Certain New Chemicals; Receipt and Status Information for August 2023, 63565-63572 [2023-20047]
Download as PDF
<![CDATA[
Federal Register / Vol. 88, No. 178 / Friday, September 15, 2023 / Notices
clearly identified. Commission staff also
reviewed the supporting information for
these FFTs or CEs and agreed with the
final risk determinations for all 65
noncompliances, which clearly
identified the factors affecting the risk
prior to mitigation (such as potential
and actual risk) and actual harm.
Further, no FFTs or CEs sampled
contained any material
misrepresentations by the registered
entities. Commission staff found that the
Regional Entities appropriately
identified 64 of the 65 noncompliances
as appropriate to be processed as FFTs
and CEs. Nevertheless, there was one
identified instance where an FFT would
have been more appropriately processed
as a spreadsheet notice of penalty. Staff
also noted in three instances that the
posted description of the
noncompliances were incomplete or
had minor errors.
Dated: September 11, 2023.
Kimberly D. Bose,
Secretary.
[FR Doc. 2023–19992 Filed 9–14–23; 8:45 am]
BILLING CODE 6717–01–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2023–0061; FRL–10581–
08–OCSPP]
SUPPLEMENTARY INFORMATION:
Certain New Chemicals; Receipt and
Status Information for August 2023
I. Executive Summary
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
ddrumheller on DSK120RN23PROD with NOTICES1
A. What action is the Agency taking?
EPA is required under the
Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg
Chemical Safety for the 21st Century
Act, to make information publicly
available and to publish information in
the Federal Register pertaining to
submissions under TSCA section 5,
including notice of receipt of a
Premanufacture notice (PMN),
Significant New Use Notice (SNUN) or
Microbial Commercial Activity Notice
(MCAN), including an amended notice
or test information; an exemption
application (Biotech exemption); an
application for a test marketing
exemption (TME), both pending and/or
concluded; a notice of commencement
(NOC) of manufacture (including
import) for new chemical substances;
and a periodic status report on new
chemical substances that are currently
under EPA review or have recently
concluded review. This document
covers the period from 8/1/2023 to 8/31/
2023.
SUMMARY:
VerDate Sep<11>2014
17:05 Sep 14, 2023
Jkt 259001
Comments identified by the
specific case number provided in this
document must be received on or before
October 16, 2023.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2023–0061,
through the Federal eRulemaking Portal
at https://www.regulations.gov. Follow
the online instructions for submitting
comments. Do not submit electronically
any information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute. Additional
instructions on commenting and visiting
the docket, along with more information
about dockets generally, is available at
https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim
Rahai, Project Management and
Operations Division (MC 7407M), Office
of Pollution Prevention and Toxics,
Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC
20460–0001; telephone number: (202)
564–8593; email address: rahai.jim@
epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
DATES:
This document provides the receipt
and status reports for the period from 8/
01/2023 to 8/31/2023. The Agency is
providing notice of receipt of PMNs,
SNUNs, and MCANs (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (Biotech exemption); TMEs,
both pending and/or concluded; NOCs
to manufacture a new chemical
substance; and a periodic status report
on new chemical substances that are
currently under EPA review or have
recently concluded review.
EPA is also providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
PO 00000
Frm 00016
Fmt 4703
Sfmt 4703
63565
B. What is the Agency’s authority for
taking this action?
Under the Toxic Substances Control
Act (TSCA), 15 U.S.C. 2601 et seq., a
chemical substance may be either an
‘‘existing’’ chemical substance or a
‘‘new’’ chemical substance. Any
chemical substance that is not on EPA’s
TSCA Inventory of Chemical Substances
(TSCA Inventory) is classified as a ‘‘new
chemical substance,’’ while a chemical
substance that is listed on the TSCA
Inventory is classified as an ‘‘existing
chemical substance.’’ (See TSCA section
3(11).) For more information about the
TSCA Inventory please go to: https://
www.epa.gov/tsca-inventory.
Any person who intends to
manufacture (including import) a new
chemical substance for a non-exempt
commercial purpose, or to manufacture
or process a chemical substance in a
non-exempt manner for a use that EPA
has determined is a significant new use,
is required by TSCA section 5 to
provide EPA with a PMN, MCAN, or
SNUN, as appropriate, before initiating
the activity. EPA will review the notice,
make a risk determination on the
chemical substance or significant new
use, and take appropriate action as
described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA
to allow persons, upon application and
under appropriate restrictions, to
manufacture or process a new chemical
substance, or a chemical substance
subject to a significant new use rule
(SNUR) issued under TSCA section
5(a)(2), for ‘‘test marketing’’ purposes,
upon a showing that the manufacture,
processing, distribution in commerce,
use, and disposal of the chemical will
not present an unreasonable risk of
injury to health or the environment.
This is referred to as a test marketing
exemption, or TME. For more
information about the requirements
applicable to a new chemical go to:
https://www.epa.gov/chemicals-undertsca.
Under TSCA sections 5 and 8 and
EPA regulations, EPA is required to
publish in the Federal Register certain
information, including notice of receipt
of a PMN/SNUN/MCAN (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (biotech exemption); an
application for a TME, both pending
and concluded; NOCs to manufacture a
new chemical substance; and a periodic
status report on the new chemical
substances that are currently under EPA
review or have recently concluded
review.
E:\FR\FM\15SEN1.SGM
15SEN1
63566
Federal Register / Vol. 88, No. 178 / Friday, September 15, 2023 / Notices
C. Does this action apply to me?
This action provides information that
is directed to the public in general.
D. Does this action have any
incremental economic impacts or
paperwork burdens?
No.
E. What should I consider as I prepare
my comments for EPA?
1. Submitting confidential business
information (CBI). Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
commenting-epa-dockets.
II. Status Reports
In the past, EPA has published
individual notices reflecting the status
of TSCA section 5 filings received,
pending or concluded. In 1995, the
Agency modified its approach and
streamlined the information published
in the Federal Register after providing
notice of such changes to the public and
an opportunity to comment (see the
Federal Register of May 12, 1995 (60 FR
25798) (FRL–4942–7)). Since the
passage of the Lautenberg amendments
to TSCA in 2016, public interest in
information on the status of section 5
cases under EPA review and, in
particular, the final determination of
such cases, has increased. In an effort to
be responsive to the regulated
community, the users of this
information, and the general public, to
comply with the requirements of TSCA,
to conserve EPA resources and to
streamline the process and make it more
timely, EPA is providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that
have passed an initial screening by EPA
during this period, Table I provides the
following information (to the extent that
such information is not subject to a CBI
claim) on the notices screened by EPA
during this period: The EPA case
number assigned to the notice that
indicates whether the submission is an
initial submission, or an amendment, a
notation of which version was received,
the date the notice was received by EPA,
the submitting manufacturer (i.e.,
domestic producer or importer), the
potential uses identified by the
manufacturer in the notice, and the
chemical substance identity.
As used in each of the tables in this
unit, (S) indicates that the information
in the table is the specific information
provided by the submitter, and (G)
indicates that this information in the
table is generic information because the
specific information provided by the
submitter was claimed as CBI.
Submissions which are initial
submissions will not have a letter
following the case number. Submissions
which are amendments to previous
submissions will have a case number
followed by the letter ‘‘A’’ (e.g. P–18–
1234A). The version column designates
submissions in sequence as ‘‘1’’, ‘‘2’’,
‘‘3’’, etc. Note that in some cases, an
initial submission is not numbered as
version 1; this is because earlier
version(s) were rejected as incomplete
or invalid submissions. Note also that
future versions of the following tables
may adjust slightly as the Agency works
to automate population of the data in
the tables.
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 08/01/2023 TO 08/31/2023
ddrumheller on DSK120RN23PROD with NOTICES1
Case No.
Received
date
Version
Manufacturer
Use
Chemical substance
(S) 2,4,8,10-Tetraoxa-3,9diphosphaspiro[5.5]undecane, 3,9-bis-[2(1-methyl-1-phenylethyl)-4-(1,1,3,3tetramethylbutyl)phenoxy]-.
(G) Perfluorinated substituted 1,3oxathiolane dioxide.
(G) Perfluorinated substituted 1,3oxathiolane dioxide.
(G) Perfluorinated vinyl haloalkane
sulfonate salt.
(G) Perfluorinated vinyl haloalkane
sulfonate salt.
(G) Perfluorinated vinyl haloalkane sulfonyl
halide.
(G) Perfluorinated vinyl haloalkane sulfonyl
halide.
(G) Aliphatic Diisocyanate, homopolymer,
aliphatic alcohol blocked.
(G) Epoxidized Vegetable oil, polymer with
bisphenol A, aryl glycidyl ether,
epichlorohydrin, polyethylene glycol and
trimethylolpropane.
(S) Manganate(4-), hexakis(cyano.kappa.C)-, manganese (2+) sodium,
(OC–6–11)-.
(S) Ferrate (-4), hexakis(cyano-.kappa.C)-,
iron(3+) manganese(2+) sodium, (OC–6–
11)-.
