Notice of Request for Approval of a New Information Collection, 44778-44779 [2023-14827]
Download as PDF
44778
Federal Register / Vol. 88, No. 133 / Thursday, July 13, 2023 / Notices
The information is usually submitted
via hand delivery or U.S. Postal Service
to the appropriate Agency office.
Electronic submittal of information is
also possible through email or USDA’s
Service Center eForms website.
The Agencies would not be assured
that the security provided for loans is
adequate, nor would the Agencies be
certain that decent, safe, and sanitary
dwelling or other adequate structures
were being provided to rural residents
as required by the different acts.
Estimate of Burden: RD is requesting
approval for one respondent and a onehour place holder in order for OMB to
issue a control number for these forms.
The burden for each of the forms will
be accounted for within the individual
Rural Development program collection
packages using the form(s).
Respondents: Individuals or private
entities; businesses or other for profit;
not-for profit; small businesses; Federal,
state, local or tribal governments;
institutions of higher education or other
research organizations and others.
Estimated Number of Responses per
Respondent per Form in package:
Form No.
Responses
per
respondent
442–2, 442–3, 442–7, 442–22 ...
1
All responses to this notice will be
summarized and included in the request
for OMB approval. All comments will
become a matter of public record.
Karama Neal,
Administrator, Rural Business-Cooperative
Service.
[FR Doc. 2023–14829 Filed 7–12–23; 8:45 am]
BILLING CODE 3410–XV–P
DEPARTMENT OF AGRICULTURE
Rural Business-Cooperative Service
[Docket No. RBS–23–Business–0018]
Notice of Request for Approval of a
New Information Collection
Rural Housing Service, and
Rural Business-Cooperative Service,
USDA.
ACTION: Notice and request for
comments.
ddrumheller on DSK120RN23PROD with NOTICES1
AGENCY:
In accordance with the
Paperwork Reduction Act of 1995, this
notice announces the intention of the
Rural Business-Cooperative Service, and
Rural Housing Service, agencies of the
Rural Development mission area within
the U.S. Department of Agriculture
(USDA), hereinafter collectively referred
SUMMARY:
VerDate Sep<11>2014
17:24 Jul 12, 2023
Jkt 259001
to as the Agency to request approval for
a new information collection in support
of compliance with applicable acts for
planning and performing construction
and other development work.
DATES: Comments on this notice must be
received by September 11, 2023.
ADDRESSES: Comments may be
submitted by the following method:
• Federal eRulemaking Portal: This
website provides the ability to type
short comments directly into the
comment field on this web page or
attach a file for lengthier comments. Go
to https://www.regulations.gov. Follow
the on-line instructions at that site for
submitting comments.
FOR FURTHER INFORMATION CONTACT:
Lynn Gilbert, Rural Development
Innovation Center—Regulations
Management Division, USDA, 1400
Independence Avenue SW, South
Building, Washington, DC 20250–1522.
Telephone: (202) 690–2682. Email
lynn.gilbert@usda.gov.
SUPPLEMENTARY INFORMATION: The Office
of Management and Budget’s (OMB)
regulation (5 CFR part 1320)
implementing provisions of the
Paperwork Reduction Act of 1995 (Pub.
L. 104–13) requires that interested
members of the public and affected
agencies have an opportunity to
comment on information collection and
recordkeeping activities (see 5 CFR
1320.8(d)). This notice identifies an
information collection that Rural
Development is submitting to OMB for
a new collection.
Comments are invited on: (a) Whether
the proposed collection of information
is necessary for the proper performance
of the functions of the Agency,
including whether the information will
have practical utility; (b) The accuracy
of the Agency’s estimate of the burden
of the proposed collection of
information including the validity of the
methodology and assumptions used; (c)
Ways to enhance the quality, utility and
clarity of the information to be
collected; and (d) Ways to minimize the
burden of the collection of information
on those who are to respond, including
through the use of appropriate
automated, electronic, mechanical, or
other technological collection
techniques or other forms of information
technology.
Comments may be sent by the Federal
eRulemaking Portal: Go to https://
www.regulations.gov and, in the lower
‘‘Search Regulations and Federal
Actions’’ box, select ‘‘RBS’’ from the
agency drop-down menu, then click on
‘‘Submit.’’ In the Docket ID column,
select RBS–23–Business–0018 to submit
or view public comments and to view
PO 00000
Frm 00004
Fmt 4703
Sfmt 4703
supporting and related materials
available electronically. Information on
using Regulations.gov, including
instructions for accessing documents,
submitting comments, and viewing the
docket after the close of the comment
period, is available through the site’s
‘‘User Tips’’ link.
