Removals From the Unverified List, 4187-4188 [2024-01253]
Download as PDF
<![CDATA[
Federal Register / Vol. 89, No. 15 / Tuesday, January 23, 2024 / Rules and Regulations
(6) For stages 7–9 compressor rotor spools,
at the next piece part exposure or before
exceeding the cyclic removal thresholds
identified in Paragraph 4. APPENDIX—A,
Table 2 of GE90–100 SB 72–0914, whichever
occurs first.
For the purpose of this AD, a ‘‘part eligible
for installation’’ is any HPT stage 1 disk, HPT
stage 2 disk, stages 7–9 compressor rotor
spool, forward HPT rotor seal, or interstage
HPT seal with a part number and serial
number that is not identified in paragraph (c)
of this AD.
(1) The Manager, AIR–520 Continued
Operational Safety Branch, FAA, has the
authority to approve AMOCs for this AD, if
requested using the procedures found in 14
CFR 39.19. In accordance with 14 CFR 39.19,
send your request to your principal inspector
or local Flight Standards District Office, as
appropriate. If sending information directly
to the manager of AIR–520 Continued
Operational Safety Branch, send it to the
attention of the person identified in
paragraph (j) of this AD and email to: ANEAD-AMOC@faa.gov.
(2) Before using any approved AMOC,
notify your appropriate principal inspector,
or lacking a principal inspector, the manager
of the local Flight Standards District Office/
certificate holding district office.
(j) Additional Information
For more information about this AD,
contact Alexei Marqueen, Aviation Safety
Engineer, FAA, 2200 South 216th Street, Des
Moines, WA 98198; phone: (781) 238–7178;
email: Alexei.T.Marqueen@faa.gov.
(k) Material Incorporated by Reference
(1) The Director of the Federal Register
approved the incorporation by reference
(IBR) of the service information listed in this
paragraph under 5 U.S.C. 552(a) and 1 CFR
part 51.
(2) You must use this service information
as applicable to do the actions required by
this AD, unless the AD specifies otherwise.
(i) General Electric GE90–100 Service
Bulletin 72–0914, dated January 25, 2023.
(ii) [Reserved]
(3) For service information identified in
this AD, contact General Electric Company,
1 Neumann Way, Cincinnati, OH 45215;
phone: (513) 552–3272; email:
aviation.fleetsupport@ge.com; website:
ge.com.
(4) You may view this service information
at FAA, Airworthiness Products Section,
Operational Safety Branch, 1200 District
Avenue, Burlington, MA 01803. For
information on the availability of this
material at the FAA, call (817) 222–5110.
(5) You may view this service information
that is incorporated by reference at the
National Archives and Records
Administration (NARA). For information on
the availability of this material at NARA,
visit: www.archives.gov/federal-register/cfr/
ibr-locations or email: fr.inspection@
nara.gov.
16:06 Jan 22, 2024
Jkt 262001
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
15 CFR Part 744
[Docket No. 240117–0016]
(i) Alternative Methods of Compliance
(AMOCs)
khammond on DSKJM1Z7X2PROD with RULES
[FR Doc. 2024–01166 Filed 1–22–24; 8:45 am]
BILLING CODE 4910–13–P
(h) Definition
VerDate Sep<11>2014
Issued on January 2, 2024.
Caitlin Locke,
Director, Compliance & Airworthiness
Division, Aircraft Certification Service.
RIN 0694–AJ52
Removals From the Unverified List
Bureau of Industry and
Security, Department of Commerce.
ACTION: Final rule.
AGENCY:
The Bureau of Industry and
Security (BIS) is amending the Export
Administration Regulations (EAR) by
removing three persons, including one
under the destination of Canada, one
under the destination of People’s
Republic of China (China), and one
under the destination of the United
Arab Emirates, from the Unverified List
(UVL) because BIS was able to verify
their bona fides.
DATES: This rule is effective on January
19, 2024.