P–18–0346A ...........
5
07/25/2023
Chitec Technology Co.,
Ltd.
(S) Antioxidant compounded into various polymers to be used in extrusion processes to fabricate articles.
P–20–0031A ...........
6
08/16/2023
CBI ..................................
(G) Intermediate ...................................
P–20–0031A ...........
7
08/21/2023
CBI ..................................
(G) Intermediate ...................................
P–20–0033A ...........
4
08/16/2023
CBI ..................................
(G) Intermediate ...................................
P–20–0033A ...........
5
08/21/2023
CBI ..................................
(G) Intermediate ...................................
P–20–0034A ...........
4
08/16/2023
CBI ..................................
(G) Intermediate ...................................
P–20–0034A ...........
5
08/21/2023
CBI ..................................
(G) Intermediate ...................................
P–21–0143A ...........
3
08/04/2023
CBI ..................................
P–21–0151A ...........
3
08/16/2023
CBI ..................................
(G) Coating ingredient, adhesive ingredient.
(G) Polyurethane applications .............
P–22–0040A ...........
3
08/27/2023
CBI ..................................
(G) Component used in manufacture
of high-performance batteries.
P–22–0041A ...........
3
08/27/2023
CBI ..................................
(G) A component used in the manufacture of batteries.
VerDate Sep<11>2014
17:05 Sep 14, 2023
Jkt 259001
PO 00000
Frm 00017
Fmt 4703
Sfmt 4703
E:\FR\FM\15SEN1.SGM
15SEN1
Federal Register / Vol. 88, No. 178 / Friday, September 15, 2023 / Notices
63567
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 08/01/2023 TO 08/31/2023—Continued
ddrumheller on DSK120RN23PROD with NOTICES1
Case No.
Received
date
Version
Manufacturer
Use
Chemical substance
(S) Ethanol, 2-amino-, compds. with polyethylene glycol hydrogen sulfate C10–16alkyl ether.
(S) Methanesulfonamide,1,1,1-trifluoro-N[(trifluoromethyl)sulfonyl]-, sodium salt
(1:1).
(G) Derivatives of fats and oils, plant
based, polycyclic acids functionalized, aromatic acids, polyester with diols and
triols.
(S) Multiwalled Carbon Nanotube.
P–22–0053A ...........
5
08/07/2023
CBI ..................................
(G) additive in agricultural formulations
P–22–0058A ...........
4
08/24/2023
Solvay Fluorides, LLC .....
(G) Process chemical ..........................
P–23–0099 .............
4
08/30/2023
CBI ..................................
(G) PIR and PUR rigid insulation materials.
P–23–0107A ...........
6
08/02/2023
Cnano Technology USA,
Inc.
P–23–0107A ...........
7
08/08/2023
Cnano Technology USA,
Inc.
P–23–0107A ...........
8
08/08/2023
Cnano Technology USA,
Inc.
P–23–0108A ...........
6
08/02/2023
Cnano Technology USA,
Inc.
P–23–0108A ...........
7
08/08/2023
Cnano Technology USA,
Inc.
P–23–0108A ...........
8
08/08/2023
Cnano Technology USA,
Inc.
P–23–0109A ...........
5
08/02/2023
Cnano Technology USA,
Inc.
(S) Lithium-Ion Battery Conductive
Agent, Liquid Products Containing
MWCNT as a semi conductive
enhancer, chemical carrier, reflectivity reducer and anticorrosion/
antifouling stimulant, Solid Products
Containing MWCNT as a structural
reinforcement, conductive stabilizer,
composite & tensile strength
enhancer and heat conductor.
(S) Lithium-Ion Battery Conductive
Agent, Liquid Products Containing
MWCNT as a semi conductive
enhancer, chemical carrier, reflectivity reducer and anticorrosion/
antifouling stimulant, Solid Products
Containing MWCNT as a structural
reinforcement, conductive stabilizer,
composite & tensile strength
enhancer and heat conductor.
(S) Lithium-Ion Battery Conductive
Agent, Liquid Products Containing
MWCNT as a semi conductive
enhancer, chemical carrier, reflectivity reducer and anticorrosion/
antifouling stimulant, Solid Products
Containing MWCNT as a structural
reinforcement, conductive stabilizer,
composite & tensile strength
enhancer and heat conductor.
(S) Lithium-Ion Battery Conductive
Agent, Liquid Products Containing
MWCNT as a semi conductive
enhancer, chemical carrier, reflectivity reducer and anticorrosion/
antifouling stimulant, Solid Products
Containing MWCNT as a structural
reinforcement, conductive stabilizer,
composite & tensile strength
enhancer and heat conductor.
(S) Lithium-Ion Battery Conductive
Agent, Liquid Products Containing
MWCNT as a semi conductive
enhancer, chemical carrier, reflectivity reducer and anticorrosion/
antifouling stimulant, Solid Products
Containing MWCNT as a structural
reinforcement, conductive stabilizer,
composite & tensile strength
enhancer and heat conductor.
(S) Lithium-Ion Battery Conductive
Agent, Liquid Products Containing
MWCNT as a semi conductive
enhancer, chemical carrier, reflectivity reducer and anticorrosion/
antifouling stimulant, Solid Products
Containing MWCNT as a structural
reinforcement, conductive stabilizer,
composite & tensile strength
enhancer and heat conductor.
(S) Lithium-Ion Battery Conductive
Agent, Liquid Products Containing
MWCNT as a semi conductive
enhancer, chemical carrier, reflectivity reducer and anticorrosion/
antifouling stimulant, Solid Products
Containing MWCNT as a structural
reinforcement, conductive stabilizer,
composite & tensile strength
enhancer and heat conductor.
VerDate Sep<11>2014
17:05 Sep 14, 2023
Jkt 259001
PO 00000
Frm 00018
Fmt 4703
Sfmt 4703
E:\FR\FM\15SEN1.SGM
(S) Multiwalled Carbon Nanotube.
(S) Multiwalled Carbon Nanotube.
(S) Multiwalled Carbon Nanotube.
(S) Multiwalled Carbon Nanotube.
(S) Multiwalled Carbon Nanotube.
(S) Multiwalled Carbon Nanotube.
15SEN1
63568
Federal Register / Vol. 88, No. 178 / Friday, September 15, 2023 / Notices
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 08/01/2023 TO 08/31/2023—Continued
ddrumheller on DSK120RN23PROD with NOTICES1
Case No.
Received
date
Version
Manufacturer
Use
(S) Lithium-Ion Battery Conductive
Agent, Liquid Products Containing
MWCNT as a semi conductive
enhancer, chemical carrier, reflectivity reducer and anticorrosion/
antifouling stimulant, Solid Products
Containing MWCNT as a structural
reinforcement, conductive stabilizer,
composite & tensile strength
enhancer and heat conductor.
(S) Lithium-Ion Battery Conductive
Agent, Liquid Products Containing
MWCNT as a semi conductive
enhancer, chemical carrier, reflectivity reducer and anticorrosion/
antifouling stimulant, Solid Products
Containing MWCNT as a structural
reinforcement, conductive stabilizer,
composite & tensile strength
enhancer and heat conductor.
(S) Lithium-Ion Battery Conductive
Agent, Liquid Products Containing
MWCNT as a semi conductive
enhancer, chemical carrier, reflectivity reducer and anticorrosion/
antifouling stimulant, Solid Products
Containing MWCNT as a structural
reinforcement, conductive stabilizer,
composite & tensile strength
enhancer and heat conductor.
(S) Lithium-Ion Battery Conductive
Agent, Liquid Products Containing
MWCNT as a semi conductive
enhancer, chemical carrier, reflectivity reducer and anticorrosion/
antifouling stimulant, Solid Products
Containing MWCNT as a structural
reinforcement, conductive stabilizer,
composite & tensile strength
enhancer and heat conductor.
(S) Lithium-Ion Battery Conductive
Agent, Liquid Products Containing
MWCNT as a semi conductive
enhancer, chemical carrier, reflectivity reducer and anticorrosion/
antifouling stimulant, Solid Products
Containing MWCNT as a structural
reinforcement, conductive stabilizer,
composite & tensile strength
enhancer and heat conductor.
(S) Lithium-Ion Battery Conductive
Agent (Precursor), Liquid Products
Containing MWCNT as a semi conductive enhancer, chemical carrier,
reflectivity reducer and
anticorrosion/antifouling stimulant,
Solid Products Containing MWCNT
as a structural reinforcement, conductive stabilizer, composite & tensile strength enhancer and heat
conductor.
(S) Lithium-Ion Battery Conductive
Agent (Precursor), Liquid Products
Containing MWCNT as a semi conductive enhancer, chemical carrier,
reflectivity reducer and
anticorrosion/antifouling stimulant,
Solid Products Containing MWCNT
as a structural reinforcement, conductive stabilizer, composite & tensile strength enhancer and heat
conductor.
P–23–0109A ...........
6
08/08/2023
Cnano Technology USA,
Inc.
P–23–0109A ...........
