Airworthiness Directives; The Boeing Company Airplanes, 52055-52057 [2023-16644]

Download as PDF 52055 Proposed Rules Federal Register Vol. 88, No. 150 Monday, August 7, 2023 This section of the FEDERAL REGISTER contains notices to the public of the proposed issuance of rules and regulations. The purpose of these notices is to give interested persons an opportunity to participate in the rule making prior to the adoption of the final rules. DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2023–1400; Project Identifier AD–2022–01374–T] RIN 2120–AA64 Airworthiness Directives; The Boeing Company Airplanes Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). AGENCY: The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 737–8 and 737–9 airplanes. This proposed AD was prompted by a determination that the loss of ground through the P6 panel results in the failure of the standby power control unit (SPCU). The loss of the SPCU and P6 would result in the loss of significant flight crew instrumentation and displays. This proposed AD would require installing two bonding jumpers from the P6 panel structure to primary structure. The FAA is proposing this AD to address the unsafe condition on these products. DATES: The FAA must receive comments on this proposed AD by September 21, 2023. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions for submitting comments. • Fax: 202–493–2251. • Mail: U.S. Department of Transportation, Docket Operations, M– 30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE, Washington, DC 20590. • Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. ddrumheller on DSK120RN23PROD with PROPOSALS1 SUMMARY: VerDate Sep<11>2014 17:11 Aug 04, 2023 Jkt 259001 AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA–2023–1400; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, any comments received, and other information. The street address for Docket Operations is listed above. Material Incorporated by Reference: • For service information identified in this NPRM, contact Boeing Commercial Airplanes, Attention: Contractual & Data Services (C&DS), 2600 Westminster Blvd., MC 110–SK57, Seal Beach, CA 90740–5600; telephone 562–797–1717; website myboeingfleet.com. • You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. It is also available at regulations.gov by searching for and locating Docket No. FAA–2023–1400. FOR FURTHER INFORMATION CONTACT: Hien T. Nguyen, Aviation Safety Engineer, FAA, 2200 South 216th St., Des Moines, WA 98198; phone: 206– 231–3977; email: Hien.T.Nguyen@ faa.gov. SUPPLEMENTARY INFORMATION: Comments Invited The FAA invites you to send any written relevant data, views, or arguments about this proposal. Send your comments to an address listed under ADDRESSES. Include ‘‘Docket No. FAA–2023–1400; Project Identifier AD– 2022–01374–T’’ at the beginning of your comments. The most helpful comments reference a specific portion of the proposal, explain the reason for any recommended change, and include supporting data. The FAA will consider all comments received by the closing date and may amend this proposal because of those comments. Except for Confidential Business Information (CBI) as described in the following paragraph, and other information as described in 14 CFR 11.35, the FAA will post all comments received, without change, to regulations.gov, including any personal information you provide. The agency will also post a report summarizing each PO 00000 Frm 00001 Fmt 4702 Sfmt 4702 substantive verbal contact received about this NPRM. Confidential Business Information CBI is commercial or financial information that is both customarily and actually treated as private by its owner. Under the Freedom of Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public disclosure. If your comments responsive to this NPRM contain commercial or financial information that is customarily treated as private, that you actually treat as private, and that is relevant or responsive to this NPRM, it is important that you clearly designate the submitted comments as CBI. Please mark each page of your submission containing CBI as ‘‘PROPIN.’’ The FAA will treat such marked submissions as confidential under the FOIA, and they will not be placed in the public docket of this NPRM. Submissions containing CBI should be sent to Hien T. Nguyen, Aviation Safety Engineer, FAA, 2200 South 216th St., Des Moines, WA 98198; phone: 206–231–3977; email: Hien.T.Nguyen@faa.gov. Any commentary that the FAA receives that is not specifically designated as CBI will be placed in the public docket for this rulemaking. Background The FAA has received a report indicating that the loss of a ground through the P6 panel results in the failure in the SPCU. The SPCU provides AC and DC electrical power in the event there is a loss of power provided by primary electrical sources. Currently, there is a single ground strap between the P6 structure and airplane primary structure. This design was carried over to the 737 MAX airplanes from the 737 NG airplanes. The SPCU tray on the 737 MAX airplanes has an inherent bond path through the P6 structure. However, the requirements for redundant grounds to the SPCU tray did not flow down to include redundant grounds through the P6 panel to airplane primary structure. During a bonding analysis, it was determined that separate redundant ground paths from the two ground blocks on the SPCU tray to airplane primary structure are required in order to prevent a single point of failure condition, which could result in a potentially confusing combination of flight deck effects and a combination of E:\FR\FM\07AUP1.SGM 07AUP1 52056 Federal Register / Vol. 88, No. 150 / Monday, August 7, 2023 / Proposed Rules lost functionality. This condition, if not addressed, would result in loss of significant flightcrew instrumentation and displays and may lead to loss of continued safe flight and landing (CSFL). FAA’s Determination The FAA is issuing this NPRM after determining that the unsafe condition described previously is likely to exist or develop on other products of the same type design. Related Service Information Under 1 CFR Part 51 The FAA reviewed Boeing Alert Requirements Bulletin 737–24A1248 RB, dated May 16, 2022. This service information specifies procedures to install new bonding jumpers from the P6 panel structure to the primary structure to provide a redundant ground path for the SPCU. This service information is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in ADDRESSES. Proposed AD Requirements in This NPRM This proposed AD would require accomplishing the actions specified in the service information already described, except for any differences identified as exceptions in the regulatory text of this proposed AD. For information on the procedures and compliance times, see this service information at regulations.gov under Docket No. FAA–2023–1400. Costs of Compliance The FAA estimates that this AD, if adopted as proposed, would affect 79 airplanes of U.S. registry. The FAA estimates the following costs to comply with this proposed AD: ESTIMATED COSTS Action Labor cost Parts cost Cost per product Cost on U.S. operators Install two bonding jumpers .... 3 work-hour × $85 per hour = $255 ....................................... $180 $435 $34,365 Authority for This Rulemaking Title 49 of the United States Code specifies the FAA’s authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency’s authority. The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action. ddrumheller on DSK120RN23PROD with PROPOSALS1 The FAA determined that this proposed AD would not have federalism implications under Executive Order 13132. This proposed AD would not have a substantial direct effect on the States, on the relationship between the national Government and the States, or on the distribution of power and responsibilities among the various levels of government. For the reasons discussed above, I certify this proposed regulation: (1) Is not a ‘‘significant regulatory action’’ under Executive Order 12866, (2) Would not affect intrastate aviation in Alaska, and 17:11 Aug 04, 2023 Boeing Alert Requirements Bulletin 737– 24A1248 RB, dated May 16, 2022. List of Subjects in 14 CFR Part 39 (e) Unsafe Condition This AD was prompted by a determination that the loss of ground through the P6 panel results in the failure of the standby power control unit (SPCU). The loss of the SPCU and P6 would result in the loss of significant flight crew instrumentation and displays. It was determined that separate redundant ground paths from the two ground blocks on the SPCU tray to airplane primary structure are required in order to prevent a single point of failure condition. The FAA is issuing this AD to address loss of the SPCU and P6 panel. The unsafe condition, if not addressed, would result in the loss of significant flightcrew instruments and displays, and may lead to loss of continued safe flight and landing. Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety. The Proposed Amendment Accordingly, under the authority delegated to me by the Administrator, the FAA proposes to amend 14 CFR part 39 as follows: PART 39—AIRWORTHINESS DIRECTIVES 1. The authority citation for part 39 continues to read as follows: ■ Authority: 49 U.S.C. 106(g), 40113, 44701. § 39.13 [Amended] 2. The FAA amends § 39.13 by adding the following new airworthiness directive: ■ Regulatory Findings VerDate Sep<11>2014 (3) Would not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. Jkt 259001 The Boeing Company: Docket No. FAA– 2023–1400; Project Identifier AD–2022– 01374–T. (a) Comments Due Date The FAA must receive comments on this airworthiness directive (AD) by September 21, 2023. (b) Affected ADs None. (c) Applicability This AD applies to The Boeing Company Model 737–8 and 737–9 airplanes, certificated in any category, as identified in PO 00000 Frm 00002 Fmt 4702 Sfmt 4702 (d) Subject Air Transport Association (ATA) of America Code 24, Electrical Power. (f) Compliance Comply with this AD within the compliance times specified, unless already done. (g) Required Actions Except as specified by paragraph (h) of this AD: At the applicable times specified in the ‘‘Compliance’’ paragraph of Boeing Alert Requirements Bulletin 737–24A1248 RB, dated May 16, 2022, do all applicable actions identified in, and in accordance with, the Accomplishment Instructions of Boeing Alert Requirements Bulletin 737–24A1248 RB, dated May 16, 2022. Note 1 to paragraph (g): Guidance for accomplishing the actions required by this AD can be found in Boeing Alert Service Bulletin 737–24A1248, dated May 16, 2022, which is referred to in Boeing Alert Requirements Bulletin 737–24A1248 RB, dated May 16, 2022. E:\FR\FM\07AUP1.SGM 07AUP1 Federal Register / Vol. 88, No. 150 / Monday, August 7, 2023 / Proposed Rules (h) Exceptions to Service Information Specifications Where the Compliance Time column of the table in the ‘‘Compliance’’ paragraph of Boeing Alert Requirements Bulletin 737– 24A1248 RB, dated May 16, 2022, uses the phrase ‘‘the original issue date of Requirements Bulletin 737–24A1248 RB,’’ this AD requires using ‘‘the effective date of this AD.’’ (i) Alternative Methods of Compliance (AMOCs) (1) The Manager, AIR–520 Continued Operational Safety Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the manager of the certification office, send it to the attention of the person identified in paragraph (j) of this AD. Information may be emailed to: 9-ANMSeattle-ACO-AMOC-Requests@faa.gov. (2) Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office. (3) An AMOC that provides an acceptable level of safety may be used for any repair, modification, or alteration required by this AD if it is approved by The Boeing Company Organization Designation Authorization (ODA) that has been authorized by the Manager, AIR–520 Continued Operational Safety Branch, FAA, to make those findings. To be approved, the repair method, modification deviation, or alteration deviation must meet the certification basis of the airplane, and the approval must specifically refer to this AD. ddrumheller on DSK120RN23PROD with PROPOSALS1 (j) Related Information (1) For more information about this AD, contact Hien T. Nguyen, Aviation Safety Engineer, FAA, 2200 South 216th St., Des Moines, WA 98198; phone: 206–231–3977; email: Hien.T.Nguyen@faa.gov. (2) Service information identified in this AD that is not incorporated by reference is available at the addresses specified in paragraphs (k)(3) and (4) of this AD. 17:11 Aug 04, 2023 Jkt 259001 Issued on July 31, 2023. Victor Wicklund, Deputy Director, Compliance & Airworthiness Division, Aircraft Certification Service. [FR Doc. 2023–16644 Filed 8–4–23; 8:45 am] BILLING CODE 4910–13–P DEPARTMENT OF THE TREASURY Internal Revenue Service 26 CFR Parts 1, 5, 301, and 602 [REG–134420–10] RIN 1545–BJ87 Revising Consolidated Return Regulations To Reflect Statutory Changes, Modernize Language, and Enhance Clarity Internal Revenue Service (IRS), Treasury. ACTION: Notice of proposed rulemaking; withdrawal of notices of proposed rulemaking; partial withdrawal of notices