Draft Regulatory Guide: Damping Values for Seismic Design of Nuclear Power Plants, 38408-38409 [2023-12631]

Download as PDF 38408 Federal Register / Vol. 88, No. 113 / Tuesday, June 13, 2023 / Proposed Rules III. Submitting Suggestions for Improvement of Regulatory Guides A member of the public may, at any time, submit suggestions to the NRC for improvement of existing RGs or for the development of new RGs. Suggestions can be submitted on the NRC’s public website at https://www.nrc.gov/readingrm/doc-collections/reg-guides/ contactus.html. Suggestions will be considered in future updates and enhancements to the ‘‘Regulatory Guide’’ series. Dated: June 7, 2023. For the Nuclear Regulatory Commission. Meraj Rahimi, Chief, Regulatory Guide and Programs Management Branch, Division of Engineering, Office of Nuclear Regulatory Research. [FR Doc. 2023–12589 Filed 6–12–23; 8:45 am] BILLING CODE 7590–01–P NUCLEAR REGULATORY COMMISSION 10 CFR Parts 51, 52, 100 [NRC–2023–0097] Draft Regulatory Guide: Damping Values for Seismic Design of Nuclear Power Plants Nuclear Regulatory Commission. ACTION: Draft guide; request for comment. AGENCY: The U.S. Nuclear Regulatory Commission (NRC) is issuing for public comment a draft regulatory guide (DG), DG–1364, ‘‘Damping Values for Seismic Design of Nuclear Power Plants.’’ This DG is proposed Revision 2 of Regulatory Guide (RG) 1.61. This DG describes an approach on damping values that is acceptable to the NRC staff for use in meeting regulatory requirements for the seismic response analysis of seismic Category I nuclear power plant structures, systems, and components. DATES: Submit comments by July 13, 2023. Comments received after this date will be considered if it is practical to do so, but the NRC is able to ensure consideration only for comments received on or before this date. ADDRESSES: You may submit comments by any of the following methods; however, the NRC encourages electronic comment submission through the Federal rulemaking website: • Federal rulemaking website: Go to https://www.regulations.gov and search for Docket ID NRC–2023–0097. Address questions about Docket IDs in Regulations.gov to Stacy Schumann; telephone: 301–415–0624; email: ddrumheller on DSK120RN23PROD with PROPOSALS1 SUMMARY: VerDate Sep<11>2014 17:07 Jun 12, 2023 Jkt 259001 Stacy.Schumann@nrc.gov. For technical questions, contact the individuals listed in the FOR FURTHER INFORMATION CONTACT section of this document. • Mail comments to: Office of Administration, Mail Stop: TWFN–7– A60M, U.S. Nuclear Regulatory Commission, Washington, DC 20555– 0001, ATTN: Program Management, Announcements and Editing Staff. For additional direction on obtaining information and submitting comments, see ‘‘Obtaining Information and Submitting Comments’’ in the SUPPLEMENTARY INFORMATION section of this document. FOR FURTHER INFORMATION CONTACT: Edward O’Donnell, telephone: 301–415– 3317; email: Edward.ODonnell@nrc.gov and Marcos Rolon Acevedo, telephone: 301–415–2208; email: Marcos.RolonAcevedo@nrc.gov. Both are staff of the Office of Nuclear Regulatory Research at the U.S. Nuclear Regulatory Commission, Washington, DC 20555–0001. SUPPLEMENTARY INFORMATION: I. Obtaining Information and Submitting Comments A. Obtaining Information Please refer to Docket ID NRC–2023– 0097 when contacting the NRC about the availability of information for this action. You may obtain publicly available information related to this action by any of the following methods: • Federal Rulemaking website: Go to https://www.regulations.gov and search for Docket ID NRC–2023–0097. • NRC’s Agencywide Documents Access and Management System (ADAMS): You may obtain publicly available documents online in the ADAMS Public Documents collection at https://www.nrc.gov/reading-rm/ adams.html. To begin the search, select ‘‘Begin Web-based ADAMS Search.’’ For problems with ADAMS, please contact the NRC’s Public Document Room (PDR) reference staff at 1–800–397–4209, 301– 415–4737, or by email to PDR.Resource@nrc.gov. The ADAMS accession number for each document referenced (if it is available in ADAMS) is provided the first time that it is mentioned in this document. • NRC’s PDR: You may examine and purchase copies of public documents, by appointment, at the NRC’s PDR, Room P1 B35, One White Flint North, 11555 Rockville Pike, Rockville, Maryland 20852. To make an appointment to visit the PDR, please send an email to PDR.Resource@nrc.gov or call 1–800–397–4209 or 301–415– 4737, between 8 a.m. and 4 p.m. eastern PO 00000 Frm 00002 Fmt 4702 Sfmt 4702 time (ET), Monday through Friday, except Federal holidays. B. Submitting Comments The NRC encourages electronic comment submission through the Federal rulemaking website (https:// www.regulations.gov). Please include Docket ID NRC–2023–0097 in your comment submission. The NRC cautions you not to include identifying or contact information that you do not want to be publicly disclosed in your comment submission. The NRC will post all comment submissions at https:// www.regulations.gov as well as enter the comment submissions into ADAMS. The NRC does not routinely edit comment submissions to remove identifying or contact information. If you are requesting or aggregating comments from other persons for submission to the NRC, then you should inform those persons not to include identifying or contact information that they do not want to be publicly disclosed in their comment submission. Your request should state that the NRC does not routinely edit comment submissions to remove such information before making the comment submissions available to the public or entering the comment into ADAMS. II. Additional Information The NRC is issuing for public comment a DG in the NRC’s ‘‘Regulatory Guide’’ series. This series was developed to describe methods that are acceptable to the NRC staff for implementing specific parts of the agency’s regulations, to explain techniques that the staff uses in evaluating specific issues or postulated events, and to describe information that the staff needs in its review of applications for permits and licenses. The DG, entitled ‘‘Damping Values for Seismic Design of Nuclear Power Plants,’’ (ADAMS Accession No. ML22273A040) is temporarily identified by its task number, DG–1364. The proposed guide provides guidance for applicants and licensees on damping values that the NRC staff finds acceptable for use in the seismic response analysis of seismic Category I nuclear power plant structures, systems, and components. The specified damping values are intended for elastic dynamic seismic analysis where energy dissipation is accounted for by viscous damping. Since the issuance of revision 1 of RG 1.61 in 2007, updated criteria related to the concrete properties and damping values for use in the development of in-structure response spectra has become available. E:\FR\FM\13JNP1.SGM 13JNP1 Federal Register / Vol. 88, No. 113 / Tuesday, June 13, 2023 / Proposed Rules DG–1364 addresses the updated criteria for concrete properties and new damping criteria for use in seismic analysis and design of nuclear power plants structures. The staff is also issuing for public comment a draft regulatory analysis (ADAMS Accession No. ML22273A041). The staff developed a regulatory analysis to assess the value of issuing or revising a regulatory guide as well as determine courses of action. As noted in the Federal Register on December 9, 2022 (87 FR 75671), this document is being published in the ‘‘Proposed Rules’’ section of the Federal Register to comply with publication requirements under chapter I of title 1 of the Code of Federal Regulations (CFR). III. Backfitting, Forward Fitting, and Issue Finality Issuance of DG–1364 as a final RG would not constitute backfitting as that term is defined in 10 CFR 50.109, ‘‘Backfitting,’’ and as described in NRC Management Directive (MD) 8.4, ‘‘Management of Backfitting, Forward Fitting, Issue Finality, and Information Requests,’’ to affect the issue finality of an approval issued under 10 CFR part 52, ‘‘Licenses, Certifications, and Approvals for Nuclear Power Plants;’’ or constitutes forward fitting as that term is defined and described in MD 8.4 because, as explained in DG–1364, licensees would not be required to comply with the positions set forth in the DG. IV. Submitting Suggestions for Improvement of Regulatory Guides ddrumheller on DSK120RN23PROD with PROPOSALS1 A member of the public may, at any time, submit suggestions to the NRC for improvement of existing RGs or for the