Parcel Processing Categories Simplification, 53914-53932 [2024-13924]

Agencies

• Postal Service

[Federal Register Volume 89, Number 125 (Friday, June 28, 2024)]
[Proposed Rules]
[Pages 53914-53932]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2024-13924]


-----------------------------------------------------------------------

POSTAL SERVICE

39 CFR Part 111


Parcel Processing Categories Simplification

AGENCY: Postal ServiceTM.

ACTION: Proposed rule.

-----------------------------------------------------------------------

SUMMARY: The Postal Service is proposing to amend Mailing Standards of 
the United States Postal Service, Domestic Mail Manual (DMM[supreg]) in 
various sections to simplify the parcel processing categories.

DATES: Submit comments on or before July 29, 2024.

ADDRESSES: Mail or deliver written comments to the manager, Product 
Classification, U.S. Postal Service, 475 L'Enfant Plaza SW, Room 4446, 
Washington, DC 20260-5015. If sending comments by email, include the 
name and address of the commenter and send to 
[email protected], with a subject line of ``Parcel Processing 
Categories''. Faxed comments are not accepted.
    You may inspect and photocopy all written comments, by appointment 
only, at USPS[supreg] Headquarters Library, 475 L'Enfant Plaza SW, 11th 
Floor North, Washington, DC, 20260. These records are available for 
review on Monday through Friday, 9 a.m.-4 p.m., by calling 202-268-
2906.

FOR FURTHER INFORMATION CONTACT: Steven Jarboe at (202) 268-7690, or 
Garry Rodriguez at (202) 268-7281.

SUPPLEMENTARY INFORMATION: All submitted comments and attachments are 
part of the public record and subject to disclosure. Do not enclose any 
material in your comments that you consider to be confidential or 
inappropriate for public disclosure.
    Currently, the Postal Service has three parcel processing 
categories: machinable, irregular, and nonmachinable. The Postal 
Service is proposing to simplify the parcel processing categories by 
making revisions to the physical standards of the machinable processing 
category and consolidating the irregular and nonmachinable processing 
categories and renaming it ``Nonstandard Parcels''.
    The Postal Service is proposing to revise the ``machinable'' 
processing category by removing the minimum size dimensions requirement 
and, except for USPS Marketing Mail parcels, the minimum weight 
requirement. Except for cylindrical tubes and rolls or similar shaped 
pieces, and for labeling requirements in Publication 52, Hazardous, 
Restricted, and Perishable Mail, the minimum size of a machinable 
parcel will be determined by if it is large enough to hold the required 
delivery address, return address, mailing labels, postage, barcode, 
endorsements, and other mail markings on a single optical plane without 
bending, folding, or overlapping. All labels and markings must meet the 
applicable specifications (e.g., DMM, Publication 199, Parcel Labeling 
Guide). A parcel that does not meet this requirement will be considered 
nonmailable. Except for USPS Marketing Mail parcels, which will 
continue to have the 3.5 ounce minimum to be a machinable parcel, the 
minimum weight requirement for other parcels will no longer be a factor 
in determining machinability.
    The proposed ``Nonstandard Parcels'' processing category will 
continue to have a size and weight component that will consist of 
parcels that exceed the maximum dimensions of a machinable parcel, 
parcels that weigh less than the 3.5-ounce minimum weight for USPS 
Marketing Mail parcels only, and parcels that exceed the 25 pound 
maximum weight for a machinable parcel. The ``Nonstandard Parcels'' 
processing category will also have a ``Characteristics'' component that 
will define the criteria that will be used to determine if a parcel is 
nonstandard (e.g., cylindrical tubes and rolls, packaging). The 
``Characteristics'' component of ``Nonstandard Parcels'' will be 
supported by DMM sections 601.3.0, Packaging, and 601.4.0, Acceptable 
Mailing Containers. The packaging criteria in DMM section 601.7.0, 
Packaging Standards for Mail Processed at Network Distribution

[[Page 53915]]

Centers, will be consolidated into DMM section 601.3.0. The Postal 
Service is also proposing to revise the packaging standards under DMM 
section 601.3.0 to include that except for hazardous, restricted, and 
perishable items as provided in Publication 52, all other parcel priced 
pieces must be packaged in a box or other acceptable container that 
meets the applicable standards under DMM sections 601.3.0 and 601.4.0.
    The proposed revisions to parcel processing categories will not 
affect the Priority Mail Express[supreg], Priority Mail[supreg], USPS 
Ground Advantage[supreg], or USPS Connect[supreg] Local, products. The 
proposed revisions will result in no minimum size dimensions 
requirement, except for USPS Marketing Mail no minimum weight 
requirements, and a nomenclature change, for parcel preparation under 
the Parcel Select[supreg] Destination Entry, Library Mail, Media 
Mail[supreg], Bound Printed Matter, Periodicals, and USPS Marketing 
Mail parcels (regular and nonprofit) products.
    In addition, the Postal Service is also proposing to make minor 
revisions to the ``Additional Physical Standards'' subsections under 
DMM 101 and 201 to remove redundancy.
    The Postal Service intends to notify the Postal Regulatory 
Commission (PRC) of these revisions for updates to the Mail 
Classification Schedule in a future filing. The Postal Service also 
intends to revise all collateral material (e.g., Notice 123, Price 
List) in a future update.

Proposed Effective Date

    The Postal Service is proposing to have November 1, 2024, as the 
effective date. However, sack, tray, and pallet, label compliance would 
not be in effect until January 19, 2025.
    We believe these proposed revisions will simplify the parcel 
processing categories providing mailers with a more efficient process 
for shipping.
    Although exempt from the notice and comment requirements of the 
Administrative Procedure Act (5 U.S.C. 553(b), (c)) regarding proposed 
rulemaking by 39 U.S.C. 410(a), the Postal Service invites public 
comment on the proposed revisions to Mailing Standards of the United 
States Postal Service, Domestic Mail Manual (DMM), incorporated by 
reference in the Code of Federal Regulations.
    We will publish an appropriate amendment to 39 CFR part 111 to 
reflect these changes.

List of Subjects in 39 CFR Part 111

    Administrative practice and procedure, Postal Service.

    Accordingly, the Postal Service proposes the following changes to 
Mailing Standards of the United States Postal Service, Domestic Mail 
Manual (DMM), incorporated by reference in the Code of Federal 
Regulations (see 39 CFR 111.1):

PART 111--[AMENDED]

0
1. The authority citation for 39 CFR part 111 continues to read as 
follows:

    Authority:  5 U.S.C. 552(a); 13 U.S.C. 301-307; 18 U.S.C. 1692-
1737; 39 U.S.C. 101, 401, 403, 404, 414, 416, 3001-3011, 3201-3219, 
3403-3406, 3621, 3622, 3626, 3632, 3633, and 5001.

0
2. Revise the Mailing Standards of the United States Postal Service, 
Domestic Mail Manual (DMM) as follows:

Mailing Standards of the United States Postal Service, Domestic Mail 
Manual (DMM)

* * * * *

100 Retail Mail Letters, Cards, Flats, and Parcels

101 Physical Standards

* * * * *

3.0 Physical Standards for Parcels

3.1 Processing Categories

    [Revise the text of 3.1 to read as follows:]
    USPS categorizes parcels into one of two mail processing 
categories: machinable or nonstandard parcel. These categories are 
based on the physical dimensions of the parcel, and the placement of 
the delivery address and all required labels on the parcel (see 
601.1.1.5 for mailabilty). For additional information on the machinable 
and nonstandard processing categories see 201.7.0.
    [Revise the heading and text of 3.2 to read as follows:]

3.2 Size and Weight

3.2.1 Size

    Parcel sizes are as follows:
    a. Minimum size: Except for cylindrical tubes and rolls or similar 
shaped pieces and labeling exceptions in Publication 52, all parcels 
must be large enough to hold the required delivery address, return 
address, mailing labels, postage, barcode, endorsements, and other mail 
markings on a single optical plane without bending, folding, or 
overlapping (see 601.1.1.5). All labels and markings must meet the 
applicable specifications (e.g., DMM, Publication 199, Parcel Labeling 
Guide).
    b. Maximum size: Except for USPS Ground Advantage--Retail, which 
may not measure more than 130 inches in length and girth combined, no 
mailpiece may measure more than 108 inches in length and girth 
combined. For parcels, length is the distance of the longest dimension 
and girth is the distance around the thickest part.

3.2.2 Weight

    Except as provided under 4.0 through 7.0, no mailpiece may weigh 
more than 70 pounds.
* * * * *

4.0 Additional Physical Standards for Priority Mail Express

    [Revise the text of 4.0 to read as follows:]
    Lower size and weight standards than provided under 3.2 may apply 
to Priority Mail Express addressed to certain APO/FPO and DPO mail 
subject to 703.2.0, and 703.4.0, and for Department of State mail 
subject to 703.3.0.

5.0 Additional Physical Standards for Priority Mail

    [Revise the text of 5.0 to read as follows:]
    Lower size and weight standards than provided under 3.2 may apply 
to Priority Mail addressed to certain APO/FPO and DPO mail subject to 
703.2.0, and 703.4.0, and for Department of State mail subject to 
703.3.0.

6.0 Additional Physical Standards for First-Class Mail and USPS Ground 
Advantage--Retail

6.1 Maximum Weight

    [Delete the heading 6.1.1 and move revised text under 6.1 to read 
as follows:]
    First-Class Mail (letters and flats{time}  must not exceed 13 
ounces.
    [Delete 6.1.2, USPS Ground Advantage--Retail, in its entirety.]
* * * * *

6.4 Parcels

    [Revise the introductory text of 6.4 to read as follows:]
    A USPS Ground Advantage--Retail parcel is the following:
* * * * *
    [Delete item d in its entirety.]

7.0 Additional Physical Standards for Media Mail and Library Mail

    [Delete the introductory text and items a and b. Move the text of 
item c under 7.0 and revise as follows:]
    Lower size and weight standards than provided under 3.2 may apply 
to Library Mail and Media Mail addressed to certain APOs and FPOs, 
subject to

[[Page 53916]]

703.2.0 and 703.4.0 and for Department of State mail, subject to 
703.3.0.
* * * * *

120 Retail Mail Priority Mail

123 Prices and Eligibility

* * * * *

2.0 Basic Eligibility Standards for Priority Mail

2.1 Description of Service

    [Revise the last sentence of 2.1 to read as follows:]
    * * * Certain Priority Mail mailpieces, such as pieces containing 
hazardous material or considered nonstandard (e.g., oversized priced 
pieces and nonstandard fee-priced pieces), may receive deferred 
handling.
* * * * *

130 Retail Mail First-Class Mail and USPS Ground Advantage--Retail

133 Prices and Eligibility

* * * * *

2.0 Basic Eligibility Standards for First-Class Mail and USPS Ground 
Advantage--Retail

2.1 Description of Service

    [Revise the last sentence of 2.1 to read as follows:]
    * * * Certain USPS Ground Advantage--Retail mailpieces, such as 
pieces containing hazardous material or considered nonstandard (e.g., 
oversized priced pieces and nonstandard fee-priced pieces), may receive 
deferred handling.
* * * * *

200 Commercial Letters, Cards, Flats, and Parcels

201 Physical Standards

* * * * *

7.0 Physical Standards for Parcels

7.1 Processing Categories

    [Revise the text of 7.1 to read as follows:]
    USPS categorizes parcels into one of two mail processing 
categories: machinable or nonstandard. These categories are based on 
the physical dimensions of the piece, and the placement of the delivery 
address and other required labels on the piece (see 601.1.1.5 for 
mailability).

7.2 Minimum Size

    [Revise the text of 7.2 to read as follows:]
    Pieces are subject to the minimum standards in 7.5, and may be 
subject to other minimum dimensions, based on the standards for 
specific prices. Except for cylindrical tubes and rolls or similar 
shaped pieces and labeling exceptions in Publication 52, generally the 
minimum size of a parcel is any piece that is not a letter or a flat 
and must be large enough to hold the required delivery address, return 
address, mailing labels, postage, barcode, endorsements, and other mail 
markings on a single optical plane without bending, folding, or 
overlapping (see 601.1.1.5). All labels and markings must meet the 
applicable specifications (e.g., DMM, Publication 199, Parcel Labeling 
Guide).