of proposed rulemaking; and proposed withdrawal of temporary regulations. AGENCY: This document contains proposed amendments to regulations applicable to affiliated groups of corporations that file consolidated Federal income tax returns. The proposed regulations would modify those regulations to reflect statutory changes, update language to remove antiquated or regressive terminology, and enhance clarity. Additionally, this document partially or completely withdraws certain notices of proposed rulemaking and proposes to withdraw certain temporary regulations. The proposed regulations would affect corporations filing consolidated returns. DATES: As of August 7, 2023, the notices of proposed rulemaking published on November 14, 2001 (66 FR 57021), March 12, 2002 (67 FR 11070), May 31, 2002 (67 FR 38039), May 31, 2002 (67 FR 38040), March 14, 2003 (68 FR 12324), May 7, 2003 (68 FR 24404), March 18, 2004 (69 FR 12811), August 18, 2004 (69 FR 51209), August 26, 2004 (69 FR 52462), April 10, 2007 (72 FR 17814), and June 23, 2010 (75 FR 35710) SUMMARY: (k) Material Incorporated by Reference (1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51. (2) You must use this service information as applicable to do the actions required by this AD, unless the AD specifies otherwise. (i) Boeing Alert Requirements Bulletin 737–24A1248 RB, dated May 16, 2022. (ii) [Reserved] (3) For service information identified in this AD, contact Boeing Commercial Airplanes, Attention: Contractual & Data Services (C&DS), 2600 Westminster Blvd., MC 110–SK57, Seal Beach, CA 90740–5600; telephone 562–797–1717; website myboeingfleet.com. (4) You may view this service information at the FAA, Airworthiness Products Section, VerDate Sep<11>2014 Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. (5) You may view this service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, fr.inspection@nara.gov, or go to: www.archives.gov/federal-register/cfr/ibrlocations.html. PO 00000 Frm 00003 Fmt 4702 Sfmt 4702 52057 are withdrawn. As of August 7, 2023, the notices of proposed rulemaking published on December 30, 1992 (57 FR 62251–01), March 18, 2004 (69 FR 12281), and June 11, 2015 (80 FR 33211) are partially withdrawn (see SUPPLEMENTARY INFORMATION for specific details). Written or electronic comments as well as requests for a public hearing must be received by November 6, 2023. Requests for a public hearing must be submitted as prescribed in the ‘‘Comments and Requests for a Public Hearing’’ section. ADDRESSES: Commenters are strongly encouraged to submit public comments electronically. Submit electronic submissions via the Federal eRulemaking Portal at https:// www.regulations.gov (indicate IRS and REG–134420–10). Once submitted to the Federal eRulemaking Portal, comments cannot be edited or withdrawn. The Department of the Treasury (Treasury Department) and the IRS will publish for public availability any comment submitted to its public docket. Send paper submissions to: CC:PA:LPD:PR (REG–134420–10), Room 5203, Internal Revenue Service, P.O. Box 7604, Ben Franklin Station, Washington, DC 20044. FOR FURTHER INFORMATION CONTACT: Concerning the proposed regulations, William W. Burhop at (202) 317–5363 or Kelton P. Frye at (202) 317–5135 (not toll-free numbers); concerning the submission of comments and/or requests for a public hearing, Vivian Hayes by email at publichearings@ irs.gov or by phone at (202) 317–5306 (not a toll-free number). SUPPLEMENTARY INFORMATION: Background This notice of proposed rulemaking (NPRM) contains proposed regulations under sections 1502, 1503, 1552, and 1563 of the Internal Revenue Code of 1986 (Code). These proposed regulations primarily would revise the Income Tax Regulations (26 CFR part 1) under section 1502 (consolidated return regulations). Section 1502 authorizes the Secretary of the Treasury or the Secretary’s delegate (Secretary) to prescribe consolidated return regulations for an affiliated group of corporations that join in filing (or that are required to join in filing) a consolidated return (consolidated group) to clearly reflect the Federal income tax liability of the consolidated group and to prevent avoidance of such tax liability. See § 1.1502–1(h) (defining the term ‘‘consolidated group’’). For purposes of carrying out those objectives, section 1502 also permits the E:\FR\FM\07AUP1.SGM 07AUP1

