport Canada AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products. SUMMARY: The FAA must receive comments on this proposed AD by September 9, 2024. DATES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions for submitting comments. • Fax: 202–493–2251. • Mail: U.S. Department of Transportation, Docket Operations, M– 30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE, Washington, DC 20590. ddrumheller on DSK120RN23PROD with PROPOSALS1 ADDRESSES: VerDate Sep<11>2014 16:57 Jul 23, 2024 Jkt 262001 • Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA–2024–1893; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The street address for Docket Operations is listed above. Material Incorporated by Reference: • For Transport Canada material identified in this proposed AD, contact Transport Canada, Transport Canada National Aircraft Certification, 159 Cleopatra Drive, Nepean, Ontario K1A 0N5, Canada; telephone 888–663–3639; email TC.AirworthinessDirectivesConsignesdenavigabilite.TC@tc.gc.ca. You may find this material on the Transport Canada website at tc.canada.ca/en/aviation. • You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. FOR FURTHER INFORMATION CONTACT: Mark Taylor, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516– 228–7300; email Mark.Taylor@faa.gov. SUPPLEMENTARY INFORMATION: Comments Invited The FAA invites you to send any written relevant data, views, or arguments about this proposal. Send your comments to an address listed under ADDRESSES. Include ‘‘Docket No. FAA–2024–1893; Project Identifier MCAI–2023–01050–T’’ at the beginning of your comments. The most helpful comments reference a specific portion of the proposal, explain the reason for any recommended change, and include supporting data. The FAA will consider all comments received by the closing date and may amend this proposal because of those comments. Except for Confidential Business Information (CBI) as described in the following paragraph, and other information as described in 14 CFR 11.35, the FAA will post all comments received, without change, to PO 00000 Frm 00001 Fmt 4702 Sfmt 4702 regulations.gov, including any personal information you provide. The agency will also post a report summarizing each substantive verbal contact received about this NPRM. Confidential Business Information CBI is commercial or financial information that is both customarily and actually treated as private by its owner. Under the Freedom of Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public disclosure. If your comments responsive to this NPRM contain commercial or financial information that is customarily treated as private, that you actually treat as private, and that is relevant or responsive to this NPRM, it is important that you clearly designate the submitted comments as CBI. Please mark each page of your submission containing CBI as ‘‘PROPIN.’’ The FAA will treat such marked submissions as confidential under the FOIA, and they will not be placed in the public docket of this NPRM. Submissions containing CBI should be sent to Mark Taylor, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516–228–7300; email Mark.Taylor@faa.gov. Any commentary that the FAA receives which is not specifically designated as CBI will be placed in the public docket for this rulemaking. Background Transport Canada, which is the aviation authority for Canada, has issued Transport Canada AD CF–2023– 68R1, dated April 30, 2024 (Transport Canada AD CF–2023–68R1) (also referred to as the MCAI), to correct an unsafe condition for certain Airbus Canada Limited Partnership Model BD– 500–1A10 and BD–500–1A11 airplanes. The MCAI states there have been reported events of annunciated horizontal stabilizer trim actuator (HSTA) jams occurring at the end of the cruise phase of flight. Investigation revealed water intrusion in the primary ball nut and/or secondary nut housing of the HSTA ballscrew assembly. Water intrusion and subsequent freezing has caused jamming of the HSTA, resulting in the loss of pitch trim capability. Loss of pitch trim capability could result in loss of control of the airplane. The FAA is proposing this AD to address the unsafe condition on these products. E:\FR\FM\24JYP1.SGM 24JYP1 59852 Federal Register / Vol. 89, No. 142 / Wednesday, July 24, 2024 / Proposed Rules You may examine the MCAI in the AD docket at regulations.gov under Docket No. FAA–2024–1893. is issuing this NPRM after determining that the unsafe condition described previously is likely to exist or develop in other products of the same type design. Material Incorporated by Reference Under 1 CFR Part 51 Transport Canada AD CF–2023–68R1 specifies improved procedures for lubricating the HSTA and repeating the lubrication at a reduced interval. This material is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in ADDRESSES. Proposed AD Requirements in This NPRM This proposed AD would require accomplishing the actions