Availability of Revised Guideline for Controlling Retained Water in Raw Meat and Poultry, 22331-22333 [2024-06837]

Download as PDF 22331 Rules and Regulations Federal Register Vol. 89, No. 63 Monday, April 1, 2024 This section of the FEDERAL REGISTER contains regulatory documents having general applicability and legal effect, most of which are keyed to and codified in the Code of Federal Regulations, which is published under 50 titles pursuant to 44 U.S.C. 1510. The Code of Federal Regulations is sold by the Superintendent of Documents. DEPARTMENT OF AGRICULTURE Food Safety and Inspection Service 9 CFR Part 441 [Docket No. FSIS–2022–0014] Availability of Revised Guideline for Controlling Retained Water in Raw Meat and Poultry Food Safety and Inspection Service (FSIS), U.S. Department of Agriculture (USDA). ACTION: Notice of availability and request for comments. AGENCY: FSIS is announcing the availability of a guideline to assist meat (including Siluriformes fish and fish products) and poultry establishments in meeting the regulatory requirements for calculating the correct retained water percentage in raw livestock, poultry, and Siluriformes fish carcasses and parts resulting from post-evisceration processing, and the proper labeling of these products. FSIS is also announcing when the Agency will start verifying that establishments are correctly calculating retained water in applicable product. The guideline clarifies the methods an establishment may use to collect and use data to determine the amount of retained water in a product covered by its retained water protocol (RWP). In addition, it provides specific information on protocol development, process control, and air-chilled product claims. DATES: Submit comments on or before May 31, 2024. Establishments will have until September 30, 2024, to submit their revised protocols to the Risk Management and Innovations Staff (RMIS) via askFSIS for review. Establishments will have until April 1, 2025, to make any necessary label changes. Unless the Agency receives substantive comments that warrant further review, RMIS will stop ddrumheller on DSK120RN23PROD with RULES1 SUMMARY: VerDate Sep<11>2014 15:59 Mar 29, 2024 Jkt 262001 reviewing RWPs April 1, 2025. After that date, the RWPs will be reviewed by inspection program personnel (IPP). ADDRESSES: A downloadable version of the guideline is available at https:// www.fsis.usda.gov/policy/fsisguidelines. FSIS invites interested persons to submit comments on this guideline. Comments may be submitted by one of the following methods: Federal eRulemaking Portal: This website provides the ability to type short comments directly into the comment field on the web page or attach a file for lengthier comments. Go to https://www.regulations.gov. Follow the on-line instructions at that site for submitting comments. Mail: Send to Docket Clerk, U.S. Department of Agriculture, Food Safety and Inspection Service, 1400 Independence Avenue SW, Mailstop 3758, Washington, DC 20250–3700. Hand- or courier-delivered submittals: Deliver to 1400 Independence Avenue SW, Jamie L. Whitten Building, Room 350–E, Washington, DC 20250–3700. Instructions: All items submitted by mail or electronic mail must include the agency name and docket number FSIS– 2022–0014. Comments made in response to the docket will be made available for public inspection and posted without change, including any personal information, to https:// www.regulations.gov. Docket: For access to background documents or comments received, call (202) 205–0495 to schedule a time to visit the FSIS Docket Room at 1400 Independence Avenue SW, Washington, DC 20250. FOR FURTHER INFORMATION CONTACT: Rachel A. Edelstein, Assistant Administrator, Office of Policy and Program Development, FSIS; Telephone: (202) 205–0495. SUPPLEMENTARY INFORMATION: Background On January 9, 2001, FSIS published the final rule ‘‘Retained Water in Raw Meat and Poultry Products; Poultry Chilling Requirements’’ (66 FR 1750), which set limits for water retained by raw, single-ingredient, meat and poultry products from post-evisceration processing, such as carcass washing and chilling. On December 2, 2015, FSIS amended its retained water regulations to include fish of the order Siluriformes PO 00000 Frm 00001 Fmt 4700 Sfmt 4700 and products derived from these fish (80 FR 75590). Under 9 CFR 441.10, raw livestock, poultry, and Siluriformes fish carcasses and parts (hereinafter, ‘‘meat and poultry products’’) are not permitted to retain water from postevisceration processing unless the establishment preparing those carcasses and parts demonstrates to FSIS, with data collected in accordance with a written RWP, that any water retained is from addressing food safety requirements. In addition, the establishment is required to disclose on the product’s label the maximum percentage of retained water in the raw product (9 