Agencies

[Federal Register Volume 88, Number 150 (Monday, August 7, 2023)]
[Proposed Rules]
[Pages 52055-52057]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2023-16644]


========================================================================
Proposed Rules
                                                Federal Register
________________________________________________________________________

This section of the FEDERAL REGISTER contains notices to the public of 
the proposed issuance of rules and regulations. The purpose of these 
notices is to give interested persons an opportunity to participate in 
the rule making prior to the adoption of the final rules.

========================================================================


Federal Register / Vol. 88 , No. 150 / Monday, August 7, 2023 / 
Proposed Rules

[[Page 52055]]



DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2023-1400; Project Identifier AD-2022-01374-T]
RIN 2120-AA64


Airworthiness Directives; The Boeing Company Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Notice of proposed rulemaking (NPRM).

-----------------------------------------------------------------------

SUMMARY: The FAA proposes to adopt a new airworthiness directive (AD) 
for certain The Boeing Company Model 737-8 and 737-9 airplanes. This 
proposed AD was prompted by a determination that the loss of ground 
through the P6 panel results in the failure of the standby power 
control unit (SPCU). The loss of the SPCU and P6 would result in the 
loss of significant flight crew instrumentation and displays. This 
proposed AD would require installing two bonding jumpers from the P6 
panel structure to primary structure. The FAA is proposing this AD to 
address the unsafe condition on these products.

DATES: The FAA must receive comments on this proposed AD by September 
21, 2023.

ADDRESSES: You may send comments, using the procedures found in 14 CFR 
11.43 and 11.45, by any of the following methods:
     Federal eRulemaking Portal: Go to regulations.gov. Follow 
the instructions for submitting comments.
     Fax: 202-493-2251.
     Mail: U.S. Department of Transportation, Docket 
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New 
Jersey Avenue SE, Washington, DC 20590.
     Hand Delivery: Deliver to Mail address above between 9 
a.m. and 5 p.m., Monday through Friday, except Federal holidays.
    AD Docket: You may examine the AD docket at regulations.gov under 
Docket No. FAA-2023-1400; or in person at Docket Operations between 9 
a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD 
docket contains this NPRM, any comments received, and other 
information. The street address for Docket Operations is listed above.
    Material Incorporated by Reference:
     For service information identified in this NPRM, contact 
Boeing Commercial Airplanes, Attention: Contractual & Data Services 
(C&DS), 2600 Westminster Blvd., MC 110-SK57, Seal Beach, CA 90740-5600; 
telephone 562-797-1717; website myboeingfleet.com.
     You may view this service information at the FAA, 
Airworthiness Products Section, Operational Safety Branch, 2200 South 
216th St., Des Moines, WA. For information on the availability of this 
material at the FAA, call 206-231-3195. It is also available at 
regulations.gov by searching for and locating Docket No. FAA-2023-1400.

FOR FURTHER INFORMATION CONTACT: Hien T. Nguyen, Aviation Safety 
Engineer, FAA, 2200 South 216th St., Des Moines, WA 98198; phone: 206-
231-3977; email: [email protected].

SUPPLEMENTARY INFORMATION: 

Comments Invited

    The FAA invites you to send any written relevant data, views, or 
arguments about this proposal. Send your comments to an address listed 
under ADDRESSES. Include ``Docket No. FAA-2023-1400; Project Identifier 
AD-2022-01374-T'' at the beginning of your comments. The most helpful 
comments reference a specific portion of the proposal, explain the 
reason for any recommended change, and include supporting data. The FAA 
will consider all comments received by the closing date and may amend 
this proposal because of those comments.
    Except for Confidential Business Information (CBI) as described in 
the following paragraph, and other information as described in 14 CFR 
11.35, the FAA will post all comments received, without change, to 
regulations.gov, including any personal information you provide. The 
agency will also post a report summarizing each substantive verbal 
contact received about this NPRM.

Confidential Business Information

    CBI is commercial or financial information that is both customarily 
and actually treated as private by its owner. Under the Freedom of 
Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public 
disclosure. If your comments responsive to this NPRM contain commercial 
or financial information that is customarily treated as private, that 
you actually treat as private, and that is relevant or responsive to 
this NPRM, it is important that you clearly designate the submitted 
comments as CBI. Please mark each page of your submission containing 
CBI as ``PROPIN.'' The FAA will treat such marked submissions as 
confidential under the FOIA, and they will not be placed in the public 
docket of this NPRM. Submissions containing CBI should be sent to Hien 
T. Nguyen, Aviation Safety Engineer, FAA, 2200 South 216th St., Des 
Moines, WA 98198; phone: 206-231-3977; email: [email protected]. 
Any commentary that the FAA receives that is not specifically 
designated as CBI will be placed in the public docket for this 
rulemaking.

