Foreign-Trade Zone (FTZ) 72-Indianapolis, Indiana, Notification of Proposed Production Activity, Mercury Marine (Marine Service, Repair, Winterization, or Replacement Kits), Brownsburg, Indiana, 62787-62790 [2022-22438]
Download as PDF
<![CDATA[
lotter on DSK11XQN23PROD with NOTICES1
Federal Register / Vol. 87, No. 199 / Monday, October 17, 2022 / Notices
will provide a detailed narrative
assessment of current TEFAP reach
within the State/Territory and will
identify any remote, rural, Tribal, and/
or low-income areas that are currently
underserved by TEFAP. Applicants will
also provide an explanation of how the
assessment was conducted and provide
any attachments (e.g., a map of served/
underserved areas within the State/
Territory, or a map of TEFAP ERAs
overlaid with a map of remote, rural,
Tribal, and/or low-income areas) as
necessary. If an applicant plans to
utilize grants funds to complete such an
assessment, they only need to indicate
that in their response and will not be
required to submit an assessment in the
application.
• Applicants that received a Reach
and Resiliency—Round 1 grant will
provide a brief summary of planned
Round 1 project activities and an update
on implementation of those activities,
indicating how the proposed Round 2
project plan will expand or complement
Round 1 activities (if applicable). If
Reach and Resiliency—Round 1 grant
funds were utilized to conduct an
assessment of TEFAP reach within the
State/Territory, this update must
include a brief description of any
interim or final results of the Round 1
assessment, or a description of progress
made on the assessment thus far.
• Applicants will provide the
definitions of ‘‘remote,’’ ‘‘rural,’’
‘‘Tribal,’’ and ‘‘low-income’’ that will be
utilized for the proposed Round 2
project and an explanation of why
specific definitions were chosen.
• Applicants will describe how they
consulted with relevant stakeholders
and/or utilized available data to form
their Round 2 project plans.
• Applicants will state the percentage
of requested Round 2 grant funds that
will be kept at the State level or that will
be expended on State expenses.
• Applicants will indicate interest in
requesting additional funding past the
maximum eligible funding amount
outlined for their State/Territory in the
Request for Applications. If interested in
additional funding, applicants will state
an amount of additional funds that the
applicant would be able to utilize on
allowable grant activities. Should
additional funding be available, FNS
will utilize responses to these question
to award additional funds to interested
applicants.
Supplemental Reporting Questions
• If applicable, applicants will
provide a list of any remote, rural,
Tribal, and/or low-income areas that
have been incorporated into the State’s
TEFAP network or that are being better
VerDate Sep<11>2014
17:35 Oct 14, 2022
Jkt 259001
served as as a result of Round 2 grant
funding, to date.
• If grant funds were utilized to
conduct an assessment of current
TEFAP reach within the State/Territory,
and such assessment was finalized
within the last reporting period,
applicants will be asked to provide a
narrative summary of the assessment.
The summary should include a list of
any remote, rural, Tribal, and/or lowincome areas that were identified as
underserved via the assessment, how
‘‘remote,’’ ‘‘rural,’’ ‘‘Tribal,’’ and ‘‘lowincome’’ areas were defined, and an
explanation of how the assessment was
conducted.
Time Required To Complete
Application Package
The time required to complete this
information collection, meaning the
TEFAP grant application package, is
estimated to average approximately
88.22 hours per application. This
burden estimate includes the time for
reviewing instructions, searching
existing data sources, gathering and
maintaining the data needed, and
completing and reviewing the collection
of information for all aspects of the
TEFAP Reach and Resiliency—Round 2
Grant, including the pre-award, postaward, and recordkeeping burden.
The supporting statement for OMB
Control Number: 0584–0512 (Expiration
Date: July 31, 2025) explicitly states that
if FNS decides to use the uniform grant
application package, FNS will note in
the grant solicitation that applicants
must use the uniform grant application
package, and that the information
collection has already been approved by
OMB. If FNS determines that it needs
grant applicants to provide additional
information not contained in the
uniform package, then FNS will publish
at least a 30-day notice soliciting
comments on its proposal to collect
different or additional information
before issuing the grant solicitation.
FNS is publishing this notice to meet
that requirement.
FNS will utilize these comments to
adjust the collection of additional
information as necessary.
Tameka Owens,
Assistant Administrator, Food and Nutrition
Service.
[FR Doc. 2022–22415 Filed 10–14–22; 8:45 am]
BILLING CODE 3410–30–P
COMMISSION ON CIVIL RIGHTS
Sunshine Act Meetings
United States Commission on
Civil Rights.
AGENCY:
PO 00000
Frm 00006
Fmt 4703
Sfmt 4703
62787
Notice of Commission public
business meeting.
ACTION:
Friday, October 21, 2022, 10:00
a.m. EST.
ADDRESSES: Meeting to take place
telephonically and is open to the public
via phone at 1–866–269–4260;
Confirmation Code: 1776207.
FOR FURTHER INFORMATION CONTACT:
Angelia Rorison: 202–376–8371;
publicaffairs@usccr.gov.
SUPPLEMENTARY INFORMATION: In
accordance with the Government in
Sunshine Act (5 U.S.C. 552b), the
Commission on Civil Rights is holding
a meeting to discuss the Commission’s
business for the month. This business
meeting is open to the public. Computer
assisted real-time transcription (CART)
will be provided. The web link to access
CART (in English) on Friday, October
21, 2022, is https://www.streamtext.net/
player?event=USCCR. Please note that
CART is text-only translation that
occurs in real time during the meeting
and is not an exact transcript.
DATES:
Meeting Agenda
I. Approval of Agenda
II. Business Meeting
A. Presentations by State Advisory
Committee Chairs on Released
Reports and Memorandums
B. Discussion and Vote on Advisory
Committee Appointments
C. Discussion and Vote on Advisory
Committee (SAC) Report
D. Discussion and Vote on FY 2023
SE Anti-Asian Racism Planning
Documents
E. Management and Operations
• Staff Director’s Report
Adjourn Meeting
Dated: October 13, 2022.
Angelia Rorison,
USCCR Media and Communications Director.