7
08/08/2023
Cnano Technology USA,
Inc.
P–23–0110A ...........
5
08/02/2023
Cnano Technology USA,
Inc.
P–23–0110A ...........
6
08/08/2023
Cnano Technology USA,
Inc.
P–23–0110A ...........
7
08/08/2023
Cnano Technology USA,
Inc.
P–23–0111A ...........
6
08/02/2023
Cnano Technology USA,
Inc.
P–23–0111A ...........
7
08/08/2023
Cnano Technology USA,
Inc.
VerDate Sep<11>2014
17:05 Sep 14, 2023
Jkt 259001
PO 00000
Frm 00019
Fmt 4703
Sfmt 4703
E:\FR\FM\15SEN1.SGM
Chemical substance
(S) Multiwalled Carbon Nanotube.
(S) Multiwalled Carbon Nanotube.
(S) Multiwalled Carbon Nanotube.
(S) Multiwalled Carbon Nanotube.
(S) Multiwalled Carbon Nanotube.
(S) Multiwalled Carbon Nanotube.
(S) Multiwalled Carbon Nanotube.
15SEN1
Federal Register / Vol. 88, No. 178 / Friday, September 15, 2023 / Notices
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 08/01/2023 TO 08/31/2023—Continued
ddrumheller on DSK120RN23PROD with NOTICES1
Case No.
Received
date
Version
Manufacturer
Use
(S) Lithium-Ion Battery Conductive
Agent, Liquid Products Containing
MWCNT as a semi conductive
enhancer, chemical carrier, reflectivity reducer and anticorrosion/
antifouling stimulant, Solid Products
Containing MWCNT as a structural
reinforcement, conductive stabilizer,
composite & tensile strength
enhancer and heat conductor.
(S) Lithium-Ion Battery Conductive
Agent, Liquid Products Containing
MWCNT as a semi conductive
enhancer, chemical carrier, reflectivity reducer and anticorrosion/
antifouling stimulant, Solid Products
Containing MWCNT as a structural
reinforcement, conductive stabilizer,
composite & tensile strength
enhancer and heat conductor.
(S) Lithium-Ion Battery Conductive
Agent, Liquid Products Containing
MWCNT as a semi conductive
enhancer, chemical carrier, reflectivity reducer and anticorrosion/
antifouling stimulant, Solid Products
Containing MWCNT as a structural
reinforcement, conductive stabilizer,
composite & tensile strength
enhancer and heat conductor.
(S) Lithium-Ion Battery Conductive
Agent, Liquid Products Containing
MWCNT as a semi conductive
enhancer, chemical carrier, reflectivity reducer and anticorrosion/
antifouling stimulant, Solid Products
Containing MWCNT as a structural
reinforcement, conductive stabilizer,
composite & tensile strength
enhancer and heat conductor.
(S) Lithium-Ion Battery Conductive
Agent (Precursor), Liquid Products
Containing MWCNT as a semi conductive enhancer, chemical carrier,
reflectivity reducer and
anticorrosion/antifouling stimulant,
Solid Products Containing MWCNT
as a structural reinforcement, conductive stabilizer, composite & tensile strength enhancer and heat
conductor.
(S) Lithium-Ion Battery Conductive
Agent (Precursor), Liquid Products
Containing MWCNT as a semi conductive enhancer, chemical carrier,
reflectivity reducer and
anticorrosion/antifouling stimulant,
Solid Products Containing MWCNT
as a structural reinforcement, conductive stabilizer, composite & tensile strength enhancer and heat
conductor.
(S) Lithium-Ion Battery Conductive
Agent (Precursor), Liquid Products
Containing MWCNT as a semi conductive enhancer, chemical carrier,
reflectivity reducer and
anticorrosion/antifouling stimulant,
Solid Products Containing MWCNT
as a structural reinforcement, conductive stabilizer, composite & tensile strength enhancer and heat
conductor.
P–23–0112A ...........
6
08/02/2023
Cnano Technology USA,
Inc.
P–23–0112A ...........
7
08/08/2023
Cnano Technology USA,
Inc.
P–23–0113A ...........
6
08/02/2023
Cnano Technology USA,
Inc.
P–23–0113A ...........
7
08/08/2023
Cnano Technology USA,
Inc.
P–23–0114A ...........
5
08/02/2023
Cnano Technology USA,
Inc.
P–23–0114A ...........
6
08/08/2023
Cnano Technology USA,
Inc.
P–23–0115A ...........
5
08/02/2023
Cnano Technology USA,
Inc.
VerDate Sep<11>2014
17:05 Sep 14, 2023
Jkt 259001
PO 00000
Frm 00020
Fmt 4703
Sfmt 4703
E:\FR\FM\15SEN1.SGM
Chemical substance
(S) Multiwalled Carbon Nanotube.
(S) Multiwalled Carbon Nanotube.
(S) Multiwalled Carbon Nanotube.
(S) Multiwalled Carbon Nanotube.
(S) Multiwalled Carbon Nanotube.
(S) Multiwalled Carbon Nanotube.
(S) Multiwalled Carbon Nanotube.
15SEN1
63569
63570
Federal Register / Vol. 88, No. 178 / Friday, September 15, 2023 / Notices
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 08/01/2023 TO 08/31/2023—Continued
ddrumheller on DSK120RN23PROD with NOTICES1
Case No.
Received
date
Version
Manufacturer
Use
P–23–0115A ...........
6
08/08/2023
Cnano Technology USA,
Inc.
P–23–0116A ...........
5
08/02/2023
Cnano Technology USA,
Inc.
P–23–0116A ...........
6
08/08/2023
Cnano Technology USA,
Inc.
P–23–0129A ...........
P–23–0129A ...........
P–23–0130 .............
6
7
4
08/01/2023
08/03/2023
08/25/2023
Polymer Additives, Inc ....
Polymer Additives, Inc ....
CBI ..................................
(S) Liquid Products Containing
MWCNT as a semi conductive
enhancer, chemical carrier, reflectivity reducer and anticorrosion/
antifouling stimulant, Solid Products
Containing MWCNT as a structural
reinforcement, conductive stabilizer,
composite & tensile strength
enhancer and heat conductor, Lithium-Ion Battery Conductive Agent
(Precursor).
(S) Lithium-Ion Battery Conductive
Agent, Liquid Products Containing
MWCNT as a semi conductive
enhancer, chemical carrier, reflectivity reducer and anticorrosion/
antifouling stimulant, Solid Products
Containing MWCNT as a structural
reinforcement, conductive stabilizer,
composite & tensile strength
enhancer and heat conductor.
(S) Lithium-Ion Battery Conductive
Agent, Liquid Products Containing
MWCNT as a semi conductive
enhancer, chemical carrier, reflectivity reducer and anticorrosion/
antifouling stimulant, Solid Products
Containing MWCNT as a structural
reinforcement, conductive stabilizer,
composite & tensile strength
enhancer and heat conductor.
(G) Intermediate ...................................
(G) Intermediate ...................................
(G) Component in asphalt ...................
P–23–0133A ...........
4
08/25/2023
CBI ..................................
(G) Component in asphalt ...................
P–23–0137 .............
3
08/21/2023
CBI ..................................
(G) Polymerization Catalyst .................
P–23–0139 .............
3
08/02/2023
Polymer Additives, Inc ....
P–23–0139A ...........
4
08/03/2023
Polymer Additives, Inc ....
P–23–0142A ...........
P–23–0146 .............
2
2
08/28/2023
08/10/2023
CBI ..................................
CBI ..................................
(S) Santicizer(R) Platinum G–3000 will
be used as a plasticizer for polymers such as PVC, polyurethane,
and rubber. It helps reduce glass
transition temperature of the polymer and make the polymer more
flexible in the end applications.
(S) Santicizer(R) Platinum G–3000 will
be used as a plasticizer for polymers such as PVC, polyurethane,
and rubber. It helps reduce glass
transition temperature of the polymer and make the polymer more
flexible in the end applications.
(G) Destructive use ..............................
(G) Lubricant additive ..........................
P–23–0150A ...........
3
08/03/2023
CBI ..................................
(G) Industrial use for roll-on, brushing,
and spray application.
P–23–0154 .............
2
08/17/2023
RWDC Industries ............
P–23–0157 .............
P–23–0158 .............
3
2
08/25/2023
08/01/2023
CBI ..................................
Fujifilm Electronic Materials USA, Inc.
(G) The primary application areas for
PHA are for food packaging and
other uses where its biodegradable
properties provide nontraditional
end-of-use options.
(G) Component in Asphalt ...................
(G) Photoacid generator (PAG) ...........
P–23–0159 .............
2
08/02/2023
P–23–0160 .............
P–23–0162 .............
1
3
07/31/2023
08/23/2023
Fujifilm Electronic Materials USA, Inc.
CBI ..................................
CBI ..................................
P–23–0164 .............
1
08/11/2023
Shepherd Chemical ........
P–23–0165 .............
3
08/22/2023
CBI ..................................