CFR 441.10(b)). The required labeling statement is intended to help consumers make informed purchasing decisions. In 2005, FSIS issued the ‘‘Compliance Guidelines for Retained Water’’ to assist establishments in developing and carrying out their RWPs. The revised guideline represents the Agency’s current thinking on retained water requirements and includes new updates based on the latest scientific information. FSIS is encouraging establishments that have been using the previous version of the guideline to update their protocols with the recommendations in the new guideline in order to ensure their data are reproducible and statistically verifiable. FSIS will update the guideline, as necessary, as new information become available. Revised Guideline Recently, RMIS conducted a review of older RWPs and found that establishments were not correctly applying formulae when determining changes in total moisture percentage in products after water spray or immersion processing. For example, many establishments subtract the pre-pack moisture percentages from the postevisceration moisture percentages to calculate the retained water. However, these percentages are represented by different bases (or denominators). The post-evisceration moisture percentage reflects the dry weight and the natural water weight of the carcass. The prepack moisture percentage reflects the dry weight, the natural water weight (the amount of water that is in the bird naturally, prior to any aqueous applications), and the retained water weight. Therefore, FSIS is making available a revised version of its 2005 guideline for E:\FR\FM\01APR1.SGM 01APR1 ddrumheller on DSK120RN23PROD with RULES1 22332 Federal Register / Vol. 89, No. 63 / Monday, April 1, 2024 / Rules and Regulations retained water to clarify for inspected establishments the ways that they can collect and use data to determine the amount of retained water in the products covered by their RWPs. The updated guideline includes better explanations of the measurement formulae used in determining retained water percentages. It provides the mathematical formulae for calculating retained water using the weight of the carcasses, the mathematical formulae for calculating the moisture percentages, and the mathematical formulae for calculating retained water using moisture percentages. The guidance also explains that establishments should have large enough sample sizes to ensure that they are getting accurate results. In addition, the guidance expands on what constitutes acceptable analysis and conclusions of the retained water data for labeling purposes, to include demonstrating that a given package in a lot retains no more water than what is declared on the label, within a 20% margin of error. The guideline recommends that establishments verify the retained water in their products at a frequency that ensures they are maintaining process control of the retained water in their systems, i.e., that the retained water percentages do not exceed the labeling declarations over time. The guideline also provides information needed for retained water testing methods to be applied, such as the number of carcasses tested, the carcass type (e.g., specific poultry carcass type), weight of carcass at each point tested, time period tested, the number of sample sets tested, and the frequency of how often retained water is verified for labeling purposes. The updated guideline explains what 9 CFR 441.10 requires an establishment to do when developing a new or revising an existing RWP. For example, an establishment is required to state specifically the type of product (e.g., carcass or giblets) to which the data apply. The guideline recommends that a flow chart of the establishment’s process be included in the RWP. FSIS has removed the regulatory pathogen reduction performance standards for Salmonella (9 CFR 310.25(b) and 9 CFR 381.94(b)) that are no longer in the regulations. The guideline recommends providing temperature reduction throughout the process. It also recommends including information on all antimicrobial treatments, not just the chiller, when describing special features of the chilling system. In addition, the guidance provides recommendations on water retention when using dips or VerDate Sep<11>2014 15:59 Mar 29, 2024 Jkt 262001 sprays as interventions applied to beef trim, pork cuts, or poultry parts. FSIS removed references to variables affecting retained water that occur preevisceration, such as scalding temperatures. FSIS also removed outdated information concerning testing various chiller settings. RWP Review Process In accordance with 9 CFR 441.10(c)(2), establishments must notify FSIS as soon as they have new or revised RWPs available for review by the Agency. Currently, establishments submit new and revised RWPs to RMIS, in the Agency’s Office of Policy and Program Development, for review. Establishments