specified in Transport Canada AD CF–2023–68R1 described previously, except for any differences identified as exceptions in the regulatory text of this proposed AD. FAA’s Determination This product has been approved by the aviation authority of another country and is approved for operation in the United States. Pursuant to the FAA’s bilateral agreement with this State of Design Authority, it has notified the FAA of the unsafe condition described in the MCAI referenced above. The FAA Explanation of Required Compliance Information In the FAA’s ongoing efforts to improve the efficiency of the AD process, the FAA developed a process to use some civil aviation authority (CAA) ADs as the primary source of information for compliance with requirements for corresponding FAA ADs. The FAA has been coordinating this process with manufacturers and CAAs. As a result, the FAA proposes to incorporate Transport Canada AD CF– 2023–68R1 by reference in the FAA final rule. This proposed AD would, therefore, require compliance with Transport Canada AD CF–2023–68R1 in its entirety through that incorporation, except for any differences identified as exceptions in the regulatory text of this proposed AD. Service information required by Transport Canada AD CF– 2023–68R1 for compliance will be available at regulations.gov under Docket No. FAA–2024–1893 after the FAA final rule is published. Costs of Compliance The FAA estimates that this AD, if adopted as proposed, would affect 100 airplanes of U.S. registry. The FAA estimates the following costs to comply with this proposed AD: ESTIMATED COSTS FOR REQUIRED ACTIONS Labor cost Parts cost Cost per product Up to 2 work-hours × $85 per hour = $170 ............................................................. $0 Up to $170 ............. Authority for This Rulemaking ddrumheller on DSK120RN23PROD with PROPOSALS1 Title 49 of the United States Code specifies the FAA’s authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency’s authority. The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action. Regulatory Findings The FAA determined that this proposed AD would not have federalism implications under Executive Order 13132. This proposed AD would not have a substantial direct effect on the States, on the relationship between the national Government and the States, or on the distribution of power and VerDate Sep<11>2014 16:57 Jul 23, 2024 Jkt 262001 responsibilities among the various levels of government. For the reasons discussed above, I certify this proposed regulation: (1) Is not a ‘‘significant regulatory action’’ under Executive Order 12866, (2) Would not affect intrastate aviation in Alaska, and (3) Would not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. List of Subjects in 14 CFR Part 39 Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety. The Proposed Amendment Accordingly, under the authority delegated to me by the Administrator, the FAA proposes to amend 14 CFR part 39 as follows: PART 39—AIRWORTHINESS DIRECTIVES 1. The authority citation for part 39 continues to read as follows: ■ Authority: 49 U.S.C. 106(g), 40113, 44701. § 39.13 [Amended] 2. The FAA amends § 39.13 by adding the following new airworthiness directive: ■ PO 00000 Frm 00002 Fmt 4702 Sfmt 4702 Cost on U.S. operators Up to $17,000. Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.): Docket No. FAA– 2024–1893; Project Identifier MCAI– 2023–01050–T. (a) Comments Due Date The FAA must receive comments on this airworthiness directive (AD) by September 9, 2024. (b) Affected ADs None. (c) Applicability This AD applies to Airbus Canada Limited Partnership (Type Certificate previously held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Model BD–500– 1A10 and BD–500–1A11 airplanes, certificated in any category, as identified in Transport Canada AD CF–2023–68R1, dated April 30, 2024 (Transport Canada AD CF– 2023–68R1). (d) Subject Air Transport Association (ATA) of America Code 55, Stabilizers. (e) Unsafe Condition This AD was prompted by reported events of annunciated HSTA jams occurring at the end of the cruise phase of flight. Investigation revealed water intrusion in the primary ball nut and/or secondary nut housing of the HSTA ballscrew assembly. The FAA is issuing this AD to address water intrusion and subsequent freezing, which causes jamming of the HSTA, resulting in the loss E:\FR\FM\24JYP1.SGM 24JYP1 Federal Register / Vol. 89, No. 142 / Wednesday, July 24, 2024 / Proposed Rules of pitch trim capability. The unsafe condition, if not addressed, could result in loss of control of the airplane. (f) Compliance Comply with this AD within the compliance times specified, unless already done. (g) Requirements Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, Transport Canada AD CF– 2023–68R1. ddrumheller on DSK120RN23PROD with PROPOSALS1 (h) Exceptions to Transport Canada AD CF– 2023–68R1 (1) Where Transport Canada AD CF–2023– 68R1 refers to its