Title: 7 CFR 1980—Common Forms
Package for Guaranteed Loan Forms.
OMB Number: 0570–New.
Expiration Date of Approval: Three
years from approval date.
Type of Request: New information
collection.
Abstract: The information collection
under OMB Number 0575–New will
enable the Agencies to effectively
administer the policies, methods, and
responsibilities for the funding and
transmittal of post-award Federal
funding for approved programs and
projects.
The purpose of this information
collection is to obtain information
necessary to efficiently set up a
functional system for the transmittal of
payments after an applicant has been
awarded funding.
Information for the RD forms and
their usage in this collection package are
included in this supporting statement.
Information will be collected by the
field offices from applicants,
consultants, lenders, and public entities.
The collection of information is
considered the minimum necessary to
effectively evaluate the overall scope of
the project.
Failure to collect information could
have an adverse impact on effectively
carrying out the mission,
administration, processing, and program
requirements.
Estimate of Burden: RD is requesting
approval for one respondent and a onehour place holder in order for OMB to
issue a control number for these forms.
The burden for each of the forms will
be accounted for within the individual
Rural Development program collection
packages using the form(s).
Respondents: Respondents for this
data are lending institutions and forprofit businesses but also include
individuals and corporations.
Estimated Number of Responses per
Respondent per Form in package:
Form No.
1980–19
1980–41
1980–43
1980–44
......................................
......................................
......................................
......................................
Responses
per
respondent
1
1
1
1
All responses to this notice will be
summarized and included in the request
E:\FR\FM\13JYN1.SGM
13JYN1
Federal Register / Vol. 88, No. 133 / Thursday, July 13, 2023 / Notices
for OMB approval. All comments will
become a matter of public record.
Karama Neal,
Administrator, Rural Business-Cooperative
Service.
[FR Doc. 2023–14827 Filed 7–12–23; 8:45 am]
BILLING CODE 3410–XY–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–44–2023]
ddrumheller on DSK120RN23PROD with NOTICES1
Foreign-Trade Zone (FTZ) 49,
Notification of Proposed Production
Activity; Getinge Group Logistics
Americas LLC; (Health Care Products
and Kits); Dayton, New Jersey
Getinge Group Logistics Americas
LLC submitted a notification of
proposed production activity to the FTZ
Board (the Board) for its facility in
Dayton, New Jersey within Subzone
49W. The notification conforming to the
requirements of the Board’s regulations
(15 CFR 400.22) was received on July 7,
2023.
Pursuant to 15 CFR 400.14(b), FTZ
production activity would be limited to
the specific foreign-status material(s)/
component(s) and specific finished
product(s) described in the submitted
notification (summarized below) and
subsequently authorized by the Board.
The benefits that may stem from
conducting production activity under
FTZ procedures are explained in the
background section of the Board’s
website—accessible via www.trade.gov/
ftz.
The proposed finished products
include: maintenance kits (printer;
heater; sterilizer); water utility
connector kits; caster kits; electrical
parts service kits for boilers; sterilizer
steam purifiers; steam and water gun
sets; printer replacement kits; valve
assembly kits; gas, oil, and water pump
assemblies; gas, oil, air, and water filters
and filter assemblies; liquid applicator
attachments; repair kits (check valve;
alarm; temperature probe; electronic
display); voltage conversion kits; timer
accessory packages; shelf add-on kits;
and, surgical light assemblies with
mounting and positioning hardware
(duty rate ranges from duty-free to 5.7%,
and from 15¢ each + 4% + 2.5¢/jewel to
45¢ each + 6.4% + 2.5¢/jewel).