7.3 Maximum Weight and Size

7.3.1 Maximum Weight

    [Revise the text of 7.3.1 to read as follows:]
    Except as provided under 8.0, no mailpiece may weigh more than 70 
pounds.
* * * * *

7.5 Machinable Parcels

7.5.1 Criteria

    [Delete the heading 7.5.1, Criteria, and move the text under 7.5. 
Revise the text of renumbered 7.5 to read as follows:]
    A machinable parcel is any piece that is not a letter or a flat and 
that meets the size and weight standards as follows:
    a. Minimum size: Except for cylindrical tubes and rolls or similar 
shaped pieces and labeling exceptions in Publication 52, a piece must 
be large enough to hold the required delivery address, return address, 
mailing labels, postage, barcode, endorsements, and other mail markings 
on a single optical plane without bending, folding, or overlapping (see 
601.1.1.5). All labels and markings must meet the applicable 
specifications.
    b. Maximum size: Not more than, 22 inches long, or 18 inches wide, 
or 15 inches high (see Exhibit 7.5.1b).
    c. Minimum weight: USPS Marketing Mail parcels must weigh 3.5 
ounces, all other parcel products no minimum weight.
    d. Maximum weight: Not more than 25 pounds.
    [Revise Exhibit 7.5.1b reference number to read as follows:]

Exhibit 7.5 Machinable Parcel Dimensions

    [Revise the graphic in renumbered Exhibit 7.5 by removing the image 
of the minimum size parcel.]
    [Delete 7.5.2, Criteria for Lightweight Machinable Parcels, 7.5.3, 
Soft Goods and Enveloped Printed Matter, and 7.5.4, Exception, in their 
entirety.]
* * * * *
    [Revise the heading and text of 7.6 to read as follows:]

7.6 Nonstandard Parcels

7.6.1 Dimensions and Weight

    A parcel is considered nonstandard by dimensions or weight as 
follows:
    a. Dimensions: A parcel that measures more than 22 inches in length 
or 18 inches in width or 15 inches in height.
    b. Weight: A USPS Marketing Mail parcel that weighs less than 3.5 
ounces or any parcel that weighs more than 25 pounds.

7.6.2 Characteristics

    A parcel is considered nonstandard by the following 
characteristics:
    a. Cylindrical tubes or rolls.
    b. A can, or wooden or metal box.
    c. A parcel containing more than 24 ounces of liquid in glass 
containers, or 1 gallon or more of liquid in metal or plastic 
containers (see 601.3.4).
    d. An insecurely wrapped or inadequately prepared parcel as 
provided under 601.3.0 and 601.4.0.
    [Delete 7.7, Nonmachinable Parcel, in its entirety.]
* * * * *

8.0 Additional Physical Standards by Class of Mail

    Revise the text of 8.1 and 8.2 to read as follows:]

8.1 Priority Mail Express

    Lower size and weight standards than provided under 7.3 may apply 
to Priority Mail Express addressed to certain APO/FPO and DPO mail 
subject to 703.2.0 and 703.4.0, and for Department of State mail 
subject to 703.3.0.

8.2 Priority Mail

    [Revise the text of 8.2 to read as follows:]

8.2.1 Weight and Size

    Lower weight and size standards than provided under 7.3 may apply 
to Priority Mail addressed to certain APO/FPO and DPO mail subject to 
703.2.0 and 703.4.0, and for Department of State mail subject to 
703.3.0.

8.2.2 Priority Mail Cubic

    Priority Mail Cubic must not weigh more than 20 pounds. See 223.1.3 
for additional information on size and characteristics.

8.3 USPS Ground Advantage--Commercial Parcels

    [Delete 8.3.1, Weight, in its entirety and renumber 8.3.2 as 
8.3.1.]

[[Page 53917]]

8.3.1 Size

    [Revise the text of renumbered 8.3.1 to read as follows:]
    A USPS Ground Advantage--Commercial parcel is:
* * * * *
    [Delete item d in its entirety.]
    [Add new 8.3.2 to read as follows:]

8.3.2 USPS Ground Advantage Commercial Cubic

    USPS Ground Advantage Commercial Cubic must not weigh more than 20 
pounds. See 285.1.3 for additional information on size and 
characteristics.

8.4 USPS Marketing Mail Parcels

* * * * *

8.4.2 Size

    [Revise the text of 8.4.2 to read as follows:]
    USPS Marketing Mail parcel dimensions are as follows:
    a. Regular Marketing parcels and Nonprofit Marketing parcels do not 
meet flat-size physical standards and must have the following 
characteristics:
    1. Length: Not more than 12 inches. Minimum length must be 5 inches 
if the parcel is \1/4\ inch thick or less.
    2. Height: Not more than 9 inches. Minimum height must be 3\1/2\ 
inches if the parcel is \1/4\ inch thick or less.
    3. Thickness: At least 0.009 inches and not more than 2 inches.
    4. An alternative addressing format, according to 602.3.0.
    b. Nonprofit Machinable Parcels and Nonprofit Nonstandard Parcels 
dimensions are as follows:
    1. Large enough to hold the required delivery address, return 
address, mailing labels, postage, barcode, endorsements, and other mail 
markings on the address side of the parcel.
    2. Not exceed 108 inches in length and girth.
    3. A Nonprofit Nonstandard Parcel is a parcel not meeting the 
criteria for machinable parcels as provided under 7.6.

8.5 Parcel Select

    [Delete 8.5.1 and 8.5.2 and renumber 8.5.3 as 8.5.1.]

8.5.1 USPS Connect Local

    [Revise the text of renumbered 8.5.1 to read as follows:]
    Pieces mailed at USPS Connect Local prices may not weigh more than 
25 pounds.
* * * * *

203 Basic Postage Statement, Documentation, and Preparation Standards

* * * * *

3.0 Standardized Documentation for First-Class Mail, Periodicals, USPS 
Marketing Mail, and Flat-Size Bound Printed Matter

* * * * *

3.3 Price Level Column Headings

    The actual name of the price level (or abbreviation) is used for 
column headings required by 3.2 and shown below:
* * * * *
    [Revise the introductory text of item b to read as follows:]
    b. Presorted First-Class Mail, barcoded and nonbarcoded Periodicals 
flats, nonbarcoded Periodicals letters, and machinable, nonmachinable, 
and nonstandard, USPS Marketing Mail:
    PRICE ABBREVIATION
* * * * *
    [Revise the ``ADC'' line item in the ``Price'' column under item b 
to read as follows:]
    ADC/RP&DC [USPS Marketing Mail nonmachinable letters, flats, and 
nonstandard parcels, and all Periodicals]
* * * * *
    [Revise the ``Mixed ADC'' line item in the ``Price'' column under 
item b to read as follows:]
    Mixed ADC [USPS Marketing Mail nonmachinable letters, flats, 
nonstandard parcels; and all Periodicals]
* * * * *
    c. Carrier Route Periodicals and Enhanced Carrier Route USPS 
Marketing Mail:
    PRICE ABBREVIATION
* * * * *
    [Revise the ``Saturation'' and ``High Density'' line items to read 
as follows:]
    Saturation [letters, flats, and nonstandard parcels]
    High Density [letters, flats, and nonstandard parcels]
* * * * *
    [Revise the ``Basic'' line item to read as follows:]
    Basic [letters, flats, and nonstandard parcels]
* * * * *

3.4 Sortation Level

    The actual sortation level (or corresponding abbreviation) is used 
for the bundle, tray, sack, or pallet levels required by 3.2 and shown 
below:
    PRICE ABBREVIATION
* * * * *
    [Revise the ``5-Digit Scheme Carrier Routes'' line item to read as 
follows:]
    5-Digit Scheme Carrier Routes [sacks/flat trays and pallets 
(Periodicals and USPS Marketing Mail flats); sacks and pallets 
(nonstandard parcels)]
* * * * *
    [Revise the ``5-Digit Scheme Carrier Routes'' line item to read as 
follows:]
    5-Digit Scheme [pallets, Periodicals flats and nonstandard parcels, 
USPS Marketing Mail flats, Bound Printed Matter flats]
* * * * *
    [Revise the ``Merged 5-Digit Scheme'' line item to read as 
follows:]
    Merged 5-Digit Scheme [flat trays and pallets (Periodicals and USPS 
Marketing Mail flats); sacks and pallets (nonstandard parcels)]
* * * * *
    [Revise the ``Merged 3-Digit'' line item to read as follows:]
    Merged 3-Digit [flat trays (Periodicals flats); sacks (nonstandard 
parcels)]
* * * * *
    [Revise the ``SCF'' line item to read as follows:]
    SCF [flat trays and pallets (Periodicals flats and USPS Marketing 
Mail); sacks and pallets (Bound Printed Matter and nonstandard 
parcels)]
* * * * *

4.0 Bundles

* * * * *

4.10 Additional Standards for Unsacked/Untrayed Bundles Entered at DDU 
or S&DC Facilities

    [Revise the introductory text of 4.10 to read as follows:]
    Mailers may enter unsacked, untrayed, or nonpalletized bundles of 
carrier route, Periodicals, or USPS Marketing Mail flats and unsacked 
Bound Printed Matter (BPM) flats or nonstandard parcels (BPM only) at 
destination delivery units (DDUs) or sorting and delivery centers 
(DS&DC) if all the following conditions are met:
* * * * *

5.0 Letter and Flat Trays

* * * * *

5.12 Line 2 (Content Line)

    Line 2 (content line) must meet these standards:
* * * * *
    b. Codes: The codes shown below must be used as appropriate on Line 
2 of tray, sack, and pallet labels.
    CONTENT TYPE CODE
* * * * *
    [Delete the ``Irregular Parcels'' line item.]
* * * * *
    [Revise the ``Mixed Machinable and Irregular Parcels'' line item to 
read as follows:]

[[Page 53918]]

    Mixed Machinable and Nonstandard Parcels MACH & NONSTD
    [Revise the ``Nonmachinable'' line item to read as follows:]
    Nonstandard NONSTD
* * * * *

7.0 Optional Endorsement Lines (OELs)

* * * * *

7.2.5 ZIP Code Information

* * * * *

Exhibit 7.2.5 OEL Labeling Lists

    PROCESSING CATEGORY AND PRESORT TYPE
* * * * *

Periodicals 1

* * * * *
    [Revise the ``Irregular parcels'' line item under ``Periodicals'' 
in the ``Processing Category and Presort Type'' column to read as 
follows:]
    Nonstandard parcels
* * * * *

Bound Printed Matter 1

* * * * *
    [Revise the ``Irregular parcels'' line item under ``Bound Printed 
Matter'' in the ``Processing Category and Presort Type'' column to read 
as follows:]
    Nonstandard parcels

Media Mail

* * * * *
    [Revise the ``Irregular parcels'' line item in the ``Processing 
Category and Presort Type'' column under ``Media Mail'' to read as 
follows:]
    Nonstandard parcels

Library Mail

* * * * *
    [Revise the ``Irregular parcels'' line item in the ``Processing 
Category and Presort Type'' column under ``Media Mail'' to read as 
follows:]
    Nonstandard parcels
* * * * *

204 Barcode Standards

* * * * *

3.2.4 3-Digit Content Identifier Numbers

* * * * *

Exhibit 3.2.4 [1-21-24] 3-Digit Content Identifier Numbers

CLASS AND MAILING..............             CIN  HUMAN-READABLE CONTENT
                                                  LINE
 

* * * * *

Priority Mail Open and Distribute

* * * * *

All Other Classes, Parcels

* * * * *
    [Revise the ``ASF/NDC/RPDC irregular parcels'' line item under 
``All other Classes, Parcels, to read as follows:]

ASF/NDC nonstandard parcels....             034  PMOD NONSTD NDC
 

* * * * *
    [Revise the heading of ``PER Irregular Parcels . . .'' to read as 
follows:]

PER Nonstandard Parcels--Merged Carrier Route and Presorted

    [Revise the text in the ``Human-Readable Content Line'' column to 
read as follows:]

merged 5-digit sacks...........             340  PER NONSTD CR/5D
merged 3-digit sacks...........             354  PER NONSTD CR/5D/3D
merged 5-digit scheme sacks....             365  PER NONSTD CR/5D SCH
 

    [Revise the heading of ``PER Irregular Parcels--Carrier Route'' to 
read as follows:]

PER Nonstandard Parcels--Carrier Route

    [Revise the text in the ``Human-Readable Content Line'' column to 
read as follows:]

saturation price sacks.........             397  PER NONSTD WSS \1\
high density price sacks.......             398  PER NONSTD WSH \1\
basic price sacks..............             395  PER NONSTD CR \1\
5-digit carrier routes sacks...             396  PER NONSTD 5D CR-RTS
5-digit scheme car. rts. sacks.             399  PER NONSTD CR-RTS SCH
3-digit carrier routes sacks...             355  PER NONSTD 3D CR-RTS
 

    [Revise the heading of ``PER Irregular Parcels--Presorted'' to read 
as follows:]

PER Nonstandard Parcels--Presorted

    [Revise the text in the ``Human-Readable Content Line'' column to 
read as follows:]

