Agency Information Collection Activities: Requests for Comments; Clearance of New Approval of Information Collection: ICAO CO2, 75118-75119 [2022-26547]
Download as PDF
75118
Federal Register / Vol. 87, No. 234 / Wednesday, December 7, 2022 / Notices
be mailed or delivered to GTRAA, Attn:
Matt Dowell, A.A.E, Executive Director,
2080 Airport Rd, Columbus, MS 39701
Interested persons may inspect the
request and supporting documents by
contacting the FAA at the address listed
under FOR FURTHER INFORMATION
CONTACT.
FOR FURTHER INFORMATION CONTACT:
David Shumate, Program Manager,
Jackson Airports District Office, 100
West Cross St., Suite B, Jackson, MS
39208–2307. The land release request
may be reviewed in person at this same
location.
Issued in Jackson, Mississippi, on
December 1, 2022.
Rans D. Black,
Manager, Jackson Airports District Office,
Southern Region.
[FR Doc. 2022–26509 Filed 12–6–22; 8:45 am]
BILLING CODE 4910–13–P
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
[Docket No. FAA–2022–0193]
Agency Information Collection
Activities: Requests for Comments;
Clearance of New Approval of
Information Collection: ICAO CO2
Certification Database
Federal Aviation
Administration (FAA), DOT.
ACTION: Notice and request for
comments.
AGENCY:
In accordance with the
Paperwork Reduction Act of 1995, FAA
invites public comments about our
intention to request the Office of
Management and Budget (OMB)
approval for a new information
collection. The initial Federal Register
Notice with a 60-day comment period
soliciting comments on the following
collection of information was published
on April 26, 2022. The collection
involves the possibility for airplane
manufacturers, for which a newly built
airplane is subject to the applicability of
Annex 16, Volume III of the Convention
on Civil Aviation (hereinafter the
‘‘Chicago Convention’’), to submit an
electronic datasheet to the FAA for
posting to the CO2 Certification
Database (CO2DB). The information to
be collected will be necessary because
of FAA’s commitment to help (a)
provide publicly available data on the
CO2 Metric Value (MV) which
represents a measure of fuel burn
performance of airplane types against
CO2 technology/design standards, (b)
track and communicate the
ddrumheller on DSK6VXHR33PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
19:54 Dec 06, 2022
Jkt 259001
improvement in airplane CO2 MVs over
time and (c) provide an incentive to
improve the CO2 MV of airplane types.
DATES: Written comments should be
submitted by January 6, 2023.
ADDRESSES: Written comments and
recommendations for the proposed
information collection should be sent
within 30 days of publication of this
notice to www.reginfo.gov/public/do/
PRAMain. Find this particular
information collection by selecting
‘‘Currently under 30-day Review—Open
for Public Comments’’ or by using the
search function.
FOR FURTHER INFORMATION CONTACT:
Laszlo Windhoffer by email at:
Laszlo.Windhoffer@faa.gov; phone:
202–267–4741.
SUPPLEMENTARY INFORMATION:
Supporting Statement A
Public Comments Invited: You are
asked to comment on any aspect of this
information collection, including (a)
Whether the proposed collection of
information is necessary for FAA’s
performance; (b) the accuracy of the
estimated burden; (c) ways for FAA to
enhance the quality, utility and clarity
of the information collection; and (d)
ways that the burden could be
minimized without reducing the quality
of the collected information.
OMB Control Number: 2120–XXXX.
Title: ICAO CO2 Certification Database
(CO2DB).
Form Numbers: FAA Form 1240–6.
Type of Review: Clearance of a new
information collection.
Background: The initial Federal
Register Notice with a 60-day comment
period soliciting comments on the
following collection of information was
published on April 26, 2022 (87 FR
24606).
In March 2017, the International Civil
Aviation Organization (ICAO) Council
adopted the Volume III of Annex 16 of
the Chicago Convention (Environmental
Protection) for the implementation of a
new airplane CO2 emissions standard.
The Standard will apply to new airplane
type designs from 2020, and to airplane
type designs already in-production as of
2023. Those in-production airplane
which by 2028 do not meet the standard
will no longer be able to be produced
unless their designs are sufficiently
modified to comply with the inproduction standard.