effective date, this AD requires using the effective date of this AD. (2) Where Transport Canada AD CF–2023– 68R1 refers to hours air time, this AD requires using flight hours. (3) Where Paragraph A of Part I of Transport Canada AD CF–2023–68R1 specifies an initial compliance time for performing the lubrication of the HSTA, for this AD, the initial compliance time is at the earlier of the times specified in paragraphs (h)(3)(i) and (ii) of this AD. (i) Within 1,100 flight hours after the effective date of this AD. (ii) Within 12 months after the date of the most recent HSTA lubrication task, or within 5 days after the effective date of this AD, whichever occurs later. (4) Where Paragraph B of Part I of Transport Canada AD CF–2023–68R1 specifies an initial compliance time for performing the lubrication of the HSTA, for this AD, the initial compliance time is at the later of the times specified in paragraphs (h)(4)(i) and (ii) of this AD. (i) Within 1,100 flight hours or 12 months, whichever occurs first, since the date of issuance of the original airworthiness certificate or the original export certificate of airworthiness. (ii) Within 5 days after the effective date of this AD. (i) Additional AD Provisions The following provisions also apply to this AD: (1) Alternative Methods of Compliance (AMOCs): The Manager, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the manager of the International Validation Branch, mail it to the address identified in paragraph (j) of this AD. Information may be emailed to: 9-AVS-NYACO-COS@faa.gov. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office. (2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, International Validation VerDate Sep<11>2014 16:57 Jul 23, 2024 Jkt 262001 Branch, FAA; or Transport Canada; or Airbus Canada Limited Partnership’s Transport Canada Design Approval Organization (DAO). If approved by the DAO, the approval must include the DAO-authorized signature. (j) Additional Information For more information about this AD, contact Mark Taylor, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516– 228–7300; email Mark.Taylor@faa.gov. (k) Material Incorporated by Reference (1) The Director of the Federal Register approved the incorporation by reference (IBR) of the material listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51. (2) You must use this material as applicable to do the actions required by this AD, unless this AD specifies otherwise. (i) Transport Canada AD CF–2023–68R1, dated April 30, 2024. (ii) [Reserved] (3) For Transport Canada AD CF–2023– 68R1, contact Transport Canada, Transport Canada National Aircraft Certification, 159 Cleopatra Drive, Nepean, Ontario K1A 0N5, Canada; telephone 888–663–3639; email TC.AirworthinessDirectivesConsignesdenavigabilite.TC@tc.gc.ca. You may find this Transport Canada AD on the Transport Canada website at tc.canada.ca/ en/aviation. (4) You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. (5) You may view this material at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, visit www.archives.gov/federal-register/cfr/ ibr-locations, or email fr.inspection@ nara.gov. Issued on July 16, 2024. Peter A. White, Deputy Director, Integrated Certificate Management Division, Aircraft Certification Service. [FR Doc. 2024–16041 Filed 7–23–24; 8:45 am] BILLING CODE 4910–13–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2024–1894; Project Identifier MCAI–2024–00036–T] RIN 2120–AA64 Airworthiness Directives; Airbus SAS Airplanes Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). AGENCY: PO 00000 Frm 00003 Fmt 4702 Sfmt 4702 59853 The FAA proposes to supersede Airworthiness Directive (AD) 2023–21–02, which applies to certain Airbus SAS Model A330–200 series, A330–200 Freighter series, A330–300 series, A330–800 series, and A330–900 series airplanes. AD 2023–21–02 requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2023–21–02, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This proposed AD would continue to require certain actions in AD 2023–21–02 and would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products. DATES: The FAA must receive comments on this proposed AD by September 9, 2024. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions for submitting comments. • Fax: 202–493–2251. • Mail: U.S. Department of Transportation, Docket Operations, M– 30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE, Washington, DC 20590. • Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA–2024–1894; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The street address for Docket Operations is listed above. Material Incorporated by Reference: • For EASA material, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email ADs@easa.europa.eu; website easa.europa.eu. You may find this material on the EASA website at ad.easa.europa.eu. • You may view this material at the FAA, Airworthiness Products Section, SUMMARY: E:\FR\FM\24JYP1.SGM 24JYP1