[FR Doc. 2022–22635 Filed 10–13–22; 4:15 pm]
BILLING CODE 6335–01–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–47–2022]
Foreign-Trade Zone (FTZ) 72—
Indianapolis, Indiana, Notification of
Proposed Production Activity, Mercury
Marine (Marine Service, Repair,
Winterization, or Replacement Kits),
Brownsburg, Indiana
Mercury Marine submitted a
notification of proposed production
activity to the FTZ Board (the Board) for
its facility in Brownsburg, Indiana,
within FTZ 72. The notification
E:\FR\FM\17OCN1.SGM
17OCN1
lotter on DSK11XQN23PROD with NOTICES1
62788
Federal Register / Vol. 87, No. 199 / Monday, October 17, 2022 / Notices
conforming to the requirements of the
Board’s regulations (15 CFR 400.22) was
received on October 4, 2022.
Pursuant to 15 CFR 400.14(b), FTZ
production activity would be limited to
the specific foreign-status material(s)/
component(s) and specific finished
product(s) described in the submitted
notification (summarized below) and
subsequently authorized by the Board.
The benefits that may stem from
conducting production activity under
FTZ procedures are explained in the
background section of the Board’s
website—accessible via www.trade.gov/
ftz.
The proposed finished products
include: kits for marine engines
(catalyst-exhaust pack; hydraulic fluid
power pump; tubing; cover; heater;
housing kits used in water heaters; for
filtering or purifying water; seal; drive
hub); kits of rigid tubes, pipes, hoses, or
fittings (of polymers of ethylene; of
plastics); kits of tubes, pipes, hoses, or
fittings, of polymers of propylene; kits
of tubes, pipes, or hoses (of plastic; of
plastic, with fittings and non-reinforced;
of non-reinforced vulcanized rubber; of
textile reinforced vulcanized rubber;
with fittings, of textile reinforced
vulcanized rubber); kits of non-rigid
plastic tubes, pipes, or hoses, reinforced
with metal or PVC; repair kits (of plastic
fittings; of vulcanized rubber gaskets,
washers, seals, grommets, or mounts; of
connectors for electrical circuits); sets
and kits of decals for labeling; air deck
kits, tube kits, trailering lock kits, of
plastic; kits of reinforced vulcanized
rubber tubes, pipes, or hoses, with
fittings; kits of metal reinforced
vulcanized rubber tubes, pipes, or
hoses, with fittings; kits of reinforced
rubber hose assemblies, with fittings;
kits of reinforced rubber hose
assemblies; kits of endless transmission
belts of trapezoidal cross section Vbelts, V-ribbed, not exceeding 180 cm;
kits of transmission belts or belting, of
vulcanized rubber; bow bag kits; kits of
plywood, veneered panels, or laminated
wood; kits of paper brochures or
instruction manuals; kits of repair
manuals, repair instruction sheets,
brochures, leaflets, or printed matter;
replacement kits (of twine, cordage,
ropes, or cables, of synthetic fibers; of
plugs or sockets; of cushions for marine
use); gasket maintenance or repair kits;
kits of tubes, pipes, or hollow profiles,
of seamless alloy steel; kits of circular
cross section tubes, pipes, or hollow
profiles (of welded stainless steel; of
welded alloy steel); kits of bends,
sleeves, or threaded elbows (of stainless
steel; of iron or steel); kits of drain fit
assemblies or fittings for stainless steel
tubes and pipes; kits of tube or pipe
VerDate Sep<11>2014
17:35 Oct 14, 2022
Jkt 259001
fittings (of iron or steel; of aluminum
alloys); connector kits of stranded wire,
ropes, or cables, of iron or steel, not
electrically insulated; safety latch repair
kits for timing or roller chains, of iron
or steel; kits of screws, seals, springs,
threaded screws and bolts, rod-links,
bushings, nuts, non-threaded washers,
rivets, non-threaded cotters or cotter
pins, of iron or steel; starter drive repair
kits of threaded nuts, of iron or steel;
propeller hardware kits of non-threaded
spring washers or lock washers, of iron
or steel; kits of pins, rings, or clips, of
iron or steel, non-threaded; remote
control repair kits (of helical springs, of
iron or steel; of springs or leaves for
springs, of iron or steel); ratchet repair
kits, drain plug kits, tilt lock lever kits,
spacer kits, band kits, plate kits, clamp
kits, coupler kits, bushing kits, pin kits,
or rod end kits for marine engines, of
iron or steel; water tube kits of refined
copper tubes or pipes; tube seal kits of
copper alloy tubes or pipes; connection
kits or fitting assembly kits, of copper
alloys; kits of non-threaded washers,
prop nuts, screws, bolts, of copper, iron,
or steel, with heads of copper; bushing
repair kits, of copper; kits of screws,
bolts, nuts, washers, of aluminum;
service kits of anodes and drain tubes,
of aluminum; kits of anodes and anode
plates, of zinc; water hose repair kits;
kits of hand tools; kits of vices; kits of
clamps; kits of tiebars; kits of clamp
brackets; kits of plate assemblies; kits of
power trim; kits of swivel brackets; kits
of base metal mountings; repair kits (for
bracket mountings, of base metal; for
marine engine pumps for both water
and fuel; for needle roller bearings; for
cylindrical roller bearings; for prop
shafts, shift shafts, transmission shafts,
or cranks; for lower unit bearing carriers
or housed bearings; for bearing
housings; for gears or bearings; for
clutch lower units, gear lower units, or
shaft couplings; for transmissions, coils,
gear sets, shift rods, flywheels, control
levers, or clutches; for gaskets or joints,
of metal sheeting, combined with one or
two more layers of metal; for rotary
converters for electric motors or electric
generating sets; for starters, motors, and
dual purpose starter generators; for
shafts, covers, armatures, or end caps for
electrical ignition of marine motors; for
valves, conversion kits, gear shift kits,
attaching kits, or spring kits for
