Certain Steel Nails From the Republic of Turkey: Final Affirmative Countervailing Duty Determination, 51339-51341 [2022-18053]

Download as PDF jspears on DSK121TN23PROD with NOTICES Federal Register / Vol. 87, No. 161 / Monday, August 22, 2022 / Notices not limited to, smooth, barbed, screw threaded, ring shank and fluted. Screw-threaded nails subject to this proceeding are driven using direct force and not by turning the nail using a tool that engages with the head. Point styles include, but are not limited to, diamond, needle, chisel and blunt or no point. Certain steel nails may be sold in bulk, or they may be collated in any manner using any material. Excluded from the scope are certain steel nails packaged in combination with one or more non-subject articles, if the total number of nails of all types, in aggregate regardless of size, is less than 25. If packaged in combination with one or more non-subject articles, certain steel nails remain subject merchandise if the total number of nails of all types, in aggregate regardless of size, is equal to or greater than 25, unless otherwise excluded based on the other exclusions below. Also excluded from the scope are certain steel nails with a nominal shaft or shank length of one inch or less that are a component of an unassembled article, where the total number of nails is sixty (60) or less, and the imported unassembled article falls into one of the following eight groupings: (1) Builders’ joinery and carpentry of wood that are classifiable as windows, French-windows and their frames; (2) builders’ joinery and carpentry of wood that are classifiable as doors and their frames and thresholds; (3) swivel seats with variable height adjustment; (4) seats that are convertible into beds (with the exception of those classifiable as garden seats or camping equipment); (5) seats of cane, osier, bamboo or similar materials; (6) other seats with wooden frames (with the exception of seats of a kind used for aircraft or motor vehicles); (7) furniture (other than seats) of wood (with the exception of (i) medical, surgical, dental or veterinary furniture; and (ii) barbers’ chairs and similar chairs, having rotating as well as both reclining and elevating movements); or (8) furniture (other than seats) of materials other than wood, metal, or plastics (e.g., furniture of cane, osier, bamboo or similar materials). The aforementioned imported unassembled articles are currently classified under the following Harmonized Tariff Schedule of the United States (HTSUS) subheadings: 4418.10, 4418.20, 9401.30, 9401.40, 9401.51, 9401.59, 9401.61, 9401.69, 9403.30, 9403.40, 9403.50, 9403.60, 9403.81 or 9403.89. Also excluded from the scope of this investigation are nails suitable for use in powder-actuated hand tools, whether or not threaded, which are currently classified under HTSUS subheadings 7317.00.2000 and 7317.00.3000. Also excluded from the scope of this investigation are nails suitable for use in gasactuated hand tools. These nails have a case hardness greater than or equal to 50 on the Rockwell Hardness C scale (HRC), a carbon content greater than or equal to 0.5 percent, a round head, a secondary reduced-diameter raised head section, a centered shank, and a smooth symmetrical point. Also excluded from the scope of this investigation are corrugated nails. A corrugated nail is made up of a small strip of corrugated steel with sharp points on one side. VerDate Sep<11>2014 18:17 Aug 19, 2022 Jkt 256001 Also excluded from the scope of this investigation are thumb tacks, which are currently classified under HTSUS subheading 7317.00.1000. Also excluded from the scope are decorative or upholstery tacks. Certain steel nails subject to this investigation are currently classified under HTSUS subheadings 7317.00.5501, 7317.00.5502, 7317.00.5503, 7317.00.5505, 7317.00.5507, 7317.00.5508, 7317.00.5511, 7317.00.5518, 7317.00.5519, 7317.00.5520, 7317.00.5530, 7317.00.5540, 7317.00.5550, 7317.00.5560, 7317.00.5570, 7317.00.5580, 7317.00.5590, 7317.00.6530, 7317.00.6560 and 7317.00.7500. Certain steel nails subject to this investigation also may be classified under HTSUS subheadings 7318.15.5090, 7907.00.6000, 8206.00.0000 or other HTSUS subheadings. While the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this investigation is dispositive. Appendix II List of Topics Discussed in the Decision Memorandum I. Summary II. Background III. Scope of the Investigation IV. Subsidies Valuation Information V. Analysis of Programs VI. Analysis of Comments Comment 1: Whether Commerce Should Revise the Base Rate of Taxation Used in its Income Tax Exemption Benefit Calculation Comment 2: Whether Commerce Should Alter its Treatment of Certain Income Tax Deductions Comment 3: Whether the Board of Investment’s (BOI) Provision of Land to Trinity Steel is Countervailable A. Investigation into Countervailability of Trinity Steel’s Land Acquisition B. Selection of the Land Benchmark Comment 4: Whether Commerce Should Continue to Countervail Import Duty Exemptions on Raw Material Imports VII. Recommendation [FR Doc. 2022–18050 Filed 8–19–22; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration 51339 Ajay Menon or Macey Mayes, AD/CVD Operations, Office II, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–0208 or (202) 482–4473, respectively. SUPPLEMENTARY INFORMATION: FOR FURTHER INFORMATION CONTACT: Background On June 7, 2022, Commerce published the Preliminary Determination in the Federal Register.1 For a complete description of the events that followed the Preliminary Determination, see the Issues and Decision Memorandum.2 The Issues and Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance’s Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at https://access.trade.gov. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly at https://access.trade.gov/ public/FRNoticesListLayout.aspx. Period of Investigation The period of investigation is January 1, 2020, through December 31, 2020. Scope of the Investigation The products covered by this investigation are steel nails from Turkey. For a complete description of the scope of this investigation, see Appendix I. Scope Comments On July 5, 2022, Commerce issued the Preliminary Scope Memorandum.3 Commerce made no changes to the scope of this investigation since the Preliminary Determination. Analysis of Subsidy Programs and Comments Received The subsidy programs under investigation, and the issues raised in [C–489–847] Certain Steel Nails From the Republic of Turkey: Final Affirmative Countervailing Duty Determination Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY: The U.S. Department of Commerce (Commerce) determines that countervailable subsidies are being provided to producers and exporters of certain steel nails (steel nails) from the Republic of Turkey (Turkey). DATES: Applicable August 22, 2022. AGENCY: PO 00000 Frm 00010 Fmt 4703 Sfmt 4703 1 See Certain Steel Nails from the Republic of Turkey: Preliminary Affirmative Countervailing Duty Determination, 87 FR 34649 (June 7, 2022) (Preliminary Determination), and accompanying Preliminary Decision Memorandum. 2 See Memorandum, ‘‘Decision Memorandum for the Final Determination of the Countervailing Duty Investigation of Certain Steel Nails from the Republic of Turkey,’’ dated concurrently with, and hereby adopted by, this notice (Issues and Decision Memorandum). 3 See Memorandum, ‘‘Antidumping Duty Investigations of Certain Steel Nails from India, Sri Lanka, Thailand, and Turkey and Countervailing Duty Investigations of Certain Steel Nails from India, Oman, Sri Lanka, Thailand, and Turkey: Preliminary Scope Decision Memorandum,’’ dated July 5, 2022 (Preliminary Scope Memorandum). E:\FR\FM\22AUN1.SGM 22AUN1 51340 Federal Register / Vol. 87, No. 161 / Monday, August 22, 2022 / Notices the case and rebuttal briefs by parties in this investigation, are discussed in the Issues and Decision Memorandum. For a list of the issues raised by parties, and to which we responded in the Issues and Decision Memorandum, see Appendix II of this notice. Methodology Commerce conducted this investigation in accordance with section 701 of the Tariff Act of 1930, as amended (the Act). For each of the subsidy programs found to be countervailable, Commerce determines that there is a subsidy, i.e., a financial contribution by an ‘‘authority’’ that gives rise to a benefit to the recipient and that the subsidy is specific.4 For a full description of the methodology underlying our final determination, see the Issues and Decision Memorandum. Verification Commerce was unable to conduct onsite verification of the information relied upon in making its final determination in this investigation. However, we took additional steps in lieu of on-site verification to verify the information relied upon in making this final determination, in accordance with section 782(i) of the Act.5 Changes Since the Preliminary Determination Based on our review and analysis of the information received in lieu of onsite verification and comments received from parties, we made certain changes to the subsidy rate calculations for Sertel Vida Metal A.S. (Sertel) since the Preliminary Determination. As a result of these changes, Commerce also revised the all-others rate. For a discussion of these changes, see the Issues and Decision Memorandum. jspears on DSK121TN23PROD with NOTICES All-Others Rate In accordance with section 705(c)(1)(B)(i)(I) of the Act, we calculated countervailable subsidy rates for the individually investigated exporters and producers (i.e., Aslanbas Civi Tel Ve Celik Hasir San A.S. and Sertel). Consistent with sections 705(c)(1)(B)(i)(I) and 705(c)(5)(A) of the Act, we also calculated an estimated allothers rate for exporters and producers not individually investigated. Section 705(c)(5)(A)(i) of the Act states that ‘‘the 4 See sections 771(5)(B) and (D) of the Act regarding financial contribution; section 771(5)(E) of the Act regarding benefit; and section 771(5A) of the Act regarding specificity. 5 See Commerce’s Letters, ‘‘Verification Questionnaire for Aslanbas Civi Tel Ve Celik Hasir San A.S.,’’ dated June 9, 2022; and ‘‘Verification Questionnaire for Sertel Vida Metals A.S.,’’ dated June 9, 2022. VerDate Sep<11>2014 18:17 Aug 19, 2022 Jkt 256001 all-others rate shall be equal to the weighted-average countervailable subsidy rates established for exporters and producers individually investigated, excluding any zero and de minimis countervailable subsidy rates, and any rates determined entirely under section 776 {of the Act}.’’ Therefore, Commerce calculated the all-others rate using a weighted average of the individual estimated subsidy rates calculated for the examined respondents using each company’s publicly ranged sales value for the merchandise under consideration.6 Final Determination Commerce determines that the following estimated net countervailable subsidy rates exist: the date of publication of the Preliminary Determination in the Federal Register. If the U.S. International Trade Commission (ITC) issues a final affirmative injury determination, we will issue a countervailing duty order and require a cash deposit of estimated countervailing duties for such entries of subject merchandise in the amounts indicated above, in accordance with section 706(a) of the Act. If the ITC determines that material injury, or threat of material injury, does not exist, this proceeding will be terminated, and all estimated duties deposited or securities posted as a result of the suspension of liquidation will be refunded or canceled. ITC Notification Subsidy rate (percent ad valorem) In accordance with section 705(d) of the Act, Commerce will notify the ITC of its final affirmative determination Aslanbas Civi Tel Ve Celik that countervailable subsidies are being Hasir San A.S ................... 