Agencies

[Federal Register Volume 89, Number 142 (Wednesday, July 24, 2024)]
[Proposed Rules]
[Pages 59851-59853]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2024-16041]


========================================================================
Proposed Rules
                                                Federal Register
________________________________________________________________________

This section of the FEDERAL REGISTER contains notices to the public of 
the proposed issuance of rules and regulations. The purpose of these 
notices is to give interested persons an opportunity to participate in 
the rule making prior to the adoption of the final rules.

========================================================================


Federal Register / Vol. 89, No. 142 / Wednesday, July 24, 2024 / 
Proposed Rules

[[Page 59851]]



DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2024-1893; Project Identifier MCAI-2023-01050-T]
RIN 2120-AA64


Airworthiness Directives; Airbus Canada Limited Partnership (Type 
Certificate Previously Held by C Series Aircraft Limited Partnership 
(CSALP); Bombardier, Inc.) Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Notice of proposed rulemaking (NPRM).

-----------------------------------------------------------------------

SUMMARY: The FAA proposes to adopt a new airworthiness directive (AD) 
for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-
500-1A11 airplanes. This proposed AD was prompted by reported events of 
annunciated horizontal stabilizer trim actuator (HSTA) jams occurring 
at the end of the cruise phase of flight. This proposed AD would 
require lubricating the HSTA using an improved method, at a reduced 
interval, as specified in a Transport Canada AD, which is proposed for 
incorporation by reference (IBR). The FAA is proposing this AD to 
address the unsafe condition on these products.

DATES: The FAA must receive comments on this proposed AD by September 
9, 2024.

ADDRESSES: You may send comments, using the procedures found in 14 CFR 
11.43 and 11.45, by any of the following methods:
     Federal eRulemaking Portal: Go to regulations.gov. Follow 
the instructions for submitting comments.
     Fax: 202-493-2251.
     Mail: U.S. Department of Transportation, Docket 
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New 
Jersey Avenue SE, Washington, DC 20590.
     Hand Delivery: Deliver to Mail address above between 9 
a.m. and 5 p.m., Monday through Friday, except Federal holidays.
    AD Docket: You may examine the AD docket at regulations.gov under 
Docket No. FAA-2024-1893; or in person at Docket Operations between 9 
a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD 
docket contains this NPRM, the mandatory continuing airworthiness 
information (MCAI), any comments received, and other information. The 
street address for Docket Operations is listed above.
    Material Incorporated by Reference:
     For Transport Canada material identified in this proposed 
AD, contact Transport Canada, Transport Canada National Aircraft 
Certification, 159 Cleopatra Drive, Nepean, Ontario K1A 0N5, Canada; 
telephone 888-663-3639; email [email protected]. You may find this material on the 
Transport Canada website at tc.canada.ca/en/aviation.
     You may view this material at the FAA, Airworthiness 
Products Section, Operational Safety Branch, 2200 South 216th St., Des 
Moines, WA. For information on the availability of this material at the 
FAA, call 206-231-3195.

FOR FURTHER INFORMATION CONTACT: Mark Taylor, Aviation Safety Engineer, 
FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516-
228-7300; email [email protected].

SUPPLEMENTARY INFORMATION:

Comments Invited

    The FAA invites you to send any written relevant data, views, or 
arguments about this proposal. Send your comments to an address listed 
under ADDRESSES. Include ``Docket No. FAA-2024-1893; Project Identifier 
MCAI-2023-01050-T'' at the beginning of your comments. The most helpful 
comments reference a specific portion of the proposal, explain the 
reason for any recommended change, and include supporting data. The FAA 
will consider all comments received by the closing date and may amend 
this proposal because of those comments.
    Except for Confidential Business Information (CBI) as described in 
the following paragraph, and other information as described in 14 CFR 
11.35, the FAA will post all comments received, without change, to 
regulations.gov, including any personal information you provide. The 
agency will also post a report summarizing each substantive verbal 
contact received about this NPRM.

Confidential Business Information

    CBI is commercial or financial information that is both customarily 
and actually treated as private by its owner. Under the Freedom of 
Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public 
disclosure. If your comments responsive to this NPRM contain commercial 
or financial information that is customarily treated as private, that 
you actually treat as private, and that is relevant or responsive to 
this NPRM, it is important that you clearly designate the submitted 
comments as CBI. Please mark each page of your submission containing 
CBI as ``PROPIN.'' The FAA will treat such marked submissions as 
confidential under the FOIA, and they will not be placed in the public 
docket of this NPRM. Submissions containing CBI should be sent to Mark 
Taylor, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, 
Westbury, NY 11590; telephone 516-228-7300; email [email protected]. 
Any commentary that the FAA receives which is not specifically 
designated as CBI will be placed in the public docket for this 
rulemaking.

Background

    Transport Canada, which is the aviation authority for Canada, has 
issued Transport Canada AD CF-2023-68R1, dated April 30, 2024 
(Transport Canada AD CF-2023-68R1) (also referred to as the MCAI), to 
correct an unsafe condition for certain Airbus Canada Limited 
Partnership Model BD-500-1A10 and BD-500-1A11 airplanes. The MCAI 
states there have been reported events of annunciated horizontal 
stabilizer trim actuator (HSTA) jams occurring at the end of the cruise 
phase of flight. Investigation revealed water intrusion in the primary 
ball nut and/or secondary nut housing of the HSTA ballscrew assembly. 
Water intrusion and subsequent freezing has caused jamming of the HSTA, 
resulting in the loss of pitch trim capability. Loss of pitch trim 
capability could result in loss of control of the airplane.
    The FAA is proposing this AD to address the unsafe condition on 
these products.