5-digit sacks..................             389  PER NONSTD 5D
3-digit sacks..................             390  PER NONSTD 3D
SCF sacks......................             394  PER NONSTD SCF
ADC sacks or trays.............             391  PER NONSTD ADC
mixed ADC sacks or trays.......             392  PER NONSTD WKG
origin mixed ADC sacks or trays             363  PER NONSTD WKG W FCM
 


[[Page 53919]]

* * * * *
    [Revise the heading of ``NEWS Irregular Parcels . . .'' to read as 
follows:]

NEWS Nonstandard Parcels--Merged Carrier Route and Presorted

    [Revise the text in the ``Human-Readable Content Line'' column to 
read as follows:]

merged 5-digit.................             440  NEWS NONSTD CR/5D
merged 5-digit scheme..........             465  NEWS NONSTD CR/5D SCH
merged 3-digit sacks...........             454  NEWS NONSTD CR/5D/3D
 

    [Revise the heading of ``NEWS Irregular Parcels--Carrier Route'' to 
read as follows:]

NEWS Nonstandard Parcels--Carrier Route

    [Revise the text in the ``Human-Readable Content Line'' column to 
read as follows:]

saturation price sacks.........             497  NEWS NONSTD WSS \1\
high density price sacks.......             498  NEWS NONSTD WSH \1\
basic price sacks..............             495  NEWS NONSTD CR \1\
5-digit carrier routes sacks...             496  NEWS NONSTD 5D CR-RTS
5-digit scheme car. rts. sacks.             499  NEWS NONSTD CR-RTS SCH
3-digit carrier routes sacks...             455  NEWS NONSTD 3D CR-RTS
 

    [Revise the heading of ``NEWS Irregular Parcels--Carrier Route'' to 
read as follows:]

NEWS Nonstandard Parcels--Presorted

    [Revise the text in the ``Human-Readable Content Line'' column to 
read as follows:]

5-digit sacks..................             489  NEWS NONSTD 5D
3-digit sacks..................             490  NEWS NONSTD 3D
SCF sacks......................             494  NEWS NONSTD SCF
ADC sacks or trays.............             491  NEWS NONSTD ADC
mixed ADC sacks or trays.......             492  NEWS NONSTD WKG
origin mixed ADC sacks or trays             463  NEWS NONSTD WKG W FCM
 

* * * * *
    [Revise the heading of ``MKT Marketing Parcels less than 6 oz. and 
Irregular Parcels'' to read as follows:]

MKT Marketing Parcels (Nonstandard) and Nonprofit Nonstandard Priced 
Parcels

    [Revise the text in the ``Human-Readable Content Line'' column to 
read as follows:]

5-digit scheme sacks...........             590  MKT NONSTD 5D SCH
5-digit sacks..................             590  MKT NONSTD 5D
SCF sacks......................             596  MKT NONSTD SCF
ASF sacks......................             571  MKT NONSTD ASF
NDC sacks......................             570  MKT NONSTD NDC
mixed NDC sacks
 

    [Revise the heading of ``MKT Marketing Parcels 6 oz. or more and 
``Machinable Parcels'' to read as follows:]

MKT Marketing Parcels (Machinable) and Nonprofit Machinable Priced 
Parcels

* * * * *
    [Revise the heading of ``MKT Machinable and Irregular Parcels--
Presorted'' to read as follows:]

MKT Machinable and Nonstandard Parcels--Presorted

* * * * *
    [Revise the heading of ``Carrier Route BPM--Irregular Parcels'' to 
read as follows:]

Carrier Route BPM--Nonstandard Parcels

    [Revise the text in the ``Human-Readable Content Line'' column to 
read as follows:]

carrier route sacks............             697  PSVC NONSTD CR \1\
5-digit carrier routes sacks...             698  PSVC NONSTD CR-RTS
5-digit scheme car. rt. sacks..             698  PSVC NONSTD CR-RTS SCH
 


[[Page 53920]]

    [Revise the heading of ``Presorted BPM--Irregular Parcels'' to read 
as follows:]

Presorted BPM--Nonstandard Parcels

    [Revise the text in the ``Human-Readable Content Line'' column to 
read as follows:]

5-digit sacks..................             690  PSVC NONSTD 5D
5-digit scheme sacks...........             690  PSVC NONSTD 5D SCH
3-digit sacks..................             691  PSVC NONSTD 3D
SCF sacks......................             696  PSVC NONSTD SCF
ADC sacks......................             692  PSVC NONSTD ADC
mixed ADC sacks................             694  PSVC NONSTD WKG
 

* * * * *
    [Revise the heading of ``Media Mail and Library Mail Irregular 
Parcels--Presorted'' to read as follows:]

Media Mail and Library Mail Nonstandard Parcels--Presorted

    [Revise the text in the ``Human-Readable Content Line'' column to 
read as follows:]

5-digit scheme sacks...........             690  PSVC NONSTD 5D SCH
5-digit sacks..................             690  PSVC NONSTD 5D
3-digit sacks..................             691  PSVC NONSTD 3D
ADC sacks......................             692  PSVC NONSTD ADC
mixed ADC sacks................             694  PSVC NONSTD WKG
 

* * * * *

Parcel Select

* * * * *
    [Revise the heading of ``Parcel Select Irregular (Nonmachinable) 
Parcels--Presorted'' to read as follows:]

Parcel Select--Nonstandard Parcels

    [Revise the text in the ``Human-Readable Content Line'' column to 
read as follows:]

3-digit sacks..................             691  PSVC NONSTD 3D
 

* * * * *
    [Delete the Combined Package Services, Parcel Select, and USPS 
Marketing--Irregular Parcels 2 up to 6 oz (APPS--machinable) line item 
in its entirety.]
    [Revise the of Combined PSVC & MKT--Irregular Parcels less than 2 
oz, and tubes and rolls (not APPS--machinable) to read as follows:]

Combined PSVC & MKT--Nonstandard Parcels Cylindrical Tubes and Rolls

    [Revise the text in the ``Human-Readable Content Line'' column to 
read as follows:]

3-digit sacks..................             591  MKT/PSVC NONSTD 3D
ADC sacks......................             592  MKT/PSVC NONSTD ADC
Mixed ADC sacks................             594  MKT/PSVC NONSTD WKG
 

* * * * *

207 Periodicals

* * * * *

22.0 Preparing Nonbarcoded (Presorted) Periodicals

* * * * *

22.6 Sack Preparation

    * * * For other mailing jobs, preparation sequence, sack size, and 
labeling:
    a. 5-digit, required at 72 pieces, optional at 24 pieces minimum.
* * * * *
    [Revise the text of item a2 to read as follows:]
    2. Line 2: use ``PER'' or NEWS'' as applicable; followed by 
``FLTS'' or ``NONSTD'' as applicable; followed by ``5D''.
    b. 3-digit, required at 72 pieces, optional at 24 pieces minimum.
* * * * *
    [Revise the text of item b2 to read as follows:]
    2. Line 2: use ``PER'' or ``NEWS'' as applicable; followed by 
``FLTS'' or ``NONSTD'' as applicable; followed by ``3D''; followed by 
``NON BC'' for flats.
    c. SCF, required at 72 pieces, optional at 24 pieces minimum.
* * * * *
    [Revise the text of item c2 to read as follows:]
    2. Line 2: ``PER'' or ``NEWS'' as applicable; followed by ``FLTS'' 
or ``NONSTD'' as applicable; followed by ``SCF''; followed by ``NON 
BC'' for flats.
    d. Origin/entry SCF, required for the SCF of the origin 
(verification) office, optional for the SCF of an entry office other 
than the origin office, (no minimum).
* * * * *
    [Revise the text of item d2 to read as follows:]
    2. Line 2: usen ``PER'' or ``NEWS'' as applicable; followed by 
``FLTS'' or ``NONSTD'' as applicable; followed by ``SCF''; followed by 
``NON BC'' for flats..
    e. ADC, required at 72 pieces, optional at 24 pieces minimum.
* * * * *
    [Revise the text of item e2 to read as follows:]
    2. Line 2: ``PER'' or ``NEWS'' as applicable; followed by 
``NONSTD'' as applicable; followed by ``ADC''.
    f. Origin mixed ADC, required; no minimum; for any remaining 
bundles for destinations in L201, Column B, corresponding to the origin 
ZIP Code in Column A.
* * * * *

[[Page 53921]]

    [Revise the text of item f2 to read as follows:]
    2. Line 2: ``PER'' or ``NEWS'' as applicable, followed by 
``NONSTD'' as applicable, followed by ``WKG W FCM.''
    g. Mixed ADC, required (no minimum).
* * * * *
    [Revise the text of item g2 to read as follows:]
    2. Line 2: ``PER'' or ``NEWS'' as applicable; followed by 
``NONSTD'' as applicable; followed by ``WKG'' for nonstandard parcels.
* * * * *

23.0 Preparing Carrier Route Periodicals

* * * * *
    [Revise the heading of 23.4 to read as follows:]

23.4 Preparation--Flat-Size Pieces and Nonstandard Parcels

23.4.1 Flat Tray and Sacking Preparation and Labeling

    * * * Preparation sequence, sack/tray size, and labeling:
    a. Carrier route, required at 72 pieces, optional at 24 pieces, 
fewer pieces not permitted.
* * * * *
    [Revise the text of item a2 to read as follows:]
    2. Line 2: ``PER'' or ``NEWS'' as applicable; followed by ``FLTS'' 
or ``NONSTD'' as applicable; followed by ``WSS'' for saturation price 
mail, or ``WSH'' for high density price mail, or ``CR'' for basic price 
mail; followed by the route type and number.
    b. 5-digit scheme carrier routes, required at 72 pieces, optional 
at 24 pieces, fewer pieces not permitted.
* * * * *
    [Revise the text of item b2 to read as follows:]
    2. Line 2: ``PER'' or ``NEWS'' as applicable; followed by ``FLTS'' 
or ``NONSTD'' as applicable; followed by ``CR-RTS SCH.''
    c. 5-digit carrier routes, required at 72 pieces, optional at 24 
pieces, fewer pieces not permitted.
* * * * *
    [Revise the text of item c2 to read as follows:]
    2. Line 2: ``PER'' or ``NEWS'' as applicable; followed by ``FLTS'' 
or ``NONSTD'' as applicable; followed by ``CR-RTS.''
    d. 3-digit carrier routes, required with one 6-piece bundle. Flat-
sized pieces must be prepared in flat trays (see 203.5.6).
* * * * *
    [Revise the text of item d2 to read as follows:]
    2. Line 2: ``PER'' or ``NEWS'' as applicable, followed by ``FLTS 
3D'' or ``NONSTD 3D'' as applicable, followed by ``CR-RTS.''
* * * * *

240 Commercial Mail USPS Marketing Mail

243 Prices and Eligibility

1.0 Prices and Fees

* * * * *

1.2 USPS Marketing Mail Prices

    USPS Marketing Mail prices are applied as follows:
* * * * *
    [Revise the text of item b to read as follows:]
    b. A price determined by adding the per piece charge and the 
corresponding per pound charge applies to any USPS Marketing Mail piece 
that weighs more than the following: Nonmachinable letters and flats 
that weigh more than 4.0 ounces, presorted Marketing Parcels, Nonprofit 
Machinable and Nonprofit Nonstandard parcels that weigh more than 3.3 
ounces and machinable parcels 3.5 ounces or more.
* * * * *

3.0 Basic Eligibility Standards for USPS Marketing Mail

* * * * *

3.2 Defining Characteristics

* * * * *
    [Revise the heading and text of 3.2.3 to read as follows:]

3.2.3 Nonprofit USPS Marketing Mail Machinable and Nonstandard Parcels

    Nonprofit USPS Marketing Mail parcels that do not qualify as 
Marketing parcels may be prepared and mailed as machinable or 
nonstandard parcels.
* * * * *

3.3 Additional Basic Standards for USPS Marketing Mail

    Each USPS Marketing Mail mailing is subject to these general 
standards:
    [Revise the text of item a to read as follows:]
    a. All pieces in a mailing must be of the same processing category, 
except that nonstandard and machinable parcels may be combined in 5-
digit scheme and 5-digit sacks or on 5-digit scheme and 5-digit 
pallets.
* * * * *
    [Revise the last sentence of item f to read as follows:]
    f. * * * Nonprofit USPS Marketing Mail machinable or nonstandard 
parcels must bear the addressee`s name and complete delivery address, 
or may use an alternative addressing format. DALS or DMLs may be used 
subject to 602.4.0.
* * * * *

4.0 Price Eligibility for USPS Marketing Mail

* * * * *

4.2 Minimum Per Piece Prices

    The minimum per piece prices (the minimum postage that must be paid 
for each piece) apply as follows:
* * * * *
    [Revise the fifth sentence of item c to read as follows:]
    c. Individual prices. * * * There are also separate prices for 
Marketing Parcels, Nonprofit Machinable priced parcels, and Nonprofit 
Nonstandard priced parcels. * * *
* * * * *