electrical equipment; for coils,
harnesses, rigging, cables, or ignition
wiring sets for marine vessels; for wiring
or wiring assemblies fitted with
connectors); service repair kits, O-ring
set kits, cylinder head kits, cylinder
block kits, transom kits, oil line kits,
float needle kits, steering attaching kits,
PO 00000
Frm 00007
Fmt 4703
Sfmt 4703
throttle control kits, shift shaft kits,
valve intake kits, piston kits, tiller
conversion kits, lever kits, cowl kits,
connecting rod kits, manifold kits, riser
kits, or carburetor kits for spark-ignition
internal combustion piston engines;
repower kits; exhaust kits; shaft guard
kits; power trim kits, overhaul kits, or
cylinder assembly trim kits for linear
acting hydraulic power engines or
motors; jet pump kits for hydraulic
power engines and motors; bell housing
kits; lever tilt stop kits; recoil starter kits
and assemblies; end cap kits, manifold
kits, spring kits, overhaul kits, handle
kits, repair kits, gimbal ring kits,
transom repair kits, starter kits, bracket
kits, shift cable kits, shift handle kits, or
extension arm kits for marine engines
and motors; kits of pumps (hand; grease;
fuel; primer bulb; oil; bilge; aerator;
hand- or foot-operated air; air; vacuum);
water pump kits, pump repair kits,
pump service kits, fuel pump kits, and
kits for lubricating or cooling pumps for
marine internal combustion piston
engines; kits of centrifugal pumps for
liquids; impeller kits; vapor separator
kits; housing kits; seal kits; kits of turbo
chargers for engines; compressor or
turbo kits for air or vacuum pumps; kits
of heat exchanger units; kits of heat
exchanger assemblies; separator kits,
filter kits, service kits, oil or fuel filter
kits, and intake air filter kits for internal
combustion engines; kits for filtering or
purifying hydraulic fuel and separating
oil, and water or air filtering kits for
marine engines and equipment; vessel
view kits; automatic data processing
machine kits; kits of valves (for
oleohydraulic or pneumatic
transmissions; water; check (nonreturn);
safety; relief); float valve kits, regulator
kits, throttle body kits, injector kits,
solenoid kits, diaphragm kits, needle
valve kits, purge vent kits, or
thermostatic control valve kits for
marine engine pipes and fuel tanks;
repair kits, thermostat kits, control valve
kits, and valve kits for pipes and tanks;
kits of bearings (ball; tapered roller);
bearing installation kits; kits of
flywheels or pulleys; gasket sets;
gearcase seal kits; joint kits of metal
sheeting; kits of propellers; kits of
electric motors and generators, with an
output not exceeding 37.5W; tilt repair
kits or trim repair kits for shift actuators
and DC electric motors or generators
with an output not exceeding 750W;
charging kits; static converter kits;
electromagnet kits; service kits for spark
plugs; flywheel kits; ignition magneto
kits; magneto-dynamo kits; magnetic
flywheel kits; kits of distributors; kits of
ignition coils; alternator kits; generator
kits; voltage regulator kits, relay kits or
E:\FR\FM\17OCN1.SGM
17OCN1
lotter on DSK11XQN23PROD with NOTICES1
Federal Register / Vol. 87, No. 199 / Monday, October 17, 2022 / Notices
voltage-current regulator kits with cutout relays; kits of transmission
equipment or voice, image, or data
reception equipment for communication
in a wire or wireless network; kits of
GPS unit or radio navigational aid
equipment; monitor kits or indicator
panel kits with LCDs or LEDs; horn kits,
lamp kits, or electric sound or visual
signaling equipment kits; trim sender
kits; variable resistor kits; fuse kits;
automatic circuit breaker kits; kits of
relays, for a voltage not exceeding 60V;
relay kits; switch kits to switch or
protect electrical circuits; kits of boards,
panels or consoles for electric control or
distribution of electricity; shim kits,
fuse block holder kits, rigging kits, or
kits of electrical equipment for
switching or protecting electrical
circuits, boards, or panels; kits of
diodes, not photosensitive or lightemitting; anode kits for electroplating a
marine engine to prevent corrosion;
handle kits; throttle kits; helm kits;
conversion kits; electric control unit
kits; kits of electrical insulators for wire
harnesses; kits of plastic insulating
fittings; kits of thermometers or
pyrometers; lube bottle kits, dip stick
kits, oil gauge kits, or kits of instruments
and equipment for measuring or
checking the flow or level of liquids;
sensor kits, oil pressure kits, or kits of
instruments and equipment for
measuring or checking pressure of
liquids or gases; gauge kits, sensor kits,
or kits of instruments and equipment for
measuring and checking flow level and
pressure of liquids or gases; pressure
kits, float kits, shaft kits, bezel kits, or
kits of instruments and equipment for
measuring flow level or pressure of
liquids or gases; tachometer kits;
speedometer kits; stroboscope kits;
speedometer pickup kits; tachometer
module kits; bezel gauge kits for
revolution counters; production counter
kits; odometer kits; kits of instruments
and equipment for measuring and
checking voltage, current, resistance, or
power; crank position sensor kits, level
kits, voltage gauge kits, or current sensor
kits for marine engine instruments; trim
sensor kits, monitor kits, sensor kits, or
indicator kits for measuring or checking
marine engine performance; thermostat
kits; automatic regulating or controlling
kits for marine engine instrument and
equipment performance; rotor kits or
housing kits for automatic regulating or
controlling marine engine instrument
and equipment performance; kits of
seats (with wooden frames; with frames
not of metal, wood, or bamboo); and,
plastic furniture kits (duty rate ranges
from duty-free to 9.9%).