FOR FURTHER INFORMATION CONTACT:
Kevin J. Kurland, Deputy Assistant
Secretary for Export Enforcement,
Phone: (202) 482–4255 or by email at
UVLRequest@bis.doc.gov.
SUPPLEMENTARY INFORMATION:
SUMMARY:
Background
The UVL, found in supplement no. 6
to part 744 of the EAR (15 CFR parts
730–774), contains the names and
addresses of foreign persons who are or
have been parties to a transaction, as
described in § 748.5 of the EAR,
involving the export, reexport, or
transfer (in-country) of items subject to
the EAR. These foreign persons are
added to the UVL because BIS or federal
officials acting on BIS’s behalf were
unable to verify their bona fides (i.e.,
legitimacy and reliability relating to the
end-use and end user of items subject to
the EAR) through an end-use check.
These checks, such as a pre-license
check (PLC) or a post-shipment
verification (PSV), cannot be completed
satisfactorily for reasons outside the
U.S. Government’s control.
As set forth in the EAR, there are any
number of reasons why these checks
cannot be completed to the satisfaction
of the U.S. Government. Section
PO 00000
Frm 00023
Fmt 4700
Sfmt 4700
4187
744.15(c)(1) of the EAR provides
illustrative examples of those
circumstances, including reasons
unrelated to the cooperation of the
foreign party subject to the end-use
check. Such examples include: (i)
During the conduct of an end-use check,
the subject of the check is unable to
demonstrate the disposition of items
subject to the EAR; (ii) The existence or
authenticity of the subject of an end-use
check cannot be verified (e.g., the
subject of the check cannot be located
or contacted); (iii) Lack of cooperation
by the host government authority
prevents an end-use check from being
conducted.
BIS’s inability to confirm the bona
fides of foreign persons subject to enduse checks raises concerns about the
suitability of such persons as
participants in future exports, reexports,
or transfers (in-country) of items subject
to the EAR; it also indicates a risk that
such items may be diverted to
prohibited end-uses and/or end-users.
Under such circumstances, there may
not be sufficient information to add the
foreign person at issue to the Entity List
under § 744.11 of the EAR. Therefore,
BIS may add the foreign person to the
UVL.
As provided in § 740.2(a)(17) of the
EAR, the use of license exceptions for
exports, reexports, and transfers (incountry) involving a party or parties to
the transaction who are listed on the
UVL is suspended. Additionally, under
§ 744.15(b) of the EAR, there is a
requirement for exporters, reexporters,
and transferors to obtain (and maintain
a record of) a UVL statement from a
party or parties to the transaction who
are listed on the UVL before proceeding
with exports, reexports, and transfers
(in-country) to such persons, when the
exports, reexports and transfers (incountry) are not subject to a license
requirement. Finally, pursuant to
§ 758.1(b)(8), Electronic Export
Information (EEI) must be filed in the
Automated Export System (AES) for all
exports of tangible items subject to the
EAR where any party to the transaction,
as described in § 748.5(d) through (f), is
listed on the UVL.
Requests for the removal of a UVL
entry must be made in accordance with
§ 744.15(d) of the EAR. Decisions
regarding the removal or modification of
a UVL entry will be made by the Deputy
Assistant Secretary for Export
Enforcement, based on a demonstration
by the listed person of their bona fides.
Removals From the UVL
This final rule removes three persons
from the UVL because BIS was able to
verify their bona fides. This rule
E:\FR\FM\23JAR1.SGM
23JAR1
4188
Federal Register / Vol. 89, No. 15 / Tuesday, January 23, 2024 / Rules and Regulations
removes ‘‘Skymount Drones’’ under the
destination of Canada, ‘‘Plexus (Xiamen)
Co., Ltd.,’’ under the destination of
China, and ‘‘Delma Industrial Supply &
Marine Services’’ under the destination
of the United Arab Emirates. BIS is
removing these three persons pursuant
to § 744.15(c)(2) of the EAR.
