Accreditation and Approval of Camin Cargo Control, Inc. (Pasadena, TX) as a Commercial Gauger and Laboratory, 54846-54847 [2024-14559]

Download as PDF 54846 Federal Register / Vol. 89, No. 127 / Tuesday, July 2, 2024 / Notices English name of the country of origin of the article. The Congressional intent in enacting 19 U.S.C. 1304 was ‘‘that the ultimate purchaser should be able to know by an inspection of the marking on the imported goods the country of which the goods is the product. The evident purpose is to mark the goods so that at the time of purchase the ultimate purchaser may, by knowing where the goods were produced, be able to buy or refuse to buy them, if such marking should influence his will.’’ United States v. Friedlander & Co., 27 C.C.P.A. 297 at 302; C.A.D. 104 (1940) (emphases added). Part 134 of CBP’s Regulations (19 CFR part 134), implements the country of origin marking requirements and exceptions of 19 U.S.C. 1304. Section 134.1(b), CBP Regulations (19 CFR 134.1(b)), defines ‘‘country of origin’’ as: [T]he country of manufacture, production, or growth of any article of foreign origin entering the United States. Further work or material added to an article in another country must effect a substantial transformation in order to render such other country the ‘‘country of origin’’ within the meaning of this part. . . . As outlined above, courts have held that a substantial transformation occurs when an article emerges from a process with a new name, character or use different from that possessed by the article prior to processing. E.g., Energizer Battery, Inc. v. United States, 190 F. Supp. 3d 1308 (Court Int’l Trade 2016); United States v. Gibson-Thomsen Co., Inc., 27 CCPA 267, C.A.D. 98 (1940); National Hand Tool Corp. v. United States, 16 CIT 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993); Anheuser Busch Brewing Association v. United States, 207 U.S. 556 (1908) and Uniroyal Inc. v. United States, 542 F. Supp. 1026 (Court Int’l Trade 1982). Based on the information and analysis provided above, the imported PCBA components undergo a substantial transformation when manufactured into the subject PCBA in Taiwan. In contrast, the PCBA does not undergo a change in name, character, and use during the final assembly process occurring in China, which is comparatively simple in lotter on DSK11XQN23PROD with NOTICES1 CBPL No. 27–03 27–04 27–05 27–08 27–11 Holding Based on the facts and analysis set forth above, the DisplayPort male to female adapter, comprised of a Taiwanorigin PCBA, would be the product of a foreign country or instrumentality designated pursuant to 19 U.S.C. 2511(b). In addition, the country of origin for marking purposes of the adapter is Taiwan. Notice of this final determination will be given in the Federal Register, as required by 19 CFR 177.29. Any partyat-interest other than the party which requested this final determination may request, pursuant to 19 CFR 177.31, that CBP reexamine the matter anew and issue a new final determination. Pursuant to 19 CFR 177.30, any partyat-interest may, within 30 days of publication of the Federal Register Notice referenced above, seek judicial review of this final determination before the U.S. Court of International Trade. Sincerely, Alice A. Kipel, Executive Director Regulations and Rulings Office of Trade. [FR Doc. 2024–14549 Filed 7–1–24; 8:45 am] BILLING CODE 9111–14–P DEPARTMENT OF HOMELAND SECURITY U.S. Customs and Border Protection Accreditation and Approval of Camin Cargo Control, Inc. (Pasadena, TX) as a Commercial Gauger and Laboratory U.S. Customs and Border Protection, Department of Homeland Security. ACTION: Notice of accreditation and approval of Camin Cargo Control, Inc. (Pasadena, TX), as a commercial gauger and laboratory. AGENCY: Notice is hereby given, pursuant to CBP regulations, that Camin SUMMARY: ASTM ................. ................. ................. ................. ................. D4006 D95 D4928 D86 D445 27–13 ................. D4294 27–14 ................. D2622 27–48 ................. D4052 VerDate Sep<11>2014 nature. As a result, the country of origin for marking purposes of the subject DisplayPort male to female adapter is Taiwan, where the PCBA is manufactured. 