Background

    The FAA has received a report indicating that the loss of a ground 
through the P6 panel results in the failure in the SPCU. The SPCU 
provides AC and DC electrical power in the event there is a loss of 
power provided by primary electrical sources. Currently, there is a 
single ground strap between the P6 structure and airplane primary 
structure. This design was carried over to the 737 MAX airplanes from 
the 737 NG airplanes. The SPCU tray on the 737 MAX airplanes has an 
inherent bond path through the P6 structure. However, the requirements 
for redundant grounds to the SPCU tray did not flow down to include 
redundant grounds through the P6 panel to airplane primary structure. 
During a bonding analysis, it was determined that separate redundant 
ground paths from the two ground blocks on the SPCU tray to airplane 
primary structure are required in order to prevent a single point of 
failure condition, which could result in a potentially confusing 
combination of flight deck effects and a combination of

[[Page 52056]]

lost functionality. This condition, if not addressed, would result in 
loss of significant flightcrew instrumentation and displays and may 
lead to loss of continued safe flight and landing (CSFL).

FAA's Determination

    The FAA is issuing this NPRM after determining that the unsafe 
condition described previously is likely to exist or develop on other 
products of the same type design.

Related Service Information Under 1 CFR Part 51

    The FAA reviewed Boeing Alert Requirements Bulletin 737-24A1248 RB, 
dated May 16, 2022. This service information specifies procedures to 
install new bonding jumpers from the P6 panel structure to the primary 
structure to provide a redundant ground path for the SPCU.
    This service information is reasonably available because the 
interested parties have access to it through their normal course of 
business or by the means identified in ADDRESSES.

Proposed AD Requirements in This NPRM

    This proposed AD would require accomplishing the actions specified 
in the service information already described, except for any 
differences identified as exceptions in the regulatory text of this 
proposed AD. For information on the procedures and compliance times, 
see this service information at regulations.gov under Docket No. FAA-
2023-1400.

Costs of Compliance

    The FAA estimates that this AD, if adopted as proposed, would 
affect 79 airplanes of U.S. registry. The FAA estimates the following 
costs to comply with this proposed AD:

                                                 Estimated Costs
----------------------------------------------------------------------------------------------------------------
                                                                                    Cost per       Cost on U.S.
              Action                        Labor cost            Parts cost        product         operators
----------------------------------------------------------------------------------------------------------------
Install two bonding jumpers.......  3 work-hour x $85 per                $180             $435          $34,365
                                     hour = $255.
----------------------------------------------------------------------------------------------------------------

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. Subtitle VII: Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    The FAA is issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701: General requirements. 
Under that section, Congress charges the FAA with promoting safe flight 
of civil aircraft in air commerce by prescribing regulations for 
practices, methods, and procedures the Administrator finds necessary 
for safety in air commerce. This regulation is within the scope of that 
authority because it addresses an unsafe condition that is likely to 
exist or develop on products identified in this rulemaking action.

Regulatory Findings

    The FAA determined that this proposed AD would not have federalism 
implications under Executive Order 13132. This proposed AD would not 
have a substantial direct effect on the States, on the relationship 
between the national Government and the States, or on the distribution 
of power and responsibilities among the various levels of government.
    For the reasons discussed above, I certify this proposed 
regulation:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Would not affect intrastate aviation in Alaska, and
    (3) Would not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

The Proposed Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA proposes to amend 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority:  49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive:

The Boeing Company: Docket No. FAA-2023-1400; Project Identifier AD-
2022-01374-T.

(a) Comments Due Date

    The FAA must receive comments on this airworthiness directive 
(AD) by September 21, 2023.

(b) Affected ADs

    None.

(c) Applicability

    This AD applies to The Boeing Company Model 737-8 and 737-9 
airplanes, certificated in any category, as identified in Boeing 
Alert Requirements Bulletin 737-24A1248 RB, dated May 16, 2022.

(d) Subject

    Air Transport Association (ATA) of America Code 24, Electrical 
Power.