will have until September 30, 2024, to submit their revised protocols to RMIS. All meat and poultry establishments using incorrect formulae must submit revised protocols to RMIS (for single-ingredient products in which water was applied, whether that be a dip or a spray), if their processes result in retained water. Establishments need a system to show whether the products retain water. If RMIS finds a problem with the methodology, the establishments will need to address the noncompliance with the methodology immediately, so that they have enough time to collect new samples to determine the amount of retained water and adjust their labeling prior to April 1, 2025. Establishments may continue selling product while they fix the methodology in their RWPs and determine the amount of retained water. Labeling As stated above, the guidance provides information on analyzing the retained water data for labeling determinations. It also covers the retained water labeling of giblets, products intended for export (like dark-meat chicken parts), marinated products, products that are subject to religious or dietary exemptions, and products sold at retailservice counters. FSIS is providing establishments with additional time to correct the information. By April 1, 2025, establishments must have accurate, supportable retained water statements on their labels. If the statements are found to be inaccurate, IPP will issue noncompliance reports and tag product. FSIS chose April 1, 2025, as that should give establishments enough time to submit their protocols to FSIS, for FSIS to review the protocols, and for establishments to revise the information, if needed. PO 00000 Frm 00002 Fmt 4700 Sfmt 4700 Additional Public Notification Public awareness of all segments of rulemaking and policy development is important. Consequently, FSIS will announce this notice online through the FSIS web page located at: https:// www.fsis.usda.gov/wps/portal/fsis/ topics/regulations/federal-register. FSIS also will make copies of this Federal Register publication available through the FSIS Constituent Update, which is used to provide information regarding FSIS policies, procedures, regulations, Federal Register notices, FSIS public meetings, and other types of information that could affect or would be of interest to our constituents and stakeholders. The Constituent Update is available on the FSIS web page. In addition, FSIS offers an email subscription service which provides automatic and customized access to selected food safety news and information. This service is available at: https://www.fsis.usda.gov/subscribe. Options range from recalls to export information, regulations, directives, and notices. Customers can add or delete subscriptions themselves and have the option to password-protect their accounts. USDA Non-Discrimination Statement In accordance with Federal civil rights law and USDA civil rights regulations and policies, USDA, its Mission Areas, agencies, staff offices, employees, and institutions participating in or administering USDA programs are prohibited from discriminating based on race, color, national origin, religion, sex, gender identity (including gender expression), sexual orientation, disability, age, marital status, family/parental status, income derived from a public assistance program, political beliefs, or reprisal or retaliation for prior civil rights activity, in any program or activity conducted or funded by USDA (not all bases apply to all programs). Remedies and complaint filing deadlines vary by program or incident. Program information may be made available in languages other than English. Persons with disabilities who require alternative means of communication to obtain program information (e.g., Braille, large print, audiotape, American Sign Language) should contact the responsible Mission Area, agency, or staff office; the USDA TARGET Center at (202) 720–2600 (voice and TTY); or the Federal Relay Service at (800) 877–8339. To file a program discrimination complaint, a complainant should complete a Form AD–3027, USDA E:\FR\FM\01APR1.SGM 01APR1 Federal Register / Vol. 89, No. 63 / Monday, April 1, 2024 / Rules and Regulations Program Discrimination Complaint Form, which can be obtained online at https://www.usda.gov/forms/electronicforms, from any USDA office, by calling (866) 632–9992, or by writing a letter addressed to USDA. The letter must contain the complainant’s name, address, telephone number, and a written description of the alleged discriminatory action in sufficient detail to inform the Assistant Secretary for Civil Rights (ASCR) about the nature and date of an alleged civil rights violation. The completed AD–3027 form or letter must be submitted to USDA by: (1) Mail: U.S. Department of Agriculture, Office of the Assistant Secretary for Civil Rights, 1400 Independence Avenue SW, Washington, DC 