Certain New Chemicals; Receipt and Status Information for August 2022, 57891-57897 [2022-20472]
Download as PDF
<![CDATA[
Federal Register / Vol. 87, No. 183 / Thursday, September 22, 2022 / Notices
DEPARTMENT OF ENERGY
Federal Energy Regulatory
Commission
[Docket No. ER22–2858–000]
jspears on DSK121TN23PROD with NOTICES
Supplemental Notice That Initial
Market-Based Rate Filing Includes
Request for Blanket Section 204
Authorization; Ball Hill Wind Energy,
LLC
This is a supplemental notice in the
above-referenced proceeding of Ball Hill
Wind Energy, LLC’s application for
market-based rate authority, with an
accompanying rate tariff, noting that
such application includes a request for
blanket authorization, under 18 CFR
part 34, of future issuances of securities
and assumptions of liability.
Any person desiring to intervene or to
protest should file with the Federal
Energy Regulatory Commission, 888
First Street NE, Washington, DC 20426,
in accordance with Rules 211 and 214
of the Commission’s Rules of Practice
and Procedure (18 CFR 385.211 and
385.214). Anyone filing a motion to
intervene or protest must serve a copy
of that document on the Applicant.
Notice is hereby given that the
deadline for filing protests with regard
to the applicant’s request for blanket
authorization, under 18 CFR part 34, of
future issuances of securities and
assumptions of liability, is October 6,
2022.
The Commission encourages
electronic submission of protests and
interventions in lieu of paper, using the
FERC Online links at https://
www.ferc.gov. To facilitate electronic
service, persons with internet access
who will eFile a document and/or be
listed as a contact for an intervenor
must create and validate an
eRegistration account using the
eRegistration link. Select the eFiling
link to log on and submit the
intervention or protests.
Persons unable to file electronically
may mail similar pleadings to the
Federal Energy Regulatory Commission,
888 First Street NE, Washington, DC
20426. Hand delivered submissions in
docketed proceedings should be
delivered to Health and Human
Services, 12225 Wilkins Avenue,
Rockville, Maryland 20852.
In addition to publishing the full text
of this document in the Federal
Register, the Commission provides all
interested persons an opportunity to
view and/or print the contents of this
document via the internet through the
Commission’s Home Page (https://
www.ferc.gov) using the ‘‘eLibrary’’ link.
Enter the docket number excluding the
VerDate Sep<11>2014
17:32 Sep 21, 2022
Jkt 256001
last three digits in the docket number
field to access the document. At this
time, the Commission has suspended
access to the Commission’s Public
Reference Room, due to the
proclamation declaring a National
Emergency concerning the Novel
Coronavirus Disease (COVID–19), issued
by the President on March 13, 2020. For
assistance, contact the Federal Energy
Regulatory Commission at
FERCOnlineSupport@ferc.gov or call
toll-free, (886) 208–3676 or TYY, (202)
502–8659.
Dated: September 16, 2022.
Debbie-Anne A. Reese,
Deputy Secretary.
[FR Doc. 2022–20526 Filed 9–21–22; 8:45 am]
BILLING CODE 6717–01–P
DEPARTMENT OF ENERGY
Federal Energy Regulatory
Commission
Combined Notice of Filings
Take notice that the Commission has
received the following Natural Gas
Pipeline Rate and Refund Report filings:
Filings in Existing Proceedings
Docket Numbers: RP22–1180–001.
Applicants: Colorado Interstate Gas
Company, L.L.C.
Description: Tariff Amendment:
Amendment to Fuel_Lost Unaccounted
For Update to be effective 10/1/2022.
Filed Date: 9/16/22.
Accession Number: 20220916–5004.
Comment Date: 5 p.m. ET 9/23/22.
Any person desiring to protest in any
the above proceedings must file in
accordance with Rule 211 of the
Commission’s Regulations (18 CFR
385.211) on or before 5:00 p.m. Eastern
time on the specified comment date.
Filings Instituting Proceedings
Docket Numbers: RP22–1215–000.
Applicants: Enable Gas Transmission,
LLC.
Description: § 4(d) Rate Filing: Filed
Agreements Housekeeping to be
effective 9/15/2022.
Filed Date: 9/15/22.
Accession Number: 20220915–5154.
Comment Date: 5 p.m. ET 9/27/22.
Docket Numbers: RP22–1216–000.
Applicants: Equitrans, L.P.
Description: § 4(d) Rate Filing: FOSA
Updates to be effective 11/1/2022.
Filed Date: 9/15/22.
Accession Number: 20220915–5194.
Comment Date: 5 p.m. ET 9/27/22.
Docket Numbers: RP22–1217–000.
Applicants: Natural Gas Pipeline
Company of America LLC.
PO 00000
Frm 00028
Fmt 4703
Sfmt 4703
57891
Description: § 4(d) Rate Filing: NonConforming Negotiated Rate Agreement
Filing-Kiowa Power Partners, LLC to be
effective 10/18/2022.
Filed Date: 9/16/22.
Accession Number: 20220916–5058.
Comment Date: 5 p.m. ET 9/28/22.
Docket Numbers: RP22–1218–000.
Applicants: Sea Robin Pipeline
Company, LLC.
Description: § 4(d) Rate Filing:
Reservation Charge Credit and other
Revisions to be effective 10/16/2022.
Filed Date: 9/16/22.
Accession Number: 20220916–5064.
Comment Date: 5 p.m. ET 9/28/22.
Any person desiring to intervene or
protest in any of the above proceedings
must file in accordance with Rules 211
and 214 of the Commission’s
Regulations (18 CFR 385.211 and
385.214) on or before 5:00 p.m. Eastern
time on the specified comment date.
Protests may be considered, but
intervention is necessary to become a
party to the proceeding.
The filings are accessible in the
Commission’s eLibrary system (https://
elibrary.ferc.gov/idmws/search/
fercgensearch.asp) by querying the
docket number.
eFiling is encouraged. More detailed
information relating to filing
requirements, interventions, protests,
service, and qualifying facilities filings
can be found at: https://www.ferc.gov/
docs-filing/efiling/filing-req.pdf. For
other information, call (866) 208–3676
(toll free). For TTY, call (202) 502–8659.
Dated: September 16, 2022.
Debbie-Anne A. Reese,
Deputy Secretary.
[FR Doc. 2022–20530 Filed 9–21–22; 8:45 am]
BILLING CODE 6717–01–P
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OPPT–2022–0132; FRL–9411–08]
Certain New Chemicals; Receipt and
Status Information for August 2022
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
EPA is required under the
Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg
Chemical Safety for the 21st Century
Act, to make information publicly
available and to publish information in
the Federal Register pertaining to
submissions under TSCA section 5,
including notice of receipt of a
Premanufacture notice (PMN),
SUMMARY:
E:\FR\FM\22SEN1.SGM
22SEN1
57892
Federal Register / Vol. 87, No. 183 / Thursday, September 22, 2022 / Notices
Significant New Use Notice (SNUN) or
Microbial Commercial Activity Notice
(MCAN), including an amended notice
or test information; an exemption
application (Biotech exemption); an
application for a test marketing
exemption (TME), both pending and/or
concluded; a notice of commencement
(NOC) of manufacture (including
import) for new chemical substances;
and a periodic status report on new
chemical substances that are currently
under EPA review or have recently
concluded review. This document
covers the period from 08/01/2022 to
08/31/2022.
DATES: Comments identified by the
specific case number provided in this
document must be received on or before
October 24, 2022.
ADDRESSES: Submit your comments,
identified by docket identification (ID)
number EPA–HQ–OPPT–2022–0132,
through the Federal eRulemaking Portal
at https://www.regulations.gov. Follow
the online instructions for submitting
comments. Do not submit electronically
any information you consider to be
Confidential Business Information (CBI)
or other information whose disclosure is
restricted by statute. Additional
instructions on commenting and visiting
the docket, along with more information
about dockets generally, is available at
https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim
Rahai, Project Management and
Operations Division (MC 7407M), Office
of Pollution Prevention and Toxics,
Environmental Protection Agency, 1200
Pennsylvania Ave. NW, Washington, DC
20460–0001; telephone number: (202)
564–8593; email address: rahai.jim@
epa.gov.
For general information contact: The
TSCA-Hotline, ABVI-Goodwill, 422
South Clinton Ave., Rochester, NY
14620; telephone number: (202) 554–
1404; email address: TSCA-Hotline@
epa.gov.
SUPPLEMENTARY INFORMATION:
I. Executive Summary
jspears on DSK121TN23PROD with NOTICES
A. What action is the Agency taking?
This document provides the receipt
and status reports for the period from
08/01/2022 to 08/31/2022. The Agency
is providing notice of receipt of PMNs,
SNUNs, and MCANs (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (Biotech exemption); TMEs,
both pending and/or concluded; NOCs
to manufacture a new chemical
substance; and a periodic status report
on new chemical substances that are
VerDate Sep<11>2014
17:32 Sep 21, 2022
Jkt 256001
currently under EPA review or have
recently concluded review.
