Airworthiness Directives; The Boeing Company Airplanes, 4920-4922 [2023-01463]

Download as PDF 4920 Proposed Rules Federal Register Vol. 88, No. 17 Thursday, January 26, 2023 This section of the FEDERAL REGISTER contains notices to the public of the proposed issuance of rules and regulations. The purpose of these notices is to give interested persons an opportunity to participate in the rule making prior to the adoption of the final rules. DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2023–0017; Project Identifier AD–2022–01418–T] RIN 2120–AA64 Airworthiness Directives; The Boeing Company Airplanes Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). AGENCY: The FAA proposes to adopt a new airworthiness directive (AD) for all The Boeing Company Model 757 airplanes. This proposed AD was prompted by the potential for cracks to start in hidden areas underneath the scuff plates in the fuselage skin and bear strap of certain doors. This proposed AD would require an inspection or a maintenance records check for repairs in the areas around the fuselage skin door cutout lower corners of certain doors, and applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products. DATES: The FAA must receive comments on this proposed AD by March 13, 2023. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • Federal eRulemaking Portal: Go to regulations.gov. Follow the instructions for submitting comments. • Fax: 202–493–2251. • Mail: U.S. Department of Transportation, Docket Operations, M– 30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE, Washington, DC 20590. • Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. AD Docket: You may examine the AD docket at regulations.gov under Docket lotter on DSK11XQN23PROD with PROPOSALS1 SUMMARY: VerDate Sep<11>2014 16:54 Jan 25, 2023 Jkt 259001 No. FAA–2023–0017; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this NPRM, any comments received, and other information. The street address for Docket Operations is listed above. Material Incorporated by Reference: • For service information identified in this NPRM, contact Boeing Commercial Airplanes, Attention: Contractual & Data Services (C&DS), 2600 Westminster Blvd., MC 110–SK57, Seal Beach, CA 90740–5600; telephone 562–797–1717; website myboeingfleet.com. • You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. It is also available at regulations.gov by searching for and locating Docket No. FAA–2023–0017. FOR FURTHER INFORMATION CONTACT: Peter Jarzomb, Aerospace Engineer, Airframe Section, FAA, Los Angeles ACO Branch, 3960 Paramount Boulevard, Lakewood, CA 90712 4137; phone: 562–627–5234; email: Peter.Jarzomb@faa.gov. SUPPLEMENTARY INFORMATION: Comments Invited The FAA invites you to send any written relevant data, views, or arguments about this proposal. Send your comments to an address listed under ADDRESSES. Include ‘‘Docket No. FAA–2023–0017; Project Identifier AD– 2022–01418–T’’ at the beginning of your comments. The most helpful comments reference a specific portion of the proposal, explain the reason for any recommended change, and include supporting data. The FAA will consider all comments received by the closing date and may amend this proposal because of those comments. Except for Confidential Business Information (CBI) as described in the following paragraph, and other information as described in 14 CFR 11.35, the FAA will post all comments received, without change, to regulations.gov, including any personal information you provide. The agency will also post a report summarizing each substantive verbal contact received about this NPRM. PO 00000 Frm 00001 Fmt 4702 Sfmt 4702 Confidential Business Information CBI is commercial or financial information that is both customarily and actually treated as private by its owner. Under the Freedom of Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public disclosure. If your comments responsive to this NPRM contain commercial or financial information that is customarily treated as private, that you actually treat as private, and that is relevant or responsive to this NPRM, it is important that you clearly designate the submitted comments as CBI. Please mark each page of your submission containing CBI as ‘‘PROPIN.’’ The FAA will treat such marked submissions as confidential under the FOIA, and they will not be placed in the public docket of this NPRM. Submissions containing CBI should be sent to Peter Jarzomb, Aerospace Engineer, Airframe Section, FAA, Los Angeles ACO Branch, 3960 Paramount Boulevard, Lakewood, CA 90712 4137; phone: 562–627–5234; email: Peter.Jarzomb@faa.gov. Any commentary that the FAA receives that is not specifically designated as CBI will be placed in the public docket for this rulemaking. Background The FAA has received a report indicating operators of Model 767 airplanes have reported cracks in the fuselage skin and bear strap under the No. 1 and No. 2 passenger entry door scuff plates at the aft lower corners of the fuselage skin door cutout. Although no cracks have been reported at these locations on Model 757 airplanes in service, both Model 757 and 767 airplanes have the potential for cracks to start in hidden areas underneath the scuff plates caused by higher fatigue stresses at the fuselage skin door cutout lower corners. In addition, similar lower door corner skin and bear strap cracks were found on the Model 757 fatigue test article at the No. 2 and No. 4 passenger entry doors, and the forward cargo door. Certain maintenance inspections do not include a step to remove the scuff plates, which also contributes to the inability to find cracks before they become critical. Cracks underneath the scuff plates in the fuselage skin and bear strap, if not