5.0 Additional Eligibility Standards for Nonautomation USPS Marketing 
Mail Letters, Flats, and Presorted USPS Marketing Mail Parcels

* * * * *

5.3 Price Application

    [Revise the second sentence of 5.3 to read as follows:]
    * * * Prices for Nonprofit parcels not qualifying as Marketing 
Parcels apply separately to Nonprofit Machinable parcels and Nonprofit 
Nonstandard parcels. * * *
* * * * *
    [Revise the heading of 5.8 to read as follows:]

5.8 Prices for Nonstandard Parcels and Marketing Parcels

5.8.1 5-Digit Price

    [Revise the introductory text of 5.8.1 to read as follows:]
    5-digit prices apply to nonstandard parcels and to Marketing 
parcels that are dropshipped to a DNDC/RPDC (or ASF/RPDC when claiming 
DNDC prices), DSCF/DRPDC, or DDU or DS&DC and presented:
* * * * *

5.8.2 SCF Price

    [Revise the introductory text of 5.8.2 to read as follows:]
    SCF prices apply to nonstandard parcels and to Marketing parcels 
that are dropshipped and presented to a DSCF/DRPDC or DNDC/DRPDC:
* * * * *

5.8.3 NDC Price

    [Revise the introductory text of 5.8.3 to read as follows:]
    NDC prices apply to nonstandard parcels and to Marketing parcels as

[[Page 53922]]

follows under either of the following conditions:
* * * * *

5.8.4 Mixed NDC Price

    [Revise the first sentence of 5.8.4 to read as follows:]
    Mixed NDC prices apply to nonstandard parcels and to Marketing 
parcels in origin NDC/RPDC or mixed NDC/RPDC containers that are not 
eligible for 5-digit, SCF, or NDC prices. * * *
* * * * *

245 Mail Preparation

1.0 General Information for Mail Preparation

* * * * *

1.2 Definition of Mailings

    Mailings are defined as:
* * * * *
    b. USPS Marketing Mail. Except as provided in 243.3.6, the types of 
USPS Marketing Mail listed below may not be part of the same mailing.
* * * * *
    [Revise the text of item b6 to read as follows:]
    6. Machinable and nonmachinable or nonstandard pieces.
* * * * *

1.4 Preparation Definitions and Instructions

    For purposes of preparing mail:
* * * * *
    [Revise the fifth sentence of item j to read as follows:]
    j. * * * The 5-digit scheme sort may not be used for other mail 
prepared on pallets, except for 5-digit bundles of USPS Marketing Mail 
nonstandard parcels that are part of a mailing job that is prepared in 
part as palletized flats at automation prices. * * *
* * * * *

11.0 Preparing Presorted Parcels

11.1 Basic Standards

    All mailings and all pieces in each mailing at USPS Marketing Mail 
and Nonprofit USPS Marketing Mail parcel prices are subject to 
preparation standards in 11.3 or 11.4, and to these general standards:
* * * * *
    [Revise the text of item b to read as follows:]
    b. Marketing Parcels, Nonprofit Machinable priced parcels, and 
Nonprofit Nonstandard priced parcels must each be prepared as separate 
mailings, except under 11.3.1.
* * * * *
    [Revise the heading of 11.3 to read as follows:]

11.3 Preparing Marketing Parcels (6 Ounces or More) and Nonprofit 
Machinable Parcels

11.3.1 Sacking

    [Revise the text of 11.3.1 to read as follows:]
    Prepare mailings of machinable Marketing Parcels weighing 6 ounces 
or more and mailings of Nonprofit Machinable priced parcels under 11.3. 
Prepare 5-digit sacks only for parcels dropshipped to a DNDC/RPDC (or 
ASF/RPDC when claiming DNDC prices), DSCF/DSCF, or DDU or DS&DC. 
Prepare ASF/RPDC or NDC/RPDC sacks only for parcels dropshipped to a 
DNDC/RPDC (or ASF/RPDC when claiming DNDC prices). There is no minimum 
for parcels in 5-digit/scheme sacks entered at a DDU or DS&DC. Mailers 
combining nonstandard parcels with machinable parcels placed in 5-
digit/scheme sacks must prepare those sacks under 11.3.2a. Mailers 
combining machinable Marketing Parcels weighing 6 ounces or more with 
Nonprofit Machinable priced parcels placed in ASF/RPDC, NDC/RPDC, or 
mixed NDC/RPDC sacks must prepare the sacks under 11.3.2.
* * * * *
    [Revise the heading of 11.4 to read as follows:]

11.4 Preparing Marketing Parcels (Less Than 6 Ounces) and Nonprofit 
Nonstandard Parcels

* * * * *

11.4.2 Sacking

    [Revise the text of 11.4.2 to read as follows:]
    Prepare mailings of nonstandard Marketing Parcels weighing less 
than 6 ounces and mailings of Nonprofit Nonstandard priced parcels 
under 11.4. Prepare 5-digit sacks only for parcels dropshipped to a 
DNDC/RP&DC (or ASF/RP&DC when claiming DNDC prices), DSCF/RP&DC, or DDU 
or S&DC. See 11.4.3 for restrictions on SCF/RP&DC, ASF/RP&DC, and NDC/
RP&DC sacks. Mailers must prepare a sack when the mail for a required 
presort destination reaches 10 pounds of pieces. There is no minimum 
for parcels prepared in 5-digit/scheme sacks entered at a DDU or S&DC. 
Mailers combining Nonprofit Nonstandard priced parcels with Nonprofit 
Machinable priced parcels and machinable Marketing Parcels weighing 6 
ounces or more in 5-digit/scheme sacks must prepare those sacks under 
11.3.2. Mailers may not prepare sacks containing nonstandard and 
machinable parcels to other presort levels. Mailers may combine 
Nonprofit Nonstandard priced parcels with nonstandard Marketing Parcels 
in sacks under 11.4.3.

11.4.3 Sacking and Labeling

    Preparation sequence, sack size, and labeling:
    a. * * * Sacks must contain a 10-pound minimum except at DDU or 
S&DC entry which has no minimum; labeling:
* * * * *
    [Revise the text of item a2 to read as follows:]
    2. Line 2: For 5-digit scheme sacks, ``STD NONSTD 5D SCH.'' For 5-
digit sacks, ``STD NONSTD 5D.''
    b. SCF/RP&DC, allowed only for mail deposited at a DSCF/RP&DC or a 
DNDC/RP&DC to claim SCF price; 10-pound minimum; labeling:
* * * * *
    [Revise the text of item b2 to read as follows:]
    2. For Line 2, ``STD NONSTD SCF.''
    c. ASF/RP&DC (optional), allowed only for mail deposited at an ASF/
RP&DC to claim DNDC price; 10-pound minimum; labeling:
* * * * *
    [Revise the text of item c2 to read as follows:]
    2. Line 2: ``STD NONSTD ASF.''
    d. NDC/RP&DC, allowed only for mail deposited at a DNDC/RP&DC to 
claim the NDC price; 10-pound minimum; labeling:
* * * * *
    [Revise the text of item d2 to read as follows:]
    2. Line 2: ``STD NONSTD NDC.''
    e. Origin NDC/RPDC (required); no minimum; labeling:
* * * * *
    [Revise the text of item e2 to read as follows:]
    2. Line 2: ``STD NONSTD NDC.''
    f. Mixed NDC/RP&DC (required); no minimum; labeling:
* * * * *
    [Revise the text of item f2 to read as follows:]
    2. Line 2: ``STD NONSTD WKG.''
* * * * *

250 Commercial Mail Parcel Select

* * * * *

255 Mail Preparation

* * * * *

4.0 Preparing Destination Entry Parcel Select

4.1 Preparing Destination Delivery Unit (DDU) or Sorting and Delivery 
Center (S&DC) Parcel Select

* * * * *

[[Page 53923]]

4.1.3 Sacking and Labeling

    [Revise the last sentence of 4.1.3 to read as follows:]
    * * * Machinable and nonstandard pieces may be combined in the same 
sack or on the same pallet (including pallet boxes on pallets).
* * * * *

4.2 Preparing Destination Hub (DHub) Parcel Select

* * * * *

4.2.3 Sacking and Labeling

    Sacking requirements for DHub entry include the following:
* * * * *
    [Revise the second sentence of item b to read as follows:]
    b. * * * Machinable and nonstandard pieces may be combined in the 
same sack to meet this requirement. * * *
* * * * *

4.3 Preparing Destination SCF (DSCF)/RP&DC (DRP&DC) Parcel Select

* * * * *

4.3.2 Basic Standards

    Pieces must meet the applicable standards in 4.0 and the following 
criteria:
* * * * *
    [Revise the first sentence of item d to read as follows:]
    d. Any remaining nonstandard parcels (as defined in 201.7.6) sorted 
to 3-digit ZIP Code prefixes in L002, Column C. * * *

4.3.3 Sacking and Labeling

    Sacking requirements for DSCF/DRP&DC entry:
* * * * *
    [Revise the second sentence of item b to read as follows:]
    b. * * * Machinable and nonstandard pieces may be combined in the 
same sack to meet this requirement. * * *
* * * * *
    [Revise the text of items g and h to read as follows:]
    g. 3-digit nonstandard sack labeling: Line 1, use L051; for Line 2, 
``PSVC NONSTD 3D.''
    h. See 705.8.0 for option to place 5-digit scheme and 5-digit DSCF/
DRP&DC sacks, SCF/RP&DC sacks, and 3-digit nonstandard sacks on an SCF/
RP&DC pallet.

4.4 Preparing Destination NDC (DNDC)/RP&DC (DRP&DC) Parcel Select

* * * * *

4.4.3 Sacking and Labeling

    DNDC/DRP&DC mailing (if not bedloaded), must be prepared as 
follows:
* * * * *
    [Revise the text of item b to read as follows:]
    b. DNDC/DRP&DC nonstandard parcels that each weigh 25 pounds or 
less must be sacked under 5.0 if the parcels do not contain perishables 
and the size of the parcels allows a sack to hold at least two pieces. 
DNDC/DRP&DC nonstandard parcels that cannot be sacked in this manner or 
that weigh more than 25 pounds must be transported as outside 
(unsacked) pieces. If authorized in advance by the USPS, DNDC/DRP&DC 
nonstandard parcels may be palletized.
* * * * *

256 Enter and Deposit

* * * * *

2.0 Deposit

* * * * *

2.2 Containers

    DNDC/DRP&DC mailings (if not bedloaded), DDU or S&DC mailings (if 
not bedloaded), and all DHub, and DSCF/DRP&DC mailings must be prepared 
as follows:
* * * * *
    [Revise the text of item b to read as follows:]
    b. For DNDC price, nonstandard parcels that each weigh 25 pounds or 
less must be sacked under 255.4.0 if the parcels do not contain 
perishables and the size of the parcels allows a sack to hold at least 
two pieces. DNDC/DRPDC nonstandard parcels that cannot be sacked in 
this manner or that weigh more than 25 pounds must be transported as 
outside (unsacked) pieces. If authorized in advance by the USPS, DNDC/
DRPDC nonstandard parcels may be palletized.
    [Revise the last sentence of item c to read as follows:]
    c. * * * Machinable and nonstandard pieces may be included in the 
same sack.
* * * * *
    [Revise the text of item e to read as follows:]
    e. For DSCF/DRP&DC and DDU or DS&DC, nonstandard parcels may be 
palletized (including pallet boxes on pallets). Nonstandard parcels may 
be combined with machinable parcels on 5-digit scheme, 5-digit, and 3-
digit pallets (including pallet boxes on pallets) claimed at DSCF or 
DDU prices under 705.8.0.
    [Revise the last sentence of item f to read as follows:]
    f. * * * Machinable and nonstandard pieces may be combined in 5-
digit scheme and 5-digit sacks or on 5-digit scheme and 5-digit pallets 
(including pallet boxes).
* * * * *

2.17 DNDC/DRP&DC Parcel Select--Acceptance at Designated SCF/RP&DC-USPS 
Benefit

    A mailing that is otherwise eligible for DNDC prices may be 
deposited, and accepted, at an SCF/RP&DC designated by the USPS when it 
benefits the USPS and:
    [Revise the text of item a to read as follows:]
    a. The mailing contains only machinable parcels prepared in 5-digit 
scheme and 5-digit sacks, pallets, or containers and nonstandard 
parcels prepared under 2.2.
* * * * *

260 Commercial Mail Bound Printed Matter

* * * * *

265 Mail Preparation

* * * * *

2.0 Bundles

* * * * *
    [Revise the heading and text of 2.4 to read as follows:]