The proposed foreign-status materials
and components include: plastic
components (hose assemblies; gaskets;
O-rings; door seals; end caps; cover
plates); rubber components (hose
assemblies; gaskets; O-rings; door seals);
labels (paper; plastic); zip lock bags;
VerDate Sep<11>2014
17:24 Jul 12, 2023
Jkt 259001
printer paper; preprinted and unprinted
paper tags and labels; paper gaskets;
technical drawings and manuals; sealing
graphite; fiberglass insulation; tubing
ferrules; steel and stainless steel
components (collars; couplings; studs;
spacers; reducers; bushings; chain
connectors); stainless steel components
(screws; bolts; nuts; washers; screen
mesh); steel components (washers;
springs); retaining rings; roll pins; hose
clamps, collars, and retaining clips;
copper components (tubing; pipe;
sterilizer fittings); brass components
(pipe bushings; nipples; pigtails;
unions; elbows; couplings; plugs; caps;
tees; nuts; solenoid valves); bronze
components (washers; ball valves);
brass, bronze, and copper tanks and
tank fittings; aluminum clamps and
collars; base metal components (keys;
hinges; pins; shafts); wheels and casters;
door stops, brackets, and supports;
steam boilers; steam separators; dosing
pumps; axial fan heaters; mechanical
spacers and standoffs; bronze water
strainers; air and steam filters and filter
assemblies; filter gaskets; sterilizer
cleaning equipment; thermal printers;
printer take-up rolls; brass, bronze, and
stainless steel check valves; valves
(safety; needle; pneumatic); steam traps;
electrical adapters for valves; bearings
and bearing assemblies (thrust;
eccentric; sleeve); bearing races;
polytetrafluoroethylene bearings;
Woodruff keys; audible and visual
alarms; variable resistors; arc
suppressors; relays; electrical conduits;
power supplies; switch panels; flash
memories; wire harnesses; sensors
(flow; level); pressure sensors and
gauges; timers; warming shelves; arms
for lighting (spring mounting;
suspension; extension); ceiling light
pendants; light-emitting diode surgical
lights; computer screen fixtures; and,
installation and operation manuals
(duty rate ranges from duty-free to 9.9%,
and from 15¢ each + 4% + 2.5¢/jewel to
45¢ each + 6.4% + 2.5¢/jewel). The
request indicates that certain materials/
components are subject to duties under
section 232 of the Trade Expansion Act
of 1962 (section 232) or section 301 of
the Trade Act of 1974 (section 301),
depending on the country of origin. The
applicable section 232 and section 301
decisions require subject merchandise
to be admitted to FTZs in privileged
foreign status (19 CFR 146.41).
Public comment is invited from
interested parties. Submissions shall be
addressed to the Board’s Executive
Secretary and sent to: ftz@trade.gov. The
closing period for their receipt is August
22, 2023.
A copy of the notification will be
available for public inspection in the
PO 00000
Frm 00005
Fmt 4703
Sfmt 4703
44779
‘‘Online FTZ Information System’’
section of the Board’s website.
For further information, contact
Juanita Chen at juanita.chen@trade.gov.
Dated: July 10, 2023.
Elizabeth Whiteman,
Executive Secretary.
[FR Doc. 2023–14876 Filed 7–12–23; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
[A–570–073, C–570–074]
Common Alloy Aluminum Sheet From
the People’s Republic of China:
Initiation of Circumvention Inquiry of
the Antidumping and Countervailing
Duty Orders; Aluminum Sheet Further
Processed in the Republic of Korea
Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
SUMMARY: In response to a request from
the Aluminum Association Common
Alloy Aluminum Sheet Trade
Enforcement Working Group and its
individual members (the domestic
industry), the U.S. Department of
Commerce (Commerce) is initiating a
company-specific circumvention
inquiry to determine whether imports of
common alloy aluminum sheet (CAAS)
from the Republic of Korea (Korea)
produced by Gwangyang Aluminum
Industries Co., Ltd. (Gwangyang
Aluminum), which is completed or
assembled using non-subject flat rolled
aluminum having a thickness greater
than 6.3 millimeters (mm) produced by
Henan Mingtai Aluminum Industry Co.,
Ltd. (Henan Mingtai) or Zhengzhou
Mingtai Industry Co., Ltd. (Zhengzhou
Mingtai) in the People’s Republic of
China (China), is circumventing the
antidumping duty (AD) and
countervailing duty (CVD) orders on
CAAS from China.
DATES: Applicable July 13, 2023.
FOR FURTHER INFORMATION CONTACT:
Frank Schmitt, AD/CVD Operations,
Office VI, Enforcement and Compliance,
International Trade Administration,
U.S. Department of Commerce, 1401
Constitution Avenue NW, Washington,
DC 20230; telephone: (202) 482–4880.
SUPPLEMENTARY INFORMATION:
AGENCY:
Background
On May 23, 2023, the domestic
industry 1 filed a circumvention inquiry
1 The individual members of the Aluminum
Association Common Alloy Aluminum Sheet Trade
E:\FR\FM\13JYN1.SGM
Continued
13JYN1
Agencies
[Federal Register Volume 88, Number 133 (Thursday, July 13, 2023)]
[Notices]
[Pages 44778-44779]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2023-14827]
-----------------------------------------------------------------------
DEPARTMENT OF AGRICULTURE
Rural Business-Cooperative Service
[Docket No. RBS-23-Business-0018]
Notice of Request for Approval of a New Information Collection
AGENCY: Rural Housing Service, and Rural Business-Cooperative Service,
USDA.
