Accreditation and Approval of Intertek USA, Inc. (Texas City, TX) as a Commercial Gauger and Laboratory, 66878-66879 [2023-21220]
Download as PDF
<![CDATA[
66878
Federal Register / Vol. 88, No. 187 / Thursday, September 28, 2023 / Notices
API chapters
9 ...................
12 .................
17 .................
Saybolt LP (Wilmington, NC) is
accredited for the following laboratory
analysis procedures and methods for
petroleum and certain petroleum
products set forth by the U.S. Customs
Title
Density Determination.
Calculations.
Marine Measurement.
CBPL No.
ASTM
27–02 .................
D1298
27–06 .................
27–08 .................
27–11 .................
D473
D86
D445
27–48 .................
27–54 .................
N/A .....................
D4052
D1796
D5453
Title
Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum
Products by Hydrometer Method.
Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method.
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure.
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic
Viscosity).
Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter.
Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure).
Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel
Engine Fuel, and Engine Oil by Ultraviolet Fluorescence.
Anyone wishing to employ this entity
to conduct laboratory analyses and
gauger services should request and
receive written assurances from the
entity that it is accredited or approved
by the U.S. Customs and Border
Protection to conduct the specific test or
gauger service requested. Alternatively,
inquiries regarding the specific test or
gauger service this entity is accredited
or approved to perform may be directed
to the U.S. Customs and Border
Protection by calling (202) 344–1060.
The inquiry may also be sent to
CBPGaugersLabs@cbp.dhs.gov. Please
reference the website listed below for a
complete listing of CBP approved
gaugers and accredited laboratories.
https://www.cbp.gov/about/labsscientific/commercial-gaugers-andlaboratories.
James D. Sweet,
Laboratory Director, Houston, Laboratories
and Scientific Services Directorate.
[FR Doc. 2023–21218 Filed 9–27–23; 8:45 am]
BILLING CODE 9111–14–P
ddrumheller on DSK120RN23PROD with NOTICES1
CBPL No.
D287
D1298
27–03 .................
27–04 .................
27–05 .................
D4006
D95
D4928
U.S. Customs and Border Protection
Accreditation and Approval of Intertek
USA, Inc. (Texas City, TX) as a
Commercial Gauger and Laboratory
U.S. Customs and Border
Protection, Department of Homeland
Security.
ACTION: Notice of accreditation and
approval of Intertek USA, Inc. (Texas
City, TX) as a commercial gauger and
laboratory.
AGENCY:
Notice is hereby given,
pursuant to CBP regulations, that
Intertek USA, Inc. (Texas City, TX), has
been approved to gauge petroleum and
certain petroleum products and
accredited to test petroleum and certain
petroleum products for customs
purposes for the next four years as of
August 4, 2022.
DATES: Intertek USA, Inc. (Texas City,
TX) was approved and accredited as a
commercial gauger and laboratory as of
August 4, 2022. The next inspection
date will be scheduled for August 2026.
FOR FURTHER INFORMATION CONTACT: Dr.
Eugene Bondoc, Laboratories and
Scientific Services Directorate, U.S.
Customs and Border Protection, 1300
Pennsylvania Avenue NW, Suite 1501–
SUMMARY:
A North, Washington, DC 20229, tel.
202–344–1060.
SUPPLEMENTARY INFORMATION: Notice is
hereby given pursuant to 19 CFR 151.12
and 19 CFR 151.13, that Intertek USA,
Inc., 728 4th Avenue South, Texas City,
TX 77590, has been approved to gauge
petroleum and certain petroleum
products and accredited to test
petroleum and certain petroleum
products for customs purposes, in
accordance with the provisions of 19
CFR 151.12 and 19 CFR 151.13 as of
August 4, 2022.1
Intertek USA, Inc. (Texas City, TX) is
approved for the following gauging
procedures for petroleum and certain
petroleum products from the American
Petroleum Institute (API):
API chapters
3 ...................
7 ...................
8 ...................
12 .................
17 .................
Title
Tank Gauging.
Temperature Determination.
Sampling.
Calculations.
Maritime Measurement.
Intertek USA, Inc. (Texas City, TX) is
accredited for the following laboratory
analysis procedures and methods for
petroleum and certain petroleum
products set forth by the U.S. Customs
and Border Protection Laboratory
Methods (CBPL) and American Society
for Testing and Materials (ASTM):
Title
Standard Test
Standard Test
Products by
Standard Test
Standard Test
Standard Test
Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method).
Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum
Hydrometer Method.
Method for Water in Crude Oil by Distillation.
Method for Water in Petroleum Products and Bituminous Materials by Distillation.
