Accreditation and Approval of Saybolt LP (Deer Park, TX) as a Commercial Gauger and Laboratory, 66881-66882 [2023-21217]
Download as PDF
66881
Federal Register / Vol. 88, No. 187 / Thursday, September 28, 2023 / Notices
CBPL No.
27–04
27–06
27–08
27–11
ASTM
.................
.................
.................
.................
D95
D473
D86
D445
27–13 .................
D4294
27–14 .................
D2622
27–48 .................
27–53 .................
27–58 .................
D4052
D2709
D5191
Title
Standard Test Method
Standard Test Method
Standard Test Method
Standard Test Method
Viscosity).
Standard Test Method
Spectrometry.
Standard Test Method
etry.
Standard Test Method
Standard Test Method
Standard Test Method
Anyone wishing to employ this entity
to conduct laboratory analyses and
gauger services should request and
receive written assurances from the
entity that it is accredited or approved
by the U.S. Customs and Border
Protection to conduct the specific test or
gauger service requested. Alternatively,
inquiries regarding the specific test or
gauger service this entity is accredited
or approved to perform may be directed
to the U.S. Customs and Border
Protection by calling (202) 344–1060.
The inquiry may also be sent to
CBPGaugersLabs@cbp.dhs.gov. Please
reference the website listed below for a
complete listing of CBP approved
gaugers and accredited laboratories.
https://www.cbp.gov/about/labsscientific/commercial-gaugers-andlaboratories.
James D. Sweet,
Laboratory Director, Houston, Laboratories
and Scientific Services Directorate.
[FR Doc. 2023–21203 Filed 9–27–23; 8:45 am]
BILLING CODE 9111–14–P
ddrumheller on DSK120RN23PROD with NOTICES1
CBPL No.
Water in Petroleum Products and Bituminous Materials by Distillation.
Sediment in Crude Oils and Fuel Oils by the Extraction Method.
Distillation of Petroleum Products at Atmospheric Pressure.
Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic
for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-ray Fluorescence
for Sulfur in Petroleum Products by Wavelength Dispersive X-Ray Fluorescence Spectromfor Density, Relative Density, and API Gravity of Liquids by Digital Density Meter.
for Water and Sediment in Middle Distillate Fuels by Centrifuge.
for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method).
DEPARTMENT OF HOMELAND
SECURITY
U.S. Customs and Border Protection
Accreditation and Approval of Saybolt
LP (Deer Park, TX) as a Commercial
Gauger and Laboratory
U.S. Customs and Border
Protection, Department of Homeland
Security.
ACTION: Notice of accreditation and
approval of Saybolt LP (Deer Park, TX),
as a commercial gauger and laboratory.
AGENCY:
Notice is hereby given,
pursuant to CBP regulations, that
Saybolt LP (Deer Park, TX), has been
approved to gauge petroleum and
certain petroleum products and
accredited to test petroleum and certain
petroleum products for customs
purposes for the next three years as of
August 18, 2022.
DATES: Saybolt LP (Deer Park, TX) was
approved and accredited as a
commercial gauger and laboratory as of
August 18, 2022. The next triennial
inspection date will be scheduled for
August 2025.
FOR FURTHER INFORMATION CONTACT: Mr.
Robert P. Munivez, Laboratories and
Scientific Services, U.S. Customs and
Border Protection, 4150 Interwood
SUMMARY:
ASTM
27–01 .................
27–02 .................
D287
D1298
27–03
27–04
27–05
27–06
27–07
27–08
27–11
.................
.................
.................
.................
.................
.................
.................
D4006
D95
D4928
D473
D4807
D86
D445
27–13 .................
D4294
27–14 .................
D2622
27–46 .................
D5002
VerDate Sep<11>2014
for
for
for
for
South Parkway, Houston, TX 77032, tel.
281–560–2937.
SUPPLEMENTARY INFORMATION: Notice is
hereby given pursuant to 19 CFR 151.12
and 19 CFR 151.13, that Saybolt LP, 201
Deerwood Glen Dr., Deer Park, TX
77536, has been approved to gauge
petroleum and certain petroleum
products and accredited to test
petroleum and certain petroleum
products for customs purposes, in
accordance with the provisions of 19
CFR 151.12 and 19 CFR 151.13.