3.88 provided to producers and exporters of Sertel Vida Metal A.S ........... 1.52 All Others .............................. 1.86 steel nails from Turkey. As Commerce’s final determination is affirmative, in accordance with section 705(b) of the Disclosure Act, the ITC will determine, within 45 Commerce intends to disclose its days, whether the domestic industry in calculations performed to interested the United States is materially injured, parties in this final determination or threatened with material injury, by within five days of any public reason of imports of steel nails from announcement, or if there is no public Turkey. In addition, we are making announcement, within five days of the available to the ITC all non-privileged date of publication of this notice in and non-proprietary information related accordance with 19 CFR 351.224(b). to this investigation. We will allow the ITC access to all privileged and business Continuation of Suspension of proprietary information in our files, Liquidation provided the ITC confirms that it will As a result of our Preliminary Determination, and pursuant to sections not disclose such information, either publicly or under an administrative 703(d)(1)(B) and (d)(2) of the Act, Commerce instructed U.S. Customs and protective order (APO), without the written consent of the Assistant Border Protection (CBP) to suspend Secretary for Enforcement and liquidation of entries of subject Compliance. merchandise as described in the scope of the investigation section entered, or Administrative Protective Order withdrawn from warehouse, for In the event that the ITC issues a final consumption on or after June 7, 2022, negative injury determination, this notice will serve as the only reminder 6 With two respondents under examination, to parties subject to the APO of their Commerce normally calculates: (A) a weighted average of the estimated subsidy rates calculated for responsibility concerning the the examined respondents; (B) a simple average of destruction of proprietary information the estimated subsidy rates calculated for the disclosed under APO in accordance examined respondents; and (C) a weighted average of the estimated subsidy rates calculated for the with 19 CFR 351.305(a)(3). Timely examined respondents using each company’s written notification of the return/ publicly-ranged U.S. sale values for the destruction of APO materials or merchandise under consideration. Commerce then conversion to judicial protective order is compares (B) and (C) to (A) and selects the rate closest to (A) as the most appropriate rate for all hereby requested. Failure to comply other producers and exporters. As complete with the regulations and terms of an publicly ranged sales data were available, APO is a violation which is subject to Commerce based the all-others rate on the publicly ranged sales data of the mandatory respondents. See sanction. Company Memorandum, ‘‘Final Determination of the Countervailing Duty Investigation of Certain Steel Nails from the Republic of Turkey: All-Others Rate Calculation Memorandum,’’ dated concurrently with this determination. PO 00000 Frm 00011 Fmt 4703 Sfmt 4703 Notification to Interested Parties This determination is issued and published pursuant to sections 705(d) E:\FR\FM\22AUN1.SGM 22AUN1 Federal Register / Vol. 87, No. 161 / Monday, August 22, 2022 / Notices and 771(i) of the Act, and 19 CFR 351.210(c). Dated: August 15, 2022. Lisa W. Wang, Assistant Secretary for Enforcement and Compliance. jspears on DSK121TN23PROD with NOTICES Appendix I Scope of the Investigation The merchandise covered by this investigation is certain steel nails having a nominal shaft or shank length not exceeding 12 inches. Certain steel nails include, but are not limited to, nails made from round wire and nails that are cut from flat-rolled steel or long-rolled flat steel bars. Certain steel nails may be of one piece construction or constructed of two or more pieces. Examples of nails constructed of two or more pieces include, but are not limited to, anchors comprised of an anchor body made of zinc or nylon and a steel pin or a steel nail; crimp drive anchors; split-drive anchors, and strike pin anchors. Also included in the scope are anchors of one piece construction. Certain steel nails may be produced from any type of steel, and may have any type of surface finish, head type, shank, point type and shaft diameter. Finishes include, but are not limited to, coating in vinyl, zinc (galvanized, including but not limited to electroplating or hot dipping one or more times), phosphate, cement, and paint. Certain steel nails may have one or more surface finishes. Head styles include, but are not limited to, flat, projection, cupped, oval, brad, headless, double, countersunk, and sinker. Shank or shaft styles include, but are not limited to, smooth, barbed, screw threaded, ring shank and fluted. Screw-threaded nails subject to this proceeding are driven using direct force and not by turning the nail using a tool that engages with the head. Point styles include, but are not limited to, diamond, needle, chisel and blunt or no point. Certain steel nails may be sold in bulk, or they may be collated in any manner using any material. Excluded from the scope are certain steel nails packaged in combination with one or more non-subject articles, if the total number of nails of all types, in aggregate regardless of size, is less than 25. If packaged in combination with one or more non-subject articles, certain