Method for Water in Crude Oils by Coulometric Karl Fischer Titration.
1 As a result of the SARS–CoV–2 (COVID–19)
pandemic, Laboratories and Scientific Services
implemented a one-time quadrennial timeframe for
reoccurring audits originally scheduled to take
place in 2020, 2021, and 2022. This postponed the
VerDate Sep<11>2014
DEPARTMENT OF HOMELAND
SECURITY
ASTM
27–01 .................
27–02 .................
and Border Protection Laboratory
Methods (CBPL) and American Society
for Testing and Materials (ASTM):
18:09 Sep 27, 2023
Jkt 259001
scheduled deadline for audits and the payment of
reaccreditation or reapproval fees by one year, after
which audits will return to a triennial schedule. See
19 U.S.C. 1499; Presidential Proclamation 9994, 85
FR 15337 (March 13, 2020); Executive Order 13924,
PO 00000
Frm 00083
Fmt 4703
Sfmt 4703
85 FR 31353 (May 19, 2020); and U.S. Customs &
Border Protection, COVID–19 Laboratory and
Gauger Postponement Letter (May 26, 2021),
https://www.cbp.gov/document/guidance/covid-19gauger-postponement-letter.
E:\FR\FM\28SEN1.SGM
28SEN1
66879
Federal Register / Vol. 88, No. 187 / Thursday, September 28, 2023 / Notices
CBPL No.
27–06
27–07
27–08
27–11
ASTM
.................
.................
.................
.................
D473
D4807
D86
D445
27–13 .................
D4294
27–46 .................
27–48 .................
27–50 .................
27–53 .................
27–54 .................
N/A .....................
N/A .....................
N/A .....................
D5002
D4052
D93
D2709
D1796
D70
D97
D4007
Title
Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method.
Standard Test Method for Sediment in Crude Oil by Membrane Filtration.
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure.
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic
Viscosity).
Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-ray Fluorescence
Spectrometry.
Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer.
Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter.
Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester.
Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge.
Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure).
Standard Test Method for Specific Gravity and Density of Semi-Solid Asphalt Binder (Pycnometer method).
Standard Test Method for Pour Point of Petroleum Products.
Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure).
Anyone wishing to employ this entity
to conduct laboratory analyses and
gauger services should request and
receive written assurances from the
entity that it is accredited or approved
by the U.S. Customs and Border
Protection to conduct the specific test or
gauger service requested. Alternatively,
inquiries regarding the specific test or
gauger service this entity is accredited
or approved to perform may be directed
to the U.S. Customs and Border
Protection by calling (202) 344–1060.
The inquiry may also be sent to
CBPGaugersLabs@cbp.dhs.gov. Please
reference the website listed below for a
complete listing of CBP approved
gaugers and accredited laboratories.
https://www.cbp.gov/about/labsscientific/commercial-gaugers-andlaboratories.
James D. Sweet,
Laboratory Director, Houston, Laboratories
and Scientific Services Directorate.
[FR Doc. 2023–21220 Filed 9–27–23; 8:45 am]
BILLING CODE 9111–14–P
ddrumheller on DSK120RN23PROD with NOTICES1
CBPL No.
27–01
27–04
27–06
27–07
27–08
U.S. Customs and Border Protection
Accreditation and Approval of Intertek
USA, Inc. (Carteret, NJ) as a
Commercial Gauger and Laboratory
U.S. Customs and Border
Protection, Department of Homeland
Security.
ACTION: Notice of accreditation and
approval of Intertek USA, Inc. (Carteret,
NJ) as a commercial gauger and
laboratory.
AGENCY:
Notice is hereby given,
pursuant to CBP regulations, that
Intertek USA, Inc. (Carteret, NJ), has
been approved to gauge petroleum and
certain petroleum products and
accredited to test petroleum and certain
petroleum products for customs
purposes for the next four years as of
July 18, 2022.
DATES: Intertek USA, Inc. (Carteret, NJ)
was approved and accredited as a
commercial gauger and laboratory as of
July 18, 2022. The next inspection date
will be scheduled for July 2026.
FOR FURTHER INFORMATION CONTACT: Dr.
Eugene Bondoc, Laboratories and
Scientific Services Directorate, U.S.
Customs and Border Protection, 1300
Pennsylvania Avenue NW, Suite 1501–
SUMMARY:
ASTM
.................
.................
.................
.................
.................
D287
D95
D473
D4807
D86
A North, Washington, DC 20229, tel.
202–344–1060.