17:34 Jul 01, 2024 Cargo Control, Inc. (Pasadena, TX), has been approved to gauge petroleum and certain petroleum products and accredited to test petroleum and certain petroleum products for customs purposes for the next three years as of July 26, 2023. Camin Cargo Control, Inc. (Pasadena, TX) was approved and accredited as a commercial gauger and laboratory as of July 26, 2023. The next triennial inspection date will be scheduled for July 2026. DATES: FOR FURTHER INFORMATION CONTACT: Robert P. Munivez, Laboratories and Scientific Services, U.S. Customs and Border Protection, 4150 Interwood South Parkway, Houston, TX 77032, tel. 281–560–2900. Notice is hereby given pursuant to 19 CFR 151.12 and 19 CFR 151.13, that Camin Cargo Control, Inc., 1001 Shaw Avenue, Pasadena, TX 77506, has been approved to gauge petroleum and certain petroleum products and accredited to test petroleum and certain petroleum products for customs purposes, in accordance with the provisions of 19 CFR 151.12 and 19 CFR 151.13. Camin Cargo Control, Inc. (Pasadena, TX) is approved for the following gauging procedures for petroleum and certain petroleum products from the American Petroleum Institute (API): SUPPLEMENTARY INFORMATION: API chapter 3 ................... 7 ................... 8 ................... 11 ................. 12 ................. 17 ................. Title Tank Gauging. Temperature Determination. Sampling. Physical Properties Data. Calculation of Petroleum Quantities. Marine Measurement. Camin Cargo Control, Inc. (Pasadena, TX), is accredited for the following laboratory analysis procedures and methods for petroleum and certain petroleum products set forth by the U.S. Customs and Border Protection Laboratory Methods (CBPL) and American Society for Testing and Materials (ASTM): Title Standard Test Method Standard Test Method Standard Test Method Standard Test Method Standard Test Method Viscosity). Standard Test Method Spectrometry. Standard Test Method etry. Standard Test Method Jkt 262001 PO 00000 for for for for for Water in Crude Oil by Distillation. Water in Petroleum Products and Bituminous Materials by Distillation. Water in Crude Oils by Coulometric Karl Fischer Titration. Distillation of Petroleum Products at Atmospheric Pressure. Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-ray Fluorescence for Sulfur in Petroleum Products by Wavelength Dispersive X-Ray Fluorescence Spectromfor Density, Relative Density, and API Gravity of Liquids by Digital Density Meter. Frm 00085 Fmt 4703 Sfmt 4703 E:\FR\FM\02JYN1.SGM 02JYN1 54847 Federal Register / Vol. 89, No. 127 / Tuesday, July 2, 2024 / Notices CBPL No. ASTM 27–50 ................. 27–57 ................. D93 D7039 27–58 ................. D5191 Title Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester. Standard Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-Ray Fluorescence Spectrometry. Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method). Anyone wishing to employ this entity to conduct laboratory analyses and gauger services should request and receive written assurances from the entity that it is accredited or approved by the U.S. Customs and Border Protection to conduct the specific test or gauger service requested. Alternatively, inquiries regarding the specific test or gauger service this entity is accredited or approved to perform may be directed to the U.S. Customs and Border Protection by calling (281) 560–2900. The inquiry may also be sent to CBPGaugersLabs@cbp.dhs.gov. Please reference the website listed below for a complete listing of CBP approved gaugers and accredited laboratories. https://www.cbp.gov/about/labsscientific/commercial-gaugers-andlaboratories. James D. Sweet, Laboratory Director, Houston, Laboratories and Scientific Services. [FR Doc. 2024–14559 Filed 7–1–24; 8:45 am] BILLING CODE 9111–14–P lotter on DSK11XQN23PROD with NOTICES1 CBPL No. D 287 27–02 .......................................... D 1298 27–03 27–04 27–05 27–06 27–07 27–08 27–13 D D D D D D D .......................................... .......................................... .......................................... .......................................... .......................................... .......................................... .......................................... Accreditation and Approval of Intertek USA, Inc. (Deer Park, TX) as a Commercial Gauger and Laboratory U.S. Customs and Border Protection, Department of Homeland Security. ACTION: Notice of accreditation and approval of Intertek USA, Inc. (Deer Park, TX) as a commercial gauger and laboratory. AGENCY: Notice is hereby given, pursuant to CBP regulations, that Intertek USA, Inc. (Deer Park, TX), has been approved to gauge petroleum and certain petroleum products and accredited to test petroleum and certain petroleum products for customs purposes for the next three years as of April 18, 2023. DATES: Intertek USA, Inc. (Deer Park, TX) was approved and accredited as a commercial gauger and laboratory as of April 18, 2023. The next inspection date will be scheduled for April 2026. FOR FURTHER INFORMATION CONTACT: Dr. Eugene Bondoc, Laboratories and Scientific Services Directorate, U.S. Customs and Border Protection, 1300 Pennsylvania Avenue NW, Suite 1501– SUMMARY: D 5002 27–48 .......................................... 27–54 .......................................... D 4052 D 1796 Anyone wishing to employ this entity to conduct laboratory analyses and gauger services should request and receive written assurances from the entity that it is accredited or approved Jkt 262001 A North, Washington, DC 20229, tel. 202–344–1060. SUPPLEMENTARY INFORMATION: Notice is hereby given pursuant to 19 CFR 151.12 and 19 CFR 151.13, that Intertek USA, Inc., 1114 Seaco Avenue, Deer Park, TX 77536, has been approved to gauge petroleum and certain petroleum products and accredited to test petroleum and certain petroleum products for customs purposes, in accordance with the provisions of 19 CFR 151.12 and 19 CFR 151.13 as of April 18, 2023. Intertek USA, Inc. (Deer Park, TX) is approved for the following gauging procedures for petroleum and certain petroleum products from the American Petroleum Institute (API): API chapters 3 ................... 7 ................... 8 ................... 12 ................. 17 ................. Title Tank Gauging. Temperature Determination. Sampling. Calculations. Maritime Measurement. Intertek USA, Inc. (Deer Park, TX) is accredited for the following laboratory analysis procedures and methods for petroleum and certain petroleum products set forth by the U.S. Customs and Border Protection Laboratory Methods (CBPL) and American Society for Testing and Materials (ASTM): Title Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method). Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method. Standard Test Method for Water in Crude Oil by Distillation. Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation. Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration. Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method. Standard Test Method for Sediment in Crude Oil by Membrane Filtration. Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure. Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive Xray Fluorescence Spectrometry. Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer. Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter. Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method. 4006 95 4928 473 4807 86 4294 27–46 .......................................... 17:34 Jul 01, 2024 U.S. Customs and Border Protection ASTM 27–01 .......................................... VerDate Sep<11>2014 DEPARTMENT OF HOMELAND SECURITY by the U.S. Customs and Border Protection to conduct the specific test or gauger service requested. Alternatively, inquiries regarding the specific test or gauger service this entity is accredited PO 00000 Frm 00086 Fmt 4703 Sfmt 4703 or approved to perform may be directed to the U.S. Customs and Border Protection by calling (202) 344–1060. The inquiry may also be sent to CBPGaugersLabs@cbp.dhs.gov. Please E:\FR\FM\02JYN1.SGM 02JYN1