addressed, could adversely affect the structural integrity of the airplane. E:\FR\FM\26JAP1.SGM 26JAP1 4921 Federal Register / Vol. 88, No. 17 / Thursday, January 26, 2023 / Proposed Rules FAA’s Determination The FAA is issuing this NPRM after determining that the unsafe condition described previously is likely to exist or develop on other products of the same type design. Related Service Information Under 1 CFR Part 51 The FAA reviewed Boeing Alert Requirements Bulletin 757–53A0119 RB, dated October 12, 2022. This service information specifies procedures for either a general visual inspection or a maintenance records check for repairs in the areas around the fuselage skin door cutout lower corners of the No. 1, No. 2, and No. 4 passenger entry doors; crew entry door; No. 1, No. 2, and No. 3 cargo doors; and main deck cargo door; and applicable on-condition actions, including repetitive low frequency and high frequency eddy current inspections for cracks in the skin or bear strap in the unrepaired areas, and crack repair. This service information is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in ADDRESSES. Proposed AD Requirements in This NPRM This proposed AD would require accomplishing the actions specified in the service information already described except for any differences identified as exceptions in the regulatory text of this proposed AD. For information on the procedures and compliance times, see this service information at regulations.gov by searching for and locating Docket No. FAA–2023–0017. Costs of Compliance The FAA estimates that this AD, if adopted as proposed, would affect 482 airplanes of U.S. registry. The FAA estimates the following costs to comply with this proposed AD: ESTIMATED COSTS Action Labor cost General visual inspection for repairs .............. 1 work-hour × $85 per hour = $85 ................. The FAA estimates the following costs to do any necessary on-condition actions that would be required based on the results of the proposed inspection. The agency has no way of determining Cost per product Parts cost $0 Cost on U.S. operators $85 $40,970 the number of aircraft that might need these on-condition actions: ON-CONDITION COSTS Labor cost Parts cost Up to 27 work-hours × $85 per hour = $2,295 ............................................................ Cost per product (*) Up to $2,295. * The FAA has received no definitive data on which to base the cost estimates for parts required for any on-condition actions specified in this proposed AD. lotter on DSK11XQN23PROD with PROPOSALS1 Authority for This Rulemaking Title 49 of the United States Code specifies the FAA’s authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency’s authority. The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action. Regulatory Findings The FAA determined that this proposed AD would not have federalism implications under Executive Order VerDate Sep<11>2014 16:54 Jan 25, 2023 Jkt 259001 13132. This proposed AD would not have a substantial direct effect on the States, on the relationship between the national Government and the States, or on the distribution of power and responsibilities among the various levels of government. For the reasons discussed above, I certify this proposed regulation: (1) Is not a ‘‘significant regulatory action’’ under Executive Order 12866, (2) Would not affect intrastate aviation in Alaska, and (3) Would not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. List of Subjects in 14 CFR Part 39 Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety. Accordingly, under the authority delegated to me by the Administrator, the FAA proposes to amend 14 CFR part 39 as follows: Frm 00002 Fmt 4702 Sfmt 4702 1. The authority citation for part 39 continues to read as follows: ■ Authority: 49 U.S.C. 106(g), 40113, 44701. § 39.13 [Amended] 2. The FAA amends § 39.13 by adding the following new airworthiness directive: ■ The Boeing Company: Docket No. FAA– 2023–0017; Project Identifier AD–2022– 01418–T. (a) Comments Due Date The FAA must receive comments on this airworthiness directive (AD) by March 13, 2023. (b) Affected ADs None. (c) Applicability The Proposed Amendment PO 00000 PART 39—AIRWORTHINESS DIRECTIVES This AD applies to all The Boeing Company Model 757–200, –200PF, –200CB, and –300 series airplanes, certificated in any category. E:\FR\FM\26JAP1.SGM 26JAP1 4922 Federal Register / Vol. 88, No. 17 / Thursday, January 26, 2023 / Proposed Rules (d) Subject Air Transport Association (ATA) of America Code 53, Fuselage. (e) Unsafe Condition This AD was prompted by the potential for cracks to start in hidden areas underneath the scuff plates in the fuselage skin and bear strap of certain doors. The FAA is issuing this AD to address cracks caused by higher fatigue stresses at the fuselage skin door cutout lower corners. This unsafe condition, if not addressed, could adversely affect the structural integrity of the airplane. (f) Compliance Comply with this AD within the compliance times specified, unless already done. lotter on DSK11XQN23PROD with PROPOSALS1 (g) Required Actions Except as specified by paragraph (h) of this AD: At the applicable times specified in the ‘‘Compliance’’ paragraph of Boeing Alert Requirements Bulletin 757–53A0119 RB, dated October 12, 2022, do all applicable actions identified in, and in accordance with, the Accomplishment Instructions of Boeing Alert Requirements Bulletin 757–53A0119 RB, dated October 12, 2022. Note 1 to paragraph (g): Guidance for accomplishing the actions required by this AD can be found in Boeing Alert Service Bulletin 757–53A0119, dated October 12, 2022, which is referred to in Boeing Alert Requirements Bulletin 757–53A0119 RB, dated October 12, 2022. (h) Exceptions to Service Information Specifications (1) Where the Compliance Time column and notes of the tables in the ‘‘Compliance’’ paragraph of Boeing Alert Requirements Bulletin 757–53A0119 RB, dated October 12, 2022, use the phrase ‘‘the original issue date of Requirements Bulletin 757–53A0119 RB,’’ this AD requires using ‘‘the effective date of this AD.’’ (2) Where Boeing Alert Requirements Bulletin 757–53A0119RB, dated October 12, 2022, specifies ‘‘General Visual Inspection (GVI) or a maintenance records check for any existing repair’’, if only a Maintenance Records Check is accomplished with no GVI, then any directly follow-on condition actions that specify a compliance time ‘‘Before further flight’’ are required prior to the accumulation of 30,000 total flight cycles, or within 3,000 flight cycles after the effective date of this AD, whichever occurs later. (3) Where Boeing Alert Requirements Bulletin 757–53A0119 RB, dated October 12, 2022, specifies contacting Boeing for repair instructions or for alternative inspections: This AD requires doing the repair, or doing the alternative inspections and applicable oncondition actions, before further flight using a method approved in accordance with the procedures specified in paragraph (i) of this AD. (i) Alternative Methods of Compliance (AMOCs) (1) The Manager, Los Angeles ACO Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures VerDate Sep<11>2014 16:54 Jan 25, 2023 Jkt 259001 found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the manager of the certification office, send it to the attention of the person identified in paragraph (j) of this AD. Information may be emailed to: 9-ANMLAACO-AMOC-Requests@faa.gov. (2) Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office. (3) An AMOC that provides an acceptable level of safety may be used for any repair, modification, or alteration required by this AD if it is approved by The Boeing Company Organization Designation Authorization (ODA) that has been authorized by the Manager, Los Angeles ACO Branch, FAA, to make those findings. To be approved, the repair method, modification deviation, or alteration deviation must meet the certification basis of the airplane, and the approval must specifically refer to this AD. (j) Related Information For more information about this AD, contact Peter Jarzomb, Aerospace Engineer, Airframe Section, FAA, Los Angeles ACO Branch, 3960 Paramount Boulevard, Lakewood, CA 90712 4137; phone: 562–627– 5234; email: Peter.Jarzomb@faa.gov. (k) Material Incorporated by Reference (1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51. (2) You must use this service information as applicable to do the actions required by this AD, unless the AD specifies otherwise. (i) Boeing Alert Requirements Bulletin 757–53A0119 RB, dated October 12, 2022. (ii) [Reserved] (3) For service information identified in this AD, contact Boeing Commercial Airplanes, Attention: Contractual & Data Services (C&DS), 2600 Westminster Blvd., MC 110–SK57, Seal Beach, CA 90740–5600; telephone 562–797–1717; website myboeingfleet.com. (4) You may view this service information at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206–231–3195. (5) You may view this service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, fr.inspection@nara.gov, or go to: www.archives.gov/federal-register/cfr/ibrlocations.html. Issued on January 11, 2023. Christina Underwood, Acting Director, Compliance & Airworthiness Division, Aircraft Certification Service. [FR Doc. 2023–01463 Filed 1–25–23; 8:45 am] BILLING CODE 4910–13–P PO 00000 Frm 00003 Fmt 4702 Sfmt 4702 DEPARTMENT OF TRANSPORTATION Office of the Secretary 14 CFR Part 399 [Docket No. DOT–OST–2022–0109] RIN 2105–AF10 Enhancing Transparency of Airline Ancillary Service Fees Office of the Secretary (OST), Department of Transportation (DOT or the Department). ACTION: Denial of Request for Extension of Comment Period. AGENCY: The U.S. Department of Transportation (Department or DOT) declines to extend the comment period beyond January 23, 2023 for its proposed rule on Enhancing Transparency of Airline Ancillary Service Fees. DATES: Comments on the rulemaking should be filed by January 23, 2023. Late-filed comments will be considered to the extent practicable. Petitions for a hearing pursuant to 14 CFR 399.75(b)(1) must also be filed by January 23, 2023. ADDRESSES: You may file comments identified by the docket number DOT– OST–2022–0109 by any of the following methods: • Federal eRulemaking Portal: go to https://www.regulations.gov and follow the online instructions for submitting comments. • Mail: Docket Management Facility, U.S. Department of Transportation, 1200 New Jersey Ave. SE, West Building Ground Floor, Room W12–140, Washington, DC 20590–0001. • Hand Delivery or Courier: West Building Ground Floor, Room W12–140, 1200 New Jersey Ave. SE, Washington, DC, between 9 a.m. and 5 p.m. ET, Monday through Friday, except Federal holidays. Commenters using this method of delivery should contact Docket Services at 202–366–9826 or 202–366–9317 before delivery to ensure staff is available to receive the delivery. • Fax: (202) 493–2251. Instructions: You must include the agency name and docket number DOT– OST–2022–0109 or the Regulatory Identification Number (RIN 2105–AF10) for the rulemaking at the beginning of your comment. All comments received will be posted without change to https://www.regulations.gov, including any personal information provided. Privacy Act: Anyone is able to search the electronic form of all comments received in any of our dockets by the name of the individual submitting the comment (or signing the comment, if SUMMARY: E:\FR\FM\26JAP1.SGM 26JAP1