2.4 Bundle Sizes for Nonstandard Parcels

    Mailers must prepare unsacked, nonpalletized bundles of nonstandard 
parcels for DDU or DS&DC entry according to 203.4.10, and as follows:
    a. For Presorted nonstandard parcels, under 8.2 for parcels 
weighing less than 10 pounds and 8.3 for parcels weighing 10 pounds or 
more.
    b. For carrier route nonstandard parcels, under 9.2 for parcels 
weighing less than 10 pounds and 9.3 for parcels weighing 10 pounds or 
more.
* * * * *

8.0 Preparing Presorted Parcels

8.1 Basic Standards

    All mailings of Presorted Bound Printed Matter (BPM) are subject to 
the standards in 5.2, and 5.3, and to these general standards:
* * * * *
    [Revise the second sentence of item b to read as follows:]
    b. * * * See 201.7.0 for definitions of machinable and nonstandard 
parcels.
* * * * *
    [Revise the heading of 8.2 to read as follows:]

[[Page 53924]]

8.2 Preparing Nonstandard Parcels Weighing Less than 10 Pounds

* * * * *

8.2.4 Sacking and Labeling

    Preparation sequence and labeling:
    a. 5-digit/scheme (required); labeling:
* * * * *
    [Revise the text of item a2 to read as follows:]
    2. Line 2: For 5-digit scheme sacks, ``PSVC NONSTD 5D SCH.'' For 5-
digit sacks, ``PSVC NONSTD 5D.''
    b. 3-digit (required); labeling:
* * * * *
    [Revise the text of item b2 to read as follows:]
    2. Line 2: ``PSVC NONSTD 3D.''
    c. SCF/RPDC (optional); labeling:
* * * * *
    [Revise the text of item c2 to read as follows:]
    2. Line 2: ``PSVC NONSTD SCF.''
    d. ADC/RPDC (required); labeling:
* * * * *
    [Revise the text of item d2 to read as follows:]
    2. Line 2: ``PSVC NONSTD ADC.''
    e. Mixed ADC/RPDC (required); labeling:
* * * * *
    [Revise the text of item d2 to read as follows:]
    2. Line 2: ``PSVC NONSTD WKG.''
* * * * *
    [Revise the heading of 8.3 to read as follows:]

8.3 Preparing Nonstandard Parcels Weighing 10 Pounds or More

* * * * *

8.3.3 Sacking and Labeling

    Preparation sequence and labeling:
    a. 5-digit/scheme (required); labeling:
* * * * *
    [Revise the text of item a2 to read as follows:]
    2. Line 2: For 5-digit scheme sacks, ``PSVC NONSTD 5D SCH.'' For 5-
digit sacks, ``PSVC NONSTD 5D.''
    b. 3-digit (required); labeling:
* * * * *
    [Revise the text of item b2 to read as follows:]
    2. Line 2: ``PSVC NONSTD 3D.''
    c. SCF/RPDC (optional); labeling:
    [Revise the text of item c2 to read as follows:]
    2. Line 2: ``PSVC NONSTD SCF.''
    d. ADC (required); labeling:
    [Revise the text of item d2 to read as follows:]
    2. Line 2: ``PSVC NONSTD ADC.''
    e. Mixed ADC/RPDC (required); labeling:
    [Revise the text of item e2 to read as follows:]
    2. Line 2: ``PSVC NONSTD WKG.''
* * * * *

9.0 Preparing Carrier Route Parcels

9.1 Basic Standards

9.1.1 General Standards for Carrier Route Preparation

    All mailings of Carrier Route Bound Printed Matter (BPM) are 
subject to the standards in 9.2 through 9.4 and to these general 
standards:
* * * * *
    [Revise the second and last sentence of item b to read as follows:]
    b. * * * A BPM nonstandard parcel is a piece that is not a 
machinable parcel as defined in 201.7.5.1. Nonstandard parcels also are 
pieces that meet the size and weight standards for a machinable parcel 
but are not individually boxed or packaged to withstand processing on 
parcel sorters under 601.3.0 and 601.4.0.
* * * * *
    [Revise the heading of 9.2 to read as follows:]

9.2 Preparing Nonstandard Parcels Weighing Less Than 10 Pounds

* * * * *

9.2.2 Required Sacking

    [Revise the first sentence in the introductory text of 9.2.2 to 
read as follows:]
    Mailers may prepare nonstandard parcels as unsacked bundles under 
203.4.10 or in bundles on pallets. * * *
* * * * *

9.2.4 Sack Label Line 2

    Line 2 information:
    [Revise the text of items a through c to read as follows:]
    a. Carrier route: ``PSVC NONSTD CR,'' followed by the route type 
and number.
    b. 5-digit scheme carrier routes: ``PSVC NONSTD CR-RTS SCH.''
    c. 5-digit carrier routes: ``PSVC NONSTD CR-RTS.''
    [Revise the heading of 9.3 to read as follows:]

9.3 Preparing Nonstandard Parcels Weighing 10 Pounds or More

    [Revise the first and second sentence in the introductory text of 
9.2.2 to read as follows:]
    Mailers may prepare nonstandard parcels as unsacked bundles under 
2.2 or in bundles on pallets. When preparing nonstandard parcels in 
sacks, place parcels only in direct carrier route sacks. * * * * * * 
Required preparation:
* * * * *
    [Revise the text of item b to read as follows:]
    b. Line 2: ``PSVC NONSTD CR,'' followed by the route type and 
number.
* * * * *

266 Enter and Deposit

* * * * *

3.0 Destination Entry

* * * * *

3.6 Mailings of Unsacked Bundles

    [Revise the first sentence of 3.6 to read as follows:]
    Mailers may present unsacked, nonpalletized bundles of BPM flats or 
nonstandard parcels that are properly prepared for and entered at DDU 
prices and unloaded according to standards in 3.8.9. * * *
* * * * *

4.0 Destination Network Distribution Center (DNDC)/Regional Processing 
and Distribution Center (DRP&DC) Entry

* * * * *
    [Revise the heading of 4.5 to read as follows:]

4.5 Presorted Nonstandard Parcels

    [Revise the first sentence of 4.5 to read as follows:]
    Presorted nonstandard parcels in sacks or on pallets at all sort 
levels may claim DNDC prices. * * *
* * * * *
    [Revise the heading of 4.7 to read as follows:]

4.7 Carrier Route Nonstandard Parcels

    [Revise the first sentence of 4.7 to read as follows:]
    Carrier Route nonstandard parcels in sacks at all sort levels or on 
pallets at all sort levels may claim DNDC prices. * * *
* * * * *

6.0 Destination Delivery Unit (DDU) or Sorting and Delivery Center 
(DS&DC) Entry

* * * * *
    [Revise the heading of 6,5 to read as follows:]

6.5 Presorted Nonstandard Parcels

    [Revise the first sentence of 6.5 to read as follows:]
    Presorted nonstandard parcels in 5-digit scheme sacks and 5-digit 
sacks, on 5-digit scheme or 5-digit pallets, or prepared as unsacked 5-
digit bundles may claim DDU prices. * * *
* * * * *
    [Revise the heading of 6.7 to read as follows:]

[[Page 53925]]

6.7 Carrier Route Nonstandard Parcels

    [Revise the first sentence of 6.7 to read as follows:]
    Carrier Route nonstandard parcels in sacks, on 5-digit scheme and 
5-digit pallets, or prepared as unsacked carrier route bundles may 
claim DDU prices. * * *
* * * * *

270 Commercial Mail Media Mail and Library Mail

273 Prices and Eligibility

* * * * *

7.0 Price Eligibility for Media Mail and Library Mail

* * * * *

7.3 Price Categories for Media Mail and Library Mail

* * * * *

7.3.2 Parcels

    The price categories for parcels are as follows:
    [Revise the last sentence of item a to read as follows:]
    a. * * * Nonstandard parcels may qualify for the 5-digit price if 
prepared to preserve sortation by 5-digit ZIP Code as prescribed by the 
postmaster of the mailing office.
    [Revise the last sentence of item b to read as follows:]
    b. * * * Nonstandard parcels may qualify for the basic price if 
prepared to preserve sortation by NDC/RP&DC as prescribed by the 
postmaster of the mailing office.
* * * * *

275 Mail Preparation

* * * * *

4.0 Basic Standards for Preparing Media Mail and Library Mail

    All mailings of Presorted Media Mail and Presorted Library Mail are 
subject to these general requirements:
* * * * *
    [Revise the last sentence of item d to read as follows:]
    d. * * * See 201.7.0 for definitions of machinable and nonstandard 
parcels.
* * * * *

6.0 Preparing Media Mail and Library Mail Parcels

6.1 Basic Standards

    All mailings of Presorted Media Mail and Presorted Library Mail 
parcels are subject to these general requirements:
* * * * *
    [Revise the text of item b to read as follows:]
    b. All parcels in a mailing must be within the same processing 
category. See 201.7.0 for definitions of machinable and nonstandard 
parcels.
* * * * *
    [Revise the heading of 6.3 to read as follows:]

6.3 Preparing Nonstandard Parcels

* * * * *

6.3.4 Sacking and Labeling

    Preparation sequence and labeling:
    a. 5-digit/scheme (optional, but required for 5-digit price); 
labeling:
* * * * *
    [Revise the text of item a2 to read as follows:]
    2. Line 2: For 5-digit scheme sacks, ``PSVC NONSTD 5D SCH.'' For 5-
digit sacks, ``PSVC NONSTD 5D.''
    b. 3-digit: required.
* * * * *
    [Revise the text of item b2 to read as follows:]
    2. Line 2: ``PSVC NONSTD 3D.''
    c. ADC/RPDC: required.
* * * * *
    [Revise the text of item c2 to read as follows:]
    2. Line 2: ``PSVC NONSTD ADC.''
    d. Mixed ADC/RPDC: required (no minimum).
* * * * *
    [Revise the text of item d2 to read as follows:]
    2. Line 2: ``PSVC NONSTD WKG.''
* * * * *

500 Additional Mailing Services

503 Extra Services

1.0 Basic Standards for All Extra Services

* * * * *

1.4.1 Eligibility--Domestic Mail

* * * * *

Exhibit 1.4.1 Eligibility--Domestic Mail

* * * * *
    [Revise footnote 7 to read as follows:]
    7. USPS Marketing Mail, Nonprofit Machinable and Nonprofit 
Nonstandard priced parcels only.
* * * * *

600 Basic Standards for All Mailing Services

601 Mailability

1.0 General Standards

1.1 Determining Mail Processing Categories

1.1.1 Processing Categories

    [Revise the first sentence of 1.1.1 to read as follows:]
    There are four mail processing categories for mailpieces: letter, 
flat, machinable parcel, and nonstandard parcel. * * *
* * * * *
    [Add new 1.1.5 to read as follows:]

1.1.5 Nonmailable Placement of Address on Parcel-Size Pieces

    The placement of the address on a parcel-size mailpiece may render 
a piece nonmailable. Except for cylindrical tubes or similar shaped 
pieces and labeling exceptions in Publication 52, if the address, 
return address, mailing labels, postage, barcode, endorsements, and 
other mail markings are not all placed on a single optical plane 
without bending, folding, or overlapping, it is nonmailable.
* * * * *

3.0 Packaging

    [Renumber 3.1 as 3.1.1 and revise the title of new 3.1.1 to read as 
follows:]

3.1.1 Basic Standards

* * * * *
    [Add new 3.1.2 to read as follows:]

3.1.2 Parcels

    In addition to 3.1.1, except for hazardous, restricted, and 
perishable items as provided in Publication 52, all other parcel priced 
pieces must be packaged in a box or other acceptable container that 
meet the applicable standards under 3.0 and 4.0.
* * * * *

3.7 High-Density Items

    [Revise the text of 3.7 to read as follows:]
    High-density items (such as tools, hardware, and machine and auto 
parts) weighing from 20 to 45 pounds must be packaged in fiberboard 
boxes constructed of a minimum 200-pound test board or equivalent wood, 
metal, or plastic containers. Plastic, metal, and similar hard 
containers must be packaged, treated, or otherwise prepared so that 
their coefficient of friction or ability to slide on a smooth, hard 
surface is similar to that of a domestic-class fiberboard box of the 
same approximate size and weight. Closure must be done by staples, 
heat-shrinking, adhesives, or tape. Boxes without inner packing or 
containing loose material must be reinforced or banded with reinforced 
paper or plastic tape, pressure-sensitive filament tape, or firmly 
applied nonmetallic banding. Internal blocking and bracing, including 
the use of interior containers, cut forms, partitions, dunnage, and 
liners, must be used as required so that packages can maintain their 
integrity without damage