VerDate Sep<11>2014
17:05 Sep 14, 2023
Jkt 259001
PO 00000
Frm 00021
(G) Photoacid Generator .....................
(G) Destructive use ..............................
(S) Transportation fuels, Chemical
Feedstock, Fuel additive.
(S) Gelling catalyst for polyurethanes
(G) Production aide for the manufacturing of polymers.
Fmt 4703
Sfmt 4703
E:\FR\FM\15SEN1.SGM
Chemical substance
(S) Multiwalled Carbon Nanotube.
(S) Multiwalled Carbon Nanotube.
(S) Multiwalled Carbon Nanotube.
(G) Benzyl fatty acid esters.
(G) Benzyl fatty acid esters.
(G) Fatty Acids reaction products with
polyalkylpolyamines, salts.
(G) Fatty acids reaction products with
alcoholamine reaction by-products, salts.
(G) Methanone, [bis-phenyl
phosphinyl](2,4,6-trimethylphenyl)-.
(G) Benzyl fatty acid esters, epoxidized.
(G) Benzyl fatty acid esters, epoxidized.
(G) Alkenal, 9-(acetyloxy)-, (E)-.
(G) Urea, N,N‘‘-(methylenedi-4,1-phenylene)bis-, N′,N″-bis(mixed cycloalkyl and
alkyl) derivs.
(G) Branched Glycidyl Ester and Bisphenol
Glycidyl Ether polymer adduct with
Aralkyl Diamine.
(G) Vegetable oils, Cupriavidus-fermented,
polyhydroxyalkanoate copolymer.
(G) Alkyl-diamine, Fatty Acid Amides, salts.
(G) triarylsulfonium, salt with alkylperfluoro
sulfonylaminoalkylfluoro
alkylpolyfluoroamide.
(G) triarylsulfonium, salt with alkyl polycycle
ester of alkylfluro sulfocarboxylate.
(G) Alkenoyl chloride, 3-methyl-.
(G) Alkane (glyceridic), hydrotreated and
isomerized.
(S) Bismuth, 1,1′,1″,1″-(1,2ethanediyldinitrilo)tetrakis[2-propanol] 2(2-ethoxyethoxy)ethanol neodecanoate
polypropylene glycol complexes.
(G) 2,3,3,3-tetrafluoro-2-[(polyfluoroalken-1yl)oxy]-propanoic acid homopolymer.
15SEN1
Federal Register / Vol. 88, No. 178 / Friday, September 15, 2023 / Notices
63571
TABLE I—PMN/SNUN/MCANS APPROVED * FROM 08/01/2023 TO 08/31/2023—Continued
Case No.
Received
date
Version
Manufacturer
Use
Chemical substance
(G) Monomer for UV curable application.
(G) Battery production .........................
(G) Polypropylene glycol allyloxymethyl acrylate.
(G) Bisalkyldiacid fluorophosphate salt.
P–23–0166 .............
1
08/16/2023
CBI ..................................
P–23–0167 .............
2
08/30/2023
P–23–0168 .............
2
08/29/2023
(G) Battery production .........................
(G) Sulfamoyl halide fluorophosphate salt.
P–23–0169 .............
P–23–0170 .............
1
1
08/22/2023
08/22/2023
Central Glass International, Inc.
Central Glass International, Inc.
Gelest ..............................
CBI ..................................
(G) Intermediate ...................................
(G) Fuel additive ..................................
P–23–0172 .............
1
08/28/2023
CBI ..................................
(G) Photolithography ............................
P–23–0173 .............
1
08/29/2023
CBI ..................................
P–23–0174 .............
1
08/30/2023
CBI ..................................
(G) Component used in battery manufacturing.
(G) Component used in battery manufacturing.
(G) Alkane, bis(chlorosilane).
(G) Ethanaminium, 2-[3-(2,5-dioxo-1heteromonocyclic) propoxy]-N,N,Ntrimethyl-, monopolyisobutylene derivs.,
Me ethanedioate.
(G) Sulfonium, tricarbocyclic-,
alkylcarbomocyclic-polyfluoroheteropolycyclic-alkyl sulfonate (1:1),
polymer with alkylaryl and
carbomonocyclic alkyl alkanoate, di-Me
2,2′-(1,2-diazenediyl)bis[2alkylalkanoate]-initiated.
(G) Cellulose, alkoxyalkyl ether, alkali metal
salt.
(G) Mixed metal oxide.
In Table II of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the NOCs that have passed an
initial screening by EPA during this
period: The EPA case number assigned
to the NOC including whether the
submission was an initial or amended
submission, the date the NOC was
received by EPA, the date of
commencement provided by the
submitter in the NOC, a notation of the
type of amendment (e.g., amendment to
generic name, specific name, technical
contact information, etc.) and chemical
substance identity.
TABLE II—NOCS APPROVED * FROM 08/01/2023 TO 08/31/2023
If amendment,
type of
amendment
Received date
Commencement
date
J–21–0013 .........
08/23/2023
08/12/2023
N
P–12–0326 ........
08/10/2023
08/01/2023
N
P–12–0384 ........
P–20–0056 ........
P–20–0178 ........
08/10/2023
08/11/2023
08/21/2023
08/02/2023
07/12/2023
08/02/2023
N
N
N
P–21–0216
P–22–0034
P–22–0069
P–22–0151
08/17/2023
08/08/2023
08/02/2023
08/29/2023
07/21/2023
07/31/2023
07/03/2023
08/29/2023
N
N
N
N
Case No.
........
........
........
........
Chemical substance
(G) Yeast that has been stably modified for the production of an agricultural product.
(G) Dicyclohexylmethane-4,4′-diisocyanate, polymer with
ethoxylated, propoxylated polyethers.
(G) Secondary amine-terminated polyether triol.
(G) Phosphated acrylic polymer.
(G) Carbopolycyclic alkenyl, 2-carboxylic acid, 2[[[(diarylalkyl)]carbonyl]oxy]ethyl ester.
(G) Multi-walled carbon nanotubes.
(G) Alkylphosphonic acid, disodium salt.
(G) Fluorohetero acid, metal salt.
(G) Glycolipids, sophorose-contg., starmerella bombicola c18-unsatd.
glycerides and carbohydrates.
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been
provided with the submission.
ddrumheller on DSK120RN23PROD with NOTICES1
In Table III of this unit, EPA provides
the following information (to the extent
such information is not subject to a CBI
claim) on the test information that has
VerDate Sep<11>2014
17:05 Sep 14, 2023
Jkt 259001
been received during this time period:
The EPA case number assigned to the
test information; the date the test
information was received by EPA, the
PO 00000
Frm 00022
Fmt 4703
Sfmt 4703
type of test information submitted, and
chemical substance identity.
E:\FR\FM\15SEN1.SGM
15SEN1
63572
Federal Register / Vol. 88, No. 178 / Friday, September 15, 2023 / Notices
TABLE III—TEST INFORMATION RECEIVED FROM 08/01/2023 TO 08/31/2023
Case No.
Received date
P–23–0170 .........
08/25/2023
Type of test information
Chemical substance
Water Solubility: Column Elution Method; Shake Flask Method (OECD
Test Guideline 105); Freshwater and Saltwater Fish Acute Toxicity
Test (OECD Test Guideline 203); Estimation of the Adsorption Coefficient (Koc) on Soil and on Sewage Sludge using High Performance Liquid Chromatography (HPLC) (OECD Test Guideline 121);
Partition Coefficient (n-octanol/water), Estimation by Liquid Chromatography (OECD Test Guideline 117); Solution/Extraction Behavior
of Polymers in Water (OECD Test Guideline 120); Modified Activated Sludge, Respiration Inhibition Test (OCSPP Test Guideline
795.1700); Fish, Juvenile Growth Test (OECD Test Guideline 215);
Fish Bioconcentration Factor (BCF) (OECD Test Guideline 305);
Seed Germination/Root Elongation Test Report; Analytical Method
Validation Report; Repeat Dose 28-day Oral Toxicity Study in Rodents (OECD Test Guideline 407); Prenatal Development Toxicity
Study (OECD Test Guideline 414); 90-day Oral Toxicity in Rodents
(OECD Test Guideline 408).
(G) Ethanaminium, 2-[3-(2,5-dioxo1-heteromonocyclic) propoxy]n,n,n-trimethyl-,
monopolyisobutylene derivs., me
ethanedioate.
If you are interested in information
that is not included in these tables, you
may contact EPA’s technical
information contact or general
information contact as described under
FOR FURTHER INFORMATION CONTACT to
access additional non-CBI information
that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: September 12, 2023.
Pamela Myrick,
Director, Project Management and Operations
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. 2023–20047 Filed 9–14–23; 8:45 am]
BILLING CODE 6560–50–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2003–0004; FRL–11388–
01–OCSPP]
Access to Confidential Business
Information by Eastern Research
Group
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
EPA has authorized its
contractor, Eastern Research Group
(ERG) of Lexington, MA/Chantilly, VA
to access information which has been
submitted to EPA under all sections of
the Toxic Substances Control Act
(TSCA). Some of the information may be
claimed or determined to be
Confidential Business Information (CBI).