Agencies

[Federal Register Volume 88, Number 17 (Thursday, January 26, 2023)]
[Proposed Rules]
[Pages 4920-4922]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2023-01463]


========================================================================
Proposed Rules
                                                Federal Register
________________________________________________________________________

This section of the FEDERAL REGISTER contains notices to the public of 
the proposed issuance of rules and regulations. The purpose of these 
notices is to give interested persons an opportunity to participate in 
the rule making prior to the adoption of the final rules.

========================================================================


Federal Register / Vol. 88, No. 17 / Thursday, January 26, 2023 / 
Proposed Rules

[[Page 4920]]



DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2023-0017; Project Identifier AD-2022-01418-T]
RIN 2120-AA64


Airworthiness Directives; The Boeing Company Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Notice of proposed rulemaking (NPRM).

-----------------------------------------------------------------------

SUMMARY: The FAA proposes to adopt a new airworthiness directive (AD) 
for all The Boeing Company Model 757 airplanes. This proposed AD was 
prompted by the potential for cracks to start in hidden areas 
underneath the scuff plates in the fuselage skin and bear strap of 
certain doors. This proposed AD would require an inspection or a 
maintenance records check for repairs in the areas around the fuselage 
skin door cutout lower corners of certain doors, and applicable on-
condition actions. The FAA is proposing this AD to address the unsafe 
condition on these products.

DATES: The FAA must receive comments on this proposed AD by March 13, 
2023.