VerDate Sep<11>2014
17:35 Oct 14, 2022
Jkt 259001
The proposed foreign-status materials
and components include: prepared
glues and prepared adhesives based of
rubber or plastic (including artificial
resins); catalysts for marine engines;
rigid tubes, pipes, hoses, or fittings (of
polymers of ethylene; of plastics); tubes,
pipes, or hoses (of plastic; of plastic,
with fittings); non-rigid tubes, pipes, or
hoses, of plastic, reinforced with metal
or PVC; plastic components (fittings;
self-adhesive labels; sheet, strip, or film;
stoppers; lids; caps; closures; emblems
or ornaments for boats; gaskets; covers;
inserts; clamps; clips; bushings;
washers; plugs; insulating fittings; seats
with frames; furniture); sacks and bags
(of polymers of ethylene; of plastics, not
polymers of ethylene); plates, sheet,
strip, and profile shapes of vulcanized,
noncellular rubber; non-reinforced
vulcanized rubber tubes, pipes, or hoses
(with or without fittings); reinforced
vulcanized rubber tubes, pipes, or
hoses, with fittings; metal reinforced
vulcanized rubber tubes, pipes, or
hoses, with fittings; textile reinforced
vulcanized rubber tubes, pipes, or hoses
(with or without fittings); reinforced
rubber hose assemblies (with or without
fittings); vulcanized rubber components
(endless transmission belts of
trapezoidal cross section V-belts (Vribbed, not exceeding 180 cm; not Vribbed, not exceeding 180 cm; not Vribbed, of an outside circumference
exceeding 180 cm but not exceeding 240
cm); transmission belts, belting, or
endless synchronous belts, with an
outside circumference exceeding 60 cm
but not exceeding 150 cm; transmission
belts or belting; gaskets; washers; seals;
plugs; grommets; mounts; fittings; Orings; bushings); belonging bags or
sacks, with an outer surface of plastic
sheeting; plywood; veneered panels;
laminated wood; paper or paperboard,
cut to size or shape; printed books,
brochures, leaflets, or printed matter;
twine, starter rope, safety rope, cordage,
ropes, or cables, of synthetic fibers;
gaskets, of carbon fibers; tubes, pipes, or
hollow profiles, of seamless alloy steel;
welded circular cross sections of tubes,
pipes, or hollow profiles (of stainless
steel; of alloy steel); stainless steel
components (threaded elbows; bends;
sleeves; tube or pipe fittings); iron or
steel components (threaded elbows;
bends; sleeves; tube or pipe fittings;
stranded wire, ropes, or cables, not
electrically insulated; timing chains or
roller chains; coach screws; self-tapping
screws; threaded screws, bolts, nuts,
rods, and bushings; non-threaded
washers, spring washers, lock washers,
cotters and cotter pins, pins, rings, and
clips; rivets; helical springs; springs or
PO 00000
Frm 00008
Fmt 4703
Sfmt 4703
62789
leaves for springs; washers; clips;
fittings; hooks; straps; spacers; rings;
bushings; plates); copper components
(tubes or pipes (of refined copper; of
copper alloys); tube or pipe fittings, of
copper alloys; stranded wire or cables;
plugs; clips; ends; retainers; bushings;
elbows; covers, plugs, connectors,
plates, rings, caps, holders, or housings
for electrical equipment for switching or
protecting electrical circuits boards or
panels; winding wire); non-threaded
washers, pins, retaining rings, screws,
bolts, or nuts of copper, iron, or steel
with heads of copper; aluminum
components (tubes or pipes, of
aluminum alloys; tube or pipe fittings;
screws; bolts; nuts; washers; spacers;
bushings; plates; sleeves; clamps;
inserts; heads, collars, nose cones,
columns, or covers for electric motors or
electric generating sets and rotary
converters); anodes, of zinc; handoperated spanners or wrenches
(adjustable and non-adjustable); socket
wrenches, drives, or extensions; hand
tools; base metal components (padlocks;
locks; mountings; bracket mountings or
fixtures); components for marine
engines (powerheads; drives; transoms;
valves; inserts; covers; collars; plates;
end caps; hydraulic fluid power pumps;
turbo chargers; water filtering strainers,
purifying strainers, or screen struts;
housings; screens; filtering equipment;
solenoids; triggers; plugs; rotors; contact
sets; rev limiters; starting equipment;
carbon-film fixed internal resistors;
internal resistors); pistons, shift shafts,
shift levers, fuel bowls, throttle controls,
levers, covers, retainers, or shafts for
spark-ignition internal combustion
piston engines; linear acting hydraulic
power engines and motors; hydraulic
power engines and motors; recoil
starters; blocks, link rods, actuators,
covers, tubes, pistons, or scrapers for
marine engines and motors; various
pumps (hand; grease; fuel; primer bulb;
oil; fuel, lubricating, or cooling medium
for internal combustion piston engines;
centrifugal, bilge, or aerator for liquids;
hand- or foot- operated air; air; vacuum);
impellers, inserts, liners, bases,
faceplates, shafts, or grommets for
marine engine pumps; shields,
manifolds, compressors, adapters, or
restrictors for air or vacuum pumps;
heat exchanger units; heat exchanger
assemblies; covers, plates, connections,
or housings to protect sections of a
marine engine; filters for internal
combustion engines (oil; fuel; intake
air); automatic data processing
machines; shock absorbers, handles,
tillers, swivel brackets, or starters to
support the use of marine engines; tie
rods; levers; pucks; plates; pads; links;
E:\FR\FM\17OCN1.SGM
17OCN1
lotter on DSK11XQN23PROD with NOTICES1
62790
Federal Register / Vol. 87, No. 199 / Monday, October 17, 2022 / Notices
handles of mounts; front or back
mounts; various valves (pressurereducing; for oleohydraulic or
pneumatic transmissions; check
(nonreturn); safety; relief); regulators,
throttle bodies, solenoids, purge vents,
valves, floats, nozzles, dampers, covers,
joints, or brackets for pipes and tanks;
steel components (ball bearings; tapered
roller bearings; spherical roller bearings;
needle roller bearings; cylindrical roller
bearings; needles; rollers); tapered roller
bearings, ball bearing washers, thrust
bearings, or bearing spacers, of steel,
aluminum, or plastic; transmission
shafts, shift shafts, or cranks; bearing
carriers; housed bearings; bearing
housings; gears or gearing; flywheels;
pulleys; clutches; shaft couplings; thrust
rings, drain plugs, flush plugs, control
levers, gearcase covers, ideal exhaust
covers, shift arms, shift levers, forward
gears, bevel gears, joints, sprockets for
transmission shafts, cranks, flywheels,
clutches, or shaft couplings, of copper,
steel, or aluminum; gaskets or joints, of
metal sheeting; propellers, of stainless
steel or aluminum; steel or aluminum
components (seals; fittings; thrust
washers; hubs; shafts, covers, armatures,
end caps, clamps, pinions, or bushings
for electrical ignition or starting
equipment); electric motors and
generators with an output not exceeding
37.5W; DC electric motors and
generators with an output not exceeding
75kW; static converters; spark plugs;