DATES: Access to the confidential data
will occur no sooner than September 22,
2023.
FOR FURTHER INFORMATION CONTACT:
For technical information contact:
Colby Lintner or Adam Schwoerer,
Project Management and Operations
Division (7407M), Office of Pollution
ddrumheller on DSK120RN23PROD with NOTICES1
SUMMARY:
VerDate Sep<11>2014
17:05 Sep 14, 2023
Jkt 259001
Prevention and Toxics, Environmental
Protection Agency, 1200 Pennsylvania
Ave. NW, Washington, DC 20460–0001;
telephone number: (202) 564–8182;
email address: lintner.colby@epa.gov or
email address: schwoerer.adam@
epa.gov; telephone number: (202) 564–
4767.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
the visitor instructions and additional
information about the docket available
at https://www.epa.gov/dockets.
II. What action is the agency taking?
Under EPA contract number
68HERD20A0002/68HERH23F0207,
contractor ERG of 110 Hartwell Ave,
Suite 1 Lexington, MA/14555 Avion
Parkway, Suite 200 Chantilly, VA will
assist the Office of Pollution Prevention
and Toxics (OPPT) in supporting in
engineering assessments for the
exposure evaluation and assessment of
chemical substances and related
SUPPLEMENTARY INFORMATION:
regulatory actions.
In accordance with 40 CFR 2.306(j),
I. General Information
EPA has determined that under EPA
A. Does this Action apply to me?
contract number 68HERD20A0002/
This action is directed to the public
68HERH23F0207, ERG will require
in general. This action may, however, be access to CBI submitted to EPA under
of interest to all who manufacture,
all section(s) of TSCA to perform
process, or distribute industrial
successfully the duties specified under
chemicals. Since other entities may also the contract. ERG personnel will be
be interested, the Agency has not
given access to information submitted to
attempted to describe all the specific
EPA under all section(s) of TSCA. Some
entities that may be affected by this
of the information may be claimed or
action.
determined to be CBI.
EPA is issuing this notice to inform
B. How can I get copies of this document
all submitters of information under all
and other related information?
sections of TSCA that EPA may provide
The docket for this action, identified
ERG access to these CBI materials on a
by docket identification (ID) number
need-to-know basis only. All access to
EPA–HQ–OPPT–2003–0004 is available TSCA CBI under this contract will take
at https://www.regulations.gov or at the
place at EPA Headquarters and ERG’s
Office of Pollution Prevention and
site located at 14555 Avion Parkway,
Toxics Docket (OPPT Docket),
Suite 200, Chantilly, VA, in accordance
Environmental Protection Agency
with EPA’s TSCA CBI Protection
Docket Center (EPA/DC), West William
Manual.
Jefferson Clinton Bldg., Rm. 3334, 1301
Access to TSCA data, including CBI,
Constitution Ave. NW, Washington, DC. will continue until May 20, 2024. If the
The Public Reading Room is open from
contract is extended, this access will
8:30 a.m. to 4:30 p.m., Monday through
also continue for the duration of the
Friday, excluding legal holidays. The
extended contract without further
telephone number for the Public
notice.
ERG personnel will be required to
Reading Room is (202) 566–1744, and
sign nondisclosure agreements and will
the telephone number for the OPPT
Docket is (202) 566–0280. Please review be briefed on appropriate security
PO 00000
Frm 00023
Fmt 4703
Sfmt 4703
E:\FR\FM\15SEN1.SGM
15SEN1
]]>Agencies
[Federal Register Volume 88, Number 178 (Friday, September 15, 2023)]
[Notices]
[Pages 63565-63572]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2023-20047]
=======================================================================
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2023-0061; FRL-10581-08-OCSPP]
Certain New Chemicals; Receipt and Status Information for August
2023
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg Chemical Safety for the 21st
Century Act, to make information publicly available and to publish
information in the Federal Register pertaining to submissions under
TSCA section 5, including notice of receipt of a Premanufacture notice
(PMN), Significant New Use Notice (SNUN) or Microbial Commercial
Activity Notice (MCAN), including an amended notice or test
information; an exemption application (Biotech exemption); an
application for a test marketing exemption (TME), both pending and/or
concluded; a notice of commencement (NOC) of manufacture (including
import) for new chemical substances; and a periodic status report on
new chemical substances that are currently under EPA review or have
recently concluded review. This document covers the period from 8/1/
2023 to 8/31/2023.
DATES: Comments identified by the specific case number provided in this
document must be received on or before October 16, 2023.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2023-0061, through the Federal eRulemaking
Portal at https://www.regulations.gov. Follow the online instructions
for submitting comments. Do not submit electronically any information
you consider to be Confidential Business Information (CBI) or other
information whose disclosure is restricted by statute. Additional
instructions on commenting and visiting the docket, along with more
information about dockets generally, is available at https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim Rahai, Project Management
and Operations Division (MC 7407M), Office of Pollution Prevention and
Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW,
Washington, DC 20460-0001; telephone number: (202) 564-8593; email
address: [email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt and status reports for the
period from 8/01/2023 to 8/31/2023. The Agency is providing notice of
receipt of PMNs, SNUNs, and MCANs (including amended notices and test
information); an exemption application under 40 CFR part 725 (Biotech
exemption); TMEs, both pending and/or concluded; NOCs to manufacture a
new chemical substance; and a periodic status report on new chemical
substances that are currently under EPA review or have recently
concluded review.
EPA is also providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
B. What is the Agency's authority for taking this action?
Under the Toxic Substances Control Act (TSCA), 15 U.S.C. 2601 et
seq., a chemical substance may be either an ``existing'' chemical
substance or a ``new'' chemical substance. Any chemical substance that
is not on EPA's TSCA Inventory of Chemical Substances (TSCA Inventory)
is classified as a ``new chemical substance,'' while a chemical
substance that is listed on the TSCA Inventory is classified as an
``existing chemical substance.'' (See TSCA section 3(11).) For more
information about the TSCA Inventory please go to: https://www.epa.gov/tsca-inventory.
Any person who intends to manufacture (including import) a new
chemical substance for a non-exempt commercial purpose, or to
manufacture or process a chemical substance in a non-exempt manner for
a use that EPA has determined is a significant new use, is required by
TSCA section 5 to provide EPA with a PMN, MCAN, or SNUN, as
appropriate, before initiating the activity. EPA will review the
notice, make a risk determination on the chemical substance or
significant new use, and take appropriate action as described in TSCA
section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to allow persons, upon
application and under appropriate restrictions, to manufacture or
process a new chemical substance, or a chemical substance subject to a
significant new use rule (SNUR) issued under TSCA section 5(a)(2), for
``test marketing'' purposes, upon a showing that the manufacture,
processing, distribution in commerce, use, and disposal of the chemical
will not present an unreasonable risk of injury to health or the
environment. This is referred to as a test marketing exemption, or TME.
For more information about the requirements applicable to a new
chemical go to: https://www.epa.gov/chemicals-under-tsca.
Under TSCA sections 5 and 8 and EPA regulations, EPA is required to
publish in the Federal Register certain information, including notice
of receipt of a PMN/SNUN/MCAN (including amended notices and test
information); an exemption application under 40 CFR part 725 (biotech
exemption); an application for a TME, both pending and concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on the new chemical substances that are currently under EPA review or
have recently concluded review.
[[Page 63566]]
C. Does this action apply to me?
This action provides information that is directed to the public in
general.
D. Does this action have any incremental economic impacts or paperwork
burdens?
No.
E. What should I consider as I prepare my comments for EPA?
1. Submitting confidential business information (CBI). Do not
submit this information to EPA through regulations.gov or email.
Clearly mark the part or all of the information that you claim to be
CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark
the outside of the disk or CD-ROM as CBI and then identify
electronically within the disk or CD-ROM the specific information that
is claimed as CBI. In addition to one complete version of the comment
that includes information claimed as CBI, a copy of the comment that
does not contain the information claimed as CBI must be submitted for
inclusion in the public docket. Information so marked will not be
disclosed except in accordance with procedures set forth in 40 CFR part
2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/commenting-epa-dockets.
II. Status Reports
In the past, EPA has published individual notices reflecting the
status of TSCA section 5 filings received, pending or concluded. In
1995, the Agency modified its approach and streamlined the information
published in the Federal Register after providing notice of such
changes to the public and an opportunity to comment (see the Federal
Register of May 12, 1995 (60 FR 25798) (FRL-4942-7)). Since the passage
of the Lautenberg amendments to TSCA in 2016, public interest in
information on the status of section 5 cases under EPA review and, in
particular, the final determination of such cases, has increased. In an
effort to be responsive to the regulated community, the users of this
information, and the general public, to comply with the requirements of
TSCA, to conserve EPA resources and to streamline the process and make
it more timely, EPA is providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that have passed an initial screening by EPA
during this period, Table I provides the following information (to the
extent that such information is not subject to a CBI claim) on the
notices screened by EPA during this period: The EPA case number
assigned to the notice that indicates whether the submission is an
initial submission, or an amendment, a notation of which version was
received, the date the notice was received by EPA, the submitting
manufacturer (i.e., domestic producer or importer), the potential uses
identified by the manufacturer in the notice, and the chemical
substance identity.