20250–9410; or (2) Fax: (833) 256–1665 or (202) 690– 7442; or (3) Email: program.intake@usda.gov USDA is an equal opportunity provider, employer, and lender. Paul Kiecker, Administrator. [FR Doc. 2024–06837 Filed 3–29–24; 8:45 am] BILLING CODE 3410–DM–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2024–0459; Project Identifier MCAI–2024–00117–T; Amendment 39–22696; AD 2024–05–05] RIN 2120–AA64 Airworthiness Directives; ATR—GIE Avions de Transport Re´gional Airplanes; Correction Federal Aviation Administration (FAA), DOT. ACTION: Final rule; request for comment; correction. AGENCY: The FAA is correcting an airworthiness directive (AD) that was published in the Federal Register. That AD applies to all ATR–GIE Avions de Transport Regional Model ATR42 and ATR72 airplanes. As published, the effective, incorporation by reference approval, and comment submittal dates specified in the preamble of the preceding correction are incorrect. This document corrects those errors. In all other respects, the original document remains the same. DATES: This correction is effective March 29, 2024. The effective date of AD 2024–05–05 remains March 29, 2024. The date for submitting comments ddrumheller on DSK120RN23PROD with RULES1 SUMMARY: VerDate Sep<11>2014 15:59 Mar 29, 2024 Jkt 262001 on AD 2024–05–05 remains April 29, 2024. The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of March 29, 2024 (89 FR 18534, March 14, 2024; corrected March 26, 2024 (89 FR 20849)). ADDRESSES: AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA–2024–0459; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule; request for comment; correction, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M– 30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE, Washington, DC 20590. Material Incorporated by Reference: • For material incorporated by reference in this AD, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email ADs@easa.europa.eu; website easa.europa.eu. You may find this IBR material on the EASA website at ad.easa.europa.eu. • You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. It is also available in the AD docket at regulations.gov under Docket No. FAA– 2024–0459. FOR FURTHER INFORMATION CONTACT: Shahram Daneshmandi, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone: 206–231–3220; email: Shahram.Daneshmandi@faa.gov. SUPPLEMENTARY INFORMATION: Comments Invited The FAA invites you to send any written relevant data, views, or arguments about AD 2024–05–05. Submit comments as instructed in AD 2024–05–05, Amendment 39–22696 (89 FR 18534, March 14, 2024; corrected March 26, 2024 (89 FR 20849)) (AD 2024–05–05). Background AD 2024–05–05 requires accomplishing a functional check of an affected part, replacing an affected part if necessary, and reporting the functional check results, and prohibits the installation of affected parts. That PO 00000 Frm 00003 Fmt 4700 Sfmt 4700 22333 AD applies to all ATR—GIE Avions de Transport Re´gional Model ATR42 and ATR72 airplanes. Need for the Correction As published, the effective, incorporation by reference approval, and comment submittal dates specified in the preamble of the preceding correction to AD 2024–05–05 are incorrect. The correct effective and incorporation by reference approval date is March 29, 2024. The correct date for submitting comments is April 29, 2024. Related Service Information Under 1 CFR Part 51 EASA Emergency AD 2024–0044–E specifies the following procedures: • Accomplishing a functional check of an affected part. • Replacing an affected part with a serviceable part, if any discrepancy is detected during the functional check. (A discrepancy is any amount of air that flows through either connector of the right engine extinguishing system when compressed air is passed through either connector of the left engine extinguishing system, and vice versa.) • Reporting inspection (i.e., functional check) results to the airplane manufacturer. • Prohibiting the installation of affected parts. This material is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section. Correction of Publication This document corrects errors in the preceding correction to AD 2024–05–05 and correctly adds the AD as an amendment to 14 CFR 39.13. Although no other part of the preamble or regulatory information has been corrected, the FAA is publishing the entire rule in the Federal Register. The effective date of this AD remains March 29, 2024. Since this action only corrects the preceding correction for AD 2024–05– 05, it has no adverse economic impact and imposes no additional burden on any person. Therefore, the FAA has determined that notice and public procedures are unnecessary. List of Subjects in 14 CFR Part 39 Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety. Adoption of the Amendment Accordingly, pursuant to the authority delegated to me by the E:\FR\FM\01APR1.SGM 01APR1