To support the implementation of
Annex 16 Volume III, ICAO agreed that,
similar to noise and engine emissions,
an ICAO CO2 Certification Database
(CO2DB) should be developed and
continuously maintained in a publicly
accessible manner. The U.S. Federal
PO 00000
Frm 00097
Fmt 4703
Sfmt 4703
Aviation Administration will host the
new database on behalf of ICAO.
The aim of the CO2DB is to (a) Provide
publicly available data on the CO2
Metric Value (MV) which represents a
measure of fuel burn performance of
airplane types against CO2 technology/
design standards, (b) Track and
communicate the improvement in
airplane CO2 MVs over time and (c)
Provide an incentive to improve the CO2
MV of airplane types.
The collection of data towards the
CO2DB is expected to leverage the
Airplane Airworthiness Certification
process, which includes; airplane
performance measurement, computation
of relevant metrics (e.g., CO2 MV) and
submission of the information to the
Certificating Authority (CA) of the State
of Design. As part of the airworthiness
certification process, the data/
information is reviewed by the CA and
approved. Given that the submission of
information into the CO2DB is
voluntary, it is expected that the
applicant (e.g., airplane manufacturer)
will decide to submit a CO2DB
Datasheet to its CA and ultimately to the
U.S. FAA. If the applicant decides to
submit information to the CO2DB, the
applicant will prepare a CO2DB
Datasheet by using the CO2DB Datasheet
Template that will be publicly available
via the CO2DB web page expected to be
hosted on the FAA Office of
Environment and Energy website. Once
the U.S. FAA collects the CO2DB
Datasheets it may conduct an
information check to identify any gross
errors or mistakes. Similar to other
ICAO environment databases, the entity
submitting the information (in this case
the applicant) will be solely responsible
for the accuracy of the information. If
there are any questions about
submissions, the U.S. FAA will
communicate with the applicant to
attempt to address any issues.
CO2DB Datasheets will then be
integrated into the CO2DB and the
records of changes will be updated. It is
expected that the database will be
available for download in a common
table format (e.g., Microsoft Excel file)
as well as a collection of the submitted
CO2DB Datasheets. Additional
background and supporting information
will also be available on the CO2DB
website along with a Support Function
communication mechanism (e.g., email
address).
Respondents: Respondents will be
airplane manufacturers (or
‘‘applicants’’) subject to the
applicability of Annex 16, Volume III of
the Chicago Convention. From the
outset, FAA expects about 3 U.S.
airplane applicants to submit CO2DB
E:\FR\FM\07DEN1.SGM
07DEN1
Federal Register / Vol. 87, No. 234 / Wednesday, December 7, 2022 / Notices
Datasheets for their certified airplanes.
It should be noted that additional
respondents from outside the United
States (i.e., Airplane Manufacturers for
which the Certificating Authority is
another ICAO Member State than the
United States) are expected to submit
CO2DB Datasheets to the CO2DB for
their certified airplane. These non-US
applicants were assumed to be outside
the scope of the burden analysis
contained in Supporting Statement A
and were therefore not included as
respondents.
Frequency: If they decide to submit
information to the CO2DB, the
manufacturers will submit data after the
certification of an airplane. It is
expected that manufacturers would
submit one CO2DB Datasheet for each
airplane model. As described in
Supporting Statement A and based on
historical frequency of airplane
certification, each U.S. manufacturer
could be expected to certificate up to
two new models every three years.
Thus, in mathematical terms, the FAA
would expect to receive an average of
two thirds of one datasheet per year and
per respondent.
Estimated Average Burden per
Response: It is expected that filling and
submitting a CO2DB Datasheet could
take approximately 2.5 hours.
Estimated Total Annual Burden:
Based on the above, FAA expects that
the annual submission of CO2DB
Datasheet by U.S. airplane
manufacturers could take approximately
5 hours for an average of 2 submissions
per year ($368 in filing and submission
costs). This is estimated for all 3 U.S.
airplane manufacturers.