development of new RGs. Suggestions can be submitted on the NRC’s public website at https://www.nrc.gov/readingrm/doc-collections/reg-guides/ contactus.html. Suggestions will be considered in future updates and enhancements to the ‘‘Regulatory Guide’’ series. Dated: June 8, 2023. For the Nuclear Regulatory Commission. Meraj Rahimi, Chief, Regulatory Guide and Programs Management Branch, Division of Engineering, Office of Nuclear Regulatory Research. [FR Doc. 2023–12631 Filed 6–12–23; 8:45 am] BILLING CODE 7590–01–P VerDate Sep<11>2014 17:07 Jun 12, 2023 Jkt 259001 DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2023–1210; Project Identifier MCAI–2022–01530–E] RIN 2120–AA64 Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Engines Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). AGENCY: The FAA proposes to adopt a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG (RRD) Model RB211–535C–37 engines. This proposed AD was prompted by the manufacturer revising the existing engine time limits manual (TLM) to introduce new or more restrictive airworthiness limitations and associated thresholds and intervals for life-limited parts. This proposed AD would require revising the airworthiness limitations section (ALS) of the operator’s existing approved engine maintenance or inspection program, as applicable, to incorporate new or more restrictive instructions and associated thresholds and intervals for life-limited parts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products. SUMMARY: The FAA must receive comments on this proposed AD by July 28, 2023. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions for submitting comments. • Fax: (202) 493–2251. • Mail: U.S. Department of Transportation, Docket Operations, M– 30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE, Washington, DC 20590. • Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA–2023–1210; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, the mandatory continuing airworthiness information DATES: PO 00000 Frm 00003 Fmt 4702 Sfmt 4702 38409 (MCAI), any comments received, and other information. The street address for Docket Operations is listed above. Material Incorporated by Reference: • For material that is proposed for IBR in this NPRM, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; phone: +49 221 8999 000; email: ADs@easa.europa.eu; website: easa.europa.eu. You may find this material on the EASA website at ad.easa.europa.eu. It is also available at regulations.gov under Docket No. FAA– 2023–1210. • You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 1200 District Avenue, Burlington, MA 01803. For information on the availability of this material at the FAA, call (817) 222– 5110. FOR FURTHER INFORMATION CONTACT: Sungmo Cho, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; phone: (781) 238– 7241; email: Sungmo.D.Cho@faa.gov. SUPPLEMENTARY INFORMATION: Comments Invited The FAA invites you to send any written relevant data, views, or arguments about this proposal. Send your comments to an address listed under ADDRESSES. Include ‘‘Docket No. FAA–2023–1210; Project Identifier MCAI–2022–01530–E’’ at the beginning of your comments. The most helpful comments reference a specific portion of the proposal, explain the reason for any recommended change, and include supporting data. The FAA will consider all comments received by the closing date and may amend this proposal because of those comments. Except for Confidential Business Information (CBI) as described in the following paragraph, and other information as described in 14 CFR 11.35, the FAA will post all comments received, without change, to regulations.gov, including any personal information you provide. The agency will also post a report summarizing each substantive verbal contact received about this NPRM. Confidential Business Information CBI is commercial or financial information that is both customarily and actually treated as private by its owner. Under the Freedom of Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public disclosure. If your comments responsive to this NPRM contain commercial or financial information that is customarily treated as private, that you actually treat as private, and that is relevant or E:\FR\FM\13JNP1.SGM 13JNP1