Saybolt LP (Deer Park, TX) is
approved for the following gauging
procedures for petroleum and certain
petroleum products from the American
Petroleum Institute (API):
API chapters
3 ...................
5 ...................
7 ...................
8 ...................
12 .................
17 .................
Title
Tank Gauging.
Metering.
Temperature Determination.
Sampling.
Calculations.
Marine Measurement.
Saybolt LP (Deer Park, TX) is
accredited for the following laboratory
analysis procedures and methods for
petroleum and certain petroleum
products set forth by the U.S. Customs
and Border Protection Laboratory
Methods (CBPL) and American Society
for Testing and Materials (ASTM):
Title
Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method).
Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum
Products by Hydrometer Method.
Standard Test Method for Water in Crude Oil by Distillation.
Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation.
Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration.
Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method.
Standard Test Method for Sediment in Crude Oil by Membrane Filtration.
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure.
Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic
Viscosity).
Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-ray Fluorescence
Spectrometry.
Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-Ray Fluorescence Spectrometry.
Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer.
18:09 Sep 27, 2023
Jkt 259001
PO 00000
Frm 00086
Fmt 4703
Sfmt 4703
E:\FR\FM\28SEN1.SGM
28SEN1
66882
Federal Register / Vol. 88, No. 187 / Thursday, September 28, 2023 / Notices
CBPL No.
ASTM
27–48 .................
27–50 .................
D4052
D93
Title
Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter.
Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester.
Anyone wishing to employ this entity
to conduct laboratory analyses and
gauger services should request and
receive written assurances from the
entity that it is accredited or approved
by the U.S. Customs and Border
Protection to conduct the specific test or
gauger service requested. Alternatively,
inquiries regarding the specific test or
gauger service this entity is accredited
or approved to perform may be directed
to the U.S. Customs and Border
Protection by calling (202) 344–1060.
The inquiry may also be sent to
CBPGaugersLabs@cbp.dhs.gov. Please
reference the website listed below for a
complete listing of CBP approved
gaugers and accredited laboratories.
https://www.cbp.gov/about/labsscientific/commercial-gaugers-andlaboratories.
these parts in the NSPIRE final rule
until October 1, 2024.
FOR FURTHER INFORMATION CONTACT:
Dana M. Kitchen, Real Estate
Assessment Center, Office of Public and
Indian Housing, Department of Housing
and Urban Development, 550 12th
Street SW, Suite 100, Washington, DC
20410–4000; telephone 202–708–1112
(this is not a toll-free number),
NSPIREV_AlternateInspection@hud.gov.
HUD welcomes and is prepared to
receive calls from individuals who are
deaf or hard of hearing, as well as
individuals with speech or
communication disabilities. To learn
more about how to make an accessible
telephone call, please visit: https://
www.fcc.gov/consumers/guides/
telecommunications-relay-service-trs.
SUPPLEMENTARY INFORMATION:
James D. Sweet,
Laboratory Director, Houston, Laboratories
and Scientific Services Directorate.
I. Background
[FR Doc. 2023–21217 Filed 9–27–23; 8:45 am]
BILLING CODE 9111–14–P
DEPARTMENT OF HOUSING AND
URBAN DEVELOPMENT
[Docket No. FR–6086–N–08]
RIN 2577–AD05
Economic Growth Regulatory Relief
and Consumer Protection Act:
Implementation of National Standards
for the Physical Inspection of Real
Estate (NSPIRE); Extension of NSPIRE
Compliance Date for HCV Programs
Office of the Assistant
Secretary for Public and Indian
Housing, Department of Housing and
Urban Development (HUD).
ACTION: Notice.
AGENCY:
This notice extends the
compliance date for HUD’s National
Standards for the Physical Inspection of
Real Estate (NSPIRE) final rule for
Housing Choice Voucher (HCV) and
Project Based Voucher (PBV) programs
until October 1, 2024. HUD is taking
this action to allow Public Housing
Authorities (PHAs) additional time to
implement HUD’s NSPIRE standards.