(e) Unsafe Condition

    This AD was prompted by a determination that the loss of ground 
through the P6 panel results in the failure of the standby power 
control unit (SPCU). The loss of the SPCU and P6 would result in the 
loss of significant flight crew instrumentation and displays. It was 
determined that separate redundant ground paths from the two ground 
blocks on the SPCU tray to airplane primary structure are required 
in order to prevent a single point of failure condition. The FAA is 
issuing this AD to address loss of the SPCU and P6 panel. The unsafe 
condition, if not addressed, would result in the loss of significant 
flightcrew instruments and displays, and may lead to loss of 
continued safe flight and landing.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Required Actions

    Except as specified by paragraph (h) of this AD: At the 
applicable times specified in the ``Compliance'' paragraph of Boeing 
Alert Requirements Bulletin 737-24A1248 RB, dated May 16, 2022, do 
all applicable actions identified in, and in accordance with, the 
Accomplishment Instructions of Boeing Alert Requirements Bulletin 
737-24A1248 RB, dated May 16, 2022.
    Note 1 to paragraph (g): Guidance for accomplishing the actions 
required by this AD can be found in Boeing Alert Service Bulletin 
737-24A1248, dated May 16, 2022, which is referred to in Boeing 
Alert Requirements Bulletin 737-24A1248 RB, dated May 16, 2022.

[[Page 52057]]

(h) Exceptions to Service Information Specifications

    Where the Compliance Time column of the table in the 
``Compliance'' paragraph of Boeing Alert Requirements Bulletin 737-
24A1248 RB, dated May 16, 2022, uses the phrase ``the original issue 
date of Requirements Bulletin 737-24A1248 RB,'' this AD requires 
using ``the effective date of this AD.''

(i) Alternative Methods of Compliance (AMOCs)

    (1) The Manager, AIR-520 Continued Operational Safety Branch, 
FAA, has the authority to approve AMOCs for this AD, if requested 
using the procedures found in 14 CFR 39.19. In accordance with 14 
CFR 39.19, send your request to your principal inspector or 
responsible Flight Standards Office, as appropriate. If sending 
information directly to the manager of the certification office, 
send it to the attention of the person identified in paragraph (j) 
of this AD. Information may be emailed to: [email protected].
    (2) Before using any approved AMOC, notify your appropriate 
principal inspector, or lacking a principal inspector, the manager 
of the responsible Flight Standards Office.
    (3) An AMOC that provides an acceptable level of safety may be 
used for any repair, modification, or alteration required by this AD 
if it is approved by The Boeing Company Organization Designation 
Authorization (ODA) that has been authorized by the Manager, AIR-520 
Continued Operational Safety Branch, FAA, to make those findings. To 
be approved, the repair method, modification deviation, or 
alteration deviation must meet the certification basis of the 
airplane, and the approval must specifically refer to this AD.

(j) Related Information

    (1) For more information about this AD, contact Hien T. Nguyen, 
Aviation Safety Engineer, FAA, 2200 South 216th St., Des Moines, WA 
98198; phone: 206-231-3977; email: [email protected].
    (2) Service information identified in this AD that is not 
incorporated by reference is available at the addresses specified in 
paragraphs (k)(3) and (4) of this AD.

(k) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the 
incorporation by reference (IBR) of the service information listed 
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
    (2) You must use this service information as applicable to do 
the actions required by this AD, unless the AD specifies otherwise.
    (i) Boeing Alert Requirements Bulletin 737-24A1248 RB, dated May 
16, 2022.
    (ii) [Reserved]
    (3) For service information identified in this AD, contact 
Boeing Commercial Airplanes, Attention: Contractual & Data Services 
(C&DS), 2600 Westminster Blvd., MC 110-SK57, Seal Beach, CA 90740-
5600; telephone 562-797-1717; website myboeingfleet.com.
    (4) You may view this service information at the FAA, 
Airworthiness Products Section, Operational Safety Branch, 2200 
South 216th St., Des Moines, WA. For information on the availability 
of this material at the FAA, call 206-231-3195.
    (5) You may view this service information that is incorporated 
by reference at the National Archives and Records Administration 
(NARA). For information on the availability of this material at 
NARA, [email protected], or go to: www.archives.gov/federal-register/cfr/ibr-locations.html.

    Issued on July 31, 2023.
Victor Wicklund,
Deputy Director, Compliance & Airworthiness Division, Aircraft 
Certification Service.
[FR Doc. 2023-16644 Filed 8-4-23; 8:45 am]
BILLING CODE 4910-13-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.