Agencies

[Federal Register Volume 88, Number 113 (Tuesday, June 13, 2023)]
[Proposed Rules]
[Pages 38408-38409]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2023-12631]


-----------------------------------------------------------------------

NUCLEAR REGULATORY COMMISSION

10 CFR Parts 51, 52, 100

[NRC-2023-0097]


Draft Regulatory Guide: Damping Values for Seismic Design of 
Nuclear Power Plants

AGENCY: Nuclear Regulatory Commission.

ACTION: Draft guide; request for comment.

-----------------------------------------------------------------------

SUMMARY: The U.S. Nuclear Regulatory Commission (NRC) is issuing for 
public comment a draft regulatory guide (DG), DG-1364, ``Damping Values 
for Seismic Design of Nuclear Power Plants.'' This DG is proposed 
Revision 2 of Regulatory Guide (RG) 1.61. This DG describes an approach 
on damping values that is acceptable to the NRC staff for use in 
meeting regulatory requirements for the seismic response analysis of 
seismic Category I nuclear power plant structures, systems, and 
components.

DATES: Submit comments by July 13, 2023. Comments received after this 
date will be considered if it is practical to do so, but the NRC is 
able to ensure consideration only for comments received on or before 
this date.

ADDRESSES: You may submit comments by any of the following methods; 
however, the NRC encourages electronic comment submission through the 
Federal rulemaking website:
     Federal rulemaking website: Go to https://www.regulations.gov and search for Docket ID NRC-2023-0097. Address 
questions about Docket IDs in Regulations.gov to Stacy Schumann; 
telephone: 301-415-0624; email: [email protected]. For technical 
questions, contact the individuals listed in the For Further 
Information Contact section of this document.
     Mail comments to: Office of Administration, Mail Stop: 
TWFN-7-A60M, U.S. Nuclear Regulatory Commission, Washington, DC 20555-
0001, ATTN: Program Management, Announcements and Editing Staff.
    For additional direction on obtaining information and submitting 
comments, see ``Obtaining Information and Submitting Comments'' in the 
SUPPLEMENTARY INFORMATION section of this document.

FOR FURTHER INFORMATION CONTACT: Edward O'Donnell, telephone: 301-415-
3317; email: [email protected] and Marcos Rolon Acevedo, 
telephone: 301-415-2208; email: [email protected]. Both are 
staff of the Office of Nuclear Regulatory Research at the U.S. Nuclear 
Regulatory Commission, Washington, DC 20555-0001.

SUPPLEMENTARY INFORMATION:

I. Obtaining Information and Submitting Comments

A. Obtaining Information

    Please refer to Docket ID NRC-2023-0097 when contacting the NRC 
about the availability of information for this action. You may obtain 
publicly available information related to this action by any of the 
following methods:
     Federal Rulemaking website: Go to https://www.regulations.gov and search for Docket ID NRC-2023-0097.
     NRC's Agencywide Documents Access and Management System 
(ADAMS): You may obtain publicly available documents online in the 
ADAMS Public Documents collection at https://www.nrc.gov/reading-rm/adams.html. To begin the search, select ``Begin Web-based ADAMS 
Search.'' For problems with ADAMS, please contact the NRC's Public 
Document Room (PDR) reference staff at 1-800-397-4209, 301-415-4737, or 
by email to [email protected]. The ADAMS accession number for each 
document referenced (if it is available in ADAMS) is provided the first 
time that it is mentioned in this document.
     NRC's PDR: You may examine and purchase copies of public 
documents, by appointment, at the NRC's PDR, Room P1 B35, One White 
Flint North, 11555 Rockville Pike, Rockville, Maryland 20852. To make 
an appointment to visit the PDR, please send an email to 
[email protected] or call 1-800-397-4209 or 301-415-4737, between 8 
a.m. and 4 p.m. eastern time (ET), Monday through Friday, except 
Federal holidays.