Issued in Washington, DC, on December 1,
2022.
Kevin Welsh,
Executive Director, Office of Environment and
Energy, Federal Aviation Administration.
[FR Doc. 2022–26547 Filed 12–6–22; 8:45 am]
BILLING CODE 4910–13–P
DEPARTMENT OF TRANSPORTATION
Federal Railroad Administration
ddrumheller on DSK6VXHR33PROD with NOTICES
Notice of Funding Opportunity for the
Federal-State Partnership for Intercity
Passenger Rail Program
Federal Railroad
Administration (FRA), Department of
Transportation (DOT).
ACTION: Notice of Funding Opportunity
(NOFO or notice).
AGENCY:
This notice (FSP-National)
details the application requirements and
procedures to obtain grant funding for
SUMMARY:
VerDate Sep<11>2014
19:54 Dec 06, 2022
Jkt 259001
projects not located on the Northeast
Corridor under the Federal-State
Partnership for Intercity Passenger Rail
Program (FSP Program) for Fiscal Year
2022. The FSP-National notice solicits
applications for FSP funds made
available by the Consolidated
Appropriations Act, 2022, and the
Infrastructure Investment and Jobs Act.
The opportunity described in this notice
is made available under Assistance
Listings Number 20.326, ‘‘Federal-State
Partnership for Intercity Passenger
Rail.’’
DATES: Applications for funding under
this solicitation are due no later than 5
p.m. ET, March 7, 2023. Applications
that are incomplete or received after 5
p.m. ET, on March 7, 2023 will not be
considered for funding. See Section D of
this notice for additional information on
the application process.
ADDRESSES: Applications must be
submitted via www.Grants.gov. Only
applicants who comply with all
submission requirements described in
this notice and submit applications
through www.Grants.gov will be eligible
for award. For any supporting
application materials that an applicant
is unable to submit via www.Grants.gov
(such as oversized engineering
drawings), an applicant may submit an
original and two (2) copies to Deborah
Kobrin, Office of Rail Program
Development, Federal Railroad
Administration, 1200 New Jersey Ave
SE, Washington, DC 20590; or Mr.
Sergio Coronado, Office of Rail Program
Development, Federal Railroad
Administration, 55 Broadway,
Cambridge, MA 02142. However, due to
delays caused by enhanced screening of
mail delivered via the U.S. Postal
Service, applicants are advised to use
other means of conveyance (such as
courier service) to assure timely receipt
of materials before the application
deadline.
FOR FURTHER INFORMATION CONTACT: For
further information concerning this
Notice, please contact the FRA NOFO
Support program staff via email at FRANOFO-Support@dot.gov. If additional
assistance is needed, you may contact
Mr. Douglas Gascon, Office of Policy
and Planning, Federal Railroad
Administration, 1200 New Jersey
Avenue SE, Room W38–212,
Washington, DC 20590; email:
douglas.gascon@dot.gov; or telephone:
202–493–2039; or Mr. Sergio Coronado,
Office of Rail Program Development,
Federal Railroad Administration, 55
Broadway, Cambridge, MA 02142;
email: Sergio.Coronado@dot.gov;
telephone: 617–571–1213; or Ms.
Deborah Kobrin, Office of Rail Program
PO 00000
Frm 00098
Fmt 4703
Sfmt 4703
75119
Development, Federal Railroad
Administration, 1200 New Jersey Ave
SE, Room W33–311, Washington, DC
20590; email: deborah.kobrin@dot.gov;
telephone: 202–493–0765.
SUPPLEMENTARY INFORMATION: Notice to
applicants: FRA recommends that
applicants read this notice in its entirety
prior to preparing application materials.
Definitions of key terms used
throughout the NOFO are provided in
Section A(2) below. These key terms are
capitalized throughout the NOFO. There
are several administrative and specific
eligibility requirements described
herein with which applicants must
comply. Additionally, applicants should
note that the required Project Narrative
component of the application package
may not exceed 25 pages in length.