Rulemaking Requirements
khammond on DSKJM1Z7X2PROD with RULES
Executive Order Requirements
Executive Orders 13563 and 12866
direct agencies to assess all costs and
benefits of available regulatory
alternatives and, if regulation is
necessary, to select regulatory
approaches that maximize net benefits
(including potential economic,
environmental, public health and safety
effects, distribute impacts, and equity).
Executive Order 13563 emphasizes the
importance of quantifying both costs
and benefits, of reducing costs, of
harmonizing rules, and of promoting
flexibility. This final rule has been
deemed not significant for purposes of
Executive Order 12866.
This rule does not contain policies
with Federalism implications as that
term is defined under Executive Order
13132.
Paperwork Reduction Act
Requirements
Notwithstanding any other provision
of law, no person is required to respond
to, nor is subject to a penalty for failure
to comply with, a collection of
information, subject to the requirements
of the Paperwork Reduction Act of 1995
(44 U.S.C. 3501 et seq.) (PRA), unless
that collection of information displays a
currently valid Office of Management
and Budget (OMB) Control Number.
The UVL additions contain
collections of information approved by
OMB under the following control
numbers:
• OMB Control Number 0694–0088—
Simple Network Application Process
and Multipurpose Application Form
• OMB Control Number 0694–0122—
Miscellaneous Licensing
Responsibilities and Enforcement
• OMB Control Number 0694–0134—
Entity List and Unverified List
Requests,
• OMB Control Number 0694–0137—
License Exemptions and Exclusions.
BIS believes that the overall increases
in burdens and costs will be minimal
and will fall within the already
approved amounts for these existing
collections. Additional information
regarding these collections of
information—including all background
materials—can be found at https://
www.reginfo.gov/public/do/PRAMain by
VerDate Sep<11>2014
16:06 Jan 22, 2024
Jkt 262001
using the search function to enter either
the title of the collection or the OMB
Control Number.
Administrative Procedure Act and
Regulatory Flexibility Act
Requirements
Pursuant to Section 1762 of ECRA (50
U.S.C. 4821), this action is exempt from
the Administrative Procedure Act (5
U.S.C. 553) requirements for notice of
proposed rulemaking and opportunity
for public participation.
Further, no other law requires notice
of proposed rulemaking or opportunity
for public comment for this final rule.
Because a notice of proposed
rulemaking and an opportunity for
public comment are not required under
the Administrative Procedure Act or by
any other law, the analytical
requirements of the Regulatory
Flexibility Act (5 U.S.C. 601 et seq.) are
not applicable.
List of Subjects in 15 CFR Part 744
Exports, Reporting and recordkeeping
requirements, Terrorism.
Accordingly, part 744 of the Export
Administration Regulations (15 CFR
parts 730 through 774) is amended as
follows:
PART 744—END-USE AND END-USER
CONTROLS
1. The authority citation for 15 CFR
part 744 continues to read as follows:
■
Authority: 50 U.S.C. 4801–4852; 50 U.S.C.
4601 et seq.; 50 U.S.C. 1701 et seq.; 22 U.S.C.
3201 et seq.; 42 U.S.C. 2139a; 22 U.S.C. 7201
et seq.; 22 U.S.C. 7210; E.O. 12058, 43 FR
20947, 3 CFR, 1978 Comp., p. 179; E.O.
12851, 58 FR 33181, 3 CFR, 1993 Comp., p.
608; E.O. 12938, 59 FR 59099, 3 CFR, 1994
Comp., p. 950; E.O. 13026, 61 FR 58767, 3
CFR, 1996 Comp., p. 228; E.O. 13099, 63 FR
45167, 3 CFR, 1998 Comp., p. 208; E.O.
13222, 66 FR 44025, 3 CFR, 2001 Comp., p.
783; E.O. 13224, 66 FR 49079, 3 CFR, 2001
Comp., p. 786; Notice of November 8, 2022,
87 FR 68015, 3 CFR, 2022 Comp., p. 563;
Notice of September 7, 2023, 88 FR 62439
(September 11, 2023).