SUPPLEMENTARY INFORMATION: Notice is
hereby given pursuant to 19 CFR 151.12
and 19 CFR 151.13, that Intertek USA,
Inc., 1000 Port Carteret Dr., Suite C,
Carteret, NJ 07008, has been approved to
gauge petroleum and certain petroleum
products and accredited to test
petroleum and certain petroleum
products for customs purposes, in
accordance with the provisions of 19
CFR 151.12 and 19 CFR 151.13 as of
July 18, 2022.1
Intertek USA, Inc. (Carteret, NJ) is
approved for the following gauging
procedures for petroleum and certain
petroleum products from the American
Petroleum Institute (API):
API chapters
1 ...................
3 ...................
7 ...................
8 ...................
12 .................
17 .................
Title
Vocabulary.
Tank Gauging.
Temperature Determination.
Sampling.
Calculations.
Maritime Measurement.
Intertek USA, Inc. (Carteret, NJ) is
accredited for the following laboratory
analysis procedures and methods for
petroleum and certain petroleum
products set forth by the U.S. Customs
and Border Protection Laboratory
Methods (CBPL) and American Society
for Testing and Materials (ASTM):
Title
Standard
Standard
Standard
Standard
Standard
Test
Test
Test
Test
Test
Method
Method
Method
Method
Method
1 As a result of the SARS-CoV–2 (COVID–19)
pandemic, Laboratories and Scientific Services
implemented a one-time quadrennial timeframe for
reoccurring audits originally scheduled to take
place in 2020, 2021, and 2022. This postponed the
VerDate Sep<11>2014
DEPARTMENT OF HOMELAND
SECURITY
18:09 Sep 27, 2023
Jkt 259001
for
for
for
for
for
API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method).
Water in Petroleum Products and Bituminous Materials by Distillation.
Sediment in Crude Oils and Fuel Oils by the Extraction Method.
Sediment in Crude Oil by Membrane Filtration.
Distillation of Petroleum Products at Atmospheric Pressure.
scheduled deadline for audits and the payment of
reaccreditation or reapproval fees by one year, after
which audits will return to a triennial schedule. See
19 U.S.C. 1499; Presidential Proclamation 9994, 85
FR 15337 (March 13, 2020); Executive Order 13924,
PO 00000
Frm 00084
Fmt 4703
Sfmt 4703
85 FR 31353 (May 19, 2020); and U.S. Customs &
Border Protection, COVID–19 Laboratory and
Gauger Postponement Letter (May 26, 2021),
https://www.cbp.gov/document/guidance/covid-19gauger-postponement-letter.
E:\FR\FM\28SEN1.SGM
28SEN1
]]>Agencies
[Federal Register Volume 88, Number 187 (Thursday, September 28, 2023)]
[Notices]
[Pages 66878-66879]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2023-21220]
-----------------------------------------------------------------------
DEPARTMENT OF HOMELAND SECURITY
U.S. Customs and Border Protection
Accreditation and Approval of Intertek USA, Inc. (Texas City, TX)
as a Commercial Gauger and Laboratory
AGENCY: U.S. Customs and Border Protection, Department of Homeland
Security.
ACTION: Notice of accreditation and approval of Intertek USA, Inc.
(Texas City, TX) as a commercial gauger and laboratory.
-----------------------------------------------------------------------
SUMMARY: Notice is hereby given, pursuant to CBP regulations, that
Intertek USA, Inc. (Texas City, TX), has been approved to gauge
petroleum and certain petroleum products and accredited to test
petroleum and certain petroleum products for customs purposes for the
next four years as of August 4, 2022.
DATES: Intertek USA, Inc. (Texas City, TX) was approved and accredited
as a commercial gauger and laboratory as of August 4, 2022. The next
inspection date will be scheduled for August 2026.
FOR FURTHER INFORMATION CONTACT: Dr. Eugene Bondoc, Laboratories and
Scientific Services Directorate, U.S. Customs and Border Protection,
1300 Pennsylvania Avenue NW, Suite 1501-A North, Washington, DC 20229,
tel. 202-344-1060.
SUPPLEMENTARY INFORMATION: Notice is hereby given pursuant to 19 CFR
151.12 and 19 CFR 151.13, that Intertek USA, Inc., 728 4th Avenue
South, Texas City, TX 77590, has been approved to gauge petroleum and
certain petroleum products and accredited to test petroleum and certain
petroleum products for customs purposes, in accordance with the
provisions of 19 CFR 151.12 and 19 CFR 151.13 as of August 4, 2022.\1\
---------------------------------------------------------------------------
\1\ As a result of the SARS-CoV-2 (COVID-19) pandemic,
Laboratories and Scientific Services implemented a one-time
quadrennial timeframe for reoccurring audits originally scheduled to
take place in 2020, 2021, and 2022. This postponed the scheduled
deadline for audits and the payment of reaccreditation or reapproval
fees by one year, after which audits will return to a triennial
schedule. See 19 U.S.C. 1499; Presidential Proclamation 9994, 85 FR
15337 (March 13, 2020); Executive Order 13924, 85 FR 31353 (May 19,
2020); and U.S. Customs & Border Protection, COVID-19 Laboratory and
Gauger Postponement Letter (May 26, 2021), https://www.cbp.gov/document/guidance/covid-19-gauger-postponement-letter.