Table of Contents
A. Program Description
B. Federal Award Information
C. Eligibility Information
D. Application and Submission Information
E. Application Review Information
F. Federal Award Administration
Information
G. Federal Awarding Agency Contacts
H. Other Information
A. Program Description
1. Overview
Our nation’s rail network is a critical
component of the U.S. transportation
system and economy. The FSP Program
provides a Federal funding opportunity
to improve American passenger rail
assets to expand or establish new
intercity passenger rail service,
including privately operated intercity
passenger rail service if an eligible
applicant is involved, reduce the state of
good repair backlog, improve
performance, and enhance rail safety.
The purpose of this notice is to solicit
applications for projects not located on
the Northeast Corridor (NEC) through
the competitive FSP Program.
This FSP-National NOFO describes
funding available, application
submission requirements, and the
selection and evaluation criteria for
projects not located on the Northeast
Corridor. The Infrastructure Investment
and Jobs Act (Pub. L. 117–58, November
14, 2021) (IIJA) provided distinct
selection and evaluation criteria for
projects located on the NEC and for
projects not located on the NEC. FRA
will publish a separate Notice for
projects located on the NEC. Those
projects are not eligible for funding
under this announcement.
The FSP Program is authorized in
Sections 22106 and 22307 of the IIJA,
codified at 49 U.S.C. 24911, and this
NOFO is funded by IIJA supplemental
E:\FR\FM\07DEN1.SGM
07DEN1
Agencies
[Federal Register Volume 87, Number 234 (Wednesday, December 7, 2022)]
[Notices]
[Pages 75118-75119]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2022-26547]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
[Docket No. FAA-2022-0193]
Agency Information Collection Activities: Requests for Comments;
Clearance of New Approval of Information Collection: ICAO CO2
Certification Database
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Notice and request for comments.
-----------------------------------------------------------------------
SUMMARY: In accordance with the Paperwork Reduction Act of 1995, FAA
invites public comments about our intention to request the Office of
Management and Budget (OMB) approval for a new information collection.
The initial Federal Register Notice with a 60-day comment period
soliciting comments on the following collection of information was
published on April 26, 2022. The collection involves the possibility
for airplane manufacturers, for which a newly built airplane is subject
to the applicability of Annex 16, Volume III of the Convention on Civil
Aviation (hereinafter the ``Chicago Convention''), to submit an
electronic datasheet to the FAA for posting to the CO2
Certification Database (CO2DB). The information to be
collected will be necessary because of FAA's commitment to help (a)
provide publicly available data on the CO2 Metric Value (MV)
which represents a measure of fuel burn performance of airplane types
against CO2 technology/design standards, (b) track and
communicate the improvement in airplane CO2 MVs over time
and (c) provide an incentive to improve the CO2 MV of
airplane types.
DATES: Written comments should be submitted by January 6, 2023.
ADDRESSES: Written comments and recommendations for the proposed
information collection should be sent within 30 days of publication of
this notice to www.reginfo.gov/public/do/PRAMain. Find this particular
information collection by selecting ``Currently under 30-day Review--
Open for Public Comments'' or by using the search function.
FOR FURTHER INFORMATION CONTACT: Laszlo Windhoffer by email at:
[email protected]; phone: 202-267-4741.
SUPPLEMENTARY INFORMATION:
Supporting Statement A
Public Comments Invited: You are asked to comment on any aspect of
this information collection, including (a) Whether the proposed
collection of information is necessary for FAA's performance; (b) the
accuracy of the estimated burden; (c) ways for FAA to enhance the
quality, utility and clarity of the information collection; and (d)
ways that the burden could be minimized without reducing the quality of
the collected information.
OMB Control Number: 2120-XXXX.
Title: ICAO CO2 Certification Database
(CO2DB).
Form Numbers: FAA Form 1240-6.
Type of Review: Clearance of a new information collection.
Background: The initial Federal Register Notice with a 60-day
comment period soliciting comments on the following collection of
information was published on April 26, 2022 (87 FR 24606).
In March 2017, the International Civil Aviation Organization (ICAO)
Council adopted the Volume III of Annex 16 of the Chicago Convention
(Environmental Protection) for the implementation of a new airplane
CO2 emissions standard. The Standard will apply to new
airplane type designs from 2020, and to airplane type designs already
in-production as of 2023. Those in-production airplane which by 2028 do
not meet the standard will no longer be able to be produced unless
their designs are sufficiently modified to comply with the in-
production standard.