steel nails remain subject merchandise if the total number of nails of all types, in aggregate regardless of size, is equal to or greater than 25, unless otherwise excluded based on the other exclusions below. Also excluded from the scope are certain steel nails with a nominal shaft or shank length of one inch or less that are a component of an unassembled article, where the total number of nails is sixty (60) or less, and the imported unassembled article falls into one of the following eight groupings: (1) Builders’ joinery and carpentry of wood that are classifiable as windows, French-windows and their frames; (2) builders’ joinery and carpentry of wood that are classifiable as doors and their frames and thresholds; (3) swivel seats with variable height adjustment; (4) seats that are convertible into beds (with the exception of those classifiable as garden VerDate Sep<11>2014 18:17 Aug 19, 2022 Jkt 256001 seats or camping equipment); (5) seats of cane, osier, bamboo or similar materials; (6) other seats with wooden frames (with the exception of seats of a kind used for aircraft or motor vehicles); (7) furniture (other than seats) of wood (with the exception of (i) medical, surgical, dental or veterinary furniture; and (ii) barbers’ chairs and similar chairs, having rotating as well as both reclining and elevating movements); or (8) furniture (other than seats) of materials other than wood, metal, or plastics (e.g., furniture of cane, osier, bamboo or similar materials). The aforementioned imported unassembled articles are currently classified under the following Harmonized Tariff Schedule of the United States (HTSUS) subheadings: 4418.10, 4418.20, 9401.30, 9401.40, 9401.51, 9401.59, 9401.61, 9401.69, 9403.30, 9403.40, 9403.50, 9403.60, 9403.81 or 9403.89. Also excluded from the scope of this investigation are nails suitable for use in powder-actuated hand tools, whether or not threaded, which are currently classified under HTSUS subheadings 7317.00.2000 and 7317.00.3000. Also excluded from the scope of this investigation are nails suitable for use in gasactuated hand tools. These nails have a case hardness greater than or equal to 50 on the Rockwell Hardness C scale (HRC), a carbon content greater than or equal to 0.5 percent, a round head, a secondary reduced-diameter raised head section, a centered shank, and a smooth symmetrical point. Also excluded from the scope of this investigation are corrugated nails. A corrugated nail is made up of a small strip of corrugated steel with sharp points on one side. Also excluded from the scope of this investigation are thumb tacks, which are currently classified under HTSUS subheading 7317.00.1000. Also excluded from the scope are decorative or upholstery tacks. Certain steel nails subject to this investigation are currently classified under HTSUS subheadings 7317.00.5501, 7317.00.5502, 7317.00.5503, 7317.00.5505, 7317.00.5507, 7317.00.5508, 7317.00.5511, 7317.00.5518, 7317.00.5519, 7317.00.5520, 7317.00.5530, 7317.00.5540, 7317.00.5550, 7317.00.5560, 7317.00.5570, 7317.00.5580, 7317.00.5590, 7317.00.6530, 7317.00.6560 and 7317.00.7500. Certain steel nails subject to this investigation also may be classified under HTSUS subheadings 7318.15.5090, 7907.00.6000, 8206.00.0000 or other HTSUS subheadings. While the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this investigation is dispositive. Appendix II List of Topics Discussed in the Issues and Decision Memorandum: I. Summary II. Background III. Subsidies Valuation Information IV. Analysis of Programs V. Analysis of Comments Comment 1: Steel Wire Rod for Less Than Adequate Remuneration (LTAR)— Applying Adverse Facts Available (AFA) to Aslanbas Civi Tel Ve Celik Hasir San PO 00000 Frm 00012 Fmt 4703 Sfmt 4703 51341 A.S.’s (Aslanbas) and Sertel Vida Metal A.S.’s (Sertel) Purchases Comment 2: Steel Wire Rod for LTAR— Including Purchases That Exceed the Benchmark Price Comment 3: Steel Wire Rod for LTAR— Adjusting for Freight Charges Comment 4: Steel Wire Rod for LTAR— Removing Purchases From Resellers from the Benchmark for Aslanbas Comment 5: Steel Wire Rod for LTAR— Correcting the August Benchmark for Aslanbas VI. Recommendation [FR Doc. 2022–18053 Filed 8–19–22; 8:45 am] BILLING CODE 3510–DS–P DEPARTMENT OF COMMERCE International Trade Administration [C–821–837] Sodium Nitrite From the Russian Federation: Countervailing Duty Order Enforcement and Compliance, International Trade Administration, Department of Commerce. SUMMARY: Based on affirmative final determinations by the U.S. Department of Commerce (Commerce) and the U.S. International Trade Commission (ITC), Commerce is issuing the countervailing duty order on sodium nitrite from the Russian Federation (Russia). DATES: Applicable August 22, 2022. FOR FURTHER INFORMATION CONTACT: Melissa Porpotage, AD/CVD Operations, Office II, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482–1413. SUPPLEMENTARY INFORMATION: AGENCY: Background In accordance with section 705(d) of the Tariff Act of 1930, as amended (the Act), on June 28, 2022, Commerce published its affirmative final determination in the countervailing duty investigation of sodium nitrite from Russia.1 On August 15, 2022, the ITC notified Commerce of its affirmative final determination that an industry in the United States is materially injured within the meaning of section 705(b)(1)(A)(i) of the Act by reason of subsidized imports of subject merchandise from Russia.2 Scope of the Order The product covered by this order is sodium nitrite from Russia. For a 1 See Sodium Nitrite from the Russian Federation: Final Affirmative Duty Determination, 87 FR 38375 (June 28, 2022). 2 See ITC’S Letter, ‘‘Notification of ITC Final Determination,’’ dated August 15, 2022. E:\FR\FM\22AUN1.SGM 22AUN1