[[Page 53926]]

to the contents if dropped once on one of their smallest sides on a 
solid surface from a height of 3 feet. These items from 45 to 70 pounds 
must be similarly packaged, closed, and reinforced, except that 
exterior containers must be a minimum of 275-pound test fiberboard or 
equivalent.
    [Revise the heading and text of 3.8 to read as follows:]

3.8 Books

    Books and similarly produced printed matter (such as catalogs) 
fastened together along one edge between hardback, paperback, or self-
covers, that are more than one inch thick or one pound must not be 
accepted in letter-style non-reinforced flat envelopes or without 
packaging. Envelopes or other appropriate packaging must meet the 
standards in 3.0. Void spaces within containers must be filled with 
dunnage, or otherwise stabilized to prevent shifting or damage to the 
contents or container. Shipments are packaged according to the 
following weight categories:
    a. Up to five pounds, sealing must be by multiple friction 
closures, completely clinched staples, heat-sealing, adhesives, tape, 
or nonmetallic banding. Although shrinkwrap is not acceptable as the 
only packaging for hardback books and similarly produced printed matter 
exceeding one pound or one inch thick, it may be used on the exterior 
of otherwise acceptable containers. Shrinkwrap (under 3.6) may be used 
as the only method of packaging for paperback books and similarly 
produced printed matter up to three pounds.
    b. From 5 to 10 pounds, closure must be by tape, nonmetallic 
banding, or adhesives. Reinforced tape or nonmetallic banding is 
adequate for both closure and reinforcement. Nonmetallic banding must 
be firmly applied to the point that the straps must be tightened until 
they depress the carton at the edges.
    c. From 10 to 25 pounds, reinforced tape or nonmetallic banding is 
adequate for closure and reinforcement. Nonmetallic banding must be 
firmly applied to the point that the straps tighten until they depress 
the carton at the edges.
    d. From 25 to 50 pounds, hardbound books and similarly produced 
printed matter must be packaged in 275-pound test fiberboard boxes and 
paperback books and similarly produced printed matter must be packaged 
in 200-pound test fiberboard boxes.
    e. From 50 to 70 pounds, hardbound books and similarly produced 
printed matter must be packaged in 350-pound test fiberboard boxes and 
paperback books and similarly produced printed matter must be packaged 
in 275-pound test fiberboard boxes.
    [Renumber 3.9 through 3.13 as 3.13 through 3.17 and add new 3.9 
through 3.12 to read as follows:]

3.9 Soft Goods

    Boxes containing soft goods (e.g., textiles, clothing, linens, or 
draperies) weighing up to 5 pounds must be filled to capacity. Soft 
goods between the weight range of 5 to 20 pounds must be packaged in 
material with a minimum 70-pound outer ply basis weight. Closure of 
bags must be by completely clinched staples, heat-sealing, adhesives, 
sewing, or tape. Improperly clinched staples must be removed. 
Shrinkwrapping is not acceptable as the only packaging. Fiberboard 
containers must be made of at least 200-pound test board for soft goods 
weighing from 20 to 45 pounds and at least 275-pound test board for 
soft goods weighing from 45 to 70 pounds.

3.10 Sound Recordings

    Shipments of recordings (e.g., records and CDs in paper sleeves, 
paperboard, or chipboard shells) weighing up to 10 pounds must be 
packed in 70-pound basis weight envelopes for weights up to 3 pounds, 
or outer corrugated, fiberboard containers for weights up to 10 pounds. 
When shipments weigh from 20 to 40 pounds, multiple shell containers 
must be packaged in 175-pound test fiberboard containers or equivalent 
and closed and reinforced by adhesives, kraft paper tape, equivalent 
plastic tape, or staples. When shipments weigh from 40 to 65 pounds, 
multiple shell containers up to 65 pounds must be packaged in 200-pound 
test fiberboard containers or equivalent and closed and reinforced as 
described for 20- to 40-pound containers, except that containers must 
be reinforced about every 8 inches around the package. Shipments 
weighing more than 65 pounds must be packaged in 275-pound test 
fiberboard containers or equivalent.

3.11 Film Cases

    A film case weighing more than 5 pounds or with strap-type 
closures, except any film case the USPS authorizes to be entered as a 
machinable parcel under 201.7.0 and to be identified by the words 
``Machinable in United States Postal Service Equipment'' permanently 
attached as a nontransferable decal in the lower right corner of the 
case.

3.12 Coefficient of Friction

    All parcels must have the coefficient of friction or ability to 
slide on a smooth, hard surface, similar to that of a domestic-class 
fiberboard box of the same approximate size and weight.
* * * * *

4.0 Acceptable Mailing Containers

* * * * *

4.2 Boxes

    Boxes are acceptable, subject to these standards:
    [Revise the text of items a through c to read as follows:]
    a. Paperboard boxes may be used for loads to 10 pounds.
    b. Metal-stayed paperboard boxes may be used for loads to 20 
pounds.
    c. Solid and corrugated fiberboard boxes may be used for loads to 
70 pounds or according to the limits in 3.0.
    [Delete the table under item c in its entirety.]
* * * * *
    [Delete item g in its entirety.]
* * * * *
    [Revise the text of 4.4 and 4.5 to read as follows:]

4.4 Paper Bags and Wraps

    For loads of up to 5 pounds, paper bags and wraps are acceptable 
when at least of a 50-pound basis weight (the strength of an average 
large grocery bag) and the items are immune from impact or pressure 
damage. A combination of plies adding up to or exceeding 50-pound basis 
weight is not acceptable. For loads of up to 20 pounds, reinforced bags 
or bags with a minimum of 70-pound basis weight are acceptable. 
Nonreinforced loose-fill padded bags are not acceptable as exterior 
containers, unless the exterior ply is at least 60-pound basis weight.

4.5 Plastic Bags

    Plastic bags must be at least 2 mil thick polyethylene or 
equivalent for loads up to 5 pounds; 4 mil thick for loads up to 10 
pounds.

4.6 Plastic Film

    Heat-shrinkable plastic film--either irradiated polyethylene, 
linear low-density polyolefin, or copolymer--may be used as packaging 
for mailpieces under the following conditions only:
    [Delete item a and renumber items b and c as items a and b. Revise 
the text of renumbered items a and b to read as follows:]
    a. Film must be at least 1\1/4\ (1.25) mil thick for a load up to 5 
pounds.
    b. Film must be at least 1\1/2\ (1.5) mil thick for a load up to 10 
pounds, only

[[Page 53927]]

when mailers prepare the parcels on 5-digit/scheme, merged 5-digit/
scheme, or finer level pallets.
* * * * *
    [Revise the heading of 7.0 and delete the text in its entirety to 
read as follows:]

7.0 Reserved

* * * * *

602 Addressing

* * * * *

3.0 Use of Alternative Addressing

* * * * *

3.2 Simplified Address

3.2.1 Conditions for General Use

    The following conditions must be met when using a simplified 
address on commercial mailpieces:
* * * * *
    [Revise the introductory text of item b to read as follows:]
    b. USPS Marketing Mail, Periodicals, and Bound Printed Matter flat-
size mailpieces (including USPS Marketing Mail pieces allowed as flats 
under 3.2.1c), USPS Marketing Mail Product Samples mailed at saturation 
(Every Door) prices, and Periodicals nonstandard parcels for 
distribution to a city route or to Post Office boxes in offices with 
city carrier service may bear a simplified address, but only when 
complete distribution is made under the following conditions:
* * * * *

3.2.3 Mail Preparation

    [Revise the third sentence in the introductory text of 3.2.3 to 
read as follows:]
    * * * Mailers must prepare nonstandard parcels in carrier route 
bundles in sacks or directly on pallets. * * *
* * * * *

604 Postage Payment Methods and Refunds

* * * * *

5.0 Permit Imprint (Indicia)

* * * * *

5.3 Indicia Design, Placement, and Content

* * * * *

5.3.9 Use of a Company Permit Imprint

    * * * The following standards apply:
    [Revise the last sentence of item a to read as follows:]
    a. * * * Sample pieces are not required for nonidentical-piece USPS 
Marketing Mail and Package Services machinable or nonstandard parcel 
mailings (e.g., merchandise and other fulfillment mailings).
* * * * *

700 Special Standards

* * * * *

705 Advanced Preparation and Special Postage Payment Systems

* * * * *

6.0 Combining Mailings of USPS Marketing Mail, Package Services, and 
Parcel Select Parcels

* * * * *

6.4 Combining Package Services, Parcel Select, and USPS Marketing 
Mail--Optional 3-Digit SCF Entry

* * * * *

6.4.2 Qualification and Preparation

    Parcel Select and Bound Printed Matter machinable parcels, and USPS 
Marketing Mail parcels may be prepared for entry at designated SCFs 
under these standards:
* * * * *
    [Revise the text of item d to read as follows:]
    d. USPS Marketing Mail, machinable Marketing Parcels (regular and 
nonprofit) and Nonprofit Machinable priced parcels are eligible for the 
NDC/RPDC presort-level DNDC price. USPS Marketing Mail, nonstandard 
Marketing Parcels (regular and nonprofit) and Nonprofit Nonstandard 
priced parcels are eligible for the 3-digit presort-level DSCF price.
* * * * *

7.0 Combining Package Services and Parcel Select Parcels for 
Destination Entry

7.1 Combining Parcels--DSCF/RP&DC and DDU or S&DC Entry

* * * * *

7.1.2 Basic Standards

    [Revise the introductory text of 7.1.2 to read as follows:]
    Package Services and Parcel Select parcels that qualify as 
machinable and nonstandard under 201 and meet the following conditions 
may be combined in 5-digit scheme and 5-digit sacks or 5-digit scheme 
and 5-digit pallets under these conditions:
* * * * *

8.0 Preparing Pallets

* * * * *

8.5 General Preparation

8.5.1 Presort

    [Revise the seventh sentence of 8.5.1 to read as follows:]
    * * * These standards may result in some bundles of Periodicals 
flats and nonstandard parcels and USPS Marketing Mail flats that are 
part of a mailing job prepared in part as palletized flats at 
automation prices not being placed on the finest level of pallet 
possible. * * *
* * * * *

8.5.2 Required Preparation

    The following standards apply to Periodicals, USPS Marketing Mail, 
Parcel Select, and Package Services, except Parcel Select mailed at 
DSCF and DDU prices:
* * * * *
    [Revise the first sentence of item b to read as follows:]
    b. For bundles of flat-size mailpieces or bundles of nonstandard 
parcels on pallets, after preparing all possible pallets under 8.5.2a, 
when 250 or more pounds of bundles remain for an ADC/RPDC (Periodicals) 
or for a NDC/ASF/RPDC (USPS Marketing Mail, Parcel Select, and Package 
Services), mailers must prepare the ADC/RPDC or NDC/ASF/RPDC pallet, as 
applicable for the class of mail. * * *
* * * * *

8.5.4 Minimum Height of Mail

    The definitions of the minimum height of mail used to qualify for 
DSCF/DRPDC Parcel Select prices are as follows:
* * * * *
    [Revise the first sentence of item b to read as follows:]
    b. Nonstandard parcels. * * *
* * * * *

8.5.6 Mail on Pallets

    These standards apply to mail on pallets:
* * * * *
    [Revise the text of items a and b to read as follows:]
    a. For Bound Printed Matter nonstandard parcels, Presorted and 
Carrier Route price mail may be combined on all levels of pallet. For 
Bound Printed Matter flats, Presorted and Carrier Route price mail may 
be combined on all levels of pallet except as provided in 8.5.6g.
    b. For sacks or flat trays of Periodicals, USPS Marketing Mail, and 
Bound Printed Matter flats or nonstandard parcels, carrier route price 
mail must be prepared on separate 5-

[[Page 53928]]

digit pallets from automation price and/or presorted price mail.
* * * * *

8.6.5 Line 2 (Content Line)

    Line 2 (content line) must meet these standards:
* * * * *
    b. Codes. The codes shown below must be used as appropriate on Line 
2 of sack, tray, and pallet labels.
    CONTENT TYPE CODE
* * * * *
    [Delete the ``Irregular Parcels'' line item in its entirety.]
* * * * *
    [Revise the ``Content Type'' text of the ``Mixed Machinable and 
Irregular'' line item to read as follows:]
    Mixed Machinable and Nonstandard Parcels MACH & NONSTD (USPS 
Marketing Mail only)
* * * * *
    [Revise the ``Content Type'' text of the ``Nonmachinable Parcels'' 
line item to read as follows:]
    Nonstandard Parcels NONSTD
* * * * *

8.8 Basic Uses

    These types of mail may be palletized:
* * * * *
    [Revise the text of item d to read as follows:]
    d. Machinable or nonstandard parcels.
* * * * *