EPA is also providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
B. What is the Agency’s authority for
taking this action?
Under the Toxic Substances Control
Act (TSCA), 15 U.S.C. 2601 et seq., a
chemical substance may be either an
‘‘existing’’ chemical substance or a
‘‘new’’ chemical substance. Any
chemical substance that is not on EPA’s
TSCA Inventory of Chemical Substances
(TSCA Inventory) is classified as a ‘‘new
chemical substance,’’ while a chemical
substance that is listed on the TSCA
Inventory is classified as an ‘‘existing
chemical substance.’’ (See TSCA section
3(11).) For more information about the
TSCA Inventory please go to: https://
www.epa.gov/tsca-inventory.
Any person who intends to
manufacture (including import) a new
chemical substance for a non-exempt
commercial purpose, or to manufacture
or process a chemical substance in a
non-exempt manner for a use that EPA
has determined is a significant new use,
is required by TSCA section 5 to
provide EPA with a PMN, MCAN, or
SNUN, as appropriate, before initiating
the activity. EPA will review the notice,
make a risk determination on the
chemical substance or significant new
use, and take appropriate action as
described in TSCA section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA
to allow persons, upon application and
under appropriate restrictions, to
manufacture or process a new chemical
substance, or a chemical substance
subject to a significant new use rule
(SNUR) issued under TSCA section
5(a)(2), for ‘‘test marketing’’ purposes,
upon a showing that the manufacture,
processing, distribution in commerce,
use, and disposal of the chemical will
not present an unreasonable risk of
injury to health or the environment.
This is referred to as a test marketing
exemption, or TME. For more
information about the requirements
applicable to a new chemical go to:
https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and
EPA regulations, EPA is required to
PO 00000
Frm 00029
Fmt 4703
Sfmt 4703
publish in the Federal Register certain
information, including notice of receipt
of a PMN/SNUN/MCAN (including
amended notices and test information);
an exemption application under 40 CFR
part 725 (biotech exemption); an
application for a TME, both pending
and concluded; NOCs to manufacture a
new chemical substance; and a periodic
status report on the new chemical
substances that are currently under EPA
review or have recently concluded
review.
C. Does this action apply to me?
This action provides information that
is directed to the public in general.
D. Does this action have any
incremental economic impacts or
paperwork burdens?
No.
E. What should I consider as I prepare
my comments for EPA?
1. Submitting confidential business
information (CBI). Do not submit this
information to EPA through
regulations.gov or email. Clearly mark
the part or all of the information that
you claim to be CBI. For CBI
information in a disk or CD–ROM that
you mail to EPA, mark the outside of the
disk or CD–ROM as CBI and then
identify electronically within the disk or
CD–ROM the specific information that
is claimed as CBI. In addition to one
complete version of the comment that
includes information claimed as CBI, a
copy of the comment that does not
contain the information claimed as CBI
must be submitted for inclusion in the
public docket. Information so marked
will not be disclosed except in
accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments.
When preparing and submitting your
comments, see the commenting tips at
https://www.epa.gov/dockets/
comments.html.
II. Status Reports
In the past, EPA has published
individual notices reflecting the status
of TSCA section 5 filings received,
pending or concluded. In 1995, the
Agency modified its approach and
streamlined the information published
in the Federal Register after providing
notice of such changes to the public and
an opportunity to comment (See the
Federal Register of May 12, 1995, (60
FR 25798) (FRL–4942–7). Since the
passage of the Lautenberg amendments
to TSCA in 2016, public interest in
information on the status of section 5
cases under EPA review and, in
particular, the final determination of
E:\FR\FM\22SEN1.SGM
22SEN1
57893
Federal Register / Vol. 87, No. 183 / Thursday, September 22, 2022 / Notices
such cases, has increased. In an effort to
be responsive to the regulated
community, the users of this
information, and the general public, to
comply with the requirements of TSCA,
to conserve EPA resources and to
streamline the process and make it more
timely, EPA is providing information on
its website about cases reviewed under
the amended TSCA, including the
section 5 PMN/SNUN/MCAN and
exemption notices received, the date of
receipt, the final EPA determination on
the notice, and the effective date of
EPA’s determination for PMN/SNUN/
MCAN notices on its website at: https://
www.epa.gov/reviewing-new-chemicalsunder-toxic-substances-control-act-tsca/
status-pre-manufacture-notices. This
information is updated on a weekly
basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that
have passed an initial screening by EPA
during this period, Table I provides the
following information (to the extent that
such information is not subject to a CBI
claim) on the notices screened by EPA
during this period: The EPA case
number assigned to the notice that
indicates whether the submission is an
initial submission, or an amendment, a
notation of which version was received,
the date the notice was received by EPA,
the submitting manufacturer (i.e.,
domestic producer or importer), the
potential uses identified by the
manufacturer in the notice, and the
chemical substance identity.
As used in each of the tables in this
unit, (S) indicates that the information
in the table is the specific information
provided by the submitter, and (G)
indicates that this information in the
table is generic information because the
specific information provided by the
submitter was claimed as CBI.
Submissions which are initial
submissions will not have a letter
following the case number. Submissions
which are amendments to previous
submissions will have a case number
followed by the letter ‘‘A’’ (e.g., P–18–
1234A). The version column designates
submissions in sequence as ‘‘1’’, ‘‘2’’,
‘‘3’’, etc. Note that in some cases, an
initial submission is not numbered as
version 1; this is because earlier
version(s) were rejected as incomplete
or invalid submissions. Note also that
future versions of the following tables
may adjust slightly as the Agency works
to automate population of the data in
the tables.
TABLE I—PMN/SNUN/MCANS APPROVED* FROM 08/01/2022 TO 08/31/2022
Case No.
Version
jspears on DSK121TN23PROD with NOTICES
J–22–0017 .........
Received
date
Manufacturer
Use
Chemical substance
1
08/09/2022
CBI ..................................
(G) Production of an enzyme ..............
J–22–0017A .......
2
08/22/2022
CBI ..................................
(G) Production of an enzyme ..............
J–22–0018 .........
1
08/09/2022
CBI ..................................
(G) Production of an enzyme ..............
J–22–0018A .......
2
08/22/2022
CBI ..................................
(G) Production of an enzyme ..............
P–18–0057A ......
16
08/01/2022
CBI ..................................
P–18–0162A ......
6
07/27/2022
CBI ..................................
(S) A drier accelerator that is used for
superior drying performance in solvent-borne and waterborne air dried
paints, inks and coatings.
(G) Adhesive component .....................
P–21–0016A ......
3
08/08/2022
CBI ..................................
P–21–0138A ......
4
08/04/2022
P–22–0017A ......
3
08/03/2022
P–22–0017A ......
4
08/11/2022
P–22–0028A ......
4
08/12/2022
LG Energy Solution
Michigan, Inc.
Sasol Chemicals (USA),
LLC.
Sasol Chemicals (USA),
LLC.
H.B. Fuller Company ......
P–22–0029A ......
4
08/12/2022
H.B. Fuller Company ......
(S) Industrial Adhesive ........................
P–22–0030A ......
4
08/12/2022
H.B. Fuller Company ......
(S) Industrial Adhesive ........................
P–22–0031A ......
4
08/12/2022
H.B. Fuller Company ......
(S) Industrial Adhesive ........................
P–22–0053 ........
3
08/02/2022
CBI ..................................
P–22–0058 ........
2
08/15/2022
Solvay Fluorides, LLC .....
(G) Additive in agricultural formulations.
(G) Process chemical ..........................
P–22–0058A ......
3
08/19/2022
Solvay Fluorides, LLC .....
(G) Process chemical ..........................
VerDate Sep<11>2014
17:32 Sep 21, 2022
Jkt 256001
PO 00000
Frm 00030
(G) Paint additive, Additive in coating
formulations, Component in cleaning
agents.
(S) Electrode material for use in the
manufacture of batteries.
(S) Alkylate for polymer esters ............
(G) Microorganisms transformed
zyme.
(G) Microorganisms transformed
zyme.
(G) Microorganisms transformed
zyme.
(G) Microorganisms transformed
zyme.
(G) Vanadium Carboxylate.
to express an ento express an ento express an ento express an en-
(G) Cashew nutshell liquid, polymer with
diisocyanatoalkane, substituted-polyoxyalkyldiol
and polyether polyol.
(G) Alkanoic acid, dialkyl ester.
(G) Lithium metal oxide.
(S) 1-Eicosanol, manuf. of, distn., residues.
(S) Alkylate for polymer esters ............
(S) 1-Eicosanol, manuf. of, distn., residues.
(S) Industrial Adhesive ........................
(G) Polyester with 1,4-benzenedicarboxylic acid,
1,4-dimethyl 1,4-benzebedicarboxylate, 2,2-dimethyl-1,3-propanediol, dodecanedioic acid, 1,2ethanediol, aliphatic polyester, 3-hydroxy-2,2dimethylpropyl 3-hydroxy-2,2dimethylpropanoate, 1,3-isobenzofurandione and
1,1′-methylenebis[4-isocyanatobenzene].