[[Page 59852]]

    You may examine the MCAI in the AD docket at regulations.gov under 
Docket No. FAA-2024-1893.

Material Incorporated by Reference Under 1 CFR Part 51

    Transport Canada AD CF-2023-68R1 specifies improved procedures for 
lubricating the HSTA and repeating the lubrication at a reduced 
interval. This material is reasonably available because the interested 
parties have access to it through their normal course of business or by 
the means identified in ADDRESSES.

FAA's Determination

    This product has been approved by the aviation authority of another 
country and is approved for operation in the United States. Pursuant to 
the FAA's bilateral agreement with this State of Design Authority, it 
has notified the FAA of the unsafe condition described in the MCAI 
referenced above. The FAA is issuing this NPRM after determining that 
the unsafe condition described previously is likely to exist or develop 
in other products of the same type design.

Proposed AD Requirements in This NPRM

    This proposed AD would require accomplishing the actions specified 
in Transport Canada AD CF-2023-68R1 described previously, except for 
any differences identified as exceptions in the regulatory text of this 
proposed AD.

Explanation of Required Compliance Information

    In the FAA's ongoing efforts to improve the efficiency of the AD 
process, the FAA developed a process to use some civil aviation 
authority (CAA) ADs as the primary source of information for compliance 
with requirements for corresponding FAA ADs. The FAA has been 
coordinating this process with manufacturers and CAAs. As a result, the 
FAA proposes to incorporate Transport Canada AD CF-2023-68R1 by 
reference in the FAA final rule. This proposed AD would, therefore, 
require compliance with Transport Canada AD CF-2023-68R1 in its 
entirety through that incorporation, except for any differences 
identified as exceptions in the regulatory text of this proposed AD. 
Service information required by Transport Canada AD CF-2023-68R1 for 
compliance will be available at regulations.gov under Docket No. FAA-
2024-1893 after the FAA final rule is published.

Costs of Compliance

    The FAA estimates that this AD, if adopted as proposed, would 
affect 100 airplanes of U.S. registry. The FAA estimates the following 
costs to comply with this proposed AD:

                                      Estimated Costs for Required Actions
----------------------------------------------------------------------------------------------------------------
               Labor cost                  Parts  cost        Cost per product          Cost on U.S. operators
----------------------------------------------------------------------------------------------------------------
Up to 2 work-hours x $85 per hour = $170           $0   Up to $170.................  Up to $17,000.
----------------------------------------------------------------------------------------------------------------

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. Subtitle VII: Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    The FAA is issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701: General requirements. 
Under that section, Congress charges the FAA with promoting safe flight 
of civil aircraft in air commerce by prescribing regulations for 
practices, methods, and procedures the Administrator finds necessary 
for safety in air commerce. This regulation is within the scope of that 
authority because it addresses an unsafe condition that is likely to 
exist or develop on products identified in this rulemaking action.

Regulatory Findings

    The FAA determined that this proposed AD would not have federalism 
implications under Executive Order 13132. This proposed AD would not 
have a substantial direct effect on the States, on the relationship 
between the national Government and the States, or on the distribution 
of power and responsibilities among the various levels of government.
    For the reasons discussed above, I certify this proposed 
regulation:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Would not affect intrastate aviation in Alaska, and
    (3) Would not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

The Proposed Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA proposes to amend 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority:  49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive:

Airbus Canada Limited Partnership (Type Certificate Previously Held 
by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.): 
Docket No. FAA-2024-1893; Project Identifier MCAI-2023-01050-T.

(a) Comments Due Date

    The FAA must receive comments on this airworthiness directive 
(AD) by September 9, 2024.

(b) Affected ADs

    None.

(c) Applicability

    This AD applies to Airbus Canada Limited Partnership (Type 
Certificate previously held by C Series Aircraft Limited Partnership 
(CSALP); Bombardier, Inc.) Model BD-500-1A10 and BD-500-1A11 
airplanes, certificated in any category, as identified in Transport 
Canada AD CF-2023-68R1, dated April 30, 2024 (Transport Canada AD 
CF-2023-68R1).