Agencies

[Federal Register Volume 89, Number 127 (Tuesday, July 2, 2024)]
[Notices]
[Pages 54846-54847]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2024-14559]


-----------------------------------------------------------------------

DEPARTMENT OF HOMELAND SECURITY

U.S. Customs and Border Protection


Accreditation and Approval of Camin Cargo Control, Inc. 
(Pasadena, TX) as a Commercial Gauger and Laboratory

AGENCY: U.S. Customs and Border Protection, Department of Homeland 
Security.

ACTION: Notice of accreditation and approval of Camin Cargo Control, 
Inc. (Pasadena, TX), as a commercial gauger and laboratory.

-----------------------------------------------------------------------

SUMMARY: Notice is hereby given, pursuant to CBP regulations, that 
Camin Cargo Control, Inc. (Pasadena, TX), has been approved to gauge 
petroleum and certain petroleum products and accredited to test 
petroleum and certain petroleum products for customs purposes for the 
next three years as of July 26, 2023.

DATES: Camin Cargo Control, Inc. (Pasadena, TX) was approved and 
accredited as a commercial gauger and laboratory as of July 26, 2023. 
The next triennial inspection date will be scheduled for July 2026.

FOR FURTHER INFORMATION CONTACT: Robert P. Munivez, Laboratories and 
Scientific Services, U.S. Customs and Border Protection, 4150 Interwood 
South Parkway, Houston, TX 77032, tel. 281-560-2900.

SUPPLEMENTARY INFORMATION: Notice is hereby given pursuant to 19 CFR 
151.12 and 19 CFR 151.13, that Camin Cargo Control, Inc., 1001 Shaw 
Avenue, Pasadena, TX 77506, has been approved to gauge petroleum and 
certain petroleum products and accredited to test petroleum and certain 
petroleum products for customs purposes, in accordance with the 
provisions of 19 CFR 151.12 and 19 CFR 151.13.
    Camin Cargo Control, Inc. (Pasadena, TX) is approved for the 
following gauging procedures for petroleum and certain petroleum 
products from the American Petroleum Institute (API):

------------------------------------------------------------------------
             API chapter                             Title
------------------------------------------------------------------------
3...................................  Tank Gauging.
7...................................  Temperature Determination.
8...................................  Sampling.
11..................................  Physical Properties Data.
12..................................  Calculation of Petroleum
                                       Quantities.
17..................................  Marine Measurement.
------------------------------------------------------------------------

    Camin Cargo Control, Inc. (Pasadena, TX), is accredited for the 
following laboratory analysis procedures and methods for petroleum and 
certain petroleum products set forth by the U.S. Customs and Border 
Protection Laboratory Methods (CBPL) and American Society for Testing 
and Materials (ASTM):

------------------------------------------------------------------------
        CBPL No.              ASTM                    Title
------------------------------------------------------------------------
27-03..................  D4006          Standard Test Method for Water
                                         in Crude Oil by Distillation.
27-04..................  D95            Standard Test Method for Water
                                         in Petroleum Products and
                                         Bituminous Materials by
                                         Distillation.
27-05..................  D4928          Standard Test Method for Water
                                         in Crude Oils by Coulometric
                                         Karl Fischer Titration.
27-08..................  D86            Standard Test Method for
                                         Distillation of Petroleum
                                         Products at Atmospheric
                                         Pressure.
27-11..................  D445           Standard Test Method for
                                         Kinematic Viscosity of
                                         Transparent and Opaque Liquids
                                         (and Calculation of Dynamic
                                         Viscosity).
27-13..................  D4294          Standard Test Method for Sulfur
                                         in Petroleum and Petroleum
                                         Products by Energy-Dispersive X-
                                         ray Fluorescence Spectrometry.
27-14..................  D2622          Standard Test Method for Sulfur
                                         in Petroleum Products by
                                         Wavelength Dispersive X-Ray
                                         Fluorescence Spectrometry.
27-48..................  D4052          Standard Test Method for
                                         Density, Relative Density, and
                                         API Gravity of Liquids by
                                         Digital Density Meter.

[[Page 54847]]

 
27-50..................  D93            Standard Test Methods for Flash
                                         Point by Pensky-Martens Closed
                                         Cup Tester.
27-57..................  D7039          Standard Test Method for Sulfur
                                         in Gasoline and Diesel Fuel by
                                         Monochromatic Wavelength
                                         Dispersive X-Ray Fluorescence
                                         Spectrometry.
27-58..................  D5191          Standard Test Method for Vapor
                                         Pressure of Petroleum Products
                                         and Liquid Fuels (Mini Method).
------------------------------------------------------------------------

    Anyone wishing to employ this entity to conduct laboratory analyses 
and gauger services should request and receive written assurances from 
the entity that it is accredited or approved by the U.S. Customs and 
Border Protection to conduct the specific test or gauger service 
requested. Alternatively, inquiries regarding the specific test or 
gauger service this entity is accredited or approved to perform may be 
directed to the U.S. Customs and Border Protection by calling (281) 
560-2900. The inquiry may also be sent to [email protected]. 
Please reference the website listed below for a complete listing of CBP 
approved gaugers and accredited laboratories. https://www.cbp.gov/about/labs-scientific/commercial-gaugers-and-laboratories.

James D. Sweet,
Laboratory Director, Houston, Laboratories and Scientific Services.
[FR Doc. 2024-14559 Filed 7-1-24; 8:45 am]
BILLING CODE 9111-14-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.