(G) Polyester with 1,4-benzenedicarboxylic acid,
1,4-dimethyl 1,4-benzebedicarboxylate, 2,2-dimethyl-1,3-propanediol, dodecanedioic acid, 1,2ethanediol, aliphatic polyester, 3-hydroxy-2,2dimethylpropyl 3-hydroxy-2,2dimethylpropanoate, 1,3-isobenzofurandione and
1,1′-methylenebis[isocyanatobenzene].
(G) Polyester with 1,4-benzenedicarboxylic acid,
2,2-dimethyl-1,3-propanediol, dodecanedioic
acid, 1,2-ethanediol, aliphatic polyester, 3-hydroxy-2,2-dimethylpropyl 3-hydroxy-2,2dimethylpropanoate, 1,3-isobenzofurandione and
1,1′-methylenebis[4-isocyanatobenzene].
(G) Polyester with 1,4-benzenedicarboxylic acid,
2,2-dimethyl-1,3-propanediol, dodecanedioic
acid, 1,2-ethanediol, aliphatic polyester, 3-hydroxy-2,2-dimethylpropyl 3-hydroxy-2,2dimethylpropanoate, 1,3-isobenzofurandione and
1,1′-methylenebis[isocyanatobenzene].
(S) Ethanol, 2-amino-, compds. with polyethylene
glycol hydrogen sulfate C10-16-alkyl ether.
(S) Methanesulfonamide,1,1,1-trifluoro-N[(trifluoromethyl)sulfonyl]-, sodium salt (1:1).
(S) Methanesulfonamide,1,1,1-trifluoro-N[(trifluoromethyl)sulfonyl]-, sodium salt (1:1).
Fmt 4703
Sfmt 4703
E:\FR\FM\22SEN1.SGM
22SEN1
57894
Federal Register / Vol. 87, No. 183 / Thursday, September 22, 2022 / Notices
TABLE I—PMN/SNUN/MCANS APPROVED* FROM 08/01/2022 TO 08/31/2022—Continued
jspears on DSK121TN23PROD with NOTICES
Case No.
Version
Received
date
Manufacturer
Use
Chemical substance
P–22–0093 ........
2
07/28/2022
CBI ..................................
(G) Additive used for pigment stabilization.
P–22–0121A ......
2
07/28/2022
CBI ..................................
P–22–0130A ......
3
08/19/2022
Integrity Bio-chemical,
LLC.
P–22–0131A ......
3
08/19/2022
Integrity Bio-chemical,
LLC.
P–22–0132A ......
3
08/19/2022
Integrity Bio-chemical,
LLC.
P–22–0133A ......
3
08/19/2022
Integrity Bio-chemical,
LLC.
P–22–0134A ......
3
08/19/2022
Integrity Bio-chemical,
LLC.
P–22–0135A ......
3
08/19/2022
Integrity Bio-chemical,
LLC.
P–22–0139 ........
P–22–0144A ......
3
2
08/11/2022
07/27/2022
P–22–0147A ......
3
08/18/2022
CBI ..................................
United Color Manufacturing.
VP Racing Fuels, Inc ......
(G) Process Intermediate: New chemical substance will be used as a
process intermediate.
(S) Surfactant—surface tension reducing agent for use in production enhancement in oil wells (industrial);
Emulsifier, surface reduction household and industrial detergents; wetting agent personal care; wetting
agent- agriculture; surfactants—as
raw materials for use in the manufacture of industrial products and
consumer and household products.
(S) Surfactant—surface tension reducing agent for use in production enhancement in oil wells (industrial);
Emulsifier, Surface reduction household and industrial detergents;
Emulsifier, Wetting agent Personal
care; Wetting agent—Agriculture;
Surfactants—as raw materials for
use in the manufacture of industrial
products and consumer and household products.
(S) Surfactant—surface tension reducing agent for use in production enhancement in oil wells (industrial);
Emulsifier, Surface reduction
Household and industrial detergents; Emulsifier, Wetting agent
Personal care; Wetting agent—Agriculture; Surfactants—as raw materials for use in the manufacture of
industrial products and consumer
and household products.
(S) Surfactant—surface tension reducing agent for use in production enhancement in oil wells (industrial);
Emulsifier, Surface reduction formulation of household and industrial
detergents; Emulsifier, Wetting
agent Personal care; Wetting
agent—Agriculture; Surfactants—as
raw materials for use in the manufacture of personal care and household care products (e.g., cleaners).
(S) Surfactants—as raw materials for
use in the manufacture of personal
care and household care products
(e.g., cleaners); Wetting agent—Agriculture, Surfactant—surface tension reducing agent for use in production enhancement in oil wells (industrial); Emulsifier, Surface reduction formulation of household and
industrial detergents; Emulsifier,
Wetting agent Personal care.
(S) Emulsifier, Wetting agent Personal
care; Emulsifier, Surface reduction
formulation of household and industrial detergents; Wetting agent—Agriculture; Surfactants—as raw materials for use in the manufacture of
personal care and household care
products (e.g., cleaners); Surfactant—surface tension reducing
agent for use in production enhancement in oil wells (industrial).
(G) Antioxidant/Process Stabilizer .......
(G) Intermediate ...................................
P–22–0149 ........
3
08/08/2022
Colonial Chemical, Inc ....
P–22–0152 ........
1
07/26/2022
CBI ..................................
VerDate Sep<11>2014
17:32 Sep 21, 2022
Jkt 256001
PO 00000
Frm 00031
(S) Feedstock for Gasoline to include
Racing Fuels.
(S) All purpose hard surface cleaner;
Low foam floor scrubber; Spray
Metal Cleaning Concentrate.
(G) Photolithography ............................
Fmt 4703
Sfmt 4703
(G) Alkenoic acid, alkyl-substituted alkyl ester, polymer with (polyalkylamino)alkyl alkylalkenoate,
alkyl-substituted alkylalkenoate, alpha-(alkyl-oxoalkenyl)-omega-alkoxypoly(oxy-1,2-ethanediyl),
[(alkoxy-alkyl-alkenyl)oxy]polyalkylsilane-initiated,
compds. with polyethylene glycol phosphoric acid
based alkyl ether.
(G) polychloroalkene.
(S) Maltodextrin, octanoate.
(S) Maltodextrin, hexadecanoate.
(S) Maltodextrin, decanoate.
(S) Maltodextrin, octadecanoate.
(S) Maltodextrin, dodecanoate.
(S) Maltodextrin, tetradecanoate.
(G) dialkylhydroxylamine.
(G) Alkylated PhenylNaphthylamine.
(S) Hydrocarbons, C5-10.
(S) Hexanoic acid, 3,5,5-trimethyl-, sodium salt
(1:1).
(G) Sulfonium, tricabocyclic-, 2-heteroatom-substituted-4-alkylcarbomonocyclecarboxylate (1:1).
E:\FR\FM\22SEN1.SGM
22SEN1
Federal Register / Vol. 87, No. 183 / Thursday, September 22, 2022 / Notices
57895
TABLE I—PMN/SNUN/MCANS APPROVED* FROM 08/01/2022 TO 08/31/2022—Continued
Case No.
Version
Manufacturer
Use
Chemical substance
P–22–0153 ........
2
08/18/2022
Huntsman International,
LLC.
P–22–0154 ........
1
07/26/2022
P–22–0155 ........
1
08/01/2022
Givaudan Fragrances
Corp.
CBI ..................................
P–22–0156 ........
1
08/08/2022
CBI ..................................
(S) Notified substance will be used as
an adhesion promoter in a resin
used for adhesive and/or sealants in
industrial assembly or manufacturing operations. Through small
scale application on assembly line,
manual use, or automated use by
dispensing unit; Notified substance
will be used as an adhesion promoter in a resin used for adhesive
and/or sealants in outdoor repair operations by professional workers.
Application of adhesives and primers outdoors. Small scale application of adhesives, sealants or primers. Small scale application of reactive adhesives and sealants. Application of reactive sealants.
(G) Fragrance ingredient for use in
laundry applications.
(G) Physical property modifier for
polyurethanes; Modifier for polyurethane blends.
(G) Epoxy additive ...............................
P–22–0157 ........
1
08/10/2022
Evonik Corporation .........
(S) Polyurethane catalyst ....................
P–22–0158 ........
1
08/11/2022
Aqdot ...............................
(G) Additive used in consumer, commercial, and industrial applications.
P–22–0159 ........
1
08/12/2022
CBI ..................................
(G) Additive ..........................................
Case No.
jspears on DSK121TN23PROD with NOTICES
Received
date
Version
Received
date
(S) 2-Propenoic acid, 2-methyl-, 2-hydroxyethyl
ester, reaction products with 2-oxepanone
homopolymer 2-[(2-methyl-1-oxo-2-propen-1-yl)
oxy]ethyl] ester and phosphorous oxide (P2O5).
(G) Acetyl, alkyl, alkenoic acid, ethyl ester.
(G) 2-alkyl-1,2-heteropolycycle-3-one.
(G) Alkyl substituted carbopolycyclic acids,
fumarated, and heteromonocyclic esters.