2. Supplement No. 6 to Part 744 is
amended:
■ a. Under CANADA by removing the
entry for ‘‘Skymount Drones,’’
■ b. Under CHINA, PEOPLE’S
REPUBLIC OF, by removing the entry
for ‘‘Plexus (Xiamen) Co., Ltd.,’’ and
■ c. Under UNITED ARAB EMIRATES
by removing the entry for ‘‘Delma
Industrial Supply & Marine Services.’’
■
Thea D. Rozman Kendler,
Assistant Secretary for Export
Administration.
[FR Doc. 2024–01253 Filed 1–19–24; 8:45 am]
BILLING CODE 3510–33–P
PO 00000
Frm 00024
Fmt 4700
Sfmt 4700
CONSUMER PRODUCT SAFETY
COMMISSION
16 CFR Part 1420
[CPSC Docket No. 2017–0032]
Standard for All-Terrain Vehicles
Consumer Product Safety
Commission.
ACTION: Final rule.
AGENCY:
The Consumer Product Safety
Act (CPSA), as amended by the
Consumer Product Safety Improvement
Act of 2008 (CPSIA), required the
Consumer Product Safety Commission
(CPSC or the Commission) to publish, as
a mandatory consumer product safety
standard, the American National
Standard for Four-Wheel All-Terrain
Vehicles (ATVs) developed by the
Specialty Vehicle Institute of America
(ANSI/SVIA 1–2007). CPSC published
that mandatory consumer product safety
standard in November 2008. In March
2023, ANSI/SVIA issued a 2023 edition
of its standard. In accordance with the
CPSA, CPSC is issuing this final rule to
amend the Commission’s mandatory
ATV standard to reference the 2023
edition of the ANSI/SVIA 1 standard.
DATES: This rule is effective on January
1, 2025. The incorporation by reference
of the publication listed in this rule is
approved by the Director of the Federal
Register as of January 1, 2025.
FOR FURTHER INFORMATION CONTACT:
William Cusey, Small Business
Ombudsman, U.S. Consumer Product
Safety Commission, 4330 East West
Highway, Bethesda, Maryland 20814;
telephone: 301–504–7833; email:
wcusey@cpsc.gov.
SUPPLEMENTARY INFORMATION:
SUMMARY:
I. Background and Statutory Authority
Section 42 of the CPSA, as amended
by section 232 of the CPSIA, directed
the Commission to ‘‘publish in the
Federal Register as a mandatory
consumer product safety standard the
American National Standard for FourWheel All-Terrain Vehicles Equipment
Configuration, and Performance
Requirements developed by the
Specialty Vehicle Institute of America
(American National Standard ANSI/
SVIA 1–2007).’’ 15 U.S.C. 2089(a)(1).
Accordingly, on November 14, 2008,
CPSC published a final rule, codified at
16 CFR part 1420, establishing ANSI/
SVIA 1–2007 as a mandatory consumer
product safety standard. 73 FR 67385.
Section 42(b) of the CPSA provides
that if ANSI/SVIA 1–2007 is revised
after the Commission has published a
Federal Register notice mandating the
E:\FR\FM\23JAR1.SGM
23JAR1
]]>Agencies
[Federal Register Volume 89, Number 15 (Tuesday, January 23, 2024)]
[Rules and Regulations]
[Pages 4187-4188]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2024-01253]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
15 CFR Part 744
[Docket No. 240117-0016]
RIN 0694-AJ52
Removals From the Unverified List
AGENCY: Bureau of Industry and Security, Department of Commerce.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: The Bureau of Industry and Security (BIS) is amending the
Export Administration Regulations (EAR) by removing three persons,
including one under the destination of Canada, one under the
destination of People's Republic of China (China), and one under the
destination of the United Arab Emirates, from the Unverified List (UVL)
because BIS was able to verify their bona fides.
DATES: This rule is effective on January 19, 2024.