ADDRESSES: You may send comments, using the procedures found in 14 CFR 
11.43 and 11.45, by any of the following methods:
     Federal eRulemaking Portal: Go to regulations.gov. Follow 
the instructions for submitting comments.
     Fax: 202-493-2251.
     Mail: U.S. Department of Transportation, Docket 
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New 
Jersey Avenue SE, Washington, DC 20590.
     Hand Delivery: Deliver to Mail address above between 9 
a.m. and 5 p.m., Monday through Friday, except Federal holidays.
    AD Docket: You may examine the AD docket at regulations.gov under 
Docket No. FAA-2023-0017; or in person at Docket Operations between 9 
a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD 
docket contains this NPRM, any comments received, and other 
information. The street address for Docket Operations is listed above.
    Material Incorporated by Reference:
     For service information identified in this NPRM, contact 
Boeing Commercial Airplanes, Attention: Contractual & Data Services 
(C&DS), 2600 Westminster Blvd., MC 110-SK57, Seal Beach, CA 90740-5600; 
telephone 562-797-1717; website myboeingfleet.com.
     You may view this service information at the FAA, 
Airworthiness Products Section, Operational Safety Branch, 2200 South 
216th St., Des Moines, WA. For information on the availability of this 
material at the FAA, call 206-231-3195. It is also available at 
regulations.gov by searching for and locating Docket No. FAA-2023-0017.

FOR FURTHER INFORMATION CONTACT: Peter Jarzomb, Aerospace Engineer, 
Airframe Section, FAA, Los Angeles ACO Branch, 3960 Paramount 
Boulevard, Lakewood, CA 90712 4137; phone: 562-627-5234; email: 
[email protected].

SUPPLEMENTARY INFORMATION:

Comments Invited

    The FAA invites you to send any written relevant data, views, or 
arguments about this proposal. Send your comments to an address listed 
under ADDRESSES. Include ``Docket No. FAA-2023-0017; Project Identifier 
AD-2022-01418-T'' at the beginning of your comments. The most helpful 
comments reference a specific portion of the proposal, explain the 
reason for any recommended change, and include supporting data. The FAA 
will consider all comments received by the closing date and may amend 
this proposal because of those comments.
    Except for Confidential Business Information (CBI) as described in 
the following paragraph, and other information as described in 14 CFR 
11.35, the FAA will post all comments received, without change, to 
regulations.gov, including any personal information you provide. The 
agency will also post a report summarizing each substantive verbal 
contact received about this NPRM.

Confidential Business Information

    CBI is commercial or financial information that is both customarily 
and actually treated as private by its owner. Under the Freedom of 
Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public 
disclosure. If your comments responsive to this NPRM contain commercial 
or financial information that is customarily treated as private, that 
you actually treat as private, and that is relevant or responsive to 
this NPRM, it is important that you clearly designate the submitted 
comments as CBI. Please mark each page of your submission containing 
CBI as ``PROPIN.'' The FAA will treat such marked submissions as 
confidential under the FOIA, and they will not be placed in the public 
docket of this NPRM. Submissions containing CBI should be sent to Peter 
Jarzomb, Aerospace Engineer, Airframe Section, FAA, Los Angeles ACO 
Branch, 3960 Paramount Boulevard, Lakewood, CA 90712 4137; phone: 562-
627-5234; email: [email protected]. Any commentary that the FAA 
receives that is not specifically designated as CBI will be placed in 
the public docket for this rulemaking.

Background

    The FAA has received a report indicating operators of Model 767 
airplanes have reported cracks in the fuselage skin and bear strap 
under the No. 1 and No. 2 passenger entry door scuff plates at the aft 
lower corners of the fuselage skin door cutout. Although no cracks have 
been reported at these locations on Model 757 airplanes in service, 
both Model 757 and 767 airplanes have the potential for cracks to start 
in hidden areas underneath the scuff plates caused by higher fatigue 
stresses at the fuselage skin door cutout lower corners. In addition, 
similar lower door corner skin and bear strap cracks were found on the 
Model 757 fatigue test article at the No. 2 and No. 4 passenger entry 
doors, and the forward cargo door. Certain maintenance inspections do 
not include a step to remove the scuff plates, which also contributes 
to the inability to find cracks before they become critical. Cracks 
underneath the scuff plates in the fuselage skin and bear strap, if not 
addressed, could adversely affect the structural integrity of the 
airplane.

[[Page 4921]]

FAA's Determination

    The FAA is issuing this NPRM after determining that the unsafe 
condition described previously is likely to exist or develop on other 
products of the same type design.