(S) 1,2-Ethanediamine, N1,N2-dimethyl-N1-(1methylethyl)-N2-[2-[methyl(1methylethyl)amino]ethyl]-.
(S) 1H,4H,14H,17H-2,16:3,15-Dimethano5H,6H,7H,8H,9H,10H,11H,
12H,13H,18H,19H,20H,21H,
22H,23H,24H,25H,26H-2,3,4a,5a,6a,7a,8a,
9a,10a,11a,12a,13a,15,16,17a,18a,19a,20a,
21a,22a,23a,24a,25a,26a-tetracosaaza
bispentaleno[1″′,6″′:5″,6″,7″]cycloocta[1″,2″,3″:3′,
4′]pentaleno[1′,6′:5,6,7]cycloocta[1,2,3-gh:1′,2′,3′g′h′]cycloocta[1,2,3-cd:5,6,7-c′d′]dipentalene1,4,6,8,10,12,14,17,19,21,23,25-dodecone,
dodecahydro-, stereoisomer;(S) 2,18:3,17Dimethano-2,3,4a,5a,6a,7a,8a,9a,10a,
11a,12a,13a,14a,15a,
17,18,19a,20a,21a,22a,23a,24a,25a,26a,
27a,28a,29a,30aoctacosaazabispentaleno[1″″
′,6″″″′:5″″,6″″,7″″]cycloocta[1″″,2″″,3″″:3″′,4″′]
pentaleno[1″′,6″′:5″,6″,7″]cycloocta
[1″,2″,3″:3′,4′]pentaleno[1′,6′:5,6,7]cycloocta
[1,2,3-cd:1′,2′,3′-gh]pentalene-1,4,6,8,10,12,14,
16,19,21,23,25,27,29-tetradecone,
tetradecahydro-, stereoisomer;(S) 2,20:3,19Dimethano-2,3,4a,5a,6a,
7a,8a,9a,10a,11a,12a,13a,14a,
15a,16a,17a,19,20,21a,22a,23a,24a,25a,
26a,27a,28a,29a,30a,31a,32a,33a,34adotriacon
taazabispentaleno[1″″′,6″″′:5″″,6″″,7″″]cycloocta
[1″″,2″″,3″″:3″′,4″′]pentaleno[1″′,6″′:5″,6″,7″]
cycloocta[1″,2″,3″:3′,4′]pentaleno[1′,6′:5,6,7]
cycloocta[1,2,3-gh:1′,2′,3′-g′h′]cycloocta[1,2,3-cd:
5,6,7-c′d′]dipentalene-1,4,6,8,10,12,14,
16,18,21,23,25,27,29,31,33-hexadecone,
hexadecahydro-, stereoisomer.
(G) Poly[oxy(methyl-1,2-ethanediyl)], alpha-hydroomega-hydroxy-, polymer with 1,3diisocyanatomethylbenzene, alkoxyl methacrylate-blocked.
Manufacturer
Use
Chemical substance
(S) 1lambda5-2,1-Benzoxaphosphol3(1H)-one, 1,1-dicyclohexyl-.
(G) Sulfonium, tricarbocyclic-, salt with
[polyhydro-2-alkyl-5-(polyhalo-2heteroalkyl)-alkano-1,3-hetropolycyclic]alkyl polyhaloaryl ester (1:1).
(G) Haloalkylfurancarboxaldehyde.
P–22–0160 ........
1
08/12/2022
Cytec Industries, Inc .......
(G) Industrial process chemical ................................
P–22–0161 ........
1
08/12/2022
CBI ..................................
(G) Photolithography ................................................
P–22–0162 ........
3
08/15/2022
CBI ..................................
P–22–0167 ........
1
08/26/2022
CBI ..................................
(S) Intermediate used in the production of para-xylene (pX),(S) Flexible intermediate used in the
production of FDCA/PET and other specialty
chemicals.
(G) Photolithography ................................................
VerDate Sep<11>2014
17:32 Sep 21, 2022
Jkt 256001
PO 00000
Frm 00032
Fmt 4703
Sfmt 4703
E:\FR\FM\22SEN1.SGM
(G) 1,2-Cycloalkanedicarboxylic acid,
1,2-bis(2-oxiranylalkyl) ester, reaction products with unsaturated carboxylic acid.
22SEN1
57896
Federal Register / Vol. 87, No. 183 / Thursday, September 22, 2022 / Notices
TABLE I—PMN/SNUN/MCANS APPROVED* FROM 08/01/2022 TO 08/31/2022—CONTINUED
Case No.
Version
Received
date
Manufacturer
Use
(S) Solvent-borne coatings; Dispersions for industrial coatings (e.g.,
polyurethane, acrylic, epoxy); Current, Approved Use: Paint removers;
Current, Approved Use: Solvent for
formulation of active ingredients for
agriculture-end use pesticide product; Current, Approved Use: Solvent
for production and formulation of active ingredients for agriculture; Current, Approved Use: Solvents for
production and formulation of fertilizer; Current, Approved Use: Paint
stripper only for industrial use; Current, Approved Use: Petrochemical
extraction processes; Current, Approved Use: Wax inhibitors (in hydrocarbon lines); Current, Approved
Use: Solvent for cleaning industrial
reactors; Current, Approved Use: Industrial cleaner (e.g., cleaner for
wind turbine, oil rigs, large engines);
Current, Approved Use: Formulation
of inks; Current, Approved Use:
Coatings for microelectronics (e.g.,
casting of polymer films) in clean
rooms; Current, Approved Use: Solvent for chemical synthesis reactions; Current, Approved Use: Reaction medium for polymerization,
polymer coatings for industrial and
professional applications (e.g., wire
enamel, non-stick and friction reduction coating) membranes; Current,
Approved Use: Photoresist stripping
in microelectronics in clean rooms;
Current, Approved Use: Silicon
wafer cleaning in microelectronics in
clean rooms; Current, Approved
Use: Solvent-borne industrial coatings; Current, Approved Use: Adhesives and sealants; Current, Approved Use: Coating for consumer
and professional use; (G) Industrial
Cleaner; Solvent for article production; Reprocessing; Reaction medium for polymerization, polymer
coatings for industrial and professional applications; Coatings for
commercial use, spray coating;
Consumer use other than brush on;
Coatings for consumer use, brush
on coatings.
(G) Product of Pyrolysis manufacturing
(S) 2-Pyrrolidinone, 1-butyl-.
(G) Product of Pyrolysis Manufacturing
(S) Waste plastics, pyrolyzed, C20-55 fraction.
SN–22–0002A ...
3
08/26/2022
Eastman Chemical Company, Inc.
SN–22–0007A ...
3
08/16/2022
SN–22–0008A ...
3
08/16/2022
SN–22–0009A ...
3
08/16/2022
SN–22–0010A ...
2
08/05/2022
Braven Environmental,
LLC.
Braven Environmental,
LLC.
Braven Environmental,
LLC.
CBI ..................................
Chemical substance
(S) Waste plastics, pyrolyzed, C5-12 fraction.
(G) Product of Pyrolysis Manufacturing
(S) Waste plastics, pyrolyzed, C9-20 fraction.
(S) Monomer chemical, reactive diluent in UV coating formulations (this
is new use); Reactive diluent for 3D
printing formulations (existing use,
approved by PMN P18–0392); Monomer or reactive diluent in UV-inkjet
and screen printing ink formulations
(existing use, approved by PMN P–
18–0392); Reactive diluent, additive
in UV adhesive formulations (this is
new use).
(S) 2-Oxazolidinone, 3-ethenyl-5-methyl-.
jspears on DSK121TN23PROD with NOTICES
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided with the
submission prior to the start of the 90 day review period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides
the following information (to the extent
that such information is not claimed as
CBI) on the NOCs that have passed an
initial screening by EPA during this
period: The EPA case number assigned
VerDate Sep<11>2014
17:32 Sep 21, 2022
Jkt 256001
to the NOC including whether the
submission was an initial or amended
submission, the date the NOC was
received by EPA, the date of
commencement provided by the
submitter in the NOC, a notation of the
PO 00000
Frm 00033
Fmt 4703
Sfmt 4703
type of amendment (e.g., amendment to
generic name, specific name, technical
contact information, etc.) and chemical
substance identity.
E:\FR\FM\22SEN1.SGM
22SEN1
Federal Register / Vol. 87, No. 183 / Thursday, September 22, 2022 / Notices
57897
TABLE II—NOCS APPROVED * FROM 08/01/2022 TO 08/31/2022
Received date
Commencement
date
If amendment, type of amendment
J–22–0011 ......
07/27/2022
07/25/2022
N .....................................................
P–11–0242A ...
08/02/2022
07/09/2021
P–15–0734 .....
08/11/2022
08/02/2022
Revised generic name and added
manufacturing/import site.
N .....................................................
P–18–0289A ...
P–18–0290A ...
P–19–0046 .....
08/17/2022
08/17/2022
08/24/2022
06/22/2022
06/22/2022
05/03/2019
Revised generic name ...................