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that this information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI. Submissions which are initial submissions
will not have a letter following the case number. Submissions which are
amendments to previous submissions will have a case number followed by
the letter ``A'' (e.g. P-18-1234A). The version column designates
submissions in sequence as ``1'', ``2'', ``3'', etc. Note that in some
cases, an initial submission is not numbered as version 1; this is
because earlier version(s) were rejected as incomplete or invalid
submissions. Note also that future versions of the following tables may
adjust slightly as the Agency works to automate population of the data
in the tables.
Table I--PMN/SNUN/MCANs Approved * From 08/01/2023 to 08/31/2023
----------------------------------------------------------------------------------------------------------------
Case No. Version Received date Manufacturer Use Chemical substance
----------------------------------------------------------------------------------------------------------------
P-18-0346A............. 5 07/25/2023 Chitec Technology (S) Antioxidant (S) 2,4,8,10-
Co., Ltd. compounded into Tetraoxa-3,9-
various polymers diphosphaspiro[5.5]
to be used in undecane, 3,9-bis-
extrusion [2-(1-methyl-1-
processes to phenylethyl)-4-
fabricate (1,1,3,3-
articles. tetramethylbutyl)ph
enoxy]-.
P-20-0031A............. 6 08/16/2023 CBI............... (G) Intermediate.. (G) Perfluorinated
substituted 1,3-
oxathiolane
dioxide.
P-20-0031A............. 7 08/21/2023 CBI............... (G) Intermediate.. (G) Perfluorinated
substituted 1,3-
oxathiolane
dioxide.
P-20-0033A............. 4 08/16/2023 CBI............... (G) Intermediate.. (G) Perfluorinated
vinyl haloalkane
sulfonate salt.
P-20-0033A............. 5 08/21/2023 CBI............... (G) Intermediate.. (G) Perfluorinated
vinyl haloalkane
sulfonate salt.
P-20-0034A............. 4 08/16/2023 CBI............... (G) Intermediate.. (G) Perfluorinated
vinyl haloalkane
sulfonyl halide.
P-20-0034A............. 5 08/21/2023 CBI............... (G) Intermediate.. (G) Perfluorinated
vinyl haloalkane
sulfonyl halide.
P-21-0143A............. 3 08/04/2023 CBI............... (G) Coating (G) Aliphatic
ingredient, Diisocyanate,
adhesive homopolymer,
ingredient. aliphatic alcohol
blocked.
P-21-0151A............. 3 08/16/2023 CBI............... (G) Polyurethane (G) Epoxidized
applications. Vegetable oil,
polymer with
bisphenol A, aryl
glycidyl ether,
epichlorohydrin,
polyethylene glycol
and
trimethylolpropane.
P-22-0040A............. 3 08/27/2023 CBI............... (G) Component used (S) Manganate(4-),
in manufacture of hexakis(cyano-
high-performance .kappa.C)-,
batteries. manganese (2+)
sodium, (OC-6-11)-.
P-22-0041A............. 3 08/27/2023 CBI............... (G) A component (S) Ferrate (-4),
used in the hexakis(cyano-
manufacture of .kappa.C)-,
batteries. iron(3+)
manganese(2+)
sodium, (OC-6-11)-.
[[Page 63567]]
P-22-0053A............. 5 08/07/2023 CBI............... (G) additive in (S) Ethanol, 2-amino-
agricultural , compds. with
formulations. polyethylene glycol
hydrogen sulfate
C10-16-alkyl ether.
P-22-0058A............. 4 08/24/2023 Solvay Fluorides, (G) Process (S)
LLC. chemical. Methanesulfonamide,
1,1,1-trifluoro-N-
[(trifluoromethyl)s
ulfonyl]-, sodium
salt (1:1).
P-23-0099.............. 4 08/30/2023 CBI............... (G) PIR and PUR (G) Derivatives of
rigid insulation fats and oils,
materials. plant based,
polycyclic acids
functionalized,
aromatic acids,
polyester with
diols and triols.
P-23-0107A............. 6 08/02/2023 Cnano Technology (S) Lithium-Ion (S) Multiwalled
USA, Inc. Battery Carbon Nanotube.
Conductive Agent,
Liquid Products
Containing MWCNT
as a semi
conductive
enhancer,
chemical carrier,
reflectivity
reducer and
anticorrosion/
antifouling
stimulant, Solid
Products
Containing MWCNT
as a structural
reinforcement,
conductive
stabilizer,
composite &
tensile strength
enhancer and heat
conductor.
P-23-0107A............. 7 08/08/2023 Cnano Technology (S) Lithium-Ion (S) Multiwalled
USA, Inc. Battery Carbon Nanotube.
Conductive Agent,
Liquid Products
Containing MWCNT
as a semi
conductive
enhancer,
chemical carrier,
reflectivity
reducer and
anticorrosion/
antifouling
stimulant, Solid
Products
Containing MWCNT
as a structural
reinforcement,
conductive
stabilizer,
composite &
tensile strength
enhancer and heat
conductor.
P-23-0107A............. 8 08/08/2023 Cnano Technology (S) Lithium-Ion (S) Multiwalled
USA, Inc. Battery Carbon Nanotube.
Conductive Agent,
Liquid Products
Containing MWCNT
as a semi
conductive
enhancer,
chemical carrier,
reflectivity
reducer and
anticorrosion/
antifouling
stimulant, Solid
Products
Containing MWCNT
as a structural
reinforcement,
conductive
stabilizer,
composite &
tensile strength
enhancer and heat
conductor.
P-23-0108A............. 6 08/02/2023 Cnano Technology (S) Lithium-Ion (S) Multiwalled
USA, Inc. Battery Carbon Nanotube.
Conductive Agent,
Liquid Products
Containing MWCNT
as a semi
conductive
enhancer,
chemical carrier,
reflectivity
reducer and
anticorrosion/
antifouling
stimulant, Solid
Products
Containing MWCNT
as a structural
reinforcement,
conductive
stabilizer,
composite &
tensile strength
enhancer and heat
conductor.
P-23-0108A............. 7 08/08/2023 Cnano Technology (S) Lithium-Ion (S) Multiwalled
USA, Inc. Battery Carbon Nanotube.
Conductive Agent,
Liquid Products
Containing MWCNT
as a semi
conductive
enhancer,
chemical carrier,
reflectivity
reducer and
anticorrosion/
antifouling
stimulant, Solid
Products
Containing MWCNT
as a structural
reinforcement,
conductive
stabilizer,
composite &
tensile strength
enhancer and heat
conductor.
P-23-0108A............. 8 08/08/2023 Cnano Technology (S) Lithium-Ion (S) Multiwalled
USA, Inc. Battery Carbon Nanotube.
Conductive Agent,
Liquid Products
Containing MWCNT
as a semi
conductive
enhancer,
chemical carrier,
reflectivity
reducer and
anticorrosion/
antifouling
stimulant, Solid
Products
Containing MWCNT
as a structural
reinforcement,
conductive
stabilizer,
composite &
tensile strength
enhancer and heat
conductor.
P-23-0109A............. 5 08/02/2023 Cnano Technology (S) Lithium-Ion (S) Multiwalled
USA, Inc. Battery Carbon Nanotube.
Conductive Agent,
Liquid Products
Containing MWCNT
as a semi
conductive
enhancer,
chemical carrier,
reflectivity
reducer and
anticorrosion/
antifouling
stimulant, Solid
Products
Containing MWCNT
as a structural
reinforcement,
conductive
stabilizer,
composite &
tensile strength
enhancer and heat
conductor.
[[Page 63568]]
P-23-0109A............. 6 08/08/2023 Cnano Technology (S) Lithium-Ion (S) Multiwalled
USA, Inc. Battery Carbon Nanotube.
Conductive Agent,
Liquid Products
Containing MWCNT
as a semi
conductive
enhancer,
chemical carrier,
reflectivity
reducer and
anticorrosion/
antifouling
stimulant, Solid
Products
Containing MWCNT
as a structural
reinforcement,
conductive
stabilizer,
composite &
tensile strength
enhancer and heat
conductor.
P-23-0109A............. 7 08/08/2023 Cnano Technology (S) Lithium-Ion (S) Multiwalled
USA, Inc. Battery Carbon Nanotube.
Conductive Agent,
Liquid Products
Containing MWCNT
as a semi
conductive
enhancer,
chemical carrier,
reflectivity
reducer and
anticorrosion/
antifouling
stimulant, Solid
Products
Containing MWCNT
as a structural
reinforcement,
conductive
stabilizer,
composite &
tensile strength
enhancer and heat
conductor.
P-23-0110A............. 5 08/02/2023 Cnano Technology (S) Lithium-Ion (S) Multiwalled
USA, Inc. Battery Carbon Nanotube.