ignition magnetos; magneto-dynamos;
magnetic flywheels; distributors;
ignition coils; starter motors or dual
purpose starter generators; generators;
alternators; equipment for transmission
or reception of voice, images, or other
data for communication in a wire or
wireless network; GPS units; radio
navigational aid equipment; antennas;
antenna reflectors; indicator panels with
LCDs or LEDs; horns, buzzer, lamps,
and equipment for electric sound or
visual signaling; dielectric electrical
capacitors, of plastic or paper; variable
resistors; fuses; motor overload
protectors; electrical circuits protectors;
relays, for a voltage not exceeding 60V;
relays; switches to switch or protect
electrical circuits; lamp-holders; plugs;
sockets; equipment to switch circuits or
circuit protectors; boards, panels, or
consoles for electric control or
distribution of electricity; electrical
filament lamps, not ultraviolet or
infrared; diodes, not photosensitive or
light-emitting; anode assemblies;
electrical control units or modules;
covers, housings, gear shifts, link rods,
handles, joints, bezels, triggers, knobs,
barrels, rollers, racks, throttle levers,
plates, carriers, levers, or pivots, of
VerDate Sep<11>2014
17:35 Oct 14, 2022
Jkt 259001
electrical equipment for marine engines,
of base metal or plastic; ignition wiring
sets or wiring sets for ships, vessels, or
boats; wiring assemblies fitted with
connectors, not exceeding 1,000V;
electric conductors not fitted with
connectors (not exceeding 1,000V;
exceeding 1,000V); electrical insulators;
sensors, tri-ducers, live scopes for ice
fishing, GPS, sonar fish finders and
underwater navigational instruments;
caps, bezels, port covers, gaskets, or
doors for compasses, navigational
instruments and equipment, of plastic
or elastomers; thermometers;
pyrometers; dip sticks; various gauges
(fuel level; oil level; oil pressure; water
pressure; compression pressure; trim);
water flow detectors; gauges and sensors
for measuring or checking the flow,
level, or pressure of liquids or gases;
adaptors, bezels, covers, or shafts, for
measuring the flow, level, or pressure of
liquids or gases; speedometers;
tachometers; stroboscopes; mechanical
senders, tachometers, bezels, odometers,
or speedometers for revolution counters
or production counters; multimeters
without a recording device; voltmeters
or battery voltage analyzers; crank
position sensors; laser levels; tip and
tell sensors; gauges, sensors, testers,
probes, or indicators measuring or
checking marine engine performance;
thermostats; temperature and map
sensors for automatic regulating or
controlling the thermostats or locators
in marine engines; housings, covers, and
adaptors for thermostats; seats with
wooden frames; and, cushions for boats,
of foams, vinyl, and elastomers (duty
rate ranges from duty-free to 12.5%).
The request indicates that certain
materials/components are subject to
duties under Section 232 of the Trade
Expansion Act of 1962 (Section 232) or
Section 301 of the Trade Act of 1974
(Section 301), depending on the country
of origin. The applicable Section 232
and Section 301 decisions require
subject merchandise to be admitted to
FTZs in privileged foreign status (19
CFR 146.41).
Public comment is invited from
interested parties. Submissions shall be
addressed to the Board’s Executive
Secretary and sent to: ftz@trade.gov. The
closing period for their receipt is
November 28, 2022.
A copy of the notification will be
available for public inspection in the
‘‘Online FTZ Information System’’
section of the Board’s website.
For further information, contact
Juanita Chen at Juanita.Chen@trade.gov.
PO 00000
Frm 00009
Fmt 4703
Sfmt 4703
Dated: October 11, 2022.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2022–22438 Filed 10–14–22; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–48–2022]
Foreign-Trade Zone (FTZ) 82—Mobile,
Alabama; Notification of Proposed
Production Activity; Aker Solutions,
Inc. (Subsea Oil and Gas Systems);
Mobile, Alabama
Aker Solutions, Inc., submitted a
notification of proposed production
activity to the FTZ Board (the Board) for
its facility in Mobile, Alabama under
FTZ 82. The notification conforming to
the requirements of the Board’s
regulations (15 CFR 400.22) was
received on October 6, 2022.
Pursuant to 15 CFR 400.14(b), FTZ
production activity would be limited to
the specific foreign-status material(s)/
component(s) described in the
submitted notification (summarized
below) and subsequently authorized by
the Board. The benefits that may stem
from conducting production activity
under FTZ procedures are explained in
the background section of the Board’s
website—accessible via www.trade.gov/
ftz. The proposed material(s)/
component(s) would be added to the
production authority that the Board
previously approved for the operation,
as reflected on the Board’s website.
The proposed foreign-status material
is steel wire rope (duty-free). The
request indicates that steel wire rope is
subject to duties under section 232 of
the Trade Expansion Act of 1962
(section 232) and section 301 of the
Trade Act of 1974 (section 301),
depending on the country of origin. The
applicable section 232 and section 301
decisions require subject merchandise
to be admitted to FTZs in privileged
foreign status (19 CFR 146.41).
Public comment is invited from
interested parties. Submissions shall be
addressed to the Board’s Executive
Secretary and sent to: ftz@trade.gov. The
closing period for their receipt is
November 28, 2022.
A copy of the notification will be
available for public inspection in the
‘‘Online FTZ Information System’’
section of the Board’s website.
For further information, contact
Christopher Wedderburn at
Chris.Wedderburn@trade.gov.
E:\FR\FM\17OCN1.SGM
17OCN1
]]>Agencies
[Federal Register Volume 87, Number 199 (Monday, October 17, 2022)]
[Notices]
[Pages 62787-62790]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2022-22438]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B-47-2022]
Foreign-Trade Zone (FTZ) 72--Indianapolis, Indiana, Notification
of Proposed Production Activity, Mercury Marine (Marine Service,
Repair, Winterization, or Replacement Kits), Brownsburg, Indiana
Mercury Marine submitted a notification of proposed production
activity to the FTZ Board (the Board) for its facility in Brownsburg,
Indiana, within FTZ 72. The notification
[[Page 62788]]
conforming to the requirements of the Board's regulations (15 CFR
400.22) was received on October 4, 2022.
Pursuant to 15 CFR 400.14(b), FTZ production activity would be
limited to the specific foreign-status material(s)/component(s) and
specific finished product(s) described in the submitted notification
(summarized below) and subsequently authorized by the Board. The
benefits that may stem from conducting production activity under FTZ
procedures are explained in the background section of the Board's
website--accessible via www.trade.gov/ftz.