FOR FURTHER INFORMATION CONTACT: Kevin J. Kurland, Deputy Assistant
Secretary for Export Enforcement, Phone: (202) 482-4255 or by email at
[email protected].
SUPPLEMENTARY INFORMATION:
Background
The UVL, found in supplement no. 6 to part 744 of the EAR (15 CFR
parts 730-774), contains the names and addresses of foreign persons who
are or have been parties to a transaction, as described in Sec. 748.5
of the EAR, involving the export, reexport, or transfer (in-country) of
items subject to the EAR. These foreign persons are added to the UVL
because BIS or federal officials acting on BIS's behalf were unable to
verify their bona fides (i.e., legitimacy and reliability relating to
the end-use and end user of items subject to the EAR) through an end-
use check. These checks, such as a pre-license check (PLC) or a post-
shipment verification (PSV), cannot be completed satisfactorily for
reasons outside the U.S. Government's control.
As set forth in the EAR, there are any number of reasons why these
checks cannot be completed to the satisfaction of the U.S. Government.
Section 744.15(c)(1) of the EAR provides illustrative examples of those
circumstances, including reasons unrelated to the cooperation of the
foreign party subject to the end-use check. Such examples include: (i)
During the conduct of an end-use check, the subject of the check is
unable to demonstrate the disposition of items subject to the EAR; (ii)
The existence or authenticity of the subject of an end-use check cannot
be verified (e.g., the subject of the check cannot be located or
contacted); (iii) Lack of cooperation by the host government authority
prevents an end-use check from being conducted.
BIS's inability to confirm the bona fides of foreign persons
subject to end-use checks raises concerns about the suitability of such
persons as participants in future exports, reexports, or transfers (in-
country) of items subject to the EAR; it also indicates a risk that
such items may be diverted to prohibited end-uses and/or end-users.
Under such circumstances, there may not be sufficient information to
add the foreign person at issue to the Entity List under Sec. 744.11
of the EAR. Therefore, BIS may add the foreign person to the UVL.
As provided in Sec. 740.2(a)(17) of the EAR, the use of license
exceptions for exports, reexports, and transfers (in-country) involving
a party or parties to the transaction who are listed on the UVL is
suspended. Additionally, under Sec. 744.15(b) of the EAR, there is a
requirement for exporters, reexporters, and transferors to obtain (and
maintain a record of) a UVL statement from a party or parties to the
transaction who are listed on the UVL before proceeding with exports,
reexports, and transfers (in-country) to such persons, when the
exports, reexports and transfers (in-country) are not subject to a
license requirement. Finally, pursuant to Sec. 758.1(b)(8), Electronic
Export Information (EEI) must be filed in the Automated Export System
(AES) for all exports of tangible items subject to the EAR where any
party to the transaction, as described in Sec. 748.5(d) through (f),
is listed on the UVL.
Requests for the removal of a UVL entry must be made in accordance
with Sec. 744.15(d) of the EAR. Decisions regarding the removal or
modification of a UVL entry will be made by the Deputy Assistant
Secretary for Export Enforcement, based on a demonstration by the
listed person of their bona fides.
Removals From the UVL
This final rule removes three persons from the UVL because BIS was
able to verify their bona fides. This rule
[[Page 4188]]
removes ``Skymount Drones'' under the destination of Canada, ``Plexus
(Xiamen) Co., Ltd.,'' under the destination of China, and ``Delma
Industrial Supply & Marine Services'' under the destination of the
United Arab Emirates. BIS is removing these three persons pursuant to
Sec. 744.15(c)(2) of the EAR.
Rulemaking Requirements
Executive Order Requirements
Executive Orders 13563 and 12866 direct agencies to assess all
costs and benefits of available regulatory alternatives and, if
regulation is necessary, to select regulatory approaches that maximize
net benefits (including potential economic, environmental, public
health and safety effects, distribute impacts, and equity). Executive
Order 13563 emphasizes the importance of quantifying both costs and
benefits, of reducing costs, of harmonizing rules, and of promoting
flexibility. This final rule has been deemed not significant for
purposes of Executive Order 12866.