DATES: Compliance Date: Jurisdictions,
participants, and grantees subject to 24
CFR parts 882, 982, and 983 are not
required to comply with the changes to
ddrumheller on DSK120RN23PROD with NOTICES1
SUMMARY:
VerDate Sep<11>2014
18:09 Sep 27, 2023
Jkt 259001
PHAs subject to the HCV and PBV
programs currently use the Housing
Quality Standards (HQS) for
inspections, which are defined at 24
CFR 982.401. The Economic Growth
Regulatory Relief and Consumer
Protection Act: Implementation of
National Standards for Physical
Inspection of Real Estate (NSPIRE) final
rule (‘‘NSPIRE final rule’’) was
published on May 11, 2023 (88 FR
30442). The NSPIRE final rule includes
amendments to 24 CFR parts 982 and
983 effective October 1, 2023.
II. Basis for Delay of Compliance Date
HUD encourages any PHA that is
ready to implement NSPIRE at their
earliest convenience. However, HUD
has determined that additional time is
necessary for some PHAs to implement
NSPIRE for HCV, PBV, and Moderate
Rehabilitation (Mod Rehab) programs.
This will provide PHAs with additional
time to train staff, communicate with
landlords and for HUD to provide
additional technical resources needed
for PHAs and agencies to transition to
the NSPIRE standards.
PHAs who wish to continue using
HQS on or after October 1, 2023, must
notify HUD of their intent to continue
using HQS and the date on which they
plan to transition to NSPIRE. This date
may be no later than October 1, 2024.
This notification must be sent via email
to NSPIREV_AlternateInspection@
Frm 00087
Fmt 4703
IV. Conclusion
Accordingly, HUD revises the October
1, 2023, compliance date for the changes
made to 24 CFR parts 882, 982, and 983
to October 1, 2024, at which time PHAs
subject to these parts must comply with
the NSPIRE final rule. Until October 1,
2024, PHAs subject to these parts may
instead choose to comply with these
parts as they existed prior to October 1,
2023.
Principal Deputy Assistant Secretary
for Public and Indian Housing, Richard
J. Monocchio, having reviewed and
approved this document, is delegating
the authority to electronically sign this
document to submitter, Aaron Santa
Anna, who is the Federal Register
Liaison for HUD, for purposes of
publication in the Federal Register.
Aaron Santa Anna,
Federal Register Liaison for the Department
of Housing and Urban Development.
[FR Doc. 2023–21141 Filed 9–27–23; 8:45 am]
III. Instructions
PO 00000
hud.gov with a courtesy copy to their
Field Office representative. The email’s
subject line must read ‘‘Notification of
Extension of HQS, [PHA code]’’ and the
body of the email should include the
PHA name, PHA code, a statement that
HQS will continue to be used, and what
date the PHA tentatively plans to
implement NSPIRE (which may be no
later than October 1, 2024).
If a PHA implements NSPIRE after
October 1, 2023, but before October 1,
2024, the PHA must notify HUD via
email to NSPIREV_
AlternateInspection@hud.gov with a
courtesy copy to their Field Office
representative. The email’s subject line
must read ‘‘Notification of
Implementation of NSPIRE, [PHA
code]’’ and the body of the email should
include the PHA name, PHA code, a
statement that the PHA will be
transitioning to NSPIRE, and what date
the PHA will implement NSPIRE (which
may be no later than October 1, 2024).
Sfmt 9990
BILLING CODE 4210–67–P
E:\FR\FM\28SEN1.SGM
28SEN1
Agencies
[Federal Register Volume 88, Number 187 (Thursday, September 28, 2023)]
[Notices]
[Pages 66881-66882]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2023-21217]
-----------------------------------------------------------------------
DEPARTMENT OF HOMELAND SECURITY
U.S. Customs and Border Protection
Accreditation and Approval of Saybolt LP (Deer Park, TX) as a
Commercial Gauger and Laboratory
AGENCY: U.S. Customs and Border Protection, Department of Homeland
Security.
ACTION: Notice of accreditation and approval of Saybolt LP (Deer Park,
TX), as a commercial gauger and laboratory.
-----------------------------------------------------------------------
SUMMARY: Notice is hereby given, pursuant to CBP regulations, that
Saybolt LP (Deer Park, TX), has been approved to gauge petroleum and
certain petroleum products and accredited to test petroleum and certain
petroleum products for customs purposes for the next three years as of
August 18, 2022.
DATES: Saybolt LP (Deer Park, TX) was approved and accredited as a
commercial gauger and laboratory as of August 18, 2022. The next
triennial inspection date will be scheduled for August 2025.