Revised generic name ...................
N .....................................................
P–19–0143 .....
08/07/2022
07/21/2022
N .....................................................
P–19–0144 .....
08/07/2022
07/21/2022
N .....................................................
P–20–0127 .....
P–21–0196 .....
P–21–0197 .....
08/29/2022
08/17/2022
08/17/2022
08/23/2022
07/20/2022
07/20/2022
N .....................................................
N .....................................................
N .....................................................
Case No.
Chemical substance
(G) Biofuel producing saccharomyces cerevisiae
modified, genetically stable.
(G) Bicycloolefinic hydroxyester.
(G) Acrylate, polymer with substituted
ethyleneamine.
(G) 2-(2(phenylmethylene)amino)ethoxy)-alcohol.
(G) Phenyl-oxazolidine.
(S) 1,2,4-benzenetricarboxylic acid, mixed decyl and
octyl triesters.
(G) Aldehyde, polymer with mixed
alkanepolyamines, 2,2-[1,4-alkanediylbis
(oxyalkylene)] bis[oxirane], 2-(alkoxyalkyloxirane,
4,4-(1-alkylidene)bis[phenol], 2,2-[(1-alkylidene)bis
(4,1-alkyleneoxyalkylene)]bis[oxirane] and 2(aryloxyalkyl)oxirane, acetate (salt).
(G) Alkanedioic acid, compds. with substituted
arylalkylamine-arylalcohol disubstituted alkane—
the diglycidyl ether of a arylalcohol disubstituted
alkane-epichlorohydrin-aldehyde-2,2-[(1alkylidene)bis[4,1-aryleneoxy(alkyl-2,1-alkanediyl)
oxyalkylene]]bis[oxirane]-alkanepolyamine polymer-1-[[2-[(2-aminoalkyl)amino]alkyl]amino]-3aryloxy-2-alcohol reaction products.
(S) 2h-pyran, tetrahydro-4-methyl-.
(S) 5h-1,2-oxathiole, 2,2-dioxide.
(G) Imidazole-carboxylic acid, substituted.
* The term ‘Approved’ indicates that a submission has passed a quick initial screen ensuring all required information and documents have been
provided with the submission.
In Table III of this unit, EPA provides
the following information (to the extent
such information is not subject to a CBI
claim) on the test information that has
been received during this time period:
The EPA case number assigned to the
test information; the date the test
information was received by EPA, the
type of test information submitted, and
chemical substance identity.
TABLE III—TEST INFORMATION RECEIVED FROM 08/01/2022 TO 08/31/2022
Case No.
Received date
Type of test information
Chemical substance
P–15–0443 .....................................
08/10/2022 ....................................
P–16–0543 .....................................
08/03/2022 ....................................
90-Day Inhalation Toxicity Testing
(OECD Test Guideline 413).
Industrial Hygiene Exposure Report.
(G) Rare earth doped zirconium
oxide.
(G) Halogenophosphoric acid
metal salt.
jspears on DSK121TN23PROD with NOTICES
If you are interested in information
that is not included in these tables, you
may contact EPA’s technical
information contact or general
information contact as described under
FOR FURTHER INFORMATION CONTACT to
access additional non-CBI information
that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: September 15, 2022.
Pamela Myrick,
Director, Project Management and Operations
Division, Office of Pollution Prevention and
Toxics.
[FR Doc. 2022–20472 Filed 9–21–22; 8:45 am]
BILLING CODE 6560–50–P
VerDate Sep<11>2014
17:32 Sep 21, 2022
Jkt 256001
ENVIRONMENTAL PROTECTION
AGENCY
[EPA–HQ–OAR–2022–0070; FRL–10230–01–
OMS]
Information Collection Request
Submitted to OMB for Review and
Approval; Comment Request; NSPS
for Flexible Vinyl and Urethane Coating
and Printing (Renewal)
Environmental Protection
Agency (EPA).
ACTION: Notice.
AGENCY:
The Environmental Protection
Agency (EPA) has submitted an
information collection request (ICR),
NSPS for Flexible Vinyl and Urethane
Coating and Printing (EPA ICR Number
1157.13, OMB Control Number 2060–
SUMMARY:
PO 00000
Frm 00034
Fmt 4703
Sfmt 4703
0073), to the Office of Management and
Budget (OMB) for review and approval
in accordance with the Paperwork
Reduction Act. This is a proposed
extension of the ICR, which is currently
approved through November 30, 2022.
Public comments were previously
requested, via the Federal Register, on
April 8, 2022 during a 60-day comment
period. This notice allows for an
additional 30 days for public comments.
A fuller description of the ICR is given
below, including its estimated burden
and cost to the public. An agency may
neither conduct nor sponsor, and a
person is not required to respond to a
collection of information unless it
displays a currently valid OMB control
number.
E:\FR\FM\22SEN1.SGM
22SEN1
]]>Agencies
[Federal Register Volume 87, Number 183 (Thursday, September 22, 2022)]
[Notices]
[Pages 57891-57897]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2022-20472]
=======================================================================
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2022-0132; FRL-9411-08]
Certain New Chemicals; Receipt and Status Information for August
2022
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA),
as amended by the Frank R. Lautenberg Chemical Safety for the 21st
Century Act, to make information publicly available and to publish
information in the Federal Register pertaining to submissions under
TSCA section 5, including notice of receipt of a Premanufacture notice
(PMN),
[[Page 57892]]
Significant New Use Notice (SNUN) or Microbial Commercial Activity
Notice (MCAN), including an amended notice or test information; an
exemption application (Biotech exemption); an application for a test
marketing exemption (TME), both pending and/or concluded; a notice of
commencement (NOC) of manufacture (including import) for new chemical
substances; and a periodic status report on new chemical substances
that are currently under EPA review or have recently concluded review.
This document covers the period from 08/01/2022 to 08/31/2022.
DATES: Comments identified by the specific case number provided in this
document must be received on or before October 24, 2022.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2022-0132, through the Federal eRulemaking
Portal at https://www.regulations.gov. Follow the online instructions
for submitting comments. Do not submit electronically any information
you consider to be Confidential Business Information (CBI) or other
information whose disclosure is restricted by statute. Additional
instructions on commenting and visiting the docket, along with more
information about dockets generally, is available at https://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim Rahai, Project Management
and Operations Division (MC 7407M), Office of Pollution Prevention and
Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW,
Washington, DC 20460-0001; telephone number: (202) 564-8593; email
address: [email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
I. Executive Summary
A. What action is the Agency taking?
This document provides the receipt and status reports for the
period from 08/01/2022 to 08/31/2022. The Agency is providing notice of
receipt of PMNs, SNUNs, and MCANs (including amended notices and test
information); an exemption application under 40 CFR part 725 (Biotech
exemption); TMEs, both pending and/or concluded; NOCs to manufacture a
new chemical substance; and a periodic status report on new chemical
substances that are currently under EPA review or have recently
concluded review.
EPA is also providing information on its website about cases
reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN
and exemption notices received, the date of receipt, the final EPA
determination on the notice, and the effective date of EPA's
determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a
weekly basis.
B. What is the Agency's authority for taking this action?
Under the Toxic Substances Control Act (TSCA), 15 U.S.C. 2601 et
seq., a chemical substance may be either an ``existing'' chemical
substance or a ``new'' chemical substance. Any chemical substance that
is not on EPA's TSCA Inventory of Chemical Substances (TSCA Inventory)
is classified as a ``new chemical substance,'' while a chemical
substance that is listed on the TSCA Inventory is classified as an
``existing chemical substance.'' (See TSCA section 3(11).) For more
information about the TSCA Inventory please go to: https://www.epa.gov/tsca-inventory.
Any person who intends to manufacture (including import) a new
chemical substance for a non-exempt commercial purpose, or to
manufacture or process a chemical substance in a non-exempt manner for
a use that EPA has determined is a significant new use, is required by
TSCA section 5 to provide EPA with a PMN, MCAN, or SNUN, as
appropriate, before initiating the activity. EPA will review the
notice, make a risk determination on the chemical substance or
significant new use, and take appropriate action as described in TSCA
section 5(a)(3).
TSCA section 5(h)(1) authorizes EPA to allow persons, upon
application and under appropriate restrictions, to manufacture or
process a new chemical substance, or a chemical substance subject to a
significant new use rule (SNUR) issued under TSCA section 5(a)(2), for
``test marketing'' purposes, upon a showing that the manufacture,
processing, distribution in commerce, use, and disposal of the chemical
will not present an unreasonable risk of injury to health or the
environment. This is referred to as a test marketing exemption, or TME.
For more information about the requirements applicable to a new
chemical go to: https://www.epa.gov/oppt/newchems.
Under TSCA sections 5 and 8 and EPA regulations, EPA is required to
publish in the Federal Register certain information, including notice
of receipt of a PMN/SNUN/MCAN (including amended notices and test
information); an exemption application under 40 CFR part 725 (biotech
exemption); an application for a TME, both pending and concluded; NOCs
to manufacture a new chemical substance; and a periodic status report
on the new chemical substances that are currently under EPA review or
have recently concluded review.