8.9 Bundles on Pallets

8.9.1 Applicability

    [Revise the first sentence of 8.9.1 to read as follows:]
    Presort destination bundles of Periodicals, USPS Marketing Mail, 
and Package Services flats and nonstandard parcels may be placed 
directly on pallets under 8.9.2 through 8.9.5 and 8.10. * * *
* * * * *

8.9.5 Bound Printed Matter

    Bound Printed Matter on pallets must be bundled as follows:
* * * * *
    b. Presorted and Carrier Route Bound Printed Matter:
    [Revise the first sentence of item b1 to read as follows:]
    1. Only individual pieces of flats or nonstandard parcels that 
weigh less than 10 pounds each may be prepared as bundles on pallets. * 
* *
* * * * *

8.10.2 Periodicals--Bundles, Sacks, Letter or Flat Trays

    [Revise the seventh sentence in the introductory text of 8.10.2 to 
read as follows:]
    * * * Bundles of Periodicals flats and nonstandard parcels may also 
be palletized under 10.0, 12.0, or 13.0. * * *
* * * * *
    [Revise the third sentence in the introductory text of item b to 
read as follows:]
    b. * * * Required for bundles containing all other flats or 
nonstandard parcels. * * *
* * * * *
    [Revise the third sentence in the introductory text of item c to 
read as follows:]
    c. * * * Pallet must contain only 5-digit bundles of automation 
price and/or Presorted price mail for the same 5-digit scheme under 
L001. * * *
* * * * *
    [Revise the third sentence in the introductory text of item e to 
read as follows:]
    e. * * * Required for bundles containing all other flats or 
nonstandard parcels. * * *
* * * * *
    [Revise the first sentence in the introductory text of item f to 
read as follows:]
    f. 5-digit, required, except for letter trays; permitted for 
bundles, trays, and sacks (nonstandard parcels only). * * *
* * * * *
    [Revise the introductory text of item h to read as follows:]
    h. SCF, required, permitted for bundles, trays, and sacks 
(nonstandard parcels only). The pallet may contain carrier route, 
automation price, and/or Presorted price mail for the 3-digit ZIP Code 
groups in L005. Mailers may place origin mixed ADC (OMX) sacks 
(nonstandard parcels only) or flat trays on origin SCF pallets. 
Labeling:
* * * * *
    [Revise the first sentence in the introductory text of item i to 
read as follows:]
    i. ADC, required, permitted for bundles, trays, and sacks 
(nonstandard parcels only). * * *
* * * * *

8.10.3 USPS Marketing Mail--Bundles, Sacks, or Trays

    [Revise the fifth and sixth sentence of the introductory text of 
8.10.3 to read as follows:]
    * * * For parcels, use this preparation only for nonstandard 
parcels in sacks. Palletize unbundled or unsacked nonstandard parcels 
under 8.10.8. * * *
* * * * *
    d. 5-digit, required except for trays, permitted for bundles, 
trays, and sacks (when applicable). * * * * * * Labeling:
* * * * *
    [Revise the first sentence of item d2 to read as follows:]
    2. Line 2: For flats and nonstandard parcels, use ``STD'' followed 
by ``FLTS'' or ``NONSTD,'' as applicable; followed by ``5D'' followed 
by ``BARCODED'' (or ``BC'') if the pallet contains automation-price 
mail; followed by ``NONBARCODED'' (or ``NBC'') if the pallet contains 
Presorted-price mail. * * *
* * * * *
    [Revise the first sentence in the introductory text of item f to 
read as follows:]
    f. SCF, required, permitted for bundles, trays, and sacks 
(nonstandard parcels only). * * *
* * * * *
    [Revise the first sentence in the text of item f2 to read as 
follows:]
    2. Line 2: For flats and nonstandard parcels, ``STD'' followed by 
``FLTS'' or ``NONSTD,'' as applicable; followed by ``SCF''; followed by 
``BARCODED'' (or ``BC'') if pallet contains automation price mail; 
followed by ``NONBARCODED'' (or ``NBC'') if pallet contains carrier 
route and/or Presorted price mail. * * *
    g. ASF, required unless bundle reallocation is used under 8.13, 
permitted for bundles, trays, and sacks (nonstandard parcels only). * * 
* * * * Labeling:
* * * * *
    [Revise the first sentence in the text of item g2 to read as 
follows:]
    2. Line 2: For flats and nonstandard parcels, ``STD'' followed by 
``FLTS'' or ``NONSTD,'' as applicable; followed by ``ASF''; followed by 
``BARCODED'' (or ``BC'') if pallet contains automation price mail; 
followed by ``NONBARCODED'' (or ``NBC'') if pallet contains carrier 
route and/or Presorted price mail. * * *
    [Revise the first sentence in the introductory text of item h to 
read as follows:]
    h. NDC, required, permitted for bundles, trays, and sacks 
(nonstandard parcels only). * * *
* * * * *
    [Revise the first sentence in the text of item h2 to read as 
follows:]
    2. Line 2: For flats and nonstandard parcels, ``STD'' followed by 
``FLTS'' or ``NONSTD,'' as applicable; followed by ``NDC''; followed by 
``BARCODED'' (or ``BC'') if pallet contains automation price mail; 
followed by ``NONBARCODED'' (or ``NBC'') if pallet contains carrier 
route and/or Presorted price mail. * * *

[[Page 53929]]

    [Revise the introductory text of item i to read as follows:]
    i. Mixed NDC, optional, permitted for bundles, trays, and sacks 
(nonstandard parcels only); allowed with no minimum and required at 100 
pounds of mail for bundles of flats. Bundles of flats totaling less 
than 100 pounds in weight must be trayed if not palletized. The pallet 
may contain carrier route, automation, and/or Presorted mail. Mailers 
must place trays and sacks (nonstandard parcels only) containing pieces 
paid at the single-piece price on the mixed NDC pallet (unless required 
to be presented separately by special postage payment authorization). 
Labeling:
* * * * *
    [Revise the first sentence in the text of item i2 to read as 
follows:]
    2. Line 2: For flats and nonstandard parcels, ``STD'' followed by 
``FLTS'' or ``NONSTD,'' as applicable; followed by ``BARCODED'' (or 
``BC'') if pallet contains automation price mail; followed by 
``NONBARCODED'' (or ``NBC'') if pallet contains carrier route and/or 
Presorted price mail; followed by ``WKG.'' * * *
* * * * *
    [Revise the heading of 8.10.5 to read as follows:]

8.10.5 Package Services Nonstandard Parcels--Bundles and Sacks

    [Revise the fifth sentence of 8.10.5 to read as follows:]
    * * * At the mailer's option, all Package Services nonstandard 
parcels also may be prepared for destination entry (see 7.0). * * *
    a. Merged 5-digit scheme, required, permitted for bundles only. * * 
* * * * Labeling:
* * * * *
    [Revise the text of item a2 to read as follows:]
    2. Line 2: ``PSVC NONSTD CR/5D''; followed by ``SCHEME'' (or 
``SCH'').
    b. 5-digit scheme carrier routes, required, permitted for bundles 
only. * * * * * * Labeling:
* * * * *
    [Revise the text of item b2 to read as follows:]
    2. Line 2: ``PSVC NONSTD''; followed by ``CARRIER ROUTES'' (or 
``CR-RTS''); followed by ``SCHEME'' (or ``SCH'').
    c. 5-digit scheme, required, permitted for bundles only. * * * * * 
* Labeling:
* * * * *
    [Revise the text of item c2 to read as follows:]
    2. Line 2: ``PSVC NONSTD 5D''; followed by ``SCHEME'' (or ``SCH'').
    d. Merged 5-digit, required, permitted for bundles only. * * * * * 
* Labeling:
* * * * *
    [Revise the text of item d2 to read as follows:]
    2. Line 2: ``PSVC NONSTD CR/5D.''
    e. 5-digit carrier routes, required, permitted for bundles and 
sacks. * * * * * * Labeling:
* * * * *
    [Revise the text of item e2 to read as follows:]
    2. Line 2: ``PSVC NONSTD''; followed by ``CARRIER ROUTES'' (or 
``CR-RTS'').
    f. 5-digit, required, permitted for bundles and sacks. * * * * * * 
Labeling:
* * * * *
    [Revise the text of item f2 to read as follows:]
    2. Line 2: ``PSVC NONSTD 5D.''
    g. 3-digit, optional, option not available for bundles for 3-digit 
ZIP Code prefixes marked ``N'' in L002. * * * * * * Labeling:
* * * * *
    [Revise the text of item g2 to read as follows:]
    2. Line 2: ``PSVC NONSTD 3D.''
    h. SCF, required, permitted for bundles and sacks. * * * * * * 
Labeling:
* * * * *
    [Revise the text of item h2 to read as follows:]
    2. Line 2: ``PSVC NONSTD SCF.''
    i. ASF, required, permitted for bundles and sacks. * * * * * * 
Labeling:
* * * * *
    [Revise the text of item i2 to read as follows:]
    2. Line 2: ``PSVC NONSTD ASF.''
    j. NDC, required, permitted for bundles and sacks. * * * * * * 
Labeling:
* * * * *
    [Revise the text of item j2 to read as follows:]
    2. Line 2: ``PSVC NONSTD NDC.''
    k. Mixed NDC, optional, permitted for sacks only. * * * * * * 
Labeling:
* * * * *
    [Revise the text of item k2 to read as follows:]
    2. Line 2: ``PSVC NONSTD WKG.''
* * * * *
    [Revise the heading and introductory text of 8.10.8 to read as 
follows:]

8.10.8 Nonstandard Parcels Weighing 2 Ounces or More--USPS Marketing 
Mail, Including Marketing Parcels

    Mailers who palletize unbundled or unsacked nonstandard parcels 
must make pallets or pallet boxes when there are 250 pounds or more for 
the destination levels below for DNDC, DSCF, or DDU prices. When 
prepared at origin, a 200-pound minimum is required for the NDC price. 
Prepare pallets or pallet boxes of nonstandard parcels (except tubes, 
rolls, and similar pieces) weighing 2 ounces or more under 8.0 and in 
the sequence listed below. Label pallets or pallet boxes according to 
the Line 1 and Line 2 information listed below and under 8.6. Mailers 
may not prepare tubes, rolls, and similar pieces or pieces that weigh 
less than 2 ounces on pallets or in pallet boxes, except for pieces in 
carrier route bundles or in sacks under 8.10.3. Preparation sequence 
and labeling:
    a. 5-digit scheme, required. * * * * * * Labeling:
* * * * *
    [Revise the text of item a2 to read as follows:]
    2. Line 2: ``STD NONSTD 5D''; followed by ``SCHEME'' (or ``SCH'').
    b. 5-digit, required. * * * * * * Labeling:
* * * * *
    [Revise the text of item b2 to read as follows:]
    2. Line 2: ``STD NONSTD 5D.''
    c. SCF, required. Allowed only for mail deposited at a DSCF to 
claim SCF price; labeling:
* * * * *
    [Revise the text of item c2 to read as follows:]
    2. Line 2: Use ``STD NONSTD SCF.''
    d. ASF, optional, but required for DNDC prices. * * * * * * 
Labeling:
* * * * *
    [Revise the text of item d2 to read as follows:]
    2. Line 2: ``STD NONSTD ASF.''
    e. NDC, required. * * * * * * Labeling:
* * * * *
    [Revise the text of item e2 to read as follows:]
    2. Line 2: ``STD NONSTD NDC.''
    f. Origin NDC (required); no minimum; labeling:
* * * * *
    [Revise the text of item f2 to read as follows:]
    2. Line 2: ``STD NONSTD NDC.''
    g. Mixed NDC, optional. Labeling:
* * * * *
    [Revise the text of item g2 to read as follows:]
    2. Line 2: ``STD NONSTD WKG.''
    [Revise the heading of 8.11 to read as follows:]

8.11 Bundle Reallocation To Protect SCF Pallet for Periodicals Flats 
and Nonstandard Parcels and USPS Marketing Mail Flats on Pallets

* * * * *

[[Page 53930]]

8.11.3 Reallocation of Bundles if Optional 3-Digit Pallets Are Prepared

    Reallocation rules are as follows:
* * * * *
    [Revise the last sentence of item d to read as follows:]
    d. * * * Mail that falls beyond the SCF/RPDC pallet level must be 
placed on the next appropriate pallet (ADC/RPDC, ASF/RPDC, NDC/RPDC or 
MNDC/MRPDC) or in the next appropriate sack (nonstandard parcels) or 
flat tray.