FOR FURTHER INFORMATION CONTACT: Mr. Robert P. Munivez, Laboratories
and Scientific Services, U.S. Customs and Border Protection, 4150
Interwood South Parkway, Houston, TX 77032, tel. 281-560-2937.
SUPPLEMENTARY INFORMATION: Notice is hereby given pursuant to 19 CFR
151.12 and 19 CFR 151.13, that Saybolt LP, 201 Deerwood Glen Dr., Deer
Park, TX 77536, has been approved to gauge petroleum and certain
petroleum products and accredited to test petroleum and certain
petroleum products for customs purposes, in accordance with the
provisions of 19 CFR 151.12 and 19 CFR 151.13.
Saybolt LP (Deer Park, TX) is approved for the following gauging
procedures for petroleum and certain petroleum products from the
American Petroleum Institute (API):
------------------------------------------------------------------------
API chapters Title
------------------------------------------------------------------------
3................................... Tank Gauging.
5................................... Metering.
7................................... Temperature Determination.
8................................... Sampling.
12.................................. Calculations.
17.................................. Marine Measurement.
------------------------------------------------------------------------
Saybolt LP (Deer Park, TX) is accredited for the following
laboratory analysis procedures and methods for petroleum and certain
petroleum products set forth by the U.S. Customs and Border Protection
Laboratory Methods (CBPL) and American Society for Testing and
Materials (ASTM):
------------------------------------------------------------------------
CBPL No. ASTM Title
------------------------------------------------------------------------
27-01.................. D287 Standard Test Method for API
Gravity of Crude Petroleum and
Petroleum Products (Hydrometer
Method).
27-02.................. D1298 Standard Test Method for
Density, Relative Density, or
API Gravity of Crude Petroleum
and Liquid Petroleum Products
by Hydrometer Method.
27-03.................. D4006 Standard Test Method for Water
in Crude Oil by Distillation.
27-04.................. D95 Standard Test Method for Water
in Petroleum Products and
Bituminous Materials by
Distillation.
27-05.................. D4928 Standard Test Method for Water
in Crude Oils by Coulometric
Karl Fischer Titration.
27-06.................. D473 Standard Test Method for
Sediment in Crude Oils and Fuel
Oils by the Extraction Method.
27-07.................. D4807 Standard Test Method for
Sediment in Crude Oil by
Membrane Filtration.
27-08.................. D86 Standard Test Method for
Distillation of Petroleum
Products at Atmospheric
Pressure.
27-11.................. D445 Standard Test Method for
Kinematic Viscosity of
Transparent and Opaque Liquids
(and Calculation of Dynamic
Viscosity).
27-13.................. D4294 Standard Test Method for Sulfur
in Petroleum and Petroleum
Products by Energy-Dispersive X-
ray Fluorescence Spectrometry.
27-14.................. D2622 Standard Test Method for Sulfur
in Petroleum Products by
Wavelength Dispersive X-Ray
Fluorescence Spectrometry.
27-46.................. D5002 Standard Test Method for
Density, Relative Density, and
API Gravity of Crude Oils by
Digital Density Analyzer.
[[Page 66882]]
27-48.................. D4052 Standard Test Method for
Density, Relative Density, and
API Gravity of Liquids by
Digital Density Meter.
27-50.................. D93 Standard Test Methods for Flash-
Point by Pensky-Martens Closed
Cup Tester.
------------------------------------------------------------------------
Anyone wishing to employ this entity to conduct laboratory analyses
and gauger services should request and receive written assurances from
the entity that it is accredited or approved by the U.S. Customs and
Border Protection to conduct the specific test or gauger service
requested. Alternatively, inquiries regarding the specific test or
gauger service this entity is accredited or approved to perform may be
directed to the U.S. Customs and Border Protection by calling (202)
344-1060. The inquiry may also be sent to [email protected].
Please reference the website listed below for a complete listing of CBP
approved gaugers and accredited laboratories. https://www.cbp.gov/about/labs-scientific/commercial-gaugers-and-laboratories.
James D. Sweet,
Laboratory Director, Houston, Laboratories and Scientific Services
Directorate.
[FR Doc. 2023-21217 Filed 9-27-23; 8:45 am]
BILLING CODE 9111-14-P