To support the implementation of Annex 16 Volume III, ICAO agreed
that, similar to noise and engine emissions, an ICAO CO2
Certification Database (CO2DB) should be developed and
continuously maintained in a publicly accessible manner. The U.S.
Federal Aviation Administration will host the new database on behalf of
ICAO.
The aim of the CO2DB is to (a) Provide publicly
available data on the CO2 Metric Value (MV) which represents
a measure of fuel burn performance of airplane types against
CO2 technology/design standards, (b) Track and communicate
the improvement in airplane CO2 MVs over time and (c)
Provide an incentive to improve the CO2 MV of airplane
types.
The collection of data towards the CO2DB is expected to
leverage the Airplane Airworthiness Certification process, which
includes; airplane performance measurement, computation of relevant
metrics (e.g., CO2 MV) and submission of the information to
the Certificating Authority (CA) of the State of Design. As part of the
airworthiness certification process, the data/information is reviewed
by the CA and approved. Given that the submission of information into
the CO2DB is voluntary, it is expected that the applicant
(e.g., airplane manufacturer) will decide to submit a CO2DB
Datasheet to its CA and ultimately to the U.S. FAA. If the applicant
decides to submit information to the CO2DB, the applicant
will prepare a CO2DB Datasheet by using the CO2DB
Datasheet Template that will be publicly available via the CO2DB web
page expected to be hosted on the FAA Office of Environment and Energy
website. Once the U.S. FAA collects the CO2DB Datasheets it
may conduct an information check to identify any gross errors or
mistakes. Similar to other ICAO environment databases, the entity
submitting the information (in this case the applicant) will be solely
responsible for the accuracy of the information. If there are any
questions about submissions, the U.S. FAA will communicate with the
applicant to attempt to address any issues.
CO2DB Datasheets will then be integrated into the
CO2DB and the records of changes will be updated. It is
expected that the database will be available for download in a common
table format (e.g., Microsoft Excel file) as well as a collection of
the submitted CO2DB Datasheets. Additional background and
supporting information will also be available on the CO2DB
website along with a Support Function communication mechanism (e.g.,
email address).
Respondents: Respondents will be airplane manufacturers (or
``applicants'') subject to the applicability of Annex 16, Volume III of
the Chicago Convention. From the outset, FAA expects about 3 U.S.
airplane applicants to submit CO2DB
[[Page 75119]]
Datasheets for their certified airplanes. It should be noted that
additional respondents from outside the United States (i.e., Airplane
Manufacturers for which the Certificating Authority is another ICAO
Member State than the United States) are expected to submit
CO2DB Datasheets to the CO2DB for their certified
airplane. These non-US applicants were assumed to be outside the scope
of the burden analysis contained in Supporting Statement A and were
therefore not included as respondents.
Frequency: If they decide to submit information to the
CO2DB, the manufacturers will submit data after the
certification of an airplane. It is expected that manufacturers would
submit one CO2DB Datasheet for each airplane model. As
described in Supporting Statement A and based on historical frequency
of airplane certification, each U.S. manufacturer could be expected to
certificate up to two new models every three years. Thus, in
mathematical terms, the FAA would expect to receive an average of two
thirds of one datasheet per year and per respondent.
Estimated Average Burden per Response: It is expected that filling
and submitting a CO2DB Datasheet could take approximately
2.5 hours.
Estimated Total Annual Burden: Based on the above, FAA expects that
the annual submission of CO2DB Datasheet by U.S. airplane manufacturers
could take approximately 5 hours for an average of 2 submissions per
year ($368 in filing and submission costs). This is estimated for all 3
U.S. airplane manufacturers.
Issued in Washington, DC, on December 1, 2022.
Kevin Welsh,
Executive Director, Office of Environment and Energy, Federal Aviation
Administration.
[FR Doc. 2022-26547 Filed 12-6-22; 8:45 am]
BILLING CODE 4910-13-P