Agencies

[Federal Register Volume 87, Number 161 (Monday, August 22, 2022)]
[Notices]
[Pages 51339-51341]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2022-18053]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[C-489-847]


Certain Steel Nails From the Republic of Turkey: Final 
Affirmative Countervailing Duty Determination

AGENCY: Enforcement and Compliance, International Trade Administration, 
Department of Commerce.

SUMMARY: The U.S. Department of Commerce (Commerce) determines that 
countervailable subsidies are being provided to producers and exporters 
of certain steel nails (steel nails) from the Republic of Turkey 
(Turkey).

DATES: Applicable August 22, 2022.

FOR FURTHER INFORMATION CONTACT: Ajay Menon or Macey Mayes, AD/CVD 
Operations, Office II, Enforcement and Compliance, International Trade 
Administration, U.S. Department of Commerce, 1401 Constitution Avenue 
NW, Washington, DC 20230; telephone: (202) 482-0208 or (202) 482-4473, 
respectively.

SUPPLEMENTARY INFORMATION:

Background

    On June 7, 2022, Commerce published the Preliminary Determination 
in the Federal Register.\1\ For a complete description of the events 
that followed the Preliminary Determination, see the Issues and 
Decision Memorandum.\2\ The Issues and Decision Memorandum is a public 
document and is on file electronically via Enforcement and Compliance's 
Antidumping and Countervailing Duty Centralized Electronic Service 
System (ACCESS). ACCESS is available to registered users at https://access.trade.gov. In addition, a complete version of the Issues and 
Decision Memorandum can be accessed directly at https://access.trade.gov/public/FRNoticesListLayout.aspx.
---------------------------------------------------------------------------

    \1\ See Certain Steel Nails from the Republic of Turkey: 
Preliminary Affirmative Countervailing Duty Determination, 87 FR 
34649 (June 7, 2022) (Preliminary Determination), and accompanying 
Preliminary Decision Memorandum.
    \2\ See Memorandum, ``Decision Memorandum for the Final 
Determination of the Countervailing Duty Investigation of Certain 
Steel Nails from the Republic of Turkey,'' dated concurrently with, 
and hereby adopted by, this notice (Issues and Decision Memorandum).
---------------------------------------------------------------------------

Period of Investigation

    The period of investigation is January 1, 2020, through December 
31, 2020.