The proposed finished products include: kits for marine engines
(catalyst-exhaust pack; hydraulic fluid power pump; tubing; cover;
heater; housing kits used in water heaters; for filtering or purifying
water; seal; drive hub); kits of rigid tubes, pipes, hoses, or fittings
(of polymers of ethylene; of plastics); kits of tubes, pipes, hoses, or
fittings, of polymers of propylene; kits of tubes, pipes, or hoses (of
plastic; of plastic, with fittings and non-reinforced; of non-
reinforced vulcanized rubber; of textile reinforced vulcanized rubber;
with fittings, of textile reinforced vulcanized rubber); kits of non-
rigid plastic tubes, pipes, or hoses, reinforced with metal or PVC;
repair kits (of plastic fittings; of vulcanized rubber gaskets,
washers, seals, grommets, or mounts; of connectors for electrical
circuits); sets and kits of decals for labeling; air deck kits, tube
kits, trailering lock kits, of plastic; kits of reinforced vulcanized
rubber tubes, pipes, or hoses, with fittings; kits of metal reinforced
vulcanized rubber tubes, pipes, or hoses, with fittings; kits of
reinforced rubber hose assemblies, with fittings; kits of reinforced
rubber hose assemblies; kits of endless transmission belts of
trapezoidal cross section V-belts, V-ribbed, not exceeding 180 cm; kits
of transmission belts or belting, of vulcanized rubber; bow bag kits;
kits of plywood, veneered panels, or laminated wood; kits of paper
brochures or instruction manuals; kits of repair manuals, repair
instruction sheets, brochures, leaflets, or printed matter; replacement
kits (of twine, cordage, ropes, or cables, of synthetic fibers; of
plugs or sockets; of cushions for marine use); gasket maintenance or
repair kits; kits of tubes, pipes, or hollow profiles, of seamless
alloy steel; kits of circular cross section tubes, pipes, or hollow
profiles (of welded stainless steel; of welded alloy steel); kits of
bends, sleeves, or threaded elbows (of stainless steel; of iron or
steel); kits of drain fit assemblies or fittings for stainless steel
tubes and pipes; kits of tube or pipe fittings (of iron or steel; of
aluminum alloys); connector kits of stranded wire, ropes, or cables, of
iron or steel, not electrically insulated; safety latch repair kits for
timing or roller chains, of iron or steel; kits of screws, seals,
springs, threaded screws and bolts, rod-links, bushings, nuts, non-
threaded washers, rivets, non-threaded cotters or cotter pins, of iron
or steel; starter drive repair kits of threaded nuts, of iron or steel;
propeller hardware kits of non-threaded spring washers or lock washers,
of iron or steel; kits of pins, rings, or clips, of iron or steel, non-
threaded; remote control repair kits (of helical springs, of iron or
steel; of springs or leaves for springs, of iron or steel); ratchet
repair kits, drain plug kits, tilt lock lever kits, spacer kits, band
kits, plate kits, clamp kits, coupler kits, bushing kits, pin kits, or
rod end kits for marine engines, of iron or steel; water tube kits of
refined copper tubes or pipes; tube seal kits of copper alloy tubes or
pipes; connection kits or fitting assembly kits, of copper alloys; kits
of non-threaded washers, prop nuts, screws, bolts, of copper, iron, or
steel, with heads of copper; bushing repair kits, of copper; kits of
screws, bolts, nuts, washers, of aluminum; service kits of anodes and
drain tubes, of aluminum; kits of anodes and anode plates, of zinc;
water hose repair kits; kits of hand tools; kits of vices; kits of
clamps; kits of tiebars; kits of clamp brackets; kits of plate
assemblies; kits of power trim; kits of swivel brackets; kits of base
metal mountings; repair kits (for bracket mountings, of base metal; for
marine engine pumps for both water and fuel; for needle roller
bearings; for cylindrical roller bearings; for prop shafts, shift
shafts, transmission shafts, or cranks; for lower unit bearing carriers
or housed bearings; for bearing housings; for gears or bearings; for
clutch lower units, gear lower units, or shaft couplings; for
transmissions, coils, gear sets, shift rods, flywheels, control levers,
or clutches; for gaskets or joints, of metal sheeting, combined with
one or two more layers of metal; for rotary converters for electric
motors or electric generating sets; for starters, motors, and dual
purpose starter generators; for shafts, covers, armatures, or end caps
for electrical ignition of marine motors; for valves, conversion kits,
gear shift kits, attaching kits, or spring kits for electrical
equipment; for coils, harnesses, rigging, cables, or ignition wiring
sets for marine vessels; for wiring or wiring assemblies fitted with
connectors); service repair kits, O-ring set kits, cylinder head kits,
cylinder block kits, transom kits, oil line kits, float needle kits,
steering attaching kits, throttle control kits, shift shaft kits, valve
intake kits, piston kits, tiller conversion kits, lever kits, cowl
kits, connecting rod kits, manifold kits, riser kits, or carburetor
kits for spark-ignition internal combustion piston engines; repower
kits; exhaust kits; shaft guard kits; power trim kits, overhaul kits,
or cylinder assembly trim kits for linear acting hydraulic power
engines or motors; jet pump kits for hydraulic power engines and
motors; bell housing kits; lever tilt stop kits; recoil starter kits
and assemblies; end cap kits, manifold kits, spring kits, overhaul
kits, handle kits, repair kits, gimbal ring kits, transom repair kits,
starter kits, bracket kits, shift cable kits, shift handle kits, or
extension arm kits for marine engines and motors; kits of pumps (hand;
grease; fuel; primer bulb; oil; bilge; aerator; hand- or foot-operated
air; air; vacuum); water pump kits, pump repair kits, pump service
kits, fuel pump kits, and kits for lubricating or cooling pumps for
marine internal combustion piston engines; kits of centrifugal pumps
for liquids; impeller kits; vapor separator kits; housing kits; seal
kits; kits of turbo chargers for engines; compressor or turbo kits for
air or vacuum pumps; kits of heat exchanger units; kits of heat
exchanger assemblies; separator kits, filter kits, service kits, oil or
fuel filter kits, and intake air filter kits for internal combustion
engines; kits for filtering or purifying hydraulic fuel and separating
oil, and water or air filtering kits for marine engines and equipment;
vessel view kits; automatic data processing machine kits; kits of
valves (for oleohydraulic or pneumatic transmissions; water; check
(nonreturn); safety; relief); float valve kits, regulator kits,
throttle body kits, injector kits, solenoid kits, diaphragm kits,
needle valve kits, purge vent kits, or thermostatic control valve kits
for marine engine pipes and fuel tanks; repair kits, thermostat kits,
control valve kits, and valve kits for pipes and tanks; kits of