Agencies

[Federal Register Volume 89, Number 63 (Monday, April 1, 2024)]
[Rules and Regulations]
[Pages 22331-22333]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2024-06837]



========================================================================
Rules and Regulations
                                                Federal Register
________________________________________________________________________

This section of the FEDERAL REGISTER contains regulatory documents 
having general applicability and legal effect, most of which are keyed 
to and codified in the Code of Federal Regulations, which is published 
under 50 titles pursuant to 44 U.S.C. 1510.

The Code of Federal Regulations is sold by the Superintendent of Documents. 

========================================================================


Federal Register / Vol. 89, No. 63 / Monday, April 1, 2024 / Rules 
and Regulations

[[Page 22331]]



DEPARTMENT OF AGRICULTURE

Food Safety and Inspection Service

9 CFR Part 441

[Docket No. FSIS-2022-0014]


Availability of Revised Guideline for Controlling Retained Water 
in Raw Meat and Poultry

AGENCY: Food Safety and Inspection Service (FSIS), U.S. Department of 
Agriculture (USDA).

ACTION: Notice of availability and request for comments.

-----------------------------------------------------------------------

SUMMARY: FSIS is announcing the availability of a guideline to assist 
meat (including Siluriformes fish and fish products) and poultry 
establishments in meeting the regulatory requirements for calculating 
the correct retained water percentage in raw livestock, poultry, and 
Siluriformes fish carcasses and parts resulting from post-evisceration 
processing, and the proper labeling of these products. FSIS is also 
announcing when the Agency will start verifying that establishments are 
correctly calculating retained water in applicable product. The 
guideline clarifies the methods an establishment may use to collect and 
use data to determine the amount of retained water in a product covered 
by its retained water protocol (RWP). In addition, it provides specific 
information on protocol development, process control, and air-chilled 
product claims.

DATES: Submit comments on or before May 31, 2024.
    Establishments will have until September 30, 2024, to submit their 
revised protocols to the Risk Management and Innovations Staff (RMIS) 
via askFSIS for review. Establishments will have until April 1, 2025, 
to make any necessary label changes.
    Unless the Agency receives substantive comments that warrant 
further review, RMIS will stop reviewing RWPs April 1, 2025. After that 
date, the RWPs will be reviewed by inspection program personnel (IPP).

ADDRESSES: A downloadable version of the guideline is available at 
https://www.fsis.usda.gov/policy/fsis-guidelines.
    FSIS invites interested persons to submit comments on this 
guideline. Comments may be submitted by one of the following methods:
    Federal eRulemaking Portal: This website provides the ability to 
type short comments directly into the comment field on the web page or 
attach a file for lengthier comments. Go to https://www.regulations.gov. Follow the on-line instructions at that site for 
submitting comments.
    Mail: Send to Docket Clerk, U.S. Department of Agriculture, Food 
Safety and Inspection Service, 1400 Independence Avenue SW, Mailstop 
3758, Washington, DC 20250-3700.
    Hand- or courier-delivered submittals: Deliver to 1400 Independence 
Avenue SW, Jamie L. Whitten Building, Room 350-E, Washington, DC 20250-
3700.
    Instructions: All items submitted by mail or electronic mail must 
include the agency name and docket number FSIS-2022-0014. Comments made 
in response to the docket will be made available for public inspection 
and posted without change, including any personal information, to 
https://www.regulations.gov.
    Docket: For access to background documents or comments received, 
call (202) 205-0495 to schedule a time to visit the FSIS Docket Room at 
1400 Independence Avenue SW, Washington, DC 20250.

FOR FURTHER INFORMATION CONTACT: Rachel A. Edelstein, Assistant 
Administrator, Office of Policy and Program Development, FSIS; 
Telephone: (202) 205-0495.

SUPPLEMENTARY INFORMATION:

Background

    On January 9, 2001, FSIS published the final rule ``Retained Water 
in Raw Meat and Poultry Products; Poultry Chilling Requirements'' (66 
FR 1750), which set limits for water retained by raw, single-
ingredient, meat and poultry products from post-evisceration 
processing, such as carcass washing and chilling. On December 2, 2015, 
FSIS amended its retained water regulations to include fish of the 
order Siluriformes and products derived from these fish (80 FR 75590). 
Under 9 CFR 441.10, raw livestock, poultry, and Siluriformes fish 
carcasses and parts (hereinafter, ``meat and poultry products'') are 
not permitted to retain water from post-evisceration processing unless 
the establishment preparing those carcasses and parts demonstrates to 
FSIS, with data collected in accordance with a written RWP, that any 
water retained is from addressing food safety requirements. In 
addition, the establishment is required to disclose on the product's 
label the maximum percentage of retained water in the raw product (9 
CFR 441.10(b)). The required labeling statement is intended to help 
consumers make informed purchasing decisions. In 2005, FSIS issued the 
``Compliance Guidelines for Retained Water'' to assist establishments 
in developing and carrying out their RWPs.
    The revised guideline represents the Agency's current thinking on 
retained water requirements and includes new updates based on the 
latest scientific information. FSIS is encouraging establishments that 
have been using the previous version of the guideline to update their 
protocols with the recommendations in the new guideline in order to 
ensure their data are reproducible and statistically verifiable.
    FSIS will update the guideline, as necessary, as new information 
become available.