Scope of the Investigation

    The products covered by this investigation are steel nails from 
Turkey. For a complete description of the scope of this investigation, 
see Appendix I.

Scope Comments

    On July 5, 2022, Commerce issued the Preliminary Scope 
Memorandum.\3\ Commerce made no changes to the scope of this 
investigation since the Preliminary Determination.
---------------------------------------------------------------------------

    \3\ See Memorandum, ``Antidumping Duty Investigations of Certain 
Steel Nails from India, Sri Lanka, Thailand, and Turkey and 
Countervailing Duty Investigations of Certain Steel Nails from 
India, Oman, Sri Lanka, Thailand, and Turkey: Preliminary Scope 
Decision Memorandum,'' dated July 5, 2022 (Preliminary Scope 
Memorandum).
---------------------------------------------------------------------------

Analysis of Subsidy Programs and Comments Received

    The subsidy programs under investigation, and the issues raised in

[[Page 51340]]

the case and rebuttal briefs by parties in this investigation, are 
discussed in the Issues and Decision Memorandum. For a list of the 
issues raised by parties, and to which we responded in the Issues and 
Decision Memorandum, see Appendix II of this notice.

Methodology

    Commerce conducted this investigation in accordance with section 
701 of the Tariff Act of 1930, as amended (the Act). For each of the 
subsidy programs found to be countervailable, Commerce determines that 
there is a subsidy, i.e., a financial contribution by an ``authority'' 
that gives rise to a benefit to the recipient and that the subsidy is 
specific.\4\ For a full description of the methodology underlying our 
final determination, see the Issues and Decision Memorandum.
---------------------------------------------------------------------------

    \4\ See sections 771(5)(B) and (D) of the Act regarding 
financial contribution; section 771(5)(E) of the Act regarding 
benefit; and section 771(5A) of the Act regarding specificity.
---------------------------------------------------------------------------

Verification

    Commerce was unable to conduct on-site verification of the 
information relied upon in making its final determination in this 
investigation. However, we took additional steps in lieu of on-site 
verification to verify the information relied upon in making this final 
determination, in accordance with section 782(i) of the Act.\5\
---------------------------------------------------------------------------

    \5\ See Commerce's Letters, ``Verification Questionnaire for 
Aslanbas Civi Tel Ve Celik Hasir San A.S.,'' dated June 9, 2022; and 
``Verification Questionnaire for Sertel Vida Metals A.S.,'' dated 
June 9, 2022.
---------------------------------------------------------------------------

Changes Since the Preliminary Determination

    Based on our review and analysis of the information received in 
lieu of on-site verification and comments received from parties, we 
made certain changes to the subsidy rate calculations for Sertel Vida 
Metal A.S. (Sertel) since the Preliminary Determination. As a result of 
these changes, Commerce also revised the all-others rate. For a 
discussion of these changes, see the Issues and Decision Memorandum.

All-Others Rate

    In accordance with section 705(c)(1)(B)(i)(I) of the Act, we 
calculated countervailable subsidy rates for the individually 
investigated exporters and producers (i.e., Aslanbas Civi Tel Ve Celik 
Hasir San A.S. and Sertel). Consistent with sections 705(c)(1)(B)(i)(I) 
and 705(c)(5)(A) of the Act, we also calculated an estimated all-others 
rate for exporters and producers not individually investigated. Section 
705(c)(5)(A)(i) of the Act states that ``the all-others rate shall be 
equal to the weighted-average countervailable subsidy rates established 
for exporters and producers individually investigated, excluding any 
zero and de minimis countervailable subsidy rates, and any rates 
determined entirely under section 776 {of the Act{time} .'' Therefore, 
Commerce calculated the all-others rate using a weighted average of the 
individual estimated subsidy rates calculated for the examined 
respondents using each company's publicly ranged sales value for the 
merchandise under consideration.\6\
---------------------------------------------------------------------------

    \6\ With two respondents under examination, Commerce normally 
calculates: (A) a weighted average of the estimated subsidy rates 
calculated for the examined respondents; (B) a simple average of the 
estimated subsidy rates calculated for the examined respondents; and 
(C) a weighted average of the estimated subsidy rates calculated for 
the examined respondents using each company's publicly-ranged U.S. 
sale values for the merchandise under consideration. Commerce then 
compares (B) and (C) to (A) and selects the rate closest to (A) as 
the most appropriate rate for all other producers and exporters. As 
complete publicly ranged sales data were available, Commerce based 
the all-others rate on the publicly ranged sales data of the 
mandatory respondents. See Memorandum, ``Final Determination of the 
Countervailing Duty Investigation of Certain Steel Nails from the 
Republic of Turkey: All-Others Rate Calculation Memorandum,'' dated 
concurrently with this determination.
---------------------------------------------------------------------------

Final Determination

    Commerce determines that the following estimated net 
countervailable subsidy rates exist:

------------------------------------------------------------------------
                                                           Subsidy rate
                         Company                            (percent ad
                                                             valorem)
------------------------------------------------------------------------
Aslanbas Civi Tel Ve Celik Hasir San A.S................            3.88
Sertel Vida Metal A.S...................................            1.52
All Others..............................................            1.86
------------------------------------------------------------------------

Disclosure

    Commerce intends to disclose its calculations performed to 
interested parties in this final determination within five days of any 
public announcement, or if there is no public announcement, within five 
days of the date of publication of this notice in accordance with 19 
CFR 351.224(b).