Conductive Agent,
Liquid Products
Containing MWCNT
as a semi
conductive
enhancer,
chemical carrier,
reflectivity
reducer and
anticorrosion/
antifouling
stimulant, Solid
Products
Containing MWCNT
as a structural
reinforcement,
conductive
stabilizer,
composite &
tensile strength
enhancer and heat
conductor.
P-23-0110A............. 6 08/08/2023 Cnano Technology (S) Lithium-Ion (S) Multiwalled
USA, Inc. Battery Carbon Nanotube.
Conductive Agent,
Liquid Products
Containing MWCNT
as a semi
conductive
enhancer,
chemical carrier,
reflectivity
reducer and
anticorrosion/
antifouling
stimulant, Solid
Products
Containing MWCNT
as a structural
reinforcement,
conductive
stabilizer,
composite &
tensile strength
enhancer and heat
conductor.
P-23-0110A............. 7 08/08/2023 Cnano Technology (S) Lithium-Ion (S) Multiwalled
USA, Inc. Battery Carbon Nanotube.
Conductive Agent,
Liquid Products
Containing MWCNT
as a semi
conductive
enhancer,
chemical carrier,
reflectivity
reducer and
anticorrosion/
antifouling
stimulant, Solid
Products
Containing MWCNT
as a structural
reinforcement,
conductive
stabilizer,
composite &
tensile strength
enhancer and heat
conductor.
P-23-0111A............. 6 08/02/2023 Cnano Technology (S) Lithium-Ion (S) Multiwalled
USA, Inc. Battery Carbon Nanotube.
Conductive Agent
(Precursor),
Liquid Products
Containing MWCNT
as a semi
conductive
enhancer,
chemical carrier,
reflectivity
reducer and
anticorrosion/
antifouling
stimulant, Solid
Products
Containing MWCNT
as a structural
reinforcement,
conductive
stabilizer,
composite &
tensile strength
enhancer and heat
conductor.
P-23-0111A............. 7 08/08/2023 Cnano Technology (S) Lithium-Ion (S) Multiwalled
USA, Inc. Battery Carbon Nanotube.
Conductive Agent
(Precursor),
Liquid Products
Containing MWCNT
as a semi
conductive
enhancer,
chemical carrier,
reflectivity
reducer and
anticorrosion/
antifouling
stimulant, Solid
Products
Containing MWCNT
as a structural
reinforcement,
conductive
stabilizer,
composite &
tensile strength
enhancer and heat
conductor.
[[Page 63569]]
P-23-0112A............. 6 08/02/2023 Cnano Technology (S) Lithium-Ion (S) Multiwalled
USA, Inc. Battery Carbon Nanotube.
Conductive Agent,
Liquid Products
Containing MWCNT
as a semi
conductive
enhancer,
chemical carrier,
reflectivity
reducer and
anticorrosion/
antifouling
stimulant, Solid
Products
Containing MWCNT
as a structural
reinforcement,
conductive
stabilizer,
composite &
tensile strength
enhancer and heat
conductor.
P-23-0112A............. 7 08/08/2023 Cnano Technology (S) Lithium-Ion (S) Multiwalled
USA, Inc. Battery Carbon Nanotube.
Conductive Agent,
Liquid Products
Containing MWCNT
as a semi
conductive
enhancer,
chemical carrier,
reflectivity
reducer and
anticorrosion/
antifouling
stimulant, Solid
Products
Containing MWCNT
as a structural
reinforcement,
conductive
stabilizer,
composite &
tensile strength
enhancer and heat
conductor.
P-23-0113A............. 6 08/02/2023 Cnano Technology (S) Lithium-Ion (S) Multiwalled
USA, Inc. Battery Carbon Nanotube.
Conductive Agent,
Liquid Products
Containing MWCNT
as a semi
conductive
enhancer,
chemical carrier,
reflectivity
reducer and
anticorrosion/
antifouling
stimulant, Solid
Products
Containing MWCNT
as a structural
reinforcement,
conductive
stabilizer,
composite &
tensile strength
enhancer and heat
conductor.
P-23-0113A............. 7 08/08/2023 Cnano Technology (S) Lithium-Ion (S) Multiwalled
USA, Inc. Battery Carbon Nanotube.
Conductive Agent,
Liquid Products
Containing MWCNT
as a semi
conductive
enhancer,
chemical carrier,
reflectivity
reducer and
anticorrosion/
antifouling
stimulant, Solid
Products
Containing MWCNT
as a structural
reinforcement,
conductive
stabilizer,
composite &
tensile strength
enhancer and heat
conductor.
P-23-0114A............. 5 08/02/2023 Cnano Technology (S) Lithium-Ion (S) Multiwalled
USA, Inc. Battery Carbon Nanotube.
Conductive Agent
(Precursor),
Liquid Products
Containing MWCNT
as a semi
conductive
enhancer,
chemical carrier,
reflectivity
reducer and
anticorrosion/
antifouling
stimulant, Solid
Products
Containing MWCNT
as a structural
reinforcement,
conductive
stabilizer,
composite &
tensile strength
enhancer and heat
conductor.
P-23-0114A............. 6 08/08/2023 Cnano Technology (S) Lithium-Ion (S) Multiwalled
USA, Inc. Battery Carbon Nanotube.
Conductive Agent
(Precursor),
Liquid Products
Containing MWCNT
as a semi
conductive
enhancer,
chemical carrier,
reflectivity
reducer and
anticorrosion/
antifouling
stimulant, Solid
Products
Containing MWCNT
as a structural
reinforcement,
conductive
stabilizer,
composite &
tensile strength
enhancer and heat
conductor.
P-23-0115A............. 5 08/02/2023 Cnano Technology (S) Lithium-Ion (S) Multiwalled
USA, Inc. Battery Carbon Nanotube.
Conductive Agent
(Precursor),
Liquid Products
Containing MWCNT
as a semi
conductive
enhancer,
chemical carrier,
reflectivity
reducer and
anticorrosion/
antifouling
stimulant, Solid
Products
Containing MWCNT
as a structural
reinforcement,
conductive
stabilizer,
composite &
tensile strength
enhancer and heat
conductor.
[[Page 63570]]
P-23-0115A............. 6 08/08/2023 Cnano Technology (S) Liquid (S) Multiwalled
USA, Inc. Products Carbon Nanotube.
Containing MWCNT
as a semi
conductive
enhancer,
chemical carrier,
reflectivity
reducer and
anticorrosion/
antifouling
stimulant, Solid
Products
Containing MWCNT
as a structural
reinforcement,
conductive
stabilizer,
composite &
tensile strength
enhancer and heat
conductor,
Lithium-Ion
Battery
Conductive Agent
(Precursor).
P-23-0116A............. 5 08/02/2023 Cnano Technology (S) Lithium-Ion (S) Multiwalled
USA, Inc. Battery Carbon Nanotube.
Conductive Agent,
Liquid Products
Containing MWCNT
as a semi
conductive
enhancer,
chemical carrier,
reflectivity
reducer and
anticorrosion/
antifouling
stimulant, Solid
Products
Containing MWCNT
as a structural
reinforcement,
conductive
stabilizer,
composite &
tensile strength
enhancer and heat
conductor.
P-23-0116A............. 6 08/08/2023 Cnano Technology (S) Lithium-Ion (S) Multiwalled
USA, Inc. Battery Carbon Nanotube.
Conductive Agent,
Liquid Products
Containing MWCNT
as a semi
conductive
enhancer,
chemical carrier,
reflectivity
reducer and
anticorrosion/
antifouling
stimulant, Solid
Products
Containing MWCNT
as a structural
reinforcement,
conductive
stabilizer,
composite &
tensile strength
enhancer and heat
conductor.
P-23-0129A............. 6 08/01/2023 Polymer Additives, (G) Intermediate.. (G) Benzyl fatty
Inc. acid esters.
P-23-0129A............. 7 08/03/2023 Polymer Additives, (G) Intermediate.. (G) Benzyl fatty
Inc. acid esters.
P-23-0130.............. 4 08/25/2023 CBI............... (G) Component in (G) Fatty Acids
asphalt. reaction products
with
polyalkylpolyamines
, salts.
P-23-0133A............. 4 08/25/2023 CBI............... (G) Component in (G) Fatty acids
asphalt. reaction products
with alcoholamine
reaction by-
products, salts.
P-23-0137.............. 3 08/21/2023 CBI............... (G) Polymerization (G) Methanone, [bis-
Catalyst. phenyl
phosphinyl](2,4,6-
trimethylphenyl)-.
P-23-0139.............. 3 08/02/2023 Polymer Additives, (S) Santicizer(R) (G) Benzyl fatty
Inc. Platinum G-3000 acid esters,
will be used as a epoxidized.
plasticizer for
polymers such as
PVC,
polyurethane, and
rubber. It helps
reduce glass
transition
temperature of
the polymer and
make the polymer
more flexible in
the end
applications.