---------------------------------------------------------------------------
Intertek USA, Inc. (Texas City, TX) is approved for the following
gauging procedures for petroleum and certain petroleum products from
the American Petroleum Institute (API):
------------------------------------------------------------------------
API chapters Title
------------------------------------------------------------------------
3................................... Tank Gauging.
7................................... Temperature Determination.
8................................... Sampling.
12.................................. Calculations.
17.................................. Maritime Measurement.
------------------------------------------------------------------------
Intertek USA, Inc. (Texas City, TX) is accredited for the following
laboratory analysis procedures and methods for petroleum and certain
petroleum products set forth by the U.S. Customs and Border Protection
Laboratory Methods (CBPL) and American Society for Testing and
Materials (ASTM):
------------------------------------------------------------------------
CBPL No. ASTM Title
------------------------------------------------------------------------
27-01.................. D287 Standard Test Method for API
Gravity of Crude Petroleum and
Petroleum Products (Hydrometer
Method).
27-02.................. D1298 Standard Test Method for
Density, Relative Density, or
API Gravity of Crude Petroleum
and Liquid Petroleum Products
by Hydrometer Method.
27-03.................. D4006 Standard Test Method for Water
in Crude Oil by Distillation.
27-04.................. D95 Standard Test Method for Water
in Petroleum Products and
Bituminous Materials by
Distillation.
27-05.................. D4928 Standard Test Method for Water
in Crude Oils by Coulometric
Karl Fischer Titration.
[[Page 66879]]
27-06.................. D473 Standard Test Method for
Sediment in Crude Oils and Fuel
Oils by the Extraction Method.
27-07.................. D4807 Standard Test Method for
Sediment in Crude Oil by
Membrane Filtration.
27-08.................. D86 Standard Test Method for
Distillation of Petroleum
Products at Atmospheric
Pressure.
27-11.................. D445 Standard Test Method for
Kinematic Viscosity of
Transparent and Opaque Liquids
(and Calculation of Dynamic
Viscosity).
27-13.................. D4294 Standard Test Method for Sulfur
in Petroleum and Petroleum
Products by Energy-Dispersive X-
ray Fluorescence Spectrometry.
27-46.................. D5002 Standard Test Method for
Density, Relative Density, and
API Gravity of Crude Oils by
Digital Density Analyzer.
27-48.................. D4052 Standard Test Method for Density
and Relative Density of Liquids
by Digital Density Meter.
27-50.................. D93 Standard Test Methods for Flash-
Point by Pensky-Martens Closed
Cup Tester.
27-53.................. D2709 Standard Test Method for Water
and Sediment in Middle
Distillate Fuels by Centrifuge.
27-54.................. D1796 Standard Test Method for Water
and Sediment in Fuel Oils by
the Centrifuge Method
(Laboratory Procedure).
N/A.................... D70 Standard Test Method for
Specific Gravity and Density of
Semi-Solid Asphalt Binder
(Pycnometer method).
N/A.................... D97 Standard Test Method for Pour
Point of Petroleum Products.
N/A.................... D4007 Standard Test Method for Water
and Sediment in Crude Oil by
the Centrifuge Method
(Laboratory Procedure).
------------------------------------------------------------------------
Anyone wishing to employ this entity to conduct laboratory analyses
and gauger services should request and receive written assurances from
the entity that it is accredited or approved by the U.S. Customs and
Border Protection to conduct the specific test or gauger service
requested. Alternatively, inquiries regarding the specific test or
gauger service this entity is accredited or approved to perform may be
directed to the U.S. Customs and Border Protection by calling (202)
344-1060. The inquiry may also be sent to [email protected].
Please reference the website listed below for a complete listing of CBP
approved gaugers and accredited laboratories. https://www.cbp.gov/about/labs-scientific/commercial-gaugers-and-laboratories.
James D. Sweet,
Laboratory Director, Houston, Laboratories and Scientific Services
Directorate.
[FR Doc. 2023-21220 Filed 9-27-23; 8:45 am]
BILLING CODE 9111-14-P