bearings (ball; tapered roller); bearing installation kits; kits of
flywheels or pulleys; gasket sets; gearcase seal kits; joint kits of
metal sheeting; kits of propellers; kits of electric motors and
generators, with an output not exceeding 37.5W; tilt repair kits or
trim repair kits for shift actuators and DC electric motors or
generators with an output not exceeding 750W; charging kits; static
converter kits; electromagnet kits; service kits for spark plugs;
flywheel kits; ignition magneto kits; magneto-dynamo kits; magnetic
flywheel kits; kits of distributors; kits of ignition coils; alternator
kits; generator kits; voltage regulator kits, relay kits or
[[Page 62789]]
voltage-current regulator kits with cut-out relays; kits of
transmission equipment or voice, image, or data reception equipment for
communication in a wire or wireless network; kits of GPS unit or radio
navigational aid equipment; monitor kits or indicator panel kits with
LCDs or LEDs; horn kits, lamp kits, or electric sound or visual
signaling equipment kits; trim sender kits; variable resistor kits;
fuse kits; automatic circuit breaker kits; kits of relays, for a
voltage not exceeding 60V; relay kits; switch kits to switch or protect
electrical circuits; kits of boards, panels or consoles for electric
control or distribution of electricity; shim kits, fuse block holder
kits, rigging kits, or kits of electrical equipment for switching or
protecting electrical circuits, boards, or panels; kits of diodes, not
photosensitive or light-emitting; anode kits for electroplating a
marine engine to prevent corrosion; handle kits; throttle kits; helm
kits; conversion kits; electric control unit kits; kits of electrical
insulators for wire harnesses; kits of plastic insulating fittings;
kits of thermometers or pyrometers; lube bottle kits, dip stick kits,
oil gauge kits, or kits of instruments and equipment for measuring or
checking the flow or level of liquids; sensor kits, oil pressure kits,
or kits of instruments and equipment for measuring or checking pressure
of liquids or gases; gauge kits, sensor kits, or kits of instruments
and equipment for measuring and checking flow level and pressure of
liquids or gases; pressure kits, float kits, shaft kits, bezel kits, or
kits of instruments and equipment for measuring flow level or pressure
of liquids or gases; tachometer kits; speedometer kits; stroboscope
kits; speedometer pickup kits; tachometer module kits; bezel gauge kits
for revolution counters; production counter kits; odometer kits; kits
of instruments and equipment for measuring and checking voltage,
current, resistance, or power; crank position sensor kits, level kits,
voltage gauge kits, or current sensor kits for marine engine
instruments; trim sensor kits, monitor kits, sensor kits, or indicator
kits for measuring or checking marine engine performance; thermostat
kits; automatic regulating or controlling kits for marine engine
instrument and equipment performance; rotor kits or housing kits for
automatic regulating or controlling marine engine instrument and
equipment performance; kits of seats (with wooden frames; with frames
not of metal, wood, or bamboo); and, plastic furniture kits (duty rate
ranges from duty-free to 9.9%).
The proposed foreign-status materials and components include:
prepared glues and prepared adhesives based of rubber or plastic
(including artificial resins); catalysts for marine engines; rigid
tubes, pipes, hoses, or fittings (of polymers of ethylene; of
plastics); tubes, pipes, or hoses (of plastic; of plastic, with
fittings); non-rigid tubes, pipes, or hoses, of plastic, reinforced
with metal or PVC; plastic components (fittings; self-adhesive labels;
sheet, strip, or film; stoppers; lids; caps; closures; emblems or
ornaments for boats; gaskets; covers; inserts; clamps; clips; bushings;
washers; plugs; insulating fittings; seats with frames; furniture);
sacks and bags (of polymers of ethylene; of plastics, not polymers of
ethylene); plates, sheet, strip, and profile shapes of vulcanized,
noncellular rubber; non-reinforced vulcanized rubber tubes, pipes, or
hoses (with or without fittings); reinforced vulcanized rubber tubes,
pipes, or hoses, with fittings; metal reinforced vulcanized rubber
tubes, pipes, or hoses, with fittings; textile reinforced vulcanized
rubber tubes, pipes, or hoses (with or without fittings); reinforced
rubber hose assemblies (with or without fittings); vulcanized rubber
components (endless transmission belts of trapezoidal cross section V-
belts (V-ribbed, not exceeding 180 cm; not V-ribbed, not exceeding 180
cm; not V-ribbed, of an outside circumference exceeding 180 cm but not
exceeding 240 cm); transmission belts, belting, or endless synchronous
belts, with an outside circumference exceeding 60 cm but not exceeding
150 cm; transmission belts or belting; gaskets; washers; seals; plugs;
grommets; mounts; fittings; O-rings; bushings); belonging bags or
sacks, with an outer surface of plastic sheeting; plywood; veneered
panels; laminated wood; paper or paperboard, cut to size or shape;
printed books, brochures, leaflets, or printed matter; twine, starter
rope, safety rope, cordage, ropes, or cables, of synthetic fibers;
gaskets, of carbon fibers; tubes, pipes, or hollow profiles, of
seamless alloy steel; welded circular cross sections of tubes, pipes,
or hollow profiles (of stainless steel; of alloy steel); stainless
steel components (threaded elbows; bends; sleeves; tube or pipe
fittings); iron or steel components (threaded elbows; bends; sleeves;
tube or pipe fittings; stranded wire, ropes, or cables, not
electrically insulated; timing chains or roller chains; coach screws;
self-tapping screws; threaded screws, bolts, nuts, rods, and bushings;
non-threaded washers, spring washers, lock washers, cotters and cotter
pins, pins, rings, and clips; rivets; helical springs; springs or
leaves for springs; washers; clips; fittings; hooks; straps; spacers;
rings; bushings; plates); copper components (tubes or pipes (of refined
copper; of copper alloys); tube or pipe fittings, of copper alloys;
stranded wire or cables; plugs; clips; ends; retainers; bushings;
elbows; covers, plugs, connectors, plates, rings, caps, holders, or
housings for electrical equipment for switching or protecting
electrical circuits boards or panels; winding wire); non-threaded
washers, pins, retaining rings, screws, bolts, or nuts of copper, iron,
or steel with heads of copper; aluminum components (tubes or pipes, of
aluminum alloys; tube or pipe fittings; screws; bolts; nuts; washers;
spacers; bushings; plates; sleeves; clamps; inserts; heads, collars,
nose cones, columns, or covers for electric motors or electric
generating sets and rotary converters); anodes, of zinc; hand-operated
spanners or wrenches (adjustable and non-adjustable); socket wrenches,