P-23-0139A............. 4 08/03/2023 Polymer Additives, (S) Santicizer(R) (G) Benzyl fatty
Inc. Platinum G-3000 acid esters,
will be used as a epoxidized.
plasticizer for
polymers such as
PVC,
polyurethane, and
rubber. It helps
reduce glass
transition
temperature of
the polymer and
make the polymer
more flexible in
the end
applications.
P-23-0142A............. 2 08/28/2023 CBI............... (G) Destructive (G) Alkenal, 9-
use. (acetyloxy)-, (E)-.
P-23-0146.............. 2 08/10/2023 CBI............... (G) Lubricant (G) Urea, N,N``-
additive. (methylenedi-4,1-
phenylene)bis-,
N',N''-bis(mixed
cycloalkyl and
alkyl) derivs.
P-23-0150A............. 3 08/03/2023 CBI............... (G) Industrial use (G) Branched
for roll-on, Glycidyl Ester and
brushing, and Bisphenol Glycidyl
spray application. Ether polymer
adduct with Aralkyl
Diamine.
P-23-0154.............. 2 08/17/2023 RWDC Industries... (G) The primary (G) Vegetable oils,
application areas Cupriavidus-
for PHA are for fermented,
food packaging polyhydroxyalkanoat
and other uses e copolymer.
where its
biodegradable
properties
provide
nontraditional
end-of-use
options.
P-23-0157.............. 3 08/25/2023 CBI............... (G) Component in (G) Alkyl-diamine,
Asphalt. Fatty Acid Amides,
salts.
P-23-0158.............. 2 08/01/2023 Fujifilm (G) Photoacid (G)
Electronic generator (PAG). triarylsulfonium,
Materials USA, salt with
Inc. alkylperfluoro
sulfonylaminoalkylf
luoro
alkylpolyfluoroamid
e.
P-23-0159.............. 2 08/02/2023 Fujifilm (G) Photoacid (G)
Electronic Generator. triarylsulfonium,
Materials USA, salt with alkyl
Inc. polycycle ester of
alkylfluro
sulfocarboxylate.
P-23-0160.............. 1 07/31/2023 CBI............... (G) Destructive (G) Alkenoyl
use. chloride, 3-methyl-
.
P-23-0162.............. 3 08/23/2023 CBI............... (S) Transportation (G) Alkane
fuels, Chemical (glyceridic),
Feedstock, Fuel hydrotreated and
additive. isomerized.
P-23-0164.............. 1 08/11/2023 Shepherd Chemical. (S) Gelling (S) Bismuth,
catalyst for 1,1',1'',1''-(1,2-
polyurethanes. ethanediyldinitrilo
)tetrakis[2-
propanol] 2-(2-
ethoxyethoxy)ethano
l neodecanoate
polypropylene
glycol complexes.
P-23-0165.............. 3 08/22/2023 CBI............... (G) Production (G) 2,3,3,3-
aide for the tetrafluoro-2-
manufacturing of [(polyfluoroalken-1-
polymers. yl)oxy]-propanoic
acid homopolymer.
[[Page 63571]]
P-23-0166.............. 1 08/16/2023 CBI............... (G) Monomer for UV (G) Polypropylene
curable glycol
application. allyloxymethyl
acrylate.
P-23-0167.............. 2 08/30/2023 Central Glass (G) Battery (G) Bisalkyldiacid
International, production. fluorophosphate
Inc. salt.
P-23-0168.............. 2 08/29/2023 Central Glass (G) Battery (G) Sulfamoyl halide
International, production. fluorophosphate
Inc. salt.
P-23-0169.............. 1 08/22/2023 Gelest............ (G) Intermediate.. (G) Alkane,
bis(chlorosilane).
P-23-0170.............. 1 08/22/2023 CBI............... (G) Fuel additive. (G) Ethanaminium, 2-
[3-(2,5-dioxo-1-
heteromonocyclic)
propoxy]-N,N,N-
trimethyl-,
monopolyisobutylene
derivs., Me
ethanedioate.
P-23-0172.............. 1 08/28/2023 CBI............... (G) (G) Sulfonium,
Photolithography. tricarbocyclic-,
alkylcarbomocyclic-
polyfluoro-
heteropolycyclic-
alkyl sulfonate
(1:1), polymer with
alkylaryl and
carbomonocyclic
alkyl alkanoate, di-
Me 2,2'-(1,2-
diazenediyl)bis[2-
alkylalkanoate]-
initiated.
P-23-0173.............. 1 08/29/2023 CBI............... (G) Component used (G) Cellulose,
in battery alkoxyalkyl ether,
manufacturing. alkali metal salt.
P-23-0174.............. 1 08/30/2023 CBI............... (G) Component used (G) Mixed metal
in battery oxide.
manufacturing.
----------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
that have passed an initial screening by EPA during this period: The
EPA case number assigned to the NOC including whether the submission
was an initial or amended submission, the date the NOC was received by
EPA, the date of commencement provided by the submitter in the NOC, a
notation of the type of amendment (e.g., amendment to generic name,
specific name, technical contact information, etc.) and chemical
substance identity.
Table II--NOCs Approved * From 08/01/2023 to 08/31/2023
----------------------------------------------------------------------------------------------------------------
Commencement If amendment, type of
Case No. Received date date amendment Chemical substance
----------------------------------------------------------------------------------------------------------------
J-21-0013..................... 08/23/2023 08/12/2023 N (G) Yeast that has
been stably modified
for the production of
an agricultural
product.
P-12-0326..................... 08/10/2023 08/01/2023 N (G)
Dicyclohexylmethane-
4,4'-diisocyanate,
polymer with
ethoxylated,
propoxylated
polyethers.
P-12-0384..................... 08/10/2023 08/02/2023 N (G) Secondary amine-
terminated polyether
triol.
P-20-0056..................... 08/11/2023 07/12/2023 N (G) Phosphated acrylic
polymer.
P-20-0178..................... 08/21/2023 08/02/2023 N (G) Carbopolycyclic
alkenyl, 2-carboxylic
acid, 2-
[[[(diarylalkyl)]carb
onyl]oxy]ethyl ester.
P-21-0216..................... 08/17/2023 07/21/2023 N (G) Multi-walled
carbon nanotubes.
P-22-0034..................... 08/08/2023 07/31/2023 N (G) Alkylphosphonic
acid, disodium salt.
P-22-0069..................... 08/02/2023 07/03/2023 N (G) Fluorohetero acid,
metal salt.
P-22-0151..................... 08/29/2023 08/29/2023 N (G) Glycolipids,
sophorose-contg.,
starmerella bombicola
c18-unsatd.
glycerides and
carbohydrates.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission.
In Table III of this unit, EPA provides the following information
(to the extent such information is not subject to a CBI claim) on the
test information that has been received during this time period: The
EPA case number assigned to the test information; the date the test
information was received by EPA, the type of test information
submitted, and chemical substance identity.
[[Page 63572]]
Table III--Test Information Received From 08/01/2023 to 08/31/2023
----------------------------------------------------------------------------------------------------------------
Case No. Received date Type of test information Chemical substance
----------------------------------------------------------------------------------------------------------------
P-23-0170............................. 08/25/2023 Water Solubility: Column (G) Ethanaminium, 2-[3-
Elution Method; Shake Flask (2,5-dioxo-1-
Method (OECD Test Guideline heteromonocyclic)
105); Freshwater and propoxy]-n,n,n-
Saltwater Fish Acute Toxicity trimethyl-,
Test (OECD Test Guideline monopolyisobutylene
203); Estimation of the derivs., me
Adsorption Coefficient (Koc) ethanedioate.
on Soil and on Sewage Sludge
using High Performance Liquid
Chromatography (HPLC) (OECD
Test Guideline 121);
Partition Coefficient (n-
octanol/water), Estimation by
Liquid Chromatography (OECD
Test Guideline 117); Solution/
Extraction Behavior of
Polymers in Water (OECD Test
Guideline 120); Modified
Activated Sludge, Respiration
Inhibition Test (OCSPP Test
Guideline 795.1700); Fish,
Juvenile Growth Test (OECD
Test Guideline 215); Fish
Bioconcentration Factor (BCF)
(OECD Test Guideline 305);
Seed Germination/Root
Elongation Test Report;
Analytical Method Validation
Report; Repeat Dose 28-day
Oral Toxicity Study in
Rodents (OECD Test Guideline
407); Prenatal Development
Toxicity Study (OECD Test
Guideline 414); 90-day Oral
Toxicity in Rodents (OECD
Test Guideline 408).
----------------------------------------------------------------------------------------------------------------
If you are interested in information that is not included in these
tables, you may contact EPA's technical information contact or general
information contact as described under FOR FURTHER INFORMATION CONTACT
to access additional non-CBI information that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: September 12, 2023.
Pamela Myrick,
Director, Project Management and Operations Division, Office of
Pollution Prevention and Toxics.
[FR Doc. 2023-20047 Filed 9-14-23; 8:45 am]
BILLING CODE 6560-50-P