C. Does this action apply to me?
This action provides information that is directed to the public in
general.
D. Does this action have any incremental economic impacts or paperwork
burdens?
No.
E. What should I consider as I prepare my comments for EPA?
1. Submitting confidential business information (CBI). Do not
submit this information to EPA through regulations.gov or email.
Clearly mark the part or all of the information that you claim to be
CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark
the outside of the disk or CD-ROM as CBI and then identify
electronically within the disk or CD-ROM the specific information that
is claimed as CBI. In addition to one complete version of the comment
that includes information claimed as CBI, a copy of the comment that
does not contain the information claimed as CBI must be submitted for
inclusion in the public docket. Information so marked will not be
disclosed except in accordance with procedures set forth in 40 CFR part
2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at https://www.epa.gov/dockets/comments.html.
II. Status Reports
In the past, EPA has published individual notices reflecting the
status of TSCA section 5 filings received, pending or concluded. In
1995, the Agency modified its approach and streamlined the information
published in the Federal Register after providing notice of such
changes to the public and an opportunity to comment (See the Federal
Register of May 12, 1995, (60 FR 25798) (FRL-4942-7). Since the passage
of the Lautenberg amendments to TSCA in 2016, public interest in
information on the status of section 5 cases under EPA review and, in
particular, the final determination of
[[Page 57893]]
such cases, has increased. In an effort to be responsive to the
regulated community, the users of this information, and the general
public, to comply with the requirements of TSCA, to conserve EPA
resources and to streamline the process and make it more timely, EPA is
providing information on its website about cases reviewed under the
amended TSCA, including the section 5 PMN/SNUN/MCAN and exemption
notices received, the date of receipt, the final EPA determination on
the notice, and the effective date of EPA's determination for PMN/SNUN/
MCAN notices on its website at: https://www.epa.gov/reviewing-new-chemicals-under-toxic-substances-control-act-tsca/status-pre-manufacture-notices. This information is updated on a weekly basis.
III. Receipt Reports
For the PMN/SNUN/MCANs that have passed an initial screening by EPA
during this period, Table I provides the following information (to the
extent that such information is not subject to a CBI claim) on the
notices screened by EPA during this period: The EPA case number
assigned to the notice that indicates whether the submission is an
initial submission, or an amendment, a notation of which version was
received, the date the notice was received by EPA, the submitting
manufacturer (i.e., domestic producer or importer), the potential uses
identified by the manufacturer in the notice, and the chemical
substance identity.
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that this information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI. Submissions which are initial submissions
will not have a letter following the case number. Submissions which are
amendments to previous submissions will have a case number followed by
the letter ``A'' (e.g., P-18-1234A). The version column designates
submissions in sequence as ``1'', ``2'', ``3'', etc. Note that in some
cases, an initial submission is not numbered as version 1; this is
because earlier version(s) were rejected as incomplete or invalid
submissions. Note also that future versions of the following tables may
adjust slightly as the Agency works to automate population of the data
in the tables.
Table I--PMN/SNUN/MCANs Approved* From 08/01/2022 to 08/31/2022
----------------------------------------------------------------------------------------------------------------
Received
Case No. Version date Manufacturer Use Chemical substance
----------------------------------------------------------------------------------------------------------------
J-22-0017............. 1 08/09/2022 CBI................ (G) Production of (G) Microorganisms
an enzyme. transformed to express
an enzyme.
J-22-0017A............ 2 08/22/2022 CBI................ (G) Production of (G) Microorganisms
an enzyme. transformed to express
an enzyme.
J-22-0018............. 1 08/09/2022 CBI................ (G) Production of (G) Microorganisms
an enzyme. transformed to express
an enzyme.
J-22-0018A............ 2 08/22/2022 CBI................ (G) Production of (G) Microorganisms
an enzyme. transformed to express
an enzyme.
P-18-0057A............ 16 08/01/2022 CBI................ (S) A drier (G) Vanadium
accelerator that Carboxylate.
is used for
superior drying
performance in
solvent-borne and
waterborne air
dried paints, inks
and coatings.
P-18-0162A............ 6 07/27/2022 CBI................ (G) Adhesive (G) Cashew nutshell
component. liquid, polymer with
diisocyanatoalkane,
substituted-
polyoxyalkyldiol and
polyether polyol.
P-21-0016A............ 3 08/08/2022 CBI................ (G) Paint additive, (G) Alkanoic acid,
Additive in dialkyl ester.
coating
formulations,
Component in
cleaning agents.
P-21-0138A............ 4 08/04/2022 LG Energy Solution (S) Electrode (G) Lithium metal oxide.
Michigan, Inc. material for use
in the manufacture
of batteries.
P-22-0017A............ 3 08/03/2022 Sasol Chemicals (S) Alkylate for (S) 1-Eicosanol, manuf.
(USA), LLC. polymer esters. of, distn., residues.
P-22-0017A............ 4 08/11/2022 Sasol Chemicals (S) Alkylate for (S) 1-Eicosanol, manuf.
(USA), LLC. polymer esters. of, distn., residues.
P-22-0028A............ 4 08/12/2022 H.B. Fuller Company (S) Industrial (G) Polyester with 1,4-
Adhesive. benzenedicarboxylic
acid, 1,4-dimethyl 1,4-
benzebedicarboxylate,
2,2-dimethyl-1,3-
propanediol,
dodecanedioic acid, 1,2-
ethanediol, aliphatic
polyester, 3-hydroxy-
2,2-dimethylpropyl 3-
hydroxy-2,2-
dimethylpropanoate, 1,3-
isobenzofurandione and
1,1'-methylenebis[4-
isocyanatobenzene].
P-22-0029A............ 4 08/12/2022 H.B. Fuller Company (S) Industrial (G) Polyester with 1,4-
Adhesive. benzenedicarboxylic
acid, 1,4-dimethyl 1,4-
benzebedicarboxylate,
2,2-dimethyl-1,3-
propanediol,
dodecanedioic acid, 1,2-
ethanediol, aliphatic
polyester, 3-hydroxy-
2,2-dimethylpropyl 3-
hydroxy-2,2-
dimethylpropanoate, 1,3-
isobenzofurandione and
1,1'-
methylenebis[isocyanato
benzene].
P-22-0030A............ 4 08/12/2022 H.B. Fuller Company (S) Industrial (G) Polyester with 1,4-
Adhesive. benzenedicarboxylic
acid, 2,2-dimethyl-1,3-
propanediol,
dodecanedioic acid, 1,2-
ethanediol, aliphatic
polyester, 3-hydroxy-
2,2-dimethylpropyl 3-
hydroxy-2,2-
dimethylpropanoate, 1,3-
isobenzofurandione and
1,1'-methylenebis[4-
isocyanatobenzene].
P-22-0031A............ 4 08/12/2022 H.B. Fuller Company (S) Industrial (G) Polyester with 1,4-
Adhesive. benzenedicarboxylic
acid, 2,2-dimethyl-1,3-
propanediol,
dodecanedioic acid, 1,2-
ethanediol, aliphatic
polyester, 3-hydroxy-
2,2-dimethylpropyl 3-
hydroxy-2,2-
dimethylpropanoate, 1,3-
isobenzofurandione and
1,1'-
methylenebis[isocyanato
benzene].
P-22-0053............. 3 08/02/2022 CBI................ (G) Additive in (S) Ethanol, 2-amino-,
agricultural compds. with
formulations. polyethylene glycol
hydrogen sulfate C10-16-
alkyl ether.
P-22-0058............. 2 08/15/2022 Solvay Fluorides, (G) Process (S)
LLC. chemical. Methanesulfonamide,1,1,
1-trifluoro-N-
[(trifluoromethyl)sulfo
nyl]-, sodium salt
(1:1).
P-22-0058A............ 3 08/19/2022 Solvay Fluorides, (G) Process (S)
LLC. chemical. Methanesulfonamide,1,1,
1-trifluoro-N-
[(trifluoromethyl)sulfo
nyl]-, sodium salt
(1:1).
[[Page 57894]]
P-22-0093............. 2 07/28/2022 CBI................ (G) Additive used (G) Alkenoic acid, alkyl-
for pigment substituted alkyl
stabilization. ester, polymer with
(polyalkylamino)alkyl
alkylalkenoate, alkyl-
substituted
alkylalkenoate, alpha-
(alkyl-oxo-alkenyl)-
omega-alkoxypoly(oxy-
1,2-ethanediyl),
[(alkoxy-alkyl-
alkenyl)oxy]polyalkylsi
lane-initiated, compds.
with polyethylene
glycol phosphoric acid
based alkyl ether.
P-22-0121A............ 2 07/28/2022 CBI................ (G) Process (G) polychloroalkene.
Intermediate: New
chemical substance
will be used as a
process
intermediate.