Continuation of Suspension of Liquidation

    As a result of our Preliminary Determination, and pursuant to 
sections 703(d)(1)(B) and (d)(2) of the Act, Commerce instructed U.S. 
Customs and Border Protection (CBP) to suspend liquidation of entries 
of subject merchandise as described in the scope of the investigation 
section entered, or withdrawn from warehouse, for consumption on or 
after June 7, 2022, the date of publication of the Preliminary 
Determination in the Federal Register.
    If the U.S. International Trade Commission (ITC) issues a final 
affirmative injury determination, we will issue a countervailing duty 
order and require a cash deposit of estimated countervailing duties for 
such entries of subject merchandise in the amounts indicated above, in 
accordance with section 706(a) of the Act. If the ITC determines that 
material injury, or threat of material injury, does not exist, this 
proceeding will be terminated, and all estimated duties deposited or 
securities posted as a result of the suspension of liquidation will be 
refunded or canceled.

ITC Notification

    In accordance with section 705(d) of the Act, Commerce will notify 
the ITC of its final affirmative determination that countervailable 
subsidies are being provided to producers and exporters of steel nails 
from Turkey. As Commerce's final determination is affirmative, in 
accordance with section 705(b) of the Act, the ITC will determine, 
within 45 days, whether the domestic industry in the United States is 
materially injured, or threatened with material injury, by reason of 
imports of steel nails from Turkey. In addition, we are making 
available to the ITC all non-privileged and non-proprietary information 
related to this investigation. We will allow the ITC access to all 
privileged and business proprietary information in our files, provided 
the ITC confirms that it will not disclose such information, either 
publicly or under an administrative protective order (APO), without the 
written consent of the Assistant Secretary for Enforcement and 
Compliance.

Administrative Protective Order

    In the event that the ITC issues a final negative injury 
determination, this notice will serve as the only reminder to parties 
subject to the APO of their responsibility concerning the destruction 
of proprietary information disclosed under APO in accordance with 19 
CFR 351.305(a)(3). Timely written notification of the return/
destruction of APO materials or conversion to judicial protective order 
is hereby requested. Failure to comply with the regulations and terms 
of an APO is a violation which is subject to sanction.

Notification to Interested Parties

    This determination is issued and published pursuant to sections 
705(d)

[[Page 51341]]

and 771(i) of the Act, and 19 CFR 351.210(c).

    Dated: August 15, 2022.
Lisa W. Wang,
Assistant Secretary for Enforcement and Compliance.

