Q13 Continuous Manufacturing of Drug Substances and Drug Products; International Council for Harmonisation; Guidance for Industry; Availability, 12941-12942 [2023-04212]

Agencies

• Food and Drug Administration
• DEPARTMENT OF HEALTH AND HUMAN SERVICES

[Federal Register Volume 88, Number 40 (Wednesday, March 1, 2023)]
[Notices]
[Pages 12941-12942]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2023-04212]


-----------------------------------------------------------------------

DEPARTMENT OF HEALTH AND HUMAN SERVICES

Food and Drug Administration

[Docket No. FDA-2021-D-1047]


Q13 Continuous Manufacturing of Drug Substances and Drug 
Products; International Council for Harmonisation; Guidance for 
Industry; Availability

AGENCY: Food and Drug Administration, HHS.

ACTION: Notice of availability.

-----------------------------------------------------------------------

SUMMARY: The Food and Drug Administration (FDA or Agency) is announcing 
the availability of a final guidance for industry entitled ``Q13 
Continuous Manufacturing of Drug Substances and Drug Products.'' The 
guidance was prepared under the auspices of the International Council 
for Harmonisation of Technical Requirements for Pharmaceuticals for 
Human Use (ICH). The guidance provides clarification on continuous 
manufacturing (CM) concepts and describes scientific approaches and 
regulatory considerations specific to CM of drug substances and drug 
products. The guidance is intended to provide scientific and regulatory 
considerations for the development, implementation, operation, and 
life-cycle management of CM. The guidance replaces the draft guidance 
entitled ``Q13 Continuous Manufacturing of Drug Substances and Drug 
Products'' issued on October 14, 2021. This guidance also replaces the 
draft guidance entitled ``Quality Considerations for Continuous 
Manufacturing'' issued on February 27, 2019.

DATES: The announcement of the guidance is published in the Federal 
Register on March 1, 2023.

ADDRESSES: You may submit either electronic or written comments on 
Agency guidances at any time as follows:

Electronic Submissions

    Submit electronic comments in the following way:
     Federal eRulemaking Portal: https://www.regulations.gov. 
Follow the instructions for submitting comments. Comments submitted 
electronically, including attachments, to https://www.regulations.gov 
will be posted to the docket unchanged. Because your comment will be 
made public, you are solely responsible for ensuring that your comment 
does not include any confidential information that you or a third party 
may not wish to be posted, such as medical information, your or anyone 
else's Social Security number, or confidential business information, 
such as a manufacturing process. Please note that if you include your 
name, contact information, or other information that identifies you in 
the body of your comments, that information will be posted on https://www.regulations.gov.
     If you want to submit a comment with confidential 
information that you do not wish to be made available to the public, 
submit the comment as a written/paper submission and in the manner 
detailed (see ``Written/Paper Submissions'' and ``Instructions'').