drives, or extensions; hand tools; base metal components (padlocks;
locks; mountings; bracket mountings or fixtures); components for marine
engines (powerheads; drives; transoms; valves; inserts; covers;
collars; plates; end caps; hydraulic fluid power pumps; turbo chargers;
water filtering strainers, purifying strainers, or screen struts;
housings; screens; filtering equipment; solenoids; triggers; plugs;
rotors; contact sets; rev limiters; starting equipment; carbon-film
fixed internal resistors; internal resistors); pistons, shift shafts,
shift levers, fuel bowls, throttle controls, levers, covers, retainers,
or shafts for spark-ignition internal combustion piston engines; linear
acting hydraulic power engines and motors; hydraulic power engines and
motors; recoil starters; blocks, link rods, actuators, covers, tubes,
pistons, or scrapers for marine engines and motors; various pumps
(hand; grease; fuel; primer bulb; oil; fuel, lubricating, or cooling
medium for internal combustion piston engines; centrifugal, bilge, or
aerator for liquids; hand- or foot- operated air; air; vacuum);
impellers, inserts, liners, bases, faceplates, shafts, or grommets for
marine engine pumps; shields, manifolds, compressors, adapters, or
restrictors for air or vacuum pumps; heat exchanger units; heat
exchanger assemblies; covers, plates, connections, or housings to
protect sections of a marine engine; filters for internal combustion
engines (oil; fuel; intake air); automatic data processing machines;
shock absorbers, handles, tillers, swivel brackets, or starters to
support the use of marine engines; tie rods; levers; pucks; plates;
pads; links;
[[Page 62790]]
handles of mounts; front or back mounts; various valves (pressure-
reducing; for oleohydraulic or pneumatic transmissions; check
(nonreturn); safety; relief); regulators, throttle bodies, solenoids,
purge vents, valves, floats, nozzles, dampers, covers, joints, or
brackets for pipes and tanks; steel components (ball bearings; tapered
roller bearings; spherical roller bearings; needle roller bearings;
cylindrical roller bearings; needles; rollers); tapered roller
bearings, ball bearing washers, thrust bearings, or bearing spacers, of
steel, aluminum, or plastic; transmission shafts, shift shafts, or
cranks; bearing carriers; housed bearings; bearing housings; gears or
gearing; flywheels; pulleys; clutches; shaft couplings; thrust rings,
drain plugs, flush plugs, control levers, gearcase covers, ideal
exhaust covers, shift arms, shift levers, forward gears, bevel gears,
joints, sprockets for transmission shafts, cranks, flywheels, clutches,
or shaft couplings, of copper, steel, or aluminum; gaskets or joints,
of metal sheeting; propellers, of stainless steel or aluminum; steel or
aluminum components (seals; fittings; thrust washers; hubs; shafts,
covers, armatures, end caps, clamps, pinions, or bushings for
electrical ignition or starting equipment); electric motors and
generators with an output not exceeding 37.5W; DC electric motors and
generators with an output not exceeding 75kW; static converters; spark
plugs; ignition magnetos; magneto-dynamos; magnetic flywheels;
distributors; ignition coils; starter motors or dual purpose starter
generators; generators; alternators; equipment for transmission or
reception of voice, images, or other data for communication in a wire
or wireless network; GPS units; radio navigational aid equipment;
antennas; antenna reflectors; indicator panels with LCDs or LEDs;
horns, buzzer, lamps, and equipment for electric sound or visual
signaling; dielectric electrical capacitors, of plastic or paper;
variable resistors; fuses; motor overload protectors; electrical
circuits protectors; relays, for a voltage not exceeding 60V; relays;
switches to switch or protect electrical circuits; lamp-holders; plugs;
sockets; equipment to switch circuits or circuit protectors; boards,
panels, or consoles for electric control or distribution of
electricity; electrical filament lamps, not ultraviolet or infrared;
diodes, not photosensitive or light-emitting; anode assemblies;
electrical control units or modules; covers, housings, gear shifts,
link rods, handles, joints, bezels, triggers, knobs, barrels, rollers,
racks, throttle levers, plates, carriers, levers, or pivots, of
electrical equipment for marine engines, of base metal or plastic;
ignition wiring sets or wiring sets for ships, vessels, or boats;
wiring assemblies fitted with connectors, not exceeding 1,000V;
electric conductors not fitted with connectors (not exceeding 1,000V;
exceeding 1,000V); electrical insulators; sensors, tri-ducers, live
scopes for ice fishing, GPS, sonar fish finders and underwater
navigational instruments; caps, bezels, port covers, gaskets, or doors
for compasses, navigational instruments and equipment, of plastic or
elastomers; thermometers; pyrometers; dip sticks; various gauges (fuel
level; oil level; oil pressure; water pressure; compression pressure;
trim); water flow detectors; gauges and sensors for measuring or
checking the flow, level, or pressure of liquids or gases; adaptors,
bezels, covers, or shafts, for measuring the flow, level, or pressure
of liquids or gases; speedometers; tachometers; stroboscopes;
mechanical senders, tachometers, bezels, odometers, or speedometers for
revolution counters or production counters; multimeters without a
recording device; voltmeters or battery voltage analyzers; crank
position sensors; laser levels; tip and tell sensors; gauges, sensors,
testers, probes, or indicators measuring or checking marine engine
performance; thermostats; temperature and map sensors for automatic
regulating or controlling the thermostats or locators in marine
engines; housings, covers, and adaptors for thermostats; seats with
wooden frames; and, cushions for boats, of foams, vinyl, and elastomers
(duty rate ranges from duty-free to 12.5%). The request indicates that
certain materials/components are subject to duties under Section 232 of
the Trade Expansion Act of 1962 (Section 232) or Section 301 of the
Trade Act of 1974 (Section 301), depending on the country of origin.
The applicable Section 232 and Section 301 decisions require subject
merchandise to be admitted to FTZs in privileged foreign status (19 CFR
146.41).
Public comment is invited from interested parties. Submissions
shall be addressed to the Board's Executive Secretary and sent to:
[email protected]. The closing period for their receipt is November 28,
2022.
A copy of the notification will be available for public inspection
in the ``Online FTZ Information System'' section of the Board's
website.
For further information, contact Juanita Chen at
[email protected].
Dated: October 11, 2022.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2022-22438 Filed 10-14-22; 8:45 am]
BILLING CODE 3510-DS-P