Appendix I

Scope of the Investigation

    The merchandise covered by this investigation is certain steel 
nails having a nominal shaft or shank length not exceeding 12 
inches. Certain steel nails include, but are not limited to, nails 
made from round wire and nails that are cut from flat-rolled steel 
or long-rolled flat steel bars. Certain steel nails may be of one 
piece construction or constructed of two or more pieces. Examples of 
nails constructed of two or more pieces include, but are not limited 
to, anchors comprised of an anchor body made of zinc or nylon and a 
steel pin or a steel nail; crimp drive anchors; split-drive anchors, 
and strike pin anchors. Also included in the scope are anchors of 
one piece construction.
    Certain steel nails may be produced from any type of steel, and 
may have any type of surface finish, head type, shank, point type 
and shaft diameter. Finishes include, but are not limited to, 
coating in vinyl, zinc (galvanized, including but not limited to 
electroplating or hot dipping one or more times), phosphate, cement, 
and paint. Certain steel nails may have one or more surface 
finishes. Head styles include, but are not limited to, flat, 
projection, cupped, oval, brad, headless, double, countersunk, and 
sinker. Shank or shaft styles include, but are not limited to, 
smooth, barbed, screw threaded, ring shank and fluted.
    Screw-threaded nails subject to this proceeding are driven using 
direct force and not by turning the nail using a tool that engages 
with the head. Point styles include, but are not limited to, 
diamond, needle, chisel and blunt or no point. Certain steel nails 
may be sold in bulk, or they may be collated in any manner using any 
material.
    Excluded from the scope are certain steel nails packaged in 
combination with one or more non-subject articles, if the total 
number of nails of all types, in aggregate regardless of size, is 
less than 25. If packaged in combination with one or more non-
subject articles, certain steel nails remain subject merchandise if 
the total number of nails of all types, in aggregate regardless of 
size, is equal to or greater than 25, unless otherwise excluded 
based on the other exclusions below.
    Also excluded from the scope are certain steel nails with a 
nominal shaft or shank length of one inch or less that are a 
component of an unassembled article, where the total number of nails 
is sixty (60) or less, and the imported unassembled article falls 
into one of the following eight groupings: (1) Builders' joinery and 
carpentry of wood that are classifiable as windows, French-windows 
and their frames; (2) builders' joinery and carpentry of wood that 
are classifiable as doors and their frames and thresholds; (3) 
swivel seats with variable height adjustment; (4) seats that are 
convertible into beds (with the exception of those classifiable as 
garden seats or camping equipment); (5) seats of cane, osier, bamboo 
or similar materials; (6) other seats with wooden frames (with the 
exception of seats of a kind used for aircraft or motor vehicles); 
(7) furniture (other than seats) of wood (with the exception of (i) 
medical, surgical, dental or veterinary furniture; and (ii) barbers' 
chairs and similar chairs, having rotating as well as both reclining 
and elevating movements); or (8) furniture (other than seats) of 
materials other than wood, metal, or plastics (e.g., furniture of 
cane, osier, bamboo or similar materials). The aforementioned 
imported unassembled articles are currently classified under the 
following Harmonized Tariff Schedule of the United States (HTSUS) 
subheadings: 4418.10, 4418.20, 9401.30, 9401.40, 9401.51, 9401.59, 
9401.61, 9401.69, 9403.30, 9403.40, 9403.50, 9403.60, 9403.81 or 
9403.89.
    Also excluded from the scope of this investigation are nails 
suitable for use in powder-actuated hand tools, whether or not 
threaded, which are currently classified under HTSUS subheadings 
7317.00.2000 and 7317.00.3000.
    Also excluded from the scope of this investigation are nails 
suitable for use in gas-actuated hand tools. These nails have a case 
hardness greater than or equal to 50 on the Rockwell Hardness C 
scale (HRC), a carbon content greater than or equal to 0.5 percent, 
a round head, a secondary reduced-diameter raised head section, a 
centered shank, and a smooth symmetrical point.
    Also excluded from the scope of this investigation are 
corrugated nails. A corrugated nail is made up of a small strip of 
corrugated steel with sharp points on one side.
    Also excluded from the scope of this investigation are thumb 
tacks, which are currently classified under HTSUS subheading 
7317.00.1000.
    Also excluded from the scope are decorative or upholstery tacks.
    Certain steel nails subject to this investigation are currently 
classified under HTSUS subheadings 7317.00.5501, 7317.00.5502, 
7317.00.5503, 7317.00.5505, 7317.00.5507, 7317.00.5508, 
7317.00.5511, 7317.00.5518, 7317.00.5519, 7317.00.5520, 
7317.00.5530, 7317.00.5540, 7317.00.5550, 7317.00.5560, 
7317.00.5570, 7317.00.5580, 7317.00.5590, 7317.00.6530, 7317.00.6560 
and 7317.00.7500. Certain steel nails subject to this investigation 
also may be classified under HTSUS subheadings 7318.15.5090, 
7907.00.6000, 8206.00.0000 or other HTSUS subheadings. While the 
HTSUS subheadings are provided for convenience and customs purposes, 
the written description of the scope of this investigation is 
dispositive.

Appendix II

List of Topics Discussed in the Issues and Decision Memorandum:

I. Summary
II. Background
III. Subsidies Valuation Information
IV. Analysis of Programs
V. Analysis of Comments
    Comment 1: Steel Wire Rod for Less Than Adequate Remuneration 
(LTAR)--Applying Adverse Facts Available (AFA) to Aslanbas Civi Tel 
Ve Celik Hasir San A.S.'s (Aslanbas) and Sertel Vida Metal A.S.'s 
(Sertel) Purchases
    Comment 2: Steel Wire Rod for LTAR--Including Purchases That 
Exceed the Benchmark Price
    Comment 3: Steel Wire Rod for LTAR--Adjusting for Freight 
Charges
    Comment 4: Steel Wire Rod for LTAR--Removing Purchases From 
Resellers from the Benchmark for Aslanbas
    Comment 5: Steel Wire Rod for LTAR--Correcting the August 
Benchmark for Aslanbas
VI. Recommendation

[FR Doc. 2022-18053 Filed 8-19-22; 8:45 am]
BILLING CODE 3510-DS-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.