8.11.4 Reallocation of Bundles if Optional 3-Digit Pallets Are Not 
Prepared

    Reallocation rules are as follows:
* * * * *
    [Revise the last sentence of item b to read as follows:]
    b. * * * Mail that falls beyond the SCF/RPDC pallet level must be 
placed on the next appropriate pallet (ADC/RPDC, ASF/RPDC, NDC/RPDC, or 
MNDC/MRPDC) or in the next appropriate sack (nonstandard parcels) or 
flat tray.
* * * * *
    [Revise the heading of 8.12 to read as follows:]

8.12 Bundle Reallocation To Protect ADC Pallet for Periodicals Flats 
and Nonstandard Parcels on Pallets

* * * * *

8.14 Pallets of Bundles, Sacks, and Trays

* * * * *

8.14.2* * *USPS Marketing Mail

    Additional pallet preparation:
    [Revise the last sentence of item a to read as follows:]
    a. Combined mailings. * * * * * * Mailers may include machinable 
parcels and nonstandard parcels on 5-digit pallets.
* * * * *

8.18 Parcel Select DSCF Prices--Parcels on Pallets

8.18.1 Basic Preparation, Parcels on Pallets

    Unless prepared under 8.18.2, or in sacks, mail must be prepared 
for the DSCF price as follows:
    [Revise the third sentence of item a to read as follows:]
    a. General. * * * Nonstandard pieces under 201.7.6 may be combined 
on the same pallet or in the same overflow sack when sorted to 5-digit 
scheme or 5-digit destinations. * * *
* * * * *

8.18.2 Alternate Preparation, Parcels on Pallets

    DSCF price mailings not prepared under 8.18.1 may be prepared as 
follows:
    [Revise the third sentence of item a to read as follows:]
    a. General. * * * Nonstandard pieces under 201.7.6 may be combined 
on the same pallet. * * *
* * * * *

8.20 Parcel Select and Bound Printed Matter DDU Prices

    [Revise the fourth sentence in the introductory text of 8.20 to 
read as follows:]
    * * * Nonstandard pieces under 201.7.6 may be combined. * * *
* * * * *

9.0 Combining Bundles of Automation and Nonautomation Flats in Flat 
Trays and Sacks

* * * * *

9.2 Periodicals

* * * * *

9.2.4 Optional Sack Preparation and Labeling

    [Revise the fifth sentence in the introductory text of 9.2.4 to 
read as follows:]
    * * * If, due to the physical size of the mailpieces, the 
machinable barcoded price pieces are considered flat-size under 201.6.0 
and the machinable nonbarcoded price pieces are considered nonstandard 
parcels under 201.7.6, the processing category shown on the sack label 
must show ``FLTS.'' * * *
* * * * *

10.0 Merging Bundles of Flats Using the City State Product

* * * * *

10.1.4 Sack and Flat-Tray Preparation and Labeling

    [Revise the introductory text of 10.1.4 to read as follows:]
    All carrier route bundles must be placed in sacks/flat trays under 
10.1.4a through 10.1.4e and 10.1.4h as described below. When sorting is 
performed under this section, mailers must prepare merged 5-digit 
scheme sacks (nonstandard parcels) or flat trays, 5-digit scheme 
carrier routes sacks/flat trays, and merged 5-digit sacks (nonstandard 
parcels) or flat trays for all possible 5-digit schemes or 5-digit ZIP 
Codes as applicable, using L001 (merged 5-digit scheme and 5-digit 
scheme carrier routes sort only) and the Carrier Route Indicators field 
in the City State Product when there is enough volume for the 5-digit 
scheme or 5-digit ZIP Code to prepare such sacks (nonstandard parcels) 
or flat trays under 10.1.4. Mailers must label sacks/flat trays 
according to the Line 1 and Line 2 information listed below and under 
207.20.1. If, due to the physical size of the mailpieces, the barcoded 
pieces are considered flat-size under 207.26.0, and the carrier route 
pieces and nonbarcoded pieces are considered nonstandard parcels under 
201.7.6, ``FLTS'' must be shown as the processing category on the sack/
tray label. If a mailing job does not contain barcoded price pieces and 
the carrier route pieces and the nonbarcoded pieces are nonstandard 
parcel shaped, use ``NONSTD'' for the processing category on the 
contents line of the label. Mailers must prepare sacks containing 
carrier route and 5-digit bundles from the carrier route, barcoded, and 
nonbarcoded mailings in the mailing job in the following manner and 
sequence:
* * * * *
    [Revise the text of item h to read as follows:]
    h. Merged 3-digit. Required for carrier route, 5-digit, and 5-digit 
scheme bundles remaining after preparing sacks (nonstandard parcels 
only) or flat trays under 10.1.4a through 10.1.4g, and any 3-digit and 
3-digit scheme bundles with a minimum of 24 pieces for a 3-digit area. 
Labeling:
* * * * *

12.0 Merging Bundles of Flats on Pallets Using a 5 Percent Threshold

* * * * *

12.1.5 Pallet Preparation and Labeling

    [Revise the text in the fourth and last sentence of 12.1.5 to read 
as follows:]
    * * * If, due to the physical size of the mailpieces, the barcoded 
price pieces are considered flat size under 201.6.0 and the carrier 
route sorted pieces and nonbarcoded price pieces are considered 
nonstandard parcels under 201.7.6, ``FLTS'' must be shown as the 
processing category on the pallet label. If a mailing contains no 
barcoded price pieces and the carrier route pieces and the nonbarcoded 
pieces are nonstandard parcels, use ``NONSTD for the processing 
category on the contents line of the pallet label. Prepare and label 
pallets as follows:
* * * * *
    [Revise the second sentence of item c to read as follows:]
    c. * * * Required for all other flats and nonstandard parcels. * * 
*
* * * * *

[[Page 53931]]

13.0 Merging Bundles of Flats on Pallets Using the City State Product 
and a 5 Percent Threshold

* * * * *

13.1.5 Pallet Preparation and Labeling

    [Revise the fourth and last sentence of 13.1.5 to read as follows:]
    * * * If, due to the physical size of the mailpieces, the barcoded 
price pieces are considered flat-size under 201.6.0 and the carrier 
route sorted pieces and nonbarcoded price pieces are considered 
nonstandard parcels under 201.7.6, ``FLTS'' must be shown as the 
processing category on the pallet label. If a mailing contains no 
barcoded price pieces and the carrier route pieces and the nonbarcoded 
of pieces are nonstandard parcels, use ``NONSTD'' for the processing 
category on the contents line of the pallet label. Prepare and label 
pallets as follows:
* * * * *

21.0 Optional Combined Parcel Mailings

* * * * *

21.3 Mail Preparation

21.3.1 Basic Standards

    Prepare combined mailings as follows:
    a. Different parcel types must be prepared separately for combined 
parcel mailings as indicated below:
* * * * *
    [Revise the text of items a2 and a3 to read as follows:]
    2. USPS Marketing Mail, Parcel Select, and Package Services 
nonstandard parcels, except for tubes, rolls, triangles, and other 
similarly nonstandard-shaped pieces: Use ``STD/PSVC'' for line 2 
content labeling.
    3. USPS Marketing Mail, Parcel Select, and Package Services tubes, 
rolls, triangles, and similarly nonstandard-shaped parcels: Use ``STD/
PSVC NONSTD'' for line 2 content labeling.
* * * * *

21.3.3 Combining USPS Marketing Mail, Parcel Select, and Package 
Services APPS-Machinable Parcels

    [Revise the text of 21.3.3 to read as follows:]
    Prepare and enter USPS Marketing Mail, Parcel Select, and Package 
Services nonstandard parcels, that are not tubes, rolls, triangles, or 
similarly nonstandard-shaped parcels) as combined APPS-machinable 
parcels as shown in the table below.
* * * * *

Index

* * * * *

B

* * * * *

Bound Printed Matter, Commercial Parcels

* * * * *
    [Revise the ``carrier route irregular parcels'' line item under 
``Bound Printed Matter, Commercial Parcels'' to read as follows:]
    carrier route nonstandard parcels, 265.9.2, 265.9.3
* * * * *
    [Revise the ``presorted irregular parcels'' line item under ``Bound 
Printed Matter, Commercial Parcels'' to read as follows:]
    presorted nonstandard parcels, 265.8.2, 265.8.3
* * * * *
    [Revise the ``nonmachinable parcels'' line item under ``Bound 
Printed Matter, Commercial Parcels'' to read as follows:]
    nonstandard parcels, 201.7.6
* * * * *
    [Revise the ``bundles of irregular parcels on pallets'' line item 
under ``Bound Printed Matter, Commercial Parcels'' to read as follows:]
    bundles of nonstandard parcels on pallets, 705.8.10.5
* * * * *
    [Revise the ``carrier route irregular parcels'' line item under 
``Bound Printed Matter, Commercial Parcels'' to read as follows:]
    carrier route nonstandard parcels, 265.9.2, 265.9.3
* * * * *
    [Revise the ``presorted irregular parcels'' line item under ``Bound 
Printed Matter, Commercial Parcels'' to read as follows:]
    presorted nonstandard parcels, 265.8.2, 265.8.3
* * * * *
    [Revise the ``sacks of irregular parcels on pallets'' line item 
under ``Bound Printed Matter, Commercial Parcels'' to read as follows:]
    sacks of nonstandard parcels on pallets, 705.8.10.5
* * * * *

I

* * * * *
    [Delete the ``Irregular parcels'' line item under ``I''.]
* * * * *

L

* * * * *

Library Mail, Commercial Parcels

* * * * *
    [Revise the ``irregular parcels'' and ``irregular parcels on 
pallets'' line items under ``Library Mail, Commercial Parcels'' to read 
as follows:]
    nonstandard parcels, 275.6.3
    nonstandard parcels on pallets, 705.8.10.5
* * * * *
    [Delete the second duplicated line item ``irregular parcels'' after 
the ``bundles'' line item.]
* * * * *
    [Revise the ``nonmachinable parcels'' line item under ``Library 
Mail, Commercial Parcels'' to read as follows:]
    nonstandard parcels, 201.7.6
* * * * *

M

* * * * *

Media Mail, Commercial Parcels

* * * * *
    [Revise the ``irregular parcels'' and ``irregular parcels on 
pallets'' line items under ``Media Mail, Commercial Parcels'' to read 
as follows:]
    nonstandard parcels, 275.6.3
    nonstandard parcels on pallets, 705.8.10.5
* * * * *
    [Revise the ``nonmachinable parcels'' line item under ``Media Mail, 
Commercial Parcels'' to read as follows:]
    nonstandard parcels, 201.7.6
* * * * *

N

* * * * *
    [Revise the ``nonmachinable'' line item under ``N'' to read as 
follows:]

Nonstandard

* * * * *
    [Revise the ``Parcel Select'' line item under the renamed 
``nonstandard'' to read as follows:]
    Parcel Select, 201.7.6
* * * * *

P

* * * * *

Parcel Select

* * * * *
    [Revise the ``irregular parcels on pallets'' line item under 
``Parcel Select'' to read as follows:]
    nonstandard parcels on pallets, 705.8.10.5
* * * * *
    [Revise the ``nonmachinable parcels on pallets'' line item under 
``Parcel Select'' to read as follows:]
    nonstandard parcels on pallets, 705.8.18.2
* * * * *

[[Page 53932]]

    [Revise the ``nonmachinable parcels'' line item under ``Parcel 
Select'' to read as follows:]
    nonstandard parcels, 201.7.6
* * * * *

Parcels

    [Revise the ``nonmachinable criteria'' heading under ``parcels'' to 
read as follows:]
    nonstandard criteria
    [Revise the ``commercial mail'' line item under renamed 
``nonstandard criteria'' to read as follows:]
    commercial mail, 201.7.6
* * * * *

Periodicals

* * * * *
    [Revise the ``carrier route irregular parcels in sacks'' line item 
under ``Periodicals'' to read as follows:]
    carrier route nonstandard parcels in sacks, 207.23.4
* * * * *
    [Revise the ``irregular parcels in sacks'' line item under 
``Periodicals'' to read as follows:]
    nonstandard parcels in sacks, 207.22.6
* * * * *

S

* * * * *

Size

* * * * *
    [Revise the ``nonmachinable parcels'' line item under ``Size'' to 
read as follows:]
    nonstandard parcels, 101.3.0, 201.7.0
* * * * *

U

* * * * *

USPS Marketing Mail, Parcels

* * * * *
    [Revise the ``bundling for irregular parcels'' line item under 
``USPS Marketing Mail, parcels'' to read as follows:]
    bundling for nonstandard parcels, 245.11.4, 245.12.5
* * * * *
    [Revise the ``presorted irregular parcels'' line item under ``USPS 
Marketing Mail, parcels'' to read as follows:]
    presorted nonstandard parcels, 245.11.4
* * * * *

Ruth Stevenson,
Attorney, Ethics and Legal Compliance.
[FR Doc. 2024-13924 Filed 6-27-24; 8:45 am]
BILLING CODE P