Related Service Information Under 1 CFR Part 51

    The FAA reviewed Boeing Alert Requirements Bulletin 757-53A0119 RB, 
dated October 12, 2022. This service information specifies procedures 
for either a general visual inspection or a maintenance records check 
for repairs in the areas around the fuselage skin door cutout lower 
corners of the No. 1, No. 2, and No. 4 passenger entry doors; crew 
entry door; No. 1, No. 2, and No. 3 cargo doors; and main deck cargo 
door; and applicable on-condition actions, including repetitive low 
frequency and high frequency eddy current inspections for cracks in the 
skin or bear strap in the unrepaired areas, and crack repair. This 
service information is reasonably available because the interested 
parties have access to it through their normal course of business or by 
the means identified in ADDRESSES.

Proposed AD Requirements in This NPRM

    This proposed AD would require accomplishing the actions specified 
in the service information already described except for any differences 
identified as exceptions in the regulatory text of this proposed AD. 
For information on the procedures and compliance times, see this 
service information at regulations.gov by searching for and locating 
Docket No. FAA-2023-0017.

Costs of Compliance

    The FAA estimates that this AD, if adopted as proposed, would 
affect 482 airplanes of U.S. registry. The FAA estimates the following 
costs to comply with this proposed AD:

                                                 Estimated Costs
----------------------------------------------------------------------------------------------------------------
                                                                                     Cost per      Cost on U.S.
                Action                         Labor cost           Parts cost        product        operators
----------------------------------------------------------------------------------------------------------------
General visual inspection for repairs.  1 work-hour x $85 per                 $0             $85         $40,970
                                         hour = $85.
----------------------------------------------------------------------------------------------------------------

    The FAA estimates the following costs to do any necessary on-
condition actions that would be required based on the results of the 
proposed inspection. The agency has no way of determining the number of 
aircraft that might need these on-condition actions:

                           On-Condition Costs
------------------------------------------------------------------------
            Labor cost                Parts cost      Cost per product
------------------------------------------------------------------------
Up to 27 work-hours x $85 per hour             (*)  Up to $2,295.
 = $2,295.
------------------------------------------------------------------------
* The FAA has received no definitive data on which to base the cost
  estimates for parts required for any on-condition actions specified in
  this proposed AD.

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. Subtitle VII: Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    The FAA is issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701: General requirements. 
Under that section, Congress charges the FAA with promoting safe flight 
of civil aircraft in air commerce by prescribing regulations for 
practices, methods, and procedures the Administrator finds necessary 
for safety in air commerce. This regulation is within the scope of that 
authority because it addresses an unsafe condition that is likely to 
exist or develop on products identified in this rulemaking action.

Regulatory Findings

    The FAA determined that this proposed AD would not have federalism 
implications under Executive Order 13132. This proposed AD would not 
have a substantial direct effect on the States, on the relationship 
between the national Government and the States, or on the distribution 
of power and responsibilities among the various levels of government.
    For the reasons discussed above, I certify this proposed 
regulation:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Would not affect intrastate aviation in Alaska, and
    (3) Would not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

The Proposed Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA proposes to amend 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13   [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive:

The Boeing Company: Docket No. FAA-2023-0017; Project Identifier AD-
2022-01418-T.

(a) Comments Due Date

    The FAA must receive comments on this airworthiness directive 
(AD) by March 13, 2023.

(b) Affected ADs

    None.

(c) Applicability

    This AD applies to all The Boeing Company Model 757-200, -200PF, 
-200CB, and -300 series airplanes, certificated in any category.

[[Page 4922]]

(d) Subject

    Air Transport Association (ATA) of America Code 53, Fuselage.

(e) Unsafe Condition

    This AD was prompted by the potential for cracks to start in 
hidden areas underneath the scuff plates in the fuselage skin and 
bear strap of certain doors. The FAA is issuing this AD to address 
cracks caused by higher fatigue stresses at the fuselage skin door 
cutout lower corners. This unsafe condition, if not addressed, could 
adversely affect the structural integrity of the airplane.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Required Actions

    Except as specified by paragraph (h) of this AD: At the 
applicable times specified in the ``Compliance'' paragraph of Boeing 
Alert Requirements Bulletin 757-53A0119 RB, dated October 12, 2022, 
do all applicable actions identified in, and in accordance with, the 
Accomplishment Instructions of Boeing Alert Requirements Bulletin 
757-53A0119 RB, dated October 12, 2022.
    Note 1 to paragraph (g): Guidance for accomplishing the actions 
required by this AD can be found in Boeing Alert Service Bulletin 
757-53A0119, dated October 12, 2022, which is referred to in Boeing 
Alert Requirements Bulletin 757-53A0119 RB, dated October 12, 2022.