P-22-0130A............ 3 08/19/2022 Integrity Bio- (S) Surfactant-- (S) Maltodextrin,
chemical, LLC. surface tension octanoate.
reducing agent for
use in production
enhancement in oil
wells
(industrial);
Emulsifier,
surface reduction
household and
industrial
detergents;
wetting agent
personal care;
wetting agent-
agriculture;
surfactants--as
raw materials for
use in the
manufacture of
industrial
products and
consumer and
household products.
P-22-0131A............ 3 08/19/2022 Integrity Bio- (S) Surfactant-- (S) Maltodextrin,
chemical, LLC. surface tension hexadecanoate.
reducing agent for
use in production
enhancement in oil
wells
(industrial);
Emulsifier,
Surface reduction
household and
industrial
detergents;
Emulsifier,
Wetting agent
Personal care;
Wetting agent--
Agriculture;
Surfactants--as
raw materials for
use in the
manufacture of
industrial
products and
consumer and
household products.
P-22-0132A............ 3 08/19/2022 Integrity Bio- (S) Surfactant-- (S) Maltodextrin,
chemical, LLC. surface tension decanoate.
reducing agent for
use in production
enhancement in oil
wells
(industrial);
Emulsifier,
Surface reduction
Household and
industrial
detergents;
Emulsifier,
Wetting agent
Personal care;
Wetting agent--
Agriculture;
Surfactants--as
raw materials for
use in the
manufacture of
industrial
products and
consumer and
household products.
P-22-0133A............ 3 08/19/2022 Integrity Bio- (S) Surfactant-- (S) Maltodextrin,
chemical, LLC. surface tension octadecanoate.
reducing agent for
use in production
enhancement in oil
wells
(industrial);
Emulsifier,
Surface reduction
formulation of
household and
industrial
detergents;
Emulsifier,
Wetting agent
Personal care;
Wetting agent--
Agriculture;
Surfactants--as
raw materials for
use in the
manufacture of
personal care and
household care
products (e.g.,
cleaners).
P-22-0134A............ 3 08/19/2022 Integrity Bio- (S) Surfactants--as (S) Maltodextrin,
chemical, LLC. raw materials for dodecanoate.
use in the
manufacture of
personal care and
household care
products (e.g.,
cleaners); Wetting
agent--Agriculture
, Surfactant--
surface tension
reducing agent for
use in production
enhancement in oil
wells
(industrial);
Emulsifier,
Surface reduction
formulation of
household and
industrial
detergents;
Emulsifier,
Wetting agent
Personal care.
P-22-0135A............ 3 08/19/2022 Integrity Bio- (S) Emulsifier, (S) Maltodextrin,
chemical, LLC. Wetting agent tetradecanoate.
Personal care;
Emulsifier,
Surface reduction
formulation of
household and
industrial
detergents;
Wetting agent--
Agriculture;
Surfactants--as
raw materials for
use in the
manufacture of
personal care and
household care
products (e.g.,
cleaners);
Surfactant--surfac
e tension reducing
agent for use in
production
enhancement in oil
wells (industrial).
P-22-0139............. 3 08/11/2022 CBI................ (G) Antioxidant/ (G)
Process Stabilizer. dialkylhydroxylamine.
P-22-0144A............ 2 07/27/2022 United Color (G) Intermediate... (G) Alkylated
Manufacturing. PhenylNaphthylamine.
P-22-0147A............ 3 08/18/2022 VP Racing Fuels, (S) Feedstock for (S) Hydrocarbons, C5-10.
Inc. Gasoline to
include Racing
Fuels.
P-22-0149............. 3 08/08/2022 Colonial Chemical, (S) All purpose (S) Hexanoic acid, 3,5,5-
Inc. hard surface trimethyl-, sodium salt
cleaner; Low foam (1:1).
floor scrubber;
Spray Metal
Cleaning
Concentrate.
P-22-0152............. 1 07/26/2022 CBI................ (G) (G) Sulfonium,
Photolithography. tricabocyclic-, 2-
heteroatom-substituted-
4-
alkylcarbomonocyclecarb
oxylate (1:1).
[[Page 57895]]
P-22-0153............. 2 08/18/2022 Huntsman (S) Notified (S) 2-Propenoic acid, 2-
International, LLC. substance will be methyl-, 2-hydroxyethyl
used as an ester, reaction
adhesion promoter products with 2-
in a resin used oxepanone homopolymer 2-
for adhesive and/ [(2-methyl-1-oxo-2-
or sealants in propen-1-yl)oxy]ethyl]
industrial ester and phosphorous
assembly or oxide (P2O5).
manufacturing
operations.
Through small
scale application
on assembly line,
manual use, or
automated use by
dispensing unit;
Notified substance
will be used as an
adhesion promoter
in a resin used
for adhesive and/
or sealants in
outdoor repair
operations by
professional
workers.
Application of
adhesives and
primers outdoors.
Small scale
application of
adhesives,
sealants or
primers. Small
scale application
of reactive
adhesives and
sealants.
Application of
reactive sealants.
P-22-0154............. 1 07/26/2022 Givaudan Fragrances (G) Fragrance (G) Acetyl, alkyl,
Corp. ingredient for use alkenoic acid, ethyl
in laundry ester.
applications.
P-22-0155............. 1 08/01/2022 CBI................ (G) Physical (G) 2-alkyl-1,2-
property modifier heteropolycycle-3-one.
for polyurethanes;
Modifier for
polyurethane
blends.
P-22-0156............. 1 08/08/2022 CBI................ (G) Epoxy additive. (G) Alkyl substituted
carbopolycyclic acids,
fumarated, and
heteromonocyclic
esters.
P-22-0157............. 1 08/10/2022 Evonik Corporation. (S) Polyurethane (S) 1,2-Ethanediamine,
catalyst. N1,N2-dimethyl-N1-(1-
methylethyl)-N2-[2-
[methyl(1-
methylethyl)amino]ethyl
]-.
P-22-0158............. 1 08/11/2022 Aqdot.............. (G) Additive used (S) 1H,4H,14H,17H-
in consumer, 2,16:3,15-Dimethano-
commercial, and 5H,6H,7H,8H,9H,10H,11H,
industrial 12H,13H,18H,19H,20H,21H
applications. ,22H,23H,24H,25H,26H-
2,3,4a,5a,6a,7a,8a,9a,1
0a,11a,12a,13a,15,16,17
a,18a,19a,20a,21a,22a,2
3a,24a,25a,26a-
tetracosaazabispentalen
o[1''',6''':5'',6'',7''
]cycloocta[1'',2'',3'':
3',4']pentaleno[1',6':5
,6,7]cycloocta[1,2,3-
gh:1',2',3'-
g'h']cycloocta[1,2,3-
cd:5,6,7-
c'd']dipentalene-
1,4,6,8,10,12,14,17,19,
21,23,25-dodecone,
dodecahydro-,
stereoisomer;(S)
2,18:3,17-Dimethano-
2,3,4a,5a,6a,7a,8a,9a,1
0a,11a,12a,13a,14a,15a,
17,18,19a,20a,21a,22a,2
3a,24a,25a,26a,27a,28a,
29a,30aoctacosaazabispe
ntaleno[1''''',6'''''''
:5'''',6'''',7'''']cycl
oocta[1'''',2'''',3''''
:3''',4''']pentaleno[1'
'',6''':5'',6'',7'']cyc
loocta[1'',2'',3'':3',4
']pentaleno[1',6':5,6,7
]cycloocta[1,2,3-
cd:1',2',3'-
gh]pentalene-
1,4,6,8,10,12,14,16,19,
21,23,25,27,29-
tetradecone,
tetradecahydro-,
stereoisomer;(S)
2,20:3,19-Dimethano-
2,3,4a,5a,6a,7a,8a,9a,1
0a,11a,12a,13a,14a,15a,
16a,17a,19,20,21a,22a,2
3a,24a,25a,26a,27a,28a,
29a,30a,31a,32a,33a,34a
dotriacontaazabispental
eno[1''''',6''''':5''''
,6'''',7'''']cycloocta[
1'''',2'''',3'''':3''',
4''']pentaleno[1''',6''
':5'',6'',7'']cycloocta
[1'',2'',3'':3',4']pent
aleno[1',6':5,6,7]cyclo
octa[1,2,3-gh:1',2',3'-
g'h']cycloocta[1,2,3-
cd:5,6,7-
c'd']dipentalene-
1,4,6,8,10,12,14,16,18,
21,23,25,27,29,31,33-
hexadecone,
hexadecahydro-,
stereoisomer.
P-22-0159............. 1 08/12/2022 CBI................ (G) Additive....... (G) Poly[oxy(methyl-1,2-
ethanediyl)], alpha-
hydro-omega-hydroxy-,
polymer with 1,3-
diisocyanatomethylbenze
ne, alkoxyl
methacrylate-blocked.
----------------------------------------------------------------------------------------------------------------
Received
Case No. Version date Manufacturer Use Chemical substance
----------------------------------------------------------------------------------------------------------------
P-22-0160............. 1 08/12/2022 Cytec Industries, (G) Industrial process (S) 1lambda5-2,1-
Inc. chemical. Benzoxaphosphol-
3(1H)-one, 1,1-
dicyclohexyl-.