Revised Guideline

    Recently, RMIS conducted a review of older RWPs and found that 
establishments were not correctly applying formulae when determining 
changes in total moisture percentage in products after water spray or 
immersion processing. For example, many establishments subtract the 
pre-pack moisture percentages from the post-evisceration moisture 
percentages to calculate the retained water. However, these percentages 
are represented by different bases (or denominators). The post-
evisceration moisture percentage reflects the dry weight and the 
natural water weight of the carcass. The pre-pack moisture percentage 
reflects the dry weight, the natural water weight (the amount of water 
that is in the bird naturally, prior to any aqueous applications), and 
the retained water weight.
    Therefore, FSIS is making available a revised version of its 2005 
guideline for

[[Page 22332]]

retained water to clarify for inspected establishments the ways that 
they can collect and use data to determine the amount of retained water 
in the products covered by their RWPs. The updated guideline includes 
better explanations of the measurement formulae used in determining 
retained water percentages. It provides the mathematical formulae for 
calculating retained water using the weight of the carcasses, the 
mathematical formulae for calculating the moisture percentages, and the 
mathematical formulae for calculating retained water using moisture 
percentages.
    The guidance also explains that establishments should have large 
enough sample sizes to ensure that they are getting accurate results. 
In addition, the guidance expands on what constitutes acceptable 
analysis and conclusions of the retained water data for labeling 
purposes, to include demonstrating that a given package in a lot 
retains no more water than what is declared on the label, within a 20% 
margin of error.
    The guideline recommends that establishments verify the retained 
water in their products at a frequency that ensures they are 
maintaining process control of the retained water in their systems, 
i.e., that the retained water percentages do not exceed the labeling 
declarations over time. The guideline also provides information needed 
for retained water testing methods to be applied, such as the number of 
carcasses tested, the carcass type (e.g., specific poultry carcass 
type), weight of carcass at each point tested, time period tested, the 
number of sample sets tested, and the frequency of how often retained 
water is verified for labeling purposes.
    The updated guideline explains what 9 CFR 441.10 requires an 
establishment to do when developing a new or revising an existing RWP. 
For example, an establishment is required to state specifically the 
type of product (e.g., carcass or giblets) to which the data apply. The 
guideline recommends that a flow chart of the establishment's process 
be included in the RWP.
    FSIS has removed the regulatory pathogen reduction performance 
standards for Salmonella (9 CFR 310.25(b) and 9 CFR 381.94(b)) that are 
no longer in the regulations. The guideline recommends providing 
temperature reduction throughout the process. It also recommends 
including information on all antimicrobial treatments, not just the 
chiller, when describing special features of the chilling system. In 
addition, the guidance provides recommendations on water retention when 
using dips or sprays as interventions applied to beef trim, pork cuts, 
or poultry parts.
    FSIS removed references to variables affecting retained water that 
occur pre-evisceration, such as scalding temperatures. FSIS also 
removed outdated information concerning testing various chiller 
settings.

RWP Review Process

    In accordance with 9 CFR 441.10(c)(2), establishments must notify 
FSIS as soon as they have new or revised RWPs available for review by 
the Agency. Currently, establishments submit new and revised RWPs to 
RMIS, in the Agency's Office of Policy and Program Development, for 
review.
    Establishments will have until September 30, 2024, to submit their 
revised protocols to RMIS. All meat and poultry establishments using 
incorrect formulae must submit revised protocols to RMIS (for single-
ingredient products in which water was applied, whether that be a dip 
or a spray), if their processes result in retained water. 
Establishments need a system to show whether the products retain water. 
If RMIS finds a problem with the methodology, the establishments will 
need to address the noncompliance with the methodology immediately, so 
that they have enough time to collect new samples to determine the 
amount of retained water and adjust their labeling prior to April 1, 
2025. Establishments may continue selling product while they fix the 
methodology in their RWPs and determine the amount of retained water.