(h) Exceptions to Service Information Specifications

    (1) Where the Compliance Time column and notes of the tables in 
the ``Compliance'' paragraph of Boeing Alert Requirements Bulletin 
757-53A0119 RB, dated October 12, 2022, use the phrase ``the 
original issue date of Requirements Bulletin 757-53A0119 RB,'' this 
AD requires using ``the effective date of this AD.''
    (2) Where Boeing Alert Requirements Bulletin 757-53A0119RB, 
dated October 12, 2022, specifies ``General Visual Inspection (GVI) 
or a maintenance records check for any existing repair'', if only a 
Maintenance Records Check is accomplished with no GVI, then any 
directly follow-on condition actions that specify a compliance time 
``Before further flight'' are required prior to the accumulation of 
30,000 total flight cycles, or within 3,000 flight cycles after the 
effective date of this AD, whichever occurs later.
    (3) Where Boeing Alert Requirements Bulletin 757-53A0119 RB, 
dated October 12, 2022, specifies contacting Boeing for repair 
instructions or for alternative inspections: This AD requires doing 
the repair, or doing the alternative inspections and applicable on-
condition actions, before further flight using a method approved in 
accordance with the procedures specified in paragraph (i) of this 
AD.

(i) Alternative Methods of Compliance (AMOCs)

    (1) The Manager, Los Angeles ACO Branch, FAA, has the authority 
to approve AMOCs for this AD, if requested using the procedures 
found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your 
request to your principal inspector or responsible Flight Standards 
Office, as appropriate. If sending information directly to the 
manager of the certification office, send it to the attention of the 
person identified in paragraph (j) of this AD. Information may be 
emailed to: [email protected].
    (2) Before using any approved AMOC, notify your appropriate 
principal inspector, or lacking a principal inspector, the manager 
of the responsible Flight Standards Office.
    (3) An AMOC that provides an acceptable level of safety may be 
used for any repair, modification, or alteration required by this AD 
if it is approved by The Boeing Company Organization Designation 
Authorization (ODA) that has been authorized by the Manager, Los 
Angeles ACO Branch, FAA, to make those findings. To be approved, the 
repair method, modification deviation, or alteration deviation must 
meet the certification basis of the airplane, and the approval must 
specifically refer to this AD.

(j) Related Information

    For more information about this AD, contact Peter Jarzomb, 
Aerospace Engineer, Airframe Section, FAA, Los Angeles ACO Branch, 
3960 Paramount Boulevard, Lakewood, CA 90712 4137; phone: 562-627-
5234; email: [email protected].

(k) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the 
incorporation by reference (IBR) of the service information listed 
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
    (2) You must use this service information as applicable to do 
the actions required by this AD, unless the AD specifies otherwise.
    (i) Boeing Alert Requirements Bulletin 757-53A0119 RB, dated 
October 12, 2022.
    (ii) [Reserved]
    (3) For service information identified in this AD, contact 
Boeing Commercial Airplanes, Attention: Contractual & Data Services 
(C&DS), 2600 Westminster Blvd., MC 110-SK57, Seal Beach, CA 90740-
5600; telephone 562-797-1717; website myboeingfleet.com.
    (4) You may view this service information at the FAA, 
Airworthiness Products Section, Operational Safety Branch, 2200 
South 216th St., Des Moines, WA. For information on the availability 
of this material at the FAA, call 206-231-3195.
    (5) You may view this service information that is incorporated 
by reference at the National Archives and Records Administration 
(NARA). For information on the availability of this material at 
NARA, [email protected], or go to: www.archives.gov/federal-register/cfr/ibr-locations.html.

    Issued on January 11, 2023.
Christina Underwood,
Acting Director, Compliance & Airworthiness Division, Aircraft 
Certification Service.
[FR Doc. 2023-01463 Filed 1-25-23; 8:45 am]
BILLING CODE 4910-13-P

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.