B. Submitting Comments

    The NRC encourages electronic comment submission through the 
Federal rulemaking website (https://www.regulations.gov). Please 
include Docket ID NRC-2023-0097 in your comment submission.
    The NRC cautions you not to include identifying or contact 
information that you do not want to be publicly disclosed in your 
comment submission. The NRC will post all comment submissions at 
https://www.regulations.gov as well as enter the comment submissions 
into ADAMS. The NRC does not routinely edit comment submissions to 
remove identifying or contact information.
    If you are requesting or aggregating comments from other persons 
for submission to the NRC, then you should inform those persons not to 
include identifying or contact information that they do not want to be 
publicly disclosed in their comment submission. Your request should 
state that the NRC does not routinely edit comment submissions to 
remove such information before making the comment submissions available 
to the public or entering the comment into ADAMS.

II. Additional Information

    The NRC is issuing for public comment a DG in the NRC's 
``Regulatory Guide'' series. This series was developed to describe 
methods that are acceptable to the NRC staff for implementing specific 
parts of the agency's regulations, to explain techniques that the staff 
uses in evaluating specific issues or postulated events, and to 
describe information that the staff needs in its review of applications 
for permits and licenses.
    The DG, entitled ``Damping Values for Seismic Design of Nuclear 
Power Plants,'' (ADAMS Accession No. ML22273A040) is temporarily 
identified by its task number, DG-1364.
    The proposed guide provides guidance for applicants and licensees 
on damping values that the NRC staff finds acceptable for use in the 
seismic response analysis of seismic Category I nuclear power plant 
structures, systems, and components. The specified damping values are 
intended for elastic dynamic seismic analysis where energy dissipation 
is accounted for by viscous damping. Since the issuance of revision 1 
of RG 1.61 in 2007, updated criteria related to the concrete properties 
and damping values for use in the development of in-structure response 
spectra has become available.

[[Page 38409]]

    DG-1364 addresses the updated criteria for concrete properties and 
new damping criteria for use in seismic analysis and design of nuclear 
power plants structures.
    The staff is also issuing for public comment a draft regulatory 
analysis (ADAMS Accession No. ML22273A041). The staff developed a 
regulatory analysis to assess the value of issuing or revising a 
regulatory guide as well as determine courses of action.
    As noted in the Federal Register on December 9, 2022 (87 FR 75671), 
this document is being published in the ``Proposed Rules'' section of 
the Federal Register to comply with publication requirements under 
chapter I of title 1 of the Code of Federal Regulations (CFR).

III. Backfitting, Forward Fitting, and Issue Finality

    Issuance of DG-1364 as a final RG would not constitute backfitting 
as that term is defined in 10 CFR 50.109, ``Backfitting,'' and as 
described in NRC Management Directive (MD) 8.4, ``Management of 
Backfitting, Forward Fitting, Issue Finality, and Information 
Requests,'' to affect the issue finality of an approval issued under 10 
CFR part 52, ``Licenses, Certifications, and Approvals for Nuclear 
Power Plants;'' or constitutes forward fitting as that term is defined 
and described in MD 8.4 because, as explained in DG-1364, licensees 
would not be required to comply with the positions set forth in the DG.

IV. Submitting Suggestions for Improvement of Regulatory Guides

    A member of the public may, at any time, submit suggestions to the 
NRC for improvement of existing RGs or for the development of new RGs. 
Suggestions can be submitted on the NRC's public website at https://www.nrc.gov/reading-rm/doc-collections/reg-guides/contactus.html. 
Suggestions will be considered in future updates and enhancements to 
the ``Regulatory Guide'' series.

    Dated: June 8, 2023.

    For the Nuclear Regulatory Commission.
Meraj Rahimi,
Chief, Regulatory Guide and Programs Management Branch, Division of 
Engineering, Office of Nuclear Regulatory Research.
[FR Doc. 2023-12631 Filed 6-12-23; 8:45 am]
BILLING CODE 7590-01-P


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.