ACTION: Notice and request for comments.
-----------------------------------------------------------------------
SUMMARY: In accordance with the Paperwork Reduction Act of 1995, this
notice announces the intention of the Rural Business-Cooperative
Service, and Rural Housing Service, agencies of the Rural Development
mission area within the U.S. Department of Agriculture (USDA),
hereinafter collectively referred to as the Agency to request approval
for a new information collection in support of compliance with
applicable acts for planning and performing construction and other
development work.
DATES: Comments on this notice must be received by September 11, 2023.
ADDRESSES: Comments may be submitted by the following method:
Federal eRulemaking Portal: This website provides the
ability to type short comments directly into the comment field on this
web page or attach a file for lengthier comments. Go to https://www.regulations.gov. Follow the on-line instructions at that site for
submitting comments.
FOR FURTHER INFORMATION CONTACT: Lynn Gilbert, Rural Development
Innovation Center--Regulations Management Division, USDA, 1400
Independence Avenue SW, South Building, Washington, DC 20250-1522.
Telephone: (202) 690-2682. Email [email protected].
SUPPLEMENTARY INFORMATION: The Office of Management and Budget's (OMB)
regulation (5 CFR part 1320) implementing provisions of the Paperwork
Reduction Act of 1995 (Pub. L. 104-13) requires that interested members
of the public and affected agencies have an opportunity to comment on
information collection and recordkeeping activities (see 5 CFR
1320.8(d)). This notice identifies an information collection that Rural
Development is submitting to OMB for a new collection.
Comments are invited on: (a) Whether the proposed collection of
information is necessary for the proper performance of the functions of
the Agency, including whether the information will have practical
utility; (b) The accuracy of the Agency's estimate of the burden of the
proposed collection of information including the validity of the
methodology and assumptions used; (c) Ways to enhance the quality,
utility and clarity of the information to be collected; and (d) Ways to
minimize the burden of the collection of information on those who are
to respond, including through the use of appropriate automated,
electronic, mechanical, or other technological collection techniques or
other forms of information technology.
Comments may be sent by the Federal eRulemaking Portal: Go to
https://www.regulations.gov and, in the lower ``Search Regulations and
Federal Actions'' box, select ``RBS'' from the agency drop-down menu,
then click on ``Submit.'' In the Docket ID column, select RBS-23-
Business-0018 to submit or view public comments and to view supporting
and related materials available electronically. Information on using
Regulations.gov, including instructions for accessing documents,
submitting comments, and viewing the docket after the close of the
comment period, is available through the site's ``User Tips'' link.
Title: 7 CFR 1980--Common Forms Package for Guaranteed Loan Forms.
OMB Number: 0570-New.
Expiration Date of Approval: Three years from approval date.
Type of Request: New information collection.
Abstract: The information collection under OMB Number 0575-New will
enable the Agencies to effectively administer the policies, methods,
and responsibilities for the funding and transmittal of post-award
Federal funding for approved programs and projects.
The purpose of this information collection is to obtain information
necessary to efficiently set up a functional system for the transmittal
of payments after an applicant has been awarded funding.
Information for the RD forms and their usage in this collection
package are included in this supporting statement.
Information will be collected by the field offices from applicants,
consultants, lenders, and public entities. The collection of
information is considered the minimum necessary to effectively evaluate
the overall scope of the project.
Failure to collect information could have an adverse impact on
effectively carrying out the mission, administration, processing, and
program requirements.
Estimate of Burden: RD is requesting approval for one respondent
and a one-hour place holder in order for OMB to issue a control number
for these forms. The burden for each of the forms will be accounted for
within the individual Rural Development program collection packages
using the form(s).
Respondents: Respondents for this data are lending institutions and
for-profit businesses but also include individuals and corporations.
Estimated Number of Responses per Respondent per Form in package:
------------------------------------------------------------------------
Responses
Form No. per
respondent
------------------------------------------------------------------------
1980-19..................................................... 1
1980-41..................................................... 1
1980-43..................................................... 1
1980-44..................................................... 1
------------------------------------------------------------------------
All responses to this notice will be summarized and included in the
request
[[Page 44779]]
for OMB approval. All comments will become a matter of public record.
Karama Neal,
Administrator, Rural Business-Cooperative Service.
[FR Doc. 2023-14827 Filed 7-12-23; 8:45 am]
BILLING CODE 3410-XY-P