(d) Subject

    Air Transport Association (ATA) of America Code 55, Stabilizers.

(e) Unsafe Condition

    This AD was prompted by reported events of annunciated HSTA jams 
occurring at the end of the cruise phase of flight. Investigation 
revealed water intrusion in the primary ball nut and/or secondary 
nut housing of the HSTA ballscrew assembly. The FAA is issuing this 
AD to address water intrusion and subsequent freezing, which causes 
jamming of the HSTA, resulting in the loss

[[Page 59853]]

of pitch trim capability. The unsafe condition, if not addressed, 
could result in loss of control of the airplane.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Requirements

    Except as specified in paragraph (h) of this AD: Comply with all 
required actions and compliance times specified in, and in 
accordance with, Transport Canada AD CF-2023-68R1.

(h) Exceptions to Transport Canada AD CF-2023-68R1

    (1) Where Transport Canada AD CF-2023-68R1 refers to its 
effective date, this AD requires using the effective date of this 
AD.
    (2) Where Transport Canada AD CF-2023-68R1 refers to hours air 
time, this AD requires using flight hours.
    (3) Where Paragraph A of Part I of Transport Canada AD CF-2023-
68R1 specifies an initial compliance time for performing the 
lubrication of the HSTA, for this AD, the initial compliance time is 
at the earlier of the times specified in paragraphs (h)(3)(i) and 
(ii) of this AD.
    (i) Within 1,100 flight hours after the effective date of this 
AD.
    (ii) Within 12 months after the date of the most recent HSTA 
lubrication task, or within 5 days after the effective date of this 
AD, whichever occurs later.
    (4) Where Paragraph B of Part I of Transport Canada AD CF-2023-
68R1 specifies an initial compliance time for performing the 
lubrication of the HSTA, for this AD, the initial compliance time is 
at the later of the times specified in paragraphs (h)(4)(i) and (ii) 
of this AD.
    (i) Within 1,100 flight hours or 12 months, whichever occurs 
first, since the date of issuance of the original airworthiness 
certificate or the original export certificate of airworthiness.
    (ii) Within 5 days after the effective date of this AD.

(i) Additional AD Provisions

    The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, 
International Validation Branch, FAA, has the authority to approve 
AMOCs for this AD, if requested using the procedures found in 14 CFR 
39.19. In accordance with 14 CFR 39.19, send your request to your 
principal inspector or responsible Flight Standards Office, as 
appropriate. If sending information directly to the manager of the 
International Validation Branch, mail it to the address identified 
in paragraph (j) of this AD. Information may be emailed to: [email protected]. Before using any approved AMOC, notify your 
appropriate principal inspector, or lacking a principal inspector, 
the manager of the responsible Flight Standards Office.
    (2) Contacting the Manufacturer: For any requirement in this AD 
to obtain instructions from a manufacturer, the instructions must be 
accomplished using a method approved by the Manager, International 
Validation Branch, FAA; or Transport Canada; or Airbus Canada 
Limited Partnership's Transport Canada Design Approval Organization 
(DAO). If approved by the DAO, the approval must include the DAO-
authorized signature.

(j) Additional Information

    For more information about this AD, contact Mark Taylor, 
Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, 
Westbury, NY 11590; telephone 516-228-7300; email 
[email protected].

(k) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the 
incorporation by reference (IBR) of the material listed in this 
paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
    (2) You must use this material as applicable to do the actions 
required by this AD, unless this AD specifies otherwise.
    (i) Transport Canada AD CF-2023-68R1, dated April 30, 2024.
    (ii) [Reserved]
    (3) For Transport Canada AD CF-2023-68R1, contact Transport 
Canada, Transport Canada National Aircraft Certification, 159 
Cleopatra Drive, Nepean, Ontario K1A 0N5, Canada; telephone 888-663-
3639; email [email protected]. You may find this Transport 
Canada AD on the Transport Canada website at tc.canada.ca/en/
aviation.
    (4) You may view this material at the FAA, Airworthiness 
Products Section, Operational Safety Branch, 2200 South 216th St., 
Des Moines, WA. For information on the availability of this material 
at the FAA, call 206-231-3195.
    (5) You may view this material at the National Archives and 
Records Administration (NARA). For information on the availability 
of this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locations, or email [email protected].

    Issued on July 16, 2024.
Peter A. White,
Deputy Director, Integrated Certificate Management Division, Aircraft 
Certification Service.
[FR Doc. 2024-16041 Filed 7-23-24; 8:45 am]
BILLING CODE 4910-13-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.