This rule does not contain policies with Federalism implications as
that term is defined under Executive Order 13132.
Paperwork Reduction Act Requirements
Notwithstanding any other provision of law, no person is required
to respond to, nor is subject to a penalty for failure to comply with,
a collection of information, subject to the requirements of the
Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.) (PRA), unless
that collection of information displays a currently valid Office of
Management and Budget (OMB) Control Number.
The UVL additions contain collections of information approved by
OMB under the following control numbers:
OMB Control Number 0694-0088--Simple Network Application
Process and Multipurpose Application Form
OMB Control Number 0694-0122--Miscellaneous Licensing
Responsibilities and Enforcement
OMB Control Number 0694-0134--Entity List and Unverified List
Requests,
OMB Control Number 0694-0137--License Exemptions and
Exclusions.
BIS believes that the overall increases in burdens and costs will
be minimal and will fall within the already approved amounts for these
existing collections. Additional information regarding these
collections of information--including all background materials--can be
found at https://www.reginfo.gov/public/do/PRAMain by using the search
function to enter either the title of the collection or the OMB Control
Number.
Administrative Procedure Act and Regulatory Flexibility Act
Requirements
Pursuant to Section 1762 of ECRA (50 U.S.C. 4821), this action is
exempt from the Administrative Procedure Act (5 U.S.C. 553)
requirements for notice of proposed rulemaking and opportunity for
public participation.
Further, no other law requires notice of proposed rulemaking or
opportunity for public comment for this final rule. Because a notice of
proposed rulemaking and an opportunity for public comment are not
required under the Administrative Procedure Act or by any other law,
the analytical requirements of the Regulatory Flexibility Act (5 U.S.C.
601 et seq.) are not applicable.
List of Subjects in 15 CFR Part 744
Exports, Reporting and recordkeeping requirements, Terrorism.
Accordingly, part 744 of the Export Administration Regulations (15
CFR parts 730 through 774) is amended as follows:
PART 744--END-USE AND END-USER CONTROLS
0
1. The authority citation for 15 CFR part 744 continues to read as
follows:
Authority: 50 U.S.C. 4801-4852; 50 U.S.C. 4601 et seq.; 50
U.S.C. 1701 et seq.; 22 U.S.C. 3201 et seq.; 42 U.S.C. 2139a; 22
U.S.C. 7201 et seq.; 22 U.S.C. 7210; E.O. 12058, 43 FR 20947, 3 CFR,
1978 Comp., p. 179; E.O. 12851, 58 FR 33181, 3 CFR, 1993 Comp., p.
608; E.O. 12938, 59 FR 59099, 3 CFR, 1994 Comp., p. 950; E.O. 13026,
61 FR 58767, 3 CFR, 1996 Comp., p. 228; E.O. 13099, 63 FR 45167, 3
CFR, 1998 Comp., p. 208; E.O. 13222, 66 FR 44025, 3 CFR, 2001 Comp.,
p. 783; E.O. 13224, 66 FR 49079, 3 CFR, 2001 Comp., p. 786; Notice
of November 8, 2022, 87 FR 68015, 3 CFR, 2022 Comp., p. 563; Notice
of September 7, 2023, 88 FR 62439 (September 11, 2023).
0
2. Supplement No. 6 to Part 744 is amended:
0
a. Under CANADA by removing the entry for ``Skymount Drones,''
0
b. Under CHINA, PEOPLE'S REPUBLIC OF, by removing the entry for
``Plexus (Xiamen) Co., Ltd.,'' and
0
c. Under UNITED ARAB EMIRATES by removing the entry for ``Delma
Industrial Supply & Marine Services.''
Thea D. Rozman Kendler,
Assistant Secretary for Export Administration.
[FR Doc. 2024-01253 Filed 1-19-24; 8:45 am]
BILLING CODE 3510-33-P