P-22-0161............. 1 08/12/2022 CBI................ (G) Photolithography.... (G) Sulfonium,
tricarbocyclic-,
salt with
[polyhydro-2-alkyl-
5-(polyhalo-2-
heteroalkyl)-
alkano-1,3-
hetropolycyclic]al
kyl polyhaloaryl
ester (1:1).
P-22-0162............. 3 08/15/2022 CBI................ (S) Intermediate used in (G)
the production of para- Haloalkylfurancarb
xylene (pX),(S) oxaldehyde.
Flexible intermediate
used in the production
of FDCA/PET and other
specialty chemicals.
P-22-0167............. 1 08/26/2022 CBI................ (G) Photolithography.... (G) 1,2-
Cycloalkanedicarbo
xylic acid, 1,2-
bis(2-
oxiranylalkyl)
ester, reaction
products with
unsaturated
carboxylic acid.
----------------------------------------------------------------------------------------------------------------
[[Page 57896]]
Table I--PMN/SNUN/MCANs Approved* From 08/01/2022 to 08/31/2022--Continued
----------------------------------------------------------------------------------------------------------------
Received
Case No. Version date Manufacturer Use Chemical substance
----------------------------------------------------------------------------------------------------------------
SN-22-0002A........... 3 08/26/2022 Eastman Chemical (S) Solvent-borne (S) 2-Pyrrolidinone, 1-
Company, Inc. coatings; butyl-.
Dispersions for
industrial
coatings (e.g.,
polyurethane,
acrylic, epoxy);
Current, Approved
Use: Paint
removers; Current,
Approved Use:
Solvent for
formulation of
active ingredients
for agriculture-
end use pesticide
product; Current,
Approved Use:
Solvent for
production and
formulation of
active ingredients
for agriculture;
Current, Approved
Use: Solvents for
production and
formulation of
fertilizer;
Current, Approved
Use: Paint
stripper only for
industrial use;
Current, Approved
Use: Petrochemical
extraction
processes;
Current, Approved
Use: Wax
inhibitors (in
hydrocarbon
lines); Current,
Approved Use:
Solvent for
cleaning
industrial
reactors; Current,
Approved Use:
Industrial cleaner
(e.g., cleaner for
wind turbine, oil
rigs, large
engines); Current,
Approved Use:
Formulation of
inks; Current,
Approved Use:
Coatings for
microelectronics
(e.g., casting of
polymer films) in
clean rooms;
Current, Approved
Use: Solvent for
chemical synthesis
reactions;
Current, Approved
Use: Reaction
medium for
polymerization,
polymer coatings
for industrial and
professional
applications
(e.g., wire
enamel, non-stick
and friction
reduction coating)
membranes;
Current, Approved
Use: Photoresist
stripping in
microelectronics
in clean rooms;
Current, Approved
Use: Silicon wafer
cleaning in
microelectronics
in clean rooms;
Current, Approved
Use: Solvent-borne
industrial
coatings; Current,
Approved Use:
Adhesives and
sealants; Current,
Approved Use:
Coating for
consumer and
professional use;
(G) Industrial
Cleaner; Solvent
for article
production;
Reprocessing;
Reaction medium
for
polymerization,
polymer coatings
for industrial and
professional
applications;
Coatings for
commercial use,
spray coating;
Consumer use other
than brush on;
Coatings for
consumer use,
brush on coatings.
SN-22-0007A........... 3 08/16/2022 Braven (G) Product of (S) Waste plastics,
Environmental, LLC. Pyrolysis pyrolyzed, C5-12
manufacturing. fraction.
SN-22-0008A........... 3 08/16/2022 Braven (G) Product of (S) Waste plastics,
Environmental, LLC. Pyrolysis pyrolyzed, C20-55
Manufacturing. fraction.
SN-22-0009A........... 3 08/16/2022 Braven (G) Product of (S) Waste plastics,
Environmental, LLC. Pyrolysis pyrolyzed, C9-20
Manufacturing. fraction.
SN-22-0010A........... 2 08/05/2022 CBI................ (S) Monomer (S) 2-Oxazolidinone, 3-
chemical, reactive ethenyl-5-methyl-.
diluent in UV
coating
formulations (this
is new use);
Reactive diluent
for 3D printing
formulations
(existing use,
approved by PMN
P18-0392); Monomer
or reactive
diluent in UV-
inkjet and screen
printing ink
formulations
(existing use,
approved by PMN P-
18-0392); Reactive
diluent, additive
in UV adhesive
formulations (this
is new use).
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission prior to the start of the 90 day review
period, and in no way reflects the final status of a complete submission review.
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
that have passed an initial screening by EPA during this period: The
EPA case number assigned to the NOC including whether the submission
was an initial or amended submission, the date the NOC was received by
EPA, the date of commencement provided by the submitter in the NOC, a
notation of the type of amendment (e.g., amendment to generic name,
specific name, technical contact information, etc.) and chemical
substance identity.
[[Page 57897]]
Table II--NOCs Approved * From 08/01/2022 to 08/31/2022
----------------------------------------------------------------------------------------------------------------
Commencement If amendment, type of
Case No. Received date date amendment Chemical substance
----------------------------------------------------------------------------------------------------------------
J-22-0011.................. 07/27/2022 07/25/2022 N....................... (G) Biofuel producing
saccharomyces
cerevisiae modified,
genetically stable.
P-11-0242A................. 08/02/2022 07/09/2021 Revised generic name and (G) Bicycloolefinic
added manufacturing/ hydroxyester.
import site.
P-15-0734.................. 08/11/2022 08/02/2022 N....................... (G) Acrylate, polymer
with substituted
ethyleneamine.
P-18-0289A................. 08/17/2022 06/22/2022 Revised generic name.... (G) 2-
(2(phenylmethylene)ami
no)ethoxy)-alcohol.
P-18-0290A................. 08/17/2022 06/22/2022 Revised generic name.... (G) Phenyl-oxazolidine.
P-19-0046.................. 08/24/2022 05/03/2019 N....................... (S) 1,2,4-
benzenetricarboxylic
acid, mixed decyl and
octyl triesters.
P-19-0143.................. 08/07/2022 07/21/2022 N....................... (G) Aldehyde, polymer
with mixed
alkanepolyamines, 2,2-
[1,4-
alkanediylbis(oxyalkyl
ene)] bis[oxirane], 2-
(alkoxyalkyloxirane,
4,4-(1-
alkylidene)bis[phenol]
, 2,2-[(1-
alkylidene)bis(4,1-
alkyleneoxyalkylene)]b
is[oxirane] and 2-
(aryloxyalkyl)oxirane,
acetate (salt).
P-19-0144.................. 08/07/2022 07/21/2022 N....................... (G) Alkanedioic acid,
compds. with
substituted
arylalkylamine-
arylalcohol
disubstituted alkane--
the diglycidyl ether
of a arylalcohol
disubstituted alkane-
epichlorohydrin-
aldehyde-2,2-[(1-
alkylidene)bis[4,1-
aryleneoxy(alkyl-2,1-
alkanediyl)oxyalkylene
]]bis[oxirane]-
alkanepolyamine
polymer-1-[[2-[(2-
aminoalkyl)amino]alkyl
]amino]-3-aryloxy-2-
alcohol reaction
products.
P-20-0127.................. 08/29/2022 08/23/2022 N....................... (S) 2h-pyran,
tetrahydro-4-methyl-.
P-21-0196.................. 08/17/2022 07/20/2022 N....................... (S) 5h-1,2-oxathiole,
2,2-dioxide.
P-21-0197.................. 08/17/2022 07/20/2022 N....................... (G) Imidazole-
carboxylic acid,
substituted.
----------------------------------------------------------------------------------------------------------------
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required
information and documents have been provided with the submission.
In Table III of this unit, EPA provides the following information
(to the extent such information is not subject to a CBI claim) on the
test information that has been received during this time period: The
EPA case number assigned to the test information; the date the test
information was received by EPA, the type of test information
submitted, and chemical substance identity.
Table III--Test Information Received From 08/01/2022 to 08/31/2022
----------------------------------------------------------------------------------------------------------------
Type of test
Case No. Received date information Chemical substance
----------------------------------------------------------------------------------------------------------------
P-15-0443............................ 08/10/2022............. 90-Day Inhalation (G) Rare earth doped
Toxicity Testing (OECD zirconium oxide.
Test Guideline 413).
P-16-0543............................ 08/03/2022............. Industrial Hygiene (G) Halogenophos phoric
Exposure Report. acid metal salt.
----------------------------------------------------------------------------------------------------------------
If you are interested in information that is not included in these
tables, you may contact EPA's technical information contact or general
information contact as described under FOR FURTHER INFORMATION CONTACT
to access additional non-CBI information that may be available.
Authority: 15 U.S.C. 2601 et seq.
Dated: September 15, 2022.
Pamela Myrick,
Director, Project Management and Operations Division, Office of
Pollution Prevention and Toxics.
[FR Doc. 2022-20472 Filed 9-21-22; 8:45 am]
BILLING CODE 6560-50-P