Labeling

    As stated above, the guidance provides information on analyzing the 
retained water data for labeling determinations.
    It also covers the retained water labeling of giblets, products 
intended for export (like dark-meat chicken parts), marinated products, 
products that are subject to religious or dietary exemptions, and 
products sold at retail-service counters.
    FSIS is providing establishments with additional time to correct 
the information. By April 1, 2025, establishments must have accurate, 
supportable retained water statements on their labels. If the 
statements are found to be inaccurate, IPP will issue noncompliance 
reports and tag product. FSIS chose April 1, 2025, as that should give 
establishments enough time to submit their protocols to FSIS, for FSIS 
to review the protocols, and for establishments to revise the 
information, if needed.

Additional Public Notification

    Public awareness of all segments of rulemaking and policy 
development is important. Consequently, FSIS will announce this notice 
online through the FSIS web page located at: https://www.fsis.usda.gov/wps/portal/fsis/topics/regulations/federal-register.
    FSIS also will make copies of this Federal Register publication 
available through the FSIS Constituent Update, which is used to provide 
information regarding FSIS policies, procedures, regulations, Federal 
Register notices, FSIS public meetings, and other types of information 
that could affect or would be of interest to our constituents and 
stakeholders. The Constituent Update is available on the FSIS web page. 
In addition, FSIS offers an email subscription service which provides 
automatic and customized access to selected food safety news and 
information. This service is available at: https://www.fsis.usda.gov/subscribe. Options range from recalls to export information, 
regulations, directives, and notices. Customers can add or delete 
subscriptions themselves and have the option to password-protect their 
accounts.

USDA Non-Discrimination Statement

    In accordance with Federal civil rights law and USDA civil rights 
regulations and policies, USDA, its Mission Areas, agencies, staff 
offices, employees, and institutions participating in or administering 
USDA programs are prohibited from discriminating based on race, color, 
national origin, religion, sex, gender identity (including gender 
expression), sexual orientation, disability, age, marital status, 
family/parental status, income derived from a public assistance 
program, political beliefs, or reprisal or retaliation for prior civil 
rights activity, in any program or activity conducted or funded by USDA 
(not all bases apply to all programs). Remedies and complaint filing 
deadlines vary by program or incident.
    Program information may be made available in languages other than 
English. Persons with disabilities who require alternative means of 
communication to obtain program information (e.g., Braille, large 
print, audiotape, American Sign Language) should contact the 
responsible Mission Area, agency, or staff office; the USDA TARGET 
Center at (202) 720-2600 (voice and TTY); or the Federal Relay Service 
at (800) 877-8339.
    To file a program discrimination complaint, a complainant should 
complete a Form AD-3027, USDA

[[Page 22333]]

Program Discrimination Complaint Form, which can be obtained online at 
https://www.usda.gov/forms/electronic-forms, from any USDA office, by 
calling (866) 632-9992, or by writing a letter addressed to USDA. The 
letter must contain the complainant's name, address, telephone number, 
and a written description of the alleged discriminatory action in 
sufficient detail to inform the Assistant Secretary for Civil Rights 
(ASCR) about the nature and date of an alleged civil rights violation. 
The completed AD-3027 form or letter must be submitted to USDA by:

(1) Mail: U.S. Department of Agriculture, Office of the Assistant 
Secretary for Civil Rights, 1400 Independence Avenue SW, Washington, DC 
20250-9410; or
(2) Fax: (833) 256-1665 or (202) 690-7442; or
(3) Email: [email protected]

    USDA is an equal opportunity provider, employer, and lender.

Paul Kiecker,
Administrator.
[FR Doc. 2024-06837 Filed 3-29-24; 8:45 am]
BILLING CODE 3410-DM-P


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.