Written/Paper Submissions

    Submit written/paper submissions as follows:
     Mail/Hand Delivery/Courier (for Written/Paper 
Submissions): Dockets Management Staff (HFA-305), Food and Drug 
Administration, 5630 Fishers Lane, Rm. 1061, Rockville, MD 20852.
     For written/paper comments submitted to the Dockets 
Management Staff, FDA will post your comment, as well as any 
attachments, except for information submitted, marked and identified, 
as confidential, if submitted as detailed in ``Instructions.''
    Instructions: All submissions received must include the Docket No. 
FDA-2021-D-1047 for ``Q13 Continuous Manufacturing of Drug Substances 
and Drug Products.'' Received comments will be placed in the docket 
and, except for those submitted as ``Confidential Submissions,'' 
publicly viewable at https://www.regulations.gov or at the Dockets 
Management Staff between 9 a.m. and 4 p.m., Monday through Friday, 240-
402-7500.
     Confidential Submissions--To submit a comment with 
confidential information that you do not wish to be made publicly 
available, submit your comments only as a written/paper submission. You 
should submit two copies total. One copy will include the information 
you claim to be confidential with a heading or cover note that states 
``THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION.'' The Agency will 
review this copy, including the claimed confidential information, in 
its consideration of comments. The second copy, which will have the 
claimed confidential information redacted/blacked out, will be 
available for public viewing and posted on https://www.regulations.gov. 
Submit both copies to the Dockets Management Staff. If you do not wish 
your name and contact information to be made publicly available, you 
can provide this information on the cover sheet and not in the body of 
your comments and you must identify this information as 
``confidential.'' Any information marked as ``confidential'' will not 
be disclosed except in accordance with 21 CFR 10.20 and other 
applicable disclosure law. For more information about FDA's posting of 
comments to public dockets, see 80 FR 56469, September 18, 2015, or 
access the information at: https://www.govinfo.gov/content/pkg/FR-2015-09-18/pdf/2015-23389.pdf.
    Docket: For access to the docket to read background documents or 
the electronic and written/paper comments received, go to https://www.regulations.gov and insert the docket number, found in brackets in 
the heading of this document, into the ``Search'' box and follow the 
prompts and/or go to the Dockets Management Staff, 5630 Fishers Lane, 
Rm. 1061, Rockville, MD 20852, 240-402-7500.
    You may submit comments on any guidance at any time (see 21 CFR 
10.115(g)(5)).
    Submit written requests for single copies of this guidance to the 
Division of Drug Information, Center for Drug Evaluation and Research, 
Food and Drug Administration, 10001 New Hampshire Ave., Hillandale 
Building, 4th Floor, Silver Spring, MD 20993-0002, or the Office of 
Communication, Outreach and Development, Center for Biologics 
Evaluation and Research (CBER), Food and Drug Administration, 10903 New 
Hampshire Ave., Bldg. 71, Rm. 3128, Silver Spring, MD 20993-0002. Send 
one self-addressed adhesive label to assist that office in processing 
your requests. The guidance may also be obtained by mail by calling 
CBER at 1-800-835-4709 or 240-402-8010. See the SUPPLEMENTARY 
INFORMATION section for electronic access to the guidance document.

FOR FURTHER INFORMATION CONTACT: 
    Regarding the guidance: Sau Lee, Center for Drug Evaluation and 
Research, Food and Drug Administration, 10903 New Hampshire Ave., Bldg. 
51, Rm. 4182, Silver Spring, MD 20993-0002, 301-796-2905; or Stephen 
Ripley, Center for Biologics Evaluation and Research, Food and Drug 
Administration, 10903 New Hampshire Ave., Bldg. 71, Rm. 7301, Silver 
Spring, MD 20993-0002, 240-402-7911.

[[Page 12942]]

    Regarding the ICH: Jill Adleberg, Center for Drug Evaluation and 
Research, Food and Drug Administration, 10903 New Hampshire Ave., Bldg. 
51, Rm. 6364, Silver Spring, MD 20993-0002, 301-796-5259, 
[email protected].

SUPPLEMENTARY INFORMATION:

I. Background

    FDA is announcing the availability of a guidance for industry 
entitled ``Q13 Continuous Manufacturing of Drug Substances and Drug 
Products.'' The guidance was prepared under the auspices of ICH. ICH 
seeks to achieve greater regulatory harmonization worldwide to ensure 
that safe, effective, high-quality medicines are developed, registered, 
and maintained in the most resource-efficient manner.
    By harmonizing the regulatory requirements in regions around the 
world, ICH guidelines enhance global drug development, improve 
manufacturing standards, and increase the availability of medications. 
For example, ICH guidelines have substantially reduced duplicative 
clinical studies, prevented unnecessary animal studies, standardized 
the reporting of important safety information, and standardized 
marketing application submissions.
    The six Founding Members of the ICH are FDA; the Pharmaceutical 
Research and Manufacturers of America; the European Commission; the 
European Federation of Pharmaceutical Industries Associations; the 
Japanese Ministry of Health, Labour, and Welfare; and the Japanese 
Pharmaceutical Manufacturers Association. The Standing Members of the 
ICH Association include Health Canada and Swissmedic. ICH membership 
continues to expand to include other regulatory authorities and 
industry associations from around the world (refer to https://www.ich.org/).
    ICH works by engaging global regulatory and industry experts in a 
detailed, science-based, and consensus-driven process that results in 
the development of ICH guidelines. The regulators around the world are 
committed to consistently adopting these consensus-based guidelines, 
realizing the benefits for patients and for industry.
    As a Founding Regulatory Member of ICH, FDA plays a major role in 
the development of each of the ICH guidelines, which FDA then adopts 
and issues as guidance for industry. FDA's guidance documents do not 
establish legally enforceable responsibilities. Instead, they describe 
the Agency's current thinking on a topic and should be viewed only as 
recommendations, unless specific regulatory or statutory requirements 
are cited.
    In the Federal Register of October 14, 2021 (86 FR 57159), FDA 
published a notice announcing the availability of a draft guidance 
entitled ``Q13 Continuous Manufacturing of Drug Substances and Drug 
Products.'' The notice gave interested persons an opportunity to submit 
comments by December 13, 2021. After consideration of the comments 
received and revisions to the guideline, a final draft of the guideline 
was submitted to the ICH Assembly and endorsed by the regulatory 
agencies on November 16, 2022.
    This final guidance provides guidance on the development, 
implementation, operation, and life-cycle management of CM and provides 
clarification on CM concepts and describes scientific approaches and 
regulatory considerations specific to CM of drug substances and drug 
products. This guidance also replaces the draft guidance entitled 
``Quality Considerations for Continuous Manufacturing,'' issued on 
February 27, 2019. Many of the principles in that guidance have been 
incorporated in the guidance entitled ``Q13 Continuous Manufacturing of 
Drug Substances and Drug Products,'' rendering the 2019 guidance 
obsolete.
    This guidance is being issued consistent with FDA's good guidance 
practices regulation (21 CFR 10.115). The guidance represents the 
current thinking of FDA on ``Q13 Continuous Manufacturing of Drug 
Substances and Drug Products.'' It does not establish any rights for 
any person and is not binding on FDA or the public. You can use an 
alternative approach if it satisfies the requirements of the applicable 
statutes and regulations.

II. Paperwork Reduction Act of 1995

    While this guidance contains no collection of information, it does 
refer to previously approved FDA collections of information. Therefore, 
clearance by the Office of Management and Budget (OMB) under the 
Paperwork Reduction Act of 1995 (PRA) (44 U.S.C. 3501-3521) is not 
required for this guidance. The previously approved collections of 
information are subject to review by OMB under the PRA. The collections 
of information in 21 CFR part 312 relating to the submissions of 
investigational new drug applications have been approved under OMB 
control number 0910-0014. The collections of information in 21 CFR part 
314 relating to the submissions of new drug applications and 
abbreviated new drug applications have been approved under OMB control 
number 0910-0001. The collections of information in 21 CFR part 601 
relating to the submissions of biologics license applications have been 
approved under OMB control number 0910-0338. The collections of 
information in 21 CFR parts 210 and 211 relating to current good 
manufacturing practice have been approved under OMB control number 
0910-0139.

III. Electronic Access

    Persons with access to the internet may obtain the guidance at 
https://www.regulations.gov, https://www.fda.gov/drugs/guidance-compliance-regulatory-information/guidances-drugs, https://www.fda.gov/regulatory-information/search-fda-guidance-documents, or https://www.fda.gov/vaccines-blood-biologics/guidance-compliance-regulatory-information-biologics/biologics-guidances.

    Dated: February 24, 2023.
Lauren K. Roth,
Associate Commissioner for Policy.
[FR Doc. 2023-04212 Filed 2-28-23; 8:45